Toshiba 55VL963 - TV to USB function reports write errors

Hi,
I have 55vl963 TV with lastest firmware 6.9.MD.1
I am trying to get channel lists and other settings through Hotel clone function.
However, it seems the TV to USB function often reports write errors (or sometimes ends successfully but generates corrupted files).
I tried different USB media, formated in FAT16 or FAT32.
Thanks for any help on resolving this.

Tonny, I'm not sure about my 32RL900A, as I have not had any problem with USB recording, (and have forgotten whether it has its own "Format" function), but suggest that you look in the setup area of your menu, and see if your model has the "Format Disk" function, and if so, see if your model will format your USB stick, and then, if so, use it.
As I said, it has been a little while since I plugged a USB stick in to ours and it has been left in and used a number of times, without any problems, so such things have a habit of being forgotten, when everything is going smoothly!!!
donhe7

Similar Messages

Report Painter/Report Writer Error

Hi Gurus,
When I try to create a library in report writer with a custom Special Ledger line item table ZZFCCA, I get the error
"Table ZZFCCA is not installed in Report Writer.
Message no. GR493
Diagnosis:
The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables. This is not the case for table ZZFCCA."
I would appreciate any kind of help to resolve this.
Thanks,
Ram

Hello,
The answer is in your question itself. You are using customized table, which is not suitable, the properties of this table needs to be changed. Take the help from ABAPer.
SAP Notes 53245 and 37611 may be helpful to you.
Regards,
Ravi

Report Writer - Error

Dear Gurus,
I am getting an error, when i copied an existing report and started working on the copied report...
All the old rows have been deleted, except one which when i try to delete gives this error:
KH551 "You cannot delete, because element % is dependent"
Could you let me know what i could do????
Thanks.
regards,
Raj

Dear Raj
There might be an additional invisible formula column in your report. This
column contains the same formula as the visible one. The problem is,
that you are not able to mark & delete this column (you can't point on
it). For that reason, it's not possible to delete the other columns.
The invisible column is not just a simple hidden column, but a column
which was stored in the past in an unknown way and had never been
displayed with error. The error only occurs after a specific treatment
of the report and is being passed onto each and every copy of the
report i.e. Copy Report A and Name it as Report B. The error occurs
however very seldom.
The only symptom of the 'invisible' columns is, you cannot delete the
columns which are being used in this 'invisible' columns as the formula
columns.
Which means, only if you can manage to do the same things as what you
have done previously as to create the report, you'll get the same
problem.
You can't see any formula column in your report, but you are not able
to delete one (or more) of the remaining columns
The only way to trace the 'invisible' column is to debug the report
painter and to identify the internal tables where the columns are
stored. Unfortunately, no other solution has been provided as the
cannot be recreated (other than copying the report).
The easiest way out is to create the report all over again from
scratch.
Regards
Siva

Report Writer/Painter Function Module

Hi all:
Is there any way (function module, class method, etc) to obtain the information generated in the FI-CO Report Writer/Painter?
Best Regards

Dear Vicotor,
Can you help me in the said function?
Thanks
Ayaz

Functional Area Reporting using Report Painter/Report Writer

Hi,
Could anyone let me know how we can draw up report for a company with functional areas using Report Painter/Report Writer?
Our client wants to draw Financial Statements on the basis of Functional Area.
Thanks & Regards,
Sajan C P

<a href="http://help.sap.com/saphelp_47x200/helpdata/en/5f/b77625a0f811d39755006094b969cf/content.htm">Creating a Profit and Loss Statement with Cost of Sales Accounting</a>
FSI4 for creating forms and FSI1 for creating assocaited reports.
Standard report 0SAPPRALO-01 Annual Profit and Loss Statement by functional area, can be checked, under FSI3 Type 005.

Error generating report in Report writer (GR214, short dump)

Hello
We are making a report in GGR2. When generating the report group, we have dump with error:
Short text of error message:
Internal error.: SAPMGRW2, Include: MGRW2F20, FORM: GEN_DATAFI
ELD.
Long text of error message:
Technical information about the message:
Message class....... "GR"
Number.............. 214
Variable 1.......... "SAPMGRW2"
Variable 2.......... "MGRW2F20"
Variable 3.......... "GEN_DATAFIELD"
Variable 4.......... " "
I have generated as well via GR52 with the same result.
The report i try to generate has about 500 lines, uses a number of existing sets and has simple formulas in it. When i restrict the number of rows to say 400 I donu2019t have the issue. Is there a restriction to rows in report writer?
Thanks for your help
Kai

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

What is the significance of report writer and report painter

hi all,
can anyone throw light on report write and report painter, when and why it used with examples.
thanxs in advance
regds
hari

Dear Hari,
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Regards,
Naveen.

Getting a weird error in Report Writer Report(ABAP Reporting tool)

Hi Guys,
If anybody has worked on Report Writer Report.Can you help me in this regards?
There is a peculiar problem for the (Column block) .In the Column block there are 3 key figures(Quantity,Local Currency and Group Currency).
Of these in the output of the Report Writer Report the Quantity Column is not getting summed up properly.Though the other 2 columns(Local Currency and Group Currency)are reflecting the proper summed up data.
According to the tables, all of them are reflecting the accurate data.But only for the Quantity column though its reflecting the actual data,but the summation for it is not reflecting the correct data.
Can anybody tell me if we can attach screen-shots for Questions posted in Forums?
Please help me in this regards.

Hi James,
Thank you for your quick response.
I checked the report and the remainder functions is not being used.
The only formulas being used in the report are the following.
UpperCase ([1])
+ ", " + - This is set to @name
{@name} + " (" + + ")"
There are some formatting formulas set on the above values, but other than that, there is a sql query and the "select distinct rows" and "perform grouping on server" is selected.
Thanks,
Jayashree

ABAP Report Writer

Dear All
Can some one help me to have a good document / manual for ABAP - Report Writer.
Regards,
Venkat
Moderator Message: Please do not ask for documentation here. Instead, Search for them.
Edited by: kishan P on Oct 19, 2010 10:04 AM

hi SV,
I guess Report Painter as Report Painter has 90% of the functionality that Report Writer and Report Writer functions can be accessed from within the Report Painter
Regards,
Santosh

Report Writer Object Names

Can anyone tell me what these objects represent in Report Writer. They are in a transport that is causing problems in the receiving system:
RWRO
RWSO
RWJO
RWMO
Thank-You.

Hi
check this
Report Writer functions can be accessed from within the Report Painter.
The difference lies in the GUI of the report painter.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Refer the following links :
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Regards
Anji

Selection screen of report writer

Hi all,
I am working on a report writer .In this report writer there is one column set which is a key figure set.
It has two key figures,each is associated with one additional set.
The fields of additional sets are as follows.
Additional set 1 -
period range1
year1
record type
Additional set 2-
period range2
year2
record type
Its selection screen is automatically taking these as a parameters from additional sets in the following sequence.
year1
year2
period1 to
period1 from
period2 to
period2 from
I want this sequence to be different i.e. as follows:
Period1 to
period1 from
year1
Period2 to
period2 from
year2
Can anyone tell me how can I achieve this.
Thank You.

Here is the Code:
DATA: lt_params TYPE STANDARD TABLE OF alv_s_param_wp,
lwa_params TYPE alv_s_param_wp,
lwa_msg    TYPE bapiret2,
gt_msg     TYPE TABLE OF bapiret2,
lv_dcpfm   TYPE xudcpfm,
gt_data    TYPE STANDARD TABLE OF grwwebdata.
CLEAR:gt_data,
lwa_msg.
REFRESH : gt_data, gt_msg.
* SET REPORT painter paramters
lwa_params-pname = '$PARAMETER[$1KOKRE'.
lwa_params-pvalue = c_ccode.   '' (company code = 0010)
APPEND lwa_params TO lt_params .
lwa_params-pname = '$PARAMETER[$1GJAHR'.
lwa_params-pvalue = p_year.    (2011)
APPEND lwa_params TO lt_params .
lwa_params-pname = '$PARAMETER[$1PERIV'.
lwa_params-pvalue = s_month-low.     " (1)
APPEND lwa_params TO lt_params .
lwa_params-pname = '$PARAMETER[$1PERIB'.
lwa_params-pvalue = s_month-high.    "(12)
APPEND lwa_params TO lt_params .
lwa_params-pname = '$PARAMETER[$1VERP'.
lwa_params-pvalue = p_plan.        " (0)
APPEND lwa_params TO lt_params .
lwa_params-pname = '$SELECT-OPTION[$1KOSET'.
lwa_params-pvalue = 'I[EQ[1110[3190'.
APPEND lwa_params TO lt_params .
CALL FUNCTION 'CRIF_RW_WEB_CALL_REPORT'
EXPORTING
i_report_group = '1SIP'
*     I_PERS_APPL     =
*     I_NEW_SELECTION =
*     I_DISPLAY_LIST =
*     I_APPL_ID       =
*     I_VAR           =
TABLES
it_params       = lt_params
et_data         = gt_data
et_messages     = gt_msg.

Report Writer/Report Painer/ABAP classical reports

Which one is good if there are lot of reports to be written.Thanks.

hi SV,
I guess Report Painter as Report Painter has 90% of the functionality that Report Writer and Report Writer functions can be accessed from within the Report Painter
Regards,
Santosh

Report Painter/ Report writer

Hi,
Can anybody please explain me what is report painter with an example to how to create it if u have any document please forward it to me <REMOVED BY MODERATOR>
also please explain me what is characterstics, key figures set and variables,
<REMOVED BY MODERATOR>
Regards,
Sunil Kumar Mutyala.
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 6:19 PM

Hi,
Report Writer enables you to report on data from multiple applications. Using functions such as sets, variables, formulas, cells and key figures, you can create complex reports that meet specific reporting requirements.
The Report Painter is similar to the Report Writer, but is simpler to use.The main components of report painter are characterestics and basic key figure.
The majority of reports end users use in the R/3 System is Report Painter reports. Most of these reports (@ 80+ %) began as Report Writer reports.
The major difference is Report Painter uses a graphical interface (analogous to Notepad and MS Word).
Very few R/3 users employ Report Writer however, many still use, modify and develop reports using Report Painter. Report Painter permits complex groupings and drill-down reporting very useful for such applications as FI-CO and SD. It can also be used interactively allowing users to enter variables for specific steps; thereby permitting drill-across' functionality.
However, Report Painter does have its limitations; it can display only numeric data (excluding column headers) therefore, short text, etc. is not available. It is much easier (quicker) to modify than ABAP and requires no ABAP expertise however, many combine Report Painter with ABAP reports to fill-in many of the missing pieces. Layout design is archaic and rudimentary ~ therefore; many use Report Painter to retrieve and massage the data' and eventually export it into Excel for end use.
also check the link
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
[http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp]
<REMOVED BY MODERATOR>
Cheers,
Chandra Sekhar.
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 6:19 PM

Report writer Authorization on selection screen

Hi All,
In transaction GR55 (to execute the report group), when the user enters the selection criteria for the report group, I want to validate the
'Profit Center group' and 'Profit center values' fields. The way it should be validated is, it should check the entry for the 'profit center group' or 'values' entered against the 'user name' in a Ztable for that user. If there is no entry in the Ztable matching that 'User name' and 'profit center group or values' , it should give an error message. I have seen that there is a user exit 'EXIT_SAPFGRWX_001' (Authorization check on initial screen).
But my problem is, in this functional module (code is shown below), the table 'I_T_SELSCREEN_PARAMS' has only one filed for both 'Profit center Group' and 'profit center values'.
1. when I enter 'Profit center group' 'ABC' in my selection criteria, I_T_SELSCREEN_PARAMS has following values.
I_T_SELSCREEN_PARAMS - selname = '%8A-PCHI'.
I_T_SELSCREEN_PARAMS-low = '01061000ABC'.
2. When I enter 'Profit Center Values' as some '3001000' to '3001020' inn the selection criteria, I_T_SELSCREEN_PARAMS has following fields,
I_T_SELSCREEN_PARAMS-selname = '%8A-PCHI'
I_T_SELSCREEN_PARAMS-low = '0002$ZSLP&8A-PCHI'.
here ZSLP is the report group name.
I don't understand how to get the values '3001000' to '30001020' into my user-exit in case 2.
Is there any other way of doing this? has anyone used this user-exit? Please help me.
Thanks,
Krishna
FUNCTION EXIT_SAPFGRWX_001.

Hi Krishnakumar Ramadoss,
For your requirement to have authorization, SAP provides facility in report writer/painter to give authorization groups.
Go to GR52.
Input your report group name.
Click on Header (Cap symbol) or F5.
At this header screen , you can see a field where you can provide Authorization group.
Try this. It may help you.
As a note:
Report writer / Report painter reports are reports which are created with zero percent coding.
The SAP generated program (E.g: GP3ICYT39FHJLOYBA2025DBAE1V213) cannot be changed or modified.
The only coding that you can do in a report writer are the formula's and logic that you can write in variables of the report writer / painter.
Regards,
Subin John

Plant Maintenance Reports & Report Writer/Painter

Has anyone ever used Report Painter or Report Writer to produce SAP Plant Maintenance Reports? If so, what was your experience in using this tool and how difficult is it to produce reports?
The report that needs to be generated is for overdue PM orders (PM09) ....these are scheduled preventive maintenance orders.
We need to be able to determine if they are completed and if they are on time. This report needs to have the flexibility to choose the following
Functional Locations
Equipment
Plant sections
Main Work Center
Basic finish date / Planned Date / Overdue date (to be determined)
Maintenance Plan
Maintenance Activity Type
Group
We need to be able to run a chart from this data to show how many PM's are behind, how many were completed on time compared to the requirements, and any other chart that would be available (i.e. pie, line, bar etc.).
Thanks
Ruthie

Hi,
the fields that you want in ur report must be available in ur operating concern data structure,,,
pls check if the characteristics and the value fields that you require is available in the data structure,,,
check KEA0 transaction..
Reward points if useful

Toshiba 55VL963 - TV to USB function reports write errors

Similar Messages

Maybe you are looking for