Toshiba 55L7453DG doesn't show subtitles
Hi everyone,
I'm new here and recently bought a new L7 tv. I'm having trouble loading subtitles with certain movies i have on a usb stick. Specifically, i noticed that if the movie is MP4 then the tv won't show the .SRT subs at all. However if the movie is MKV, then everything works fine. Has anyone else encountered this problem and if yes, have you found a solution? I'm quite surprised to see that a top quality 2013-2014 tv won't recognize subs.
I hope someone will help and thank you in advance for any reply.
Hi
Several people on this forum have reported about such issue. Obviously mp4 format is not supported.
Please check this interesting posting.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=77662
Similar Messages
-
Toshiba harddrive doesn't show up on macbook pro but shows up on macmini
1 tb toshiba harddrive won't show up on macbook pro. Other external harddrives have showed up on Macbook pro.
The toshiba does show up on my mac mini.
I checked in Disk Utility to see if it showed up there in the macbook pro and it did not.
macbook pro - maverick
mac mini has 10.8.5
Does anyone have a clue? Thanks for any tips.I had this same problem with an external seagate drive I was using as a time machine backup for my iMac. When I installed/updated OS 10.9 on the iMac, the seagate drive would not show up on the iMac.
The seagate drive shows up on my MBP/r even after updating the MBP/r to OS10.9
I just checked again to make sure this info is accurate, it is accurate.
The seagate drive still doesn't show up on the iMac but does show on the MBP/r.
The seagate drive does not show in disk utilities on the iMac but does show on the MBP/r.
I finally bought another external HD for my back-ups, I needed that drive!
BTW, I did not buy another seagate.
I have a couple toshiba external drives and, so far, they are working ok, on both my computers.
I don't get it either. -
Streaming iTunes rented movie with AirPlay from MacBook Air doesn't show subtitles
In addition: the pictures weren't streamed flawlessly. Sometimes the picture totally disappeared.
Why use Airplay? You can access the rental under the Computers tab on AppleTV - a new rentals category should appear.
-
I'm creating some subtitles within DSP 4 but they doesn't show on the simulator when I click on the subtitle menu. Any suggestions?
Thanks a lot for any infoHi
Several people on this forum have reported about such issue. Obviously mp4 format is not supported.
Please check this interesting posting.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=77662 -
DVDStudioPro doesn't show graphic subtitles any more
My DVD Studio Pro 4.2.2 has shown graphic subtitles (tifs) until kind of recently.
Even earlier created projects doesn't show them any more.
What happend. Has anybody else noticed this thing?
How can I make them visible again?
I'm on OSX 10.6.8There shouldn't be a need to mouse over the tab to see what the title is. The space is wasted otherwise, so why not display the title there whether or not the menu bar is also displayed?
I attached a picture showing exactly what I'm talking about, excuse the quick ms paint job. -
My
Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder.
The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8tried another cable (from a camera) with no joy. However after turning off TM and searching for the EHD and not finding it, I revisited Disk Utility and can 'see' it there. The bad news is that it says,
Verifying volume “Toshiba 1TB”
Checking Journaled HFS Plus volume.
Invalid extent entry
The volume could not be verified completely.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Toshiba 1TB”
Checking Journaled HFS Plus volume.
Invalid extent entry
The volume could not be verified completely.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." -
Created a 70 page photo book and now the title including subtitle doesn't show, but seem to be there, because the photo is ticked to be the title. Now I am scared to get a beautiful grey title instead of the table mountain in SA: Do I need to be worried?
Try the following::
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
iPhoto 8 (09) and earlier- run the options indicated
iPhoto 9 (11) and later -run Option #4 to rebuild the database -
M3000: show-disks doesn't show all disk.
Hi all,
I have to setup one M3000, when I want to create a devalias, I type show-disks, but it doesn't show all the disk, it only show 2
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
So, a is disk0 1 2 3 ?
and
b is disk 0 1 2 3?
thanks
Please help
====================================================
{0} ok probe-scsi-all
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0
QLogic QLE2560 Host Adapter FCode(SPARC): 2.03 06/30/08
Wait for link up -
Firmware version 4.03.02
Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate
SFP state: 8Gb Present
/pci@0,600000/pci@0/pci@0/scsi@0
MPT Version 1.05, Firmware Version 1.31.00.00
Target 0
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e813d912 PhyNum 0
Target 1
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84aaf3e PhyNum 1
Target 2
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84ab082 PhyNum 2
Target 3
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e8392a42 PhyNum 3
Target 4
Unit 0 Removable Read Only device TEAC DV-W28S-W J.0A
SATA device PhyNum 4
{0} ok
{0} ok show-disks
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
c) /iscsi-hba/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
{0} okHi.
It's not bug, it's a feture. :)
show-disks show available controlles, that can have connected disk.
For create alias you should manualy add what disks exactly you want use.
disk0 /pci@0,600000/pci@0/pci@0/scsi@0/disk@0
disk1 /pci@0,600000/pci@0/pci@0/scsi@0/disk@1
disk2 /pci@0,600000/pci@0/pci@0/scsi@0/disk@2
disk3 /pci@0,600000/pci@0/pci@0/scsi@0/disk@3
Generaly this aliases alredy created at POST.
Check output of devalias
Regards. -
Satellite C850-A628 Headphone jack on my toshiba satellite doesn't work.
Satellite C850-A628
Hello,
Headphone jack on my toshiba satellite doesn't work. When I plug my headphones in the computer speakers still play. I know its not the headphone because they work on everything else I've tried. When I go to control panel > hardware and sound > sound it doesn't show the headphone jack. It only shows speakers. how do I get my headphone jack to work?Satellite C850-A628 (PSKCV8-0T00XAR)
This is actually the peer support forum for Toshiba USA. But, while you are still welcome here, yours would appear to be a Toshiba Middle East model. Toshiba Middle East is really handled by Toshiba Europe, and you can find their forum here. You may want to consider using that in the furture.
I am not sure this will work on your system, but it's worth a shot. With your headphones unplugged, click on 'Start' -> click on 'Control Panel' -> click on 'Realtek HD Audio Manager'. Look for the file folder icon near the top right of that window, as in the attached pic. Make sure the check mark is on 'Enable pop-up dialog, when device has been plugged in' -> click 'OK'. Now, plug in your headphones -> when you see the 'The current connected device is:' dialog box pop up, put the check mark on 'Headphone' -> then click 'OK'.
Test your headphones again, and see if your laptops internal speakers now turn off.
Let us know what happens. Good luck.
Mike -
A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.
It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....
-
My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.
The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao. -
My iPod Touch 1G doesn't show up in my iTunes and in My Computer.
My iPod Touch 1G doesn't show up in my iTunes 10.6.3.25 and in My Computer.
the iPod can charge when I connect it to the laptop but it doesn't appear in iTunes and My Computer.
there's also no "apple.." in my universal bus controllers.I cannot sync, what do I do?
I'm using Windows 7 Home Basic.iOS: Device not recognized in iTunes for Windows
-
So I tried to update to the newest Itunes. It locked up my computer part way thru the install. Black screen, computer turned itself off. Now anytime i try to do anything with Itunes it shuts my computer down. I can start up fine in safe mode but when i try to uninstall from there, Itunes doesn't exist. the other apple programs do, but no itunes. when i try to uninstall the other programs in safe mode it tells me it can't because the windows installer isn't loaded. I have system restored to over a month ago and itunes still doesn't show up in add/remove programs. however, i can open itunes. it just tells me a file didn't get installed and to uninstall and reinstall. So, how do i remove a progam that doesn't think it exists and crashes my computer when i try to do anything related to it??? I'm out of ideas. running windows vista.
I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will. -
BPM console doesn't shows the deployed application in BPM console
Hi Friends,
i developed a BPM process in Jdeveloper and deployed in the weblogic server. Enterprise manager shows that application but in BPM workspace doesn't shows that application to initiate the process form BPM console. any one can you please let me know why the weblogic server shows this peculiar behavior?
Thanks
Hari MandadapuDid you create an initiator task with corresponding Task Flow within the BPM Project?
Only when you add an initiator task it will show up in the BPM Workspace.
An initiator task differs from a regular human workflow task.
Otherwise you can only start the process from Enterprise Manager or Webservice Call. Check out if the process show up in Enterprise Manager.
Regards,
Martien -
syncing iphone and can't seem to transfer audiobooks that i have put in a playlist. Sync menu doesn't show all playlists. Help
I have the same problem with podcast playlists. When I go to the music window in my iPhone devices section, the playlists I have created on my macbook pro in iTunes do not appear as an option to sync with the iPhone. I know some web radios streams, like the BBC, won't transfer because of compatibility issues, but the playlists of podcasts that I have created consist entirely of podcasts downloaded from the podcasts section on the iTunes Music Store. They used to show up and sync properly before I upgraded to OS 5.1.1, but now they don't.
Does anyone have a fix and am I right in surmising that the cause is a glitch in OS 5.1.1?
Maybe you are looking for
-
TRIED EVERYTHING!! Can't get Itunes to open
Can I delete everything on my computer relating to Itunes and just download ver. 6 again and install it? I've searched through these discussions extensively and I think I've tried everything to get Itunes to work. With no luck... PLEASE HELP!!!!
-
Outgoing Payments to Open Item list not Replicating
Hi Everyone, In Banking -> Outgoing Payments -> Outgoing Payments There asre few payments with different payments values, which has +ve amount and the -ve amount for a vendor. however when we check the amount in the Reports-> Sales & Purchasing-> ope
-
How do i find my iphone if its lost?, how do i find my iphone if its lost?
how do i find my iphone if its lost?
-
Hi all Can you tell me if there is a big quality difference between Apple Pro Res and Apple Pro res (LT) , is LT a acceptable format for broadcast? Thanks in Advance
-
Can one import their iTunes library onto a 7th Generation NANO on OSX 10.6.5?