Toshiba 50M2U Display Issue - Help!

Colors are not displaying correctly on our Toshiba; dark colors are replaced with a green hue. It's most noticible in the initial boot up, with the red TOSHIBA logo appearing on top of a green screen that should normally be black.
I messed around with absolutely every setting on the tv. Tint, contrast, brightness, color, reset to factory settings, etc...
None of it fixes the issue I'm wondering, is it the LED lamp panel that's messed up? Has anyone ever had this issue before?
Please let me know if there's anything that can be done about it!

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Similar Messages

  • Mac Pro Display Issue HELP!

    Hello Everyone,
    Lately i just bought a new mac pro. recently i have been doing some video projects in final cut pro 7 (i know its outdated lol) in the video preview it seems that the video has some distortion to it, meaning the the video has a skewed effect to it of some sort. I upgraded from a 2009 iMac which i have never noticed this issue before! I don't think that it would be a hardware issue.. heres my specs:
    3.33GHz 6-core
    12 gigs of ram
    ATI radeon 5770 1gb ram
    Monitor: Samsung SyncMaster SA300
    I think that it may be the monitor.. as i soon plan on upgrading to a cinema display.
    If anyone has and idea what may be causing this unusual issue that would be greatly appreciated!
    Thanks in advance!

    I cleaned out my mac with compressed air, it was dusty, but the display flickering happened again.
    So I followed your advice and installed:
    Temperature Monitor
    http://www.bresink.de/osx/TemperatureMonitor.html
    Which showed that my memory module 1B and 2B were 70 - 75'C(160 -167'F). There was no reading for the graphic card so I couldn't tell if that was over heating.
    Then I installed:
    smc fan controller
    http://www.macupdate.com/app/mac/23049/smcfancontrol
    and increased the memory_cpu fan speed which lowered the temperature of the ram to 60'C (143'F).
    I even changed this ram's placement and put it in different slots.This ram was the same temperature in the new placements.
    Also this is the kingston 2gb ram without heatsinks. Ive used it for 1.5 yrs, and this is the first time its giving me these problems.
    Do you know how I can check if the graphic card is over heating? or is the problem just with the ram?
    Thank you for all your help!

  • 13" Macbook colour display issue HELP

    Hi,
    I hope someone can help with this, my cat has stood on the keyboard of my laptop and changed the colour scheme on my screen, Blue has gone orange and they other colours have completely changed have tried to change it back through the display but nothing has worked, pictures are coming out kind of like sepia but not. Hope someone can help, thanks in advance.

    Open the Universal Access pane of System Preferences, click on the Seeing tab, turn off White on Black, and drag the Contrast slider all the way to the left.
    (56318)

  • EMac Still Humming Along - Display Issues Though ... Any Help?

    I have a strange display issue to run by the forum here:
    Obviously my 2002 eMac is going to be suffering some display issues
    with the age the Mac is and all ... but besides the slightly "softer" screen focus
    (due to aging tube), I only have one other constant issue with the display.
    I know the brightness and contrast are not what they used to be when the eMac
    was newer, but here is the issue I am having. At least once a day now (after a few hours
    of use), I seem to be constantly adjusting the "brightness" and "contrast" setting to get the
    screen to a very usable brighter white field color. Normally now, the screen will get kind
    of "dim gray" and less "contrast white" ... without any brightness or contrast range left for
    me to adjust (the brightness and contrast settings in the system preferences/display pane
    are usually maxed out).
    To kind of fix this, what I've noticed lately, is that if I open the system preferences pane
    and go to the "display" settings, lower both brightness and contrast down to the lowest settings,
    then close out of system preferences .... then open system preferences again, and adjust the brightness and contrast up to slightly higher than the normal middle settings .... the screen brightness and contast are better and I have more "adjustment range.
    Here's my question: What would be making the "brightness" and "contrast" settings come back to
    a more "normal state" by performing the above sequence? I once thought the screen display was
    getting older and as a result, dimming normally. But now I am thinking that it may be more of a "software" issue that isn't keeping the brightness or contrast settings in hold.
    I pretty much perform all the basic maintenance procedures on a regular basis (ie: Permissions,
    repair, disc repair/check, DiscWarrior directory repair/check, etc.), so am I missing anything
    important here?
    Any thoughts or ideas what is happening here, or how to make the "brightness" and "contrast"
    hold their settings longer?
    Any assistance is appreciated. Thanks

    One other thing to look at is the setting in System Preferences, Universal Access, *Enhance Contrast* slider to make sure it is set to normal before you make the adjustment in Display.
    Have you ever tried calibrating your screen? It can also be done under Display?
    Generally an increasingly darker display is hardware related caused by heat, as well as the aging of the tube as you have indicated.
    I used to like cleaning out the dust from the interior of the eMac periodically using a large soft artist's brush to dust and a running vacuum cleaner to suck up the dust as it flew. Most dust accumulates on the fan blades and it always seemed to run quieter afterwards, though 'quieter' is a relative term on an eMac.
    The only tricky bit to this operation is the micro plug that connects to the power button. It is very small and fiddly to reattach.
    Only consider the above course of action if your are naturally happy with opening electrical equipment and realize it must be completely disconnected from any power outlet before you even start. Otherwise don't do it if you feel unsure.
    Your problem is unusual in your saying that it appears to be software related, from opening and closing your Sys. Prefs dialogue. It makes me wonder if anything is corrupting that file, and the settings it contains? It is peculiar.
    I wonder if deleting that particular file would help. With System Preferences closed, in Finder locate,
    ~/Library/Preferences/com.apple.systempreferences.plist
    and drag it to the trash.
    It will be recreated next time your open Sys. Prefs.
    I doubt if that will be the fix, but you might as well try it. As an experiment, instead of doing your described technique, instead try trashing that .plist and see if it achieves the same.
    Lastly when was the last time you replaced your PRAM battery? It is a cheap thing to do, and I mention it only because the PRAM chip does control some video settings and removing a possible aberrant voltage from the equation is a one more thing you can do.
    references:
    eMac: How to Replace the Backup Battery
    Resetting the PRAM and NVRAM

  • I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

    I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
    >CURVEBALL!!!<
    The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
    I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
    Any other suggestions? Please help!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • Display issue on brand new 2014 X1 Carbon Touch

    So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
    I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
    Link to image 1
    Link to image 2
    Link to image 3
    Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
    From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
    Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Pixelated enlarged screen - display issues related to external hard drive

    Hi.  I had an external hard drive plugged into my macbook.  I have a second monitor hooked up.  My screen is pixelated and enlarged (I have to scroll to see the whole desktop).  The icons are rearranged and very blurry. Everything is blurry and enlarged.  My files will open, but they are all blurry as well.  When I noticed these display issues, I realized the mac was not detecting the hard drive that was plugged into the usb port. I  unplugged it and then a LOT of folders with the hard drive name appeared on the desktop and then disappeared.  I know I may have misstepped by unplugging it, but what can I do now?  I have rebooted, shut down, checked zoom and screen resolution settings, and unplugged the monitor.  It's the same when I uplug the second monitor and just view my desktop on the mac.  Any ideas? Thank you in advance!
    NJ

    There is a multitude of posts here addressing the dangers of using Mackeeper. But just look at this:
    https://discussions.apple.com/docs/DOC-3691
    While this particular problem may not have been caused by Mackeeper, I urge you to uninstall this piece of trash.
    http://help.mackeeper.zeobit.com/Manual/GettingStarted/UninstallingMacKeeper.htm l

  • Display issues in FCP X on my MBP

    Hi there,
    I downloaded FCP X from the App Store this week and installed it and I am having a lot of display issues. My MCP is the 13.3" model from mid 2010 and the graphics card is compatible. I have 8 GB installed, so that should be sufficient as well. The areas where I am having display issues are:
    * I don't see the film strip in the event browser. I do see the listing of the files in the event browser.
    * I can not see the Inspector browser. Clicking on the i icon does not do anything and does not bring up the inspector browser
    * I can not see any of the effects. Clicking on any of the effects buttons does not do anything and does not bring up the effects browser
    I also notice that when resizing the FCP window, it does not get repainted properly.
    One last thing that is annoying, but I found a work-around for this, is the splash window shows when FCP has loaded. It does not open FCP with the same layout as I last used, in fact it is only showing the menu bar and nothing else.
    I hope that someone can help me with any of these problems. I was really excited about getting started with FCP X, but this has been a downer so far....
    Thanks.
    Edwin

    Hi,
    i had the same problem when i used the 10.0 version....but i solved in three ways:
    Restarting the computer;
    or
    Creating a new event,clic on new event and the old clips appeared like magic in the old event if you try to access it again....
    or
    Click and keep pressed the Event icon (the purple star); try to put it in "Machintosh HD" or any hdd you have the event. Magically the clips are again in the browser....
    Try......
    Cheers
    Lamberto

  • Photoshop CC display issues

    Hello
    I am new to Photoshop CC and I'm having some teething issues.
    For many years now I have been using CS3 and have just upgraded to Photoshop CC.
    The issues I am having are mainly display issues.  When looking for a file in CS3, I use to be able to see a small picture of the file when selecting a psd file....now in CC I can't see anything, even with the preview on  (see attachment so you understand what I am meaning - first file is the OLD CS3 view and second file is the new CC view
    Another issue is, I can't see the extensions in CC.....like: .jpg or .psd etc. How do I change that ??
    Can anyone help with my issues ??
    Cheers
    pwhinder

    Do you have CC on the same computer as you used for CS3?  What you are showing us is related to your operating system rather than Adobe.  There are various workarounds to show proper thumbnails for PSD files, but we need to know what your operating system is before advising.
    An alternative would be to use Bridge, which has thumbnails for all image formats, along with lots of other useful search and display filters.
    The file extension is also a function of your operating system.  If you are using Windows, go into Folder options, click on the View tab, and uncheck 'Hide extensions for known file types'
    Good luck

  • Several white spots in the middle of the display, please help!

    Hello!
    I've already searched through the discussions and found some people with similiar display issues. But I just had to post this question because I'm panicing.
    I turned on my MacBook Pro 1.83 (It's from July '06) today just to notice a white spot at the right center of the display. At first I thought it was just some smear from a fingertipp, but it wouldn't go away. So I changed my wallpaper from the colourful one I have to a solid light grey default wallpaper.
    Then I noticed that I have 6 ! spots all forming a circle in the middle of the screen.
    I've been treating my MacBook Pro like a baby and mostly at home. Right now I'm using it exclusively at home because it's now semester break for my University. So it wasn't moved. Just sitting on my desk.
    Does anybody know if Apple will repair this? I'm still in the first year, obviously and have bought the Care Protection Plan. So I have 3 years.
    Some of the people here and on the net seem to have theirs repaired under warranty. But with display, you never know what they'll say.
    Any help and answers appreciated!
    Greetings from Germany.
    MacBook White 1,83 Ghz   Mac OS X (10.4.7)   Early model from July '06

    I have now spoken to a local store which does repairs for Apple here.
    (Funny thing: in Germany you can't send the Notebooks back to Apple for repairs anymore. You have to go to a Service Provider, which could be a problem outside of big cities.)
    He's says it's a known problem which will be covered by the warranty:
    so if this happen to any of you, don't panic like me: Apple will repair it.
    Now I hope my replacement screen won't have any pixel failures.

  • Macbook display issues

    Hello!
    Way back a few months ago when I purchased my MacBook, I had some display problems from the beginning. I talked to a service rep and they walked me through some potential fixes but eventually sent out a box for me to return my macbook in for repair (I am an hour and a half away from closest apple store). I am a full time student, however, and did not ever get a chance to send it in. Later, I had issues that made my macbook unusable, and was forced to send it in. I was hoping that the display issues would have been fixed as well, but they weren't. Luckily, I primarily use an external display. But my problem has gotten worse and worse, my macbook is almost unusable on it's own at this point.
    I know I am still under repair warranty and was hoping someone could send a box out for me to return this before my fall term begins, so I could use it for note taking again. But I can't go into an apple store and I don't have phone support anymore, so I have to post this on here because there is no email support.
    I hope someone can help me!
    Thanks a lot,
    KJ

    I know you only get something like 30 days phone support but i think thats more for simple things if you get stuck or need help using something. You have a full years warranty so if you have a problem within the year you should be able to phone them up and get your problem sorted out under warranty. They will probably ask for your serial number but you should not have to pay for phone support. Just call the number listed on the apple site.
    When you speak to them make sure you tell them ALL the problems you have with your machine. When i sent mine in i made a text file titled 'Problems with this macbook' and left it in the middle of my desktop with the background image turned off to make it more visible. I dont know if the engineer ever read it but its an extra step that might be worth taking. You should still tell the guy on the end of the phone about all your problems though. They may well assign a work order to your machine going by what you tell them so if you only tell them about one problem the engineer that looks at it might not know to look at anything else.

  • End User - ESS Timesheet Display Issue

    Hi All,
    Hopefully I have posted this in the correct forum. I tried to search of the issue I have for an end user but had no success, so I thought since my post graduate study surrounds ERP systems and work with SAP every day, I though it was best to register.
    Now the issue I have here is, when the user goes into their portal ESS to view their timesheets, the display is unsual. They do not have an option to manually go back to previous weeks and the view of their timesheet is 'squashed' in (Timesheet Entry View) but if you scroll across to the right where the date and 'go to' function is, it has been cut off. There are no issues with any other users so it appears to be a local issue
    Currently, I have reverted back to IE7, checked for any add on's that may cause display issues, I have checked their roles and everything is normal. The only issue I can see is some conflicting issues is with the Browser and SAP.
    Any help will be appreciated.
    Edited by: A_Ali_ on Jul 19, 2011 1:05 AM

    Check the configuration setting for the profile that's being used by ESS. As this is where you can restrict user's ability to navigate forward and back from current week etc.
    Cheers,
    Brad

  • Any ideas why I would be having this display issue on just one page on my website?

    Firstly, the webpage URL that is in question is http://crawford3d.businesscatalyst.com/maya-models.html.
    The issue arises only when I publish the site and this is my second attempt to fix the issue. The first page was created with anchors that pointed to 7 embedded videos from youtube. The problem was similar where the page was sliced and the location of the videos where changed. I'm using the same master page for this page that I'm using for the other pages, so I'm thinking it is something to do with just that one page. My attempt at a fix was as follows: I used a composition lightbox to embed the videos so I could just click on the thumbnail to view the videos individually: however, the problem must not be with the method I'm using because I'm getting the same sliced display on the page. As you can see on the page a preview of the videos are also being displayed which is not supposed to happen when using a "lightbox". Please Help!!  Thanks

    Hi MrCrawford3D,
    In one of your embedded Youtube videos HTML, you have a number of closing <div> tags, and a closing <body> tag. That will be causing the display issues you are seeing. Might just be a copy/paste issue, but removing those should fix your problem.
    Hope that helps,
    Andrew

  • Display issue with LiveCycle Designer ES4 for cropped PDF in WIN7

    Hi,
    I am having issue displaying the cropped PDF file in the LiveCycle Designer ES4. The PDF files are cropped 3 inches from bottom using Adobe Acrobat 8 Professional. It used to display properly when we have a WinXP machine but once we moved to a Win7 machine, it cannot display the top part of the PDF anymore. Can anyone help on how to fix the display issue? Thanks.
    Kenny
    Environment:
    Adobe LiveCycle Designer ES4 V11.0.0.2013.0303.1.892433
    Adobe Acrobat 8.0.0
    Screenshots
    Win 7, LiveCycle Designer does not display properly
    Win XP, LiveCycle Designer used to display properly

    Thanks vNohria.
    I am having same issue with Adobe Acrobat 9. The Acrobat 9 cropped file is displaying properly under WinXP but have the same issue as above in Win7. This issue seems uncommon as I tried to look for similar issue  and couldn't find any.
    P.S. It's only the Design View in Win7 that has the issue, I can still see the file fine with Preview PDF in both enviornment.
    Design View:
    Preview PDF:

  • Weird OSX display issues after going to webpage, only thing that fixes is  Perm repair

    I have a bizarre issue that i'd love some input on. Late 2009 iMac, Mountain Lion (then Mavericks).
    I use Firefox to utilize a real estate website (Fusion MLS) for several months now. A couple of days ago, after i would log into the website and use it for a little bit, the rest of my tabs, apps, windows, would all start appearing as black boxes, or have glitched out (generally black) screen display issues. To be clear, other tabs inside the browser would be black, or partially black, and also the right half of my taskbar icons would be black silhouettes of the icon. BUT, the Fusion MLS website would still work fine. Closing the page, etc, would not fix the problem, it would be stuck like that no matter what i closed or opened, computer would function fine except for the display, but i couldnt see hardly any of the apps so I'd have to shutdown, but a simple reboot didnt fix it. After an hour of troubleshooting, I started off in Mountain Lion when the problem appeared, and in the process of troubleshooting I decided to upgrade to Mavericks to see if that would fix the problem, it didnt. Ultimately I discovered the only thing that fixes the problem is to boot into Safe Mode and Repair Permissions, then i can come back in as normal and everything is normal again (a standard reboot doesnt fix it, when logging back into OSX it would still have black silhouettes and all the app windows would be black).
    So after the above I decided to just start using a different browser to go to this Fusion MLS website (Safari). Which worked fine for a day, but now when i go to the website, i have no problems, but when i put the computer to sleep, and bring it back, the windows are blacked out and icons silhouetted. So back to safe mode, repair perms, and then it works again. When i do the repair perms, there are usually no verbose things that it says it repairs, sometimes it says something about the PrinterList being 0 instead of 80, but thats it.
    Any help or insight would be greatly appreciated, I'm completely dumbfounded....

    Now regular Repair Perms doesnt fix it, it has to be Diskwarriors Repair Perms. Also it happens anytime the computer is put to sleep for a length of time and brought back, regardless of whether the Fusion MLS website was gone to.

Maybe you are looking for