Toshiba 52HL167 popped and turned off - red light flashing

While on, the TV made a pop noise and lost power.  I let it cool overnight, but when I try to turn it on now, it makes some clicking noises as if it is trying to turn on from the middle top of one of the boards labeled "PE0365".  Do I need to replace the board and if so, where can I get one?
Thank you,
Mrworkman2

Try performing a system repair using PC Companion - This will factory reset your phone and erase all data
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Change display close actions, and turn off sleep light

    I know apple doesn't like to make these things easy to change but here goes... my powerbook is in my bedroom. when I close the lid, I must put something in front of the glowing sleep light or it keeps ME awake. is there a way to disable it? or does this fall into the same category as moving the song name column out of the first position in itunes? apple has made a decision (based on who knows what input) and the end user is stuck with it...?
    while we're at it: can I change the action performed when I close the lid? lock my user account but don't put the computer to sleep, for example? leave everything as it is but just turn off the display? mute the volume? show that I'm still online but attach an away message in adium? these are all things I could do with windows (tho I would never switch back) and I'm not sure why it seems so hard to do things like this with a mac.

    Welcome to the forum.
    If you're in to tech,you can read this.
    Description and modification of the different hibernate modes
    When the computer goes into sleeping mode, its behavior depends on a power management variable called hibernate mode. The hibernate mode can be set to different values:
    * 0 : Default sleep behavior on most Apple computers. RAM is still powered on while sleeping. Wake up is fast. Safe sleep is disabled.
    * 1 : Hibernation behavior. System is totally shut down while sleeping. RAM contents are dumped to disk. Wake up is slow.
    * 3 : Default behavior on Powerbook HD computers. RAM is still powered on while sleeping. Wake up is fast. Safe sleep is enabled, so RAM contents are also dumped to disk before going to sleep.
    Only a single mode can be activated at a time. In order to check what hibernate mode is currently active, the following command can be used in the Terminal application:
    pmset -g | grep hibernatemode
    In addition, users with administrator privileges can choose the hibernate mode. In order to do so, the following command can be used:
    sudo pmset -a hibernatemode X
    with X replaced by the value of the hibernate mode to set. You will be asked to enter your admin password. It will not be echoed.

  • Turn off Red Light that dots the "i" in ThinkPad

    Is there any way to turn off the Red Light that dots the logo "i" in the Thinkpad S440? 

    Hi adoman,
    I suggest putting following sticker on it, you'll never notice it's there:- http://cgi.ebay.com/Original-IBM-Lenovo-Sticker-11​-x-30mm-127_W0QQitemZ350223067619QQcmdZViewItemQQp​...
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Black screen, red light flashing

    I was downloading an app when a screen message told me to restart to continue installation. I pressed the Off button but now, despite pressing the start button, the phone will not come alive, although it was recently charged. There is just a black screen and the small red light flashes occasionally.
    Solved!
    Go to Solution.

    Hi HarryTyrrell
    Welcome to BlackBerry Support Community Forums
    Pressing the Off Button is not the Correct way to restart our BlackBerry device, please perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot. See if that helps.
    If not then try Starting your device On Safe Mode and on Safe Mode Uninstall the Application your Downloaded recently or which you think is responsible for that.
    KB17877  How to start a BlackBerry smartphone in Safe Mode
    Try it and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

    trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please
    This question was solved.
    View Solution.

    You can try removing and reseating the memory and see if that works.
    If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

  • 8700 will not start,red light flashes and hourglass comes on and off

    I have an 8700g Blackberry phone and I mistakenly downloaded an application that is only supported by software version 4.0 or greater. ( my phone had software version 2.2? ) . I had to replace the battery today and when I put in the new battery, it tried to start up but the red light comes on and the hourglass flashes on and off but after two hours it will still not start up. What should I do?

    Kendal wrote:
    Hi there,
    My bb did the same thing, but when i did what you said, the app loader said that there is a fatal error, and that the code is [A:0x0000000E]; and a red light flashes twice in quick succssion on the bb, can you please help me out here? thanks K.P. :-)
    Hi and Welcome to the Community!
    Hmmm...that sounds very bad. But, let's try some things anyway...a total wipe and reload, using one of the following utilities:
    http://forums.crackberry.com/forum-f3/how-wipe-jl_cmder-53502/
    www.bbsak.org
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPod shows red X on the screen and turns off by itself

    my 80GB iPod was just sitting on my desk when all of a sudden it turned off. i tried turning it back on, the apple sign shows, then a big red "X" mark shows on the screen and below it shows a link to apple's support page - "www.apple.com/support/ipod".
    I clicked everything i can and nothing happens, i plugged it in the computer and iTunes shows nothing. I tried reseting it many times but it'll just show the same red X and turn off again... is my ipod broken for good or can i fix this?

    Hey, I had the same problem and did everything I could think of to fix it (apple store, resetting it, draining the charge). Then I started freaking out because I didn't want to spend the money on a new hard drive or a new iPod. So I did a little searching and found this on another forum:
    "Some times when you drop your ipod the lens inside skips. (kinda like a record player) reset your ipod by holding the middle and menu button until you hear clicking. then with one hand hold the ipod firmly and hit the side of it onto the PALM of your other hand. Sometimes this jumps the needle back into place but not all the time."
    I didn't drop mine like mentioned ablove, it just happened, but I've been frustrated and was going to try anything to not spend another $200+. I used the palm method, and it didn't work. But then I hit the side of the ipod on the ground (carpet of course) about two or three times. It made a funny noise and then turned on and started working like before. What a relief. Hope this helps.

  • My BB won't turn on the red light flashes and the key's light up

    Hi
    I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer.  The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on.  I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy.  I have only had this phone since July last year.  I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
    Louise

    Hi,
    The way you presented it made me think it had just happened.
    So you have had the phone since July has it ever worked?
    Most likely you are missing some or all of your device OS and you'll need to reload the device.
    Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
    Thanks,
    Bifocals
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • TS1574 you should mention that the audio output jack is fleaky, try plugging and unplugging until red light goes off !!!

    It should be mentionned in the Apple help that the audio output jack is sometimes fleaky, as it does not reclose the speakers contacts correctly when an earphone jack is removed. This can be checked by looking into the computer audio jack and seeing a red light, which confirms the optic output is active. Plugging and unplugging the jack until the red light disapears is the cure, unless you are unfortunate enough to have a broken audio jack. Good luck !

    Same here. I don't remember doing anything out of the ordinary. I was working in Parallels on getting a AM station to stream via some web interface. Next time I went to play sound on the internal speakers, no go.
    I've tried zapping the PRAM, toggling the headphone jack and the toothpick thing. Nothing seems to work.
    I've also noticed that I get sound in my headphones in iTunes but not in Garageband (someone had suggested that starting up Garageband would reset things.
    Any other ideas out there?
    Is there a file that could get corrupted that I could switch out of my back up?

  • Phone wont turn on and red light flashing 5 times with pause/s in between

    i was charging my phone, after 30 minutes i unpluged the plug from the mains and typed in my password. from there on the phone went completely blank and all i was seeing was a red light flashing. I charged the phone for 12 hours and now i cant see the red light anymore. The only time i see the red light flashing is when i use the usb or the phone charger. At the moment the phone is completely blank i cant switch it on. Also ive tried using the usb which didnt help my laptop doesnt recognise it neither does the desktop manager.
    Message Edited by SgtAssassin on 10-11-2009 05:22 AM

    Hi and Welcome to the Community!
    Without the use of the charging port, tests will be more difficult, and results less definitive. Nevertheless...this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note please that "known good" and "new" are not necessarily the same thing...while rare, a new battery certainly can be defective. The best (and, btw, least costly) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    If the result is that your BB is the issue, then you will need to seek out a local (to you) shop with a qualified BB hardware technician to give you a proper evaluation and estimate. If you remain in warranty, you could instead seek support under those terms (assuming your warranty is not void).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Satellite A660 How can i turn off the lighting of the power button?

    Hello, I recently bought a new Toshiba A660-1FL.
    However bothers me is the lighting of the multimedia keys, if I work in the dark.
    In Bios I could turn off the led illumination, but the power on/off button is still lighting,that distracts me when i am working.
    This notebook has two power LED, so the power on lighting is in my opinion, unnecessary.
    My question is: How can i turn off the lighting of the power button?

    Here you can see the LED with the same function in front of you: http://s3.imgimg.de/uploads/t009aae62jpg.jpg
    Yes in fact, the difference is color, design, but also location and brightness of the LED.
    For me, this LED is too bright and it is distracting in the dark, as you can see here: http://s3.imgimg.de/uploads/leddf570760jpg.jpg
    I was today at a local electronics store, and saw that Toshiba has the brightest Power LED on A660, but why it must be placed under the LCD and not in the front as in my old notebook Toshiba A210.
    I also had the idea with a tape, but it would look ugly, and it must be removable without residue.
    P.S. Also the fingerprints on the glossy keyboard do not look nice.

  • Q10 has locked me out completely. Won't turn on but red light flashing to specific pattern

    Help! Turned my Q10 off yesterday to reset as emails not getting through. Now won't turn back on - just a little red light flashing at top right of device in a specific pattern. Nightmare-any ideas??

    Connect your Q10 to the known working OEM wall outlet charger.
    After being connected several minutes, LEAVE it connected and remove the battery a minute, and reinsert... does it reboot?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HP desktop won't start, red light flashing and beeping, loud fan

    Yesterday it was working just fine. I turned it off for the night and when I tried to turn it on this morning, a red light was flashing and beeping as well as the fan making a loud humming noise. I've read the the beeping and flashing means something. I didn't keep track of the number of flashes and beeps though. After the beeping and flashing I turned the computer off then back on. This time there was no red light, flashing, or beeping. Nothing appeared on the monitor either. After about 10-20 seconds of it being on, the fan started to hum really loudly again.
    It's an HP Compaq dc7900. I've only had it for about 3 months and it was fine up until now.
    Any help? Thanks.

    Hi
    I'v checked the specs for your HP and Acer machines and yes it will be fine to cross over RAM modules they are identical in speed and architecture . Please don't forget the last post about removing the sources of power before you go inside the PC to check RAM . Other thing is if your HP has more than one RAM module remove only one stick first and try to boot . If it still won't boot with that module take that one out and try to boot from the other before you look to swap over modules from Acer machine . Don't forget to re connect your monitor to see if you get display with one / two etc modules . Post me back your findings
    Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • When trying to use App Store I get a message "could not sign in an unknown error has occurred." I reset our connection and turned off iPad. Any suggestions?

    When trying to use the App Store, I get a message "could not sign in, an unknown error has occurred,  any suggestions what is wrong?  I reset our Internet and turned off the iPad. 

    Sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.

  • Z2 wont turn on red light

    my xperia z2 abruptly turned off while there was 10% battery was remaning since then i tried every thing pressed all three buttons together power volume and tried that red button on the side of sim tray nothing is working out this is very worrying moment for me plz some help

    You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Maybe you are looking for