Toshiba A60 USB 2.0 Host Controller, Can Anyone Help?
Hi everyone,
I recentry purchased a new Toshiba Satellite A60 notebook. Of course, instantly I formatted it, and installed XP Pro, because I didn't need half the programs that the laptop comes installed with.
Problem is now that all they gave me was a recovery disk (DVD). I have found the ATI and RealTek Drivers with no problems off the Toshiba Download Centre, but I cannot find any USB 2.0 drivers (Host Controller). The USB goes really really slow now. I tried just using a Generic Host Controller, but it goes 10 times slower then if I dont have any controller in there lol.
Im thinking maybe I can get Norton Ghost, and try to view the files that Toshiba used in their Recovery Disk.
I am still stunned why they haven't given me a Drivers CD, first time this has happened to me.
Any Suggestions? Or maybe anyone know where I can get the Host Controller from, that suits the A60?
Thanks in Advance!
HI Ozzie,
Did you not receive the Toshiba Tools & Utilities CD in addition to the Recovery Disks ?
If not then perhaps you could re-install your system from the recovery disks (thereby getting all the correct drivers) and then delete the unwanted software afterwards. This would ensure that you get all the ccompatible drivers for your system
regards,
Similar Messages
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
HT1386 my iphone 3gs will not install updates can anyone help?
My iphone 3Gs has stopped installing updates. it makes no difference whether it is connected to itunes with my usb connection or otherwise. Can anyone help me?
technokid1 wrote:
My iphone 3Gs has stopped installing updates....
Any Error messages or Alerts...
Unplug the iPhone from the computer and Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
How to restore, reinstall to WIN 7 vers. USB 3.0 Host Controller after driver upgrade to Win 8
After an undate for the Intell USB 3.0 Host Controller (extensible) as a WIN 8 driver update my DynaDock does not work properly for any devices using the USB ports on the dock and connected to any USB port on the HP Envy 4-1043 laptop. Reading everywhere I can find anything it seems that there is a problem with the Microsoft or Intel driver for the USB 3.0 Host such that the USBs work find when things are plugged directly into them. BUT, when the dynadock is pluuged in and any of its 6 USB ports are used the devices either cannot be found or behavior extremely sluggishly.
This Dynadock has worked well with my last 4 HP computers and worked fine under WIn 7 and 8 on this Envy until the last update of the driver.
I do not know how to re-install the old driver (Hps' WIN7 version sp56724. Can someone please give me the steps or refer me to a source to do this properly?
There is no roll back option in the device manager for this driver. It is grayed out.
I have take pride in not experimenting with 'brihg tiddeas' of how to fix things on this machine. Not that 99% of my gut plus resources from help pages and Miscrosoft did not work before. I do not have a backup computer anymore and I cannot afford the lost of time and productive in making a mess and then spending days trying to undo and fix something that I know others have done well.Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.
-
Intel(R) USB 3.0 Host Controller Switch Driver
Hello All,
As part of our software install we are installing the Intel(R) USB 3.0 Host Controller Switch Driver (iusb3hcs.sys) on machines that have Win 7 Embedded (x64). When this driver is installed I have noticed that the USB controller behaves differently:
When shutting down (or rebooting), the controller does not completely lose power. Therefore, if I reboot or shutdown from Win7, and immediately boot to a WinPe usb stick, the driver in winpe seems to have an issue loading and the stick is not recognized.
To fix the problem I can simply unplug the machine (allowing for the controller to lose power) and then booting into WinPe the stick is recognized.
Wondering if anyone knows what OS setting or change I can make in the inf to tell the driver to make the USB Controller power down when doing a shutdown. Any help appreciatedHi,
I'd probably start by asking here:
https://social.technet.microsoft.com/Forums/en-us/home?category=windowsembedded&filter=alltypes&sort=lastpostdesc
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing) -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?
Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt -
My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by my hoster, so they should work. Can anyone help me, for these forms are crucial for my business. The forms confirm delivery, but the mails are not recieved. No spam filters enabled.
Meanwhile, I was able to narrow the problem down: PHP seems not to accept a re-directed mail address as sender of the mail in some cases. So, it has nothing to do with the mail form itself.Hi Ingo,
Please refer to this document, Troubleshooting Muse Form Widgets Used on Third-Party Servers
Last section, "I've uploaded my new Muse form, and tried submitting it in the browser, but I never receive an email with the form data. What's wrong?"
- Abhishek Maurya -
I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?
I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy -
can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. what do I do
I have been looking for over a week now and even chatted with the USA but cannot get it to work.
I am really strugglingThanks
someone named Eloisa she gave me a phone no. or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand -
Hi, I´m trying to use the lightning to usb camera adaper, but I get a message that ¨there is too much energy needed to support the device¨, so I can´t download my pictures, can anyone help me?
This discussion may help.
It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards. -
Since receiving a iOS software update (6.1.2) my iPad has frozen and only the iTunes icon and a usb cable show on screen. I am unable to access any App. Can anyone help or point me in the right direction. this was raised with Apple and ticket number advised on 3rd March but not a word from Apple since.
Thank youTry and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Can anyone help me find a list of the ESSENTIAL drivers I need for a Toshiba Satellite A665-S6065?
Long story short: My Toshiba Satellite A665-S6065 won’t boot.
♥ I tried the Microsoft Windows 7 x64 Home Premium Recovery Disk.
♥ I tried the Toshiba Windows 7 x64 Home Premium OEM Recovery Environment
♥ I tried turning off the computer & holding down “0” until it beeps & enters the Recovery Partition.
♥ I tried turning off the computer & F8 to enter the Recovery Partition.
I've tried everything that anyone has told me to do...
So I “acquired” a Windows 7 x64 Home Premium OEM & tried to install from scratch when the message “No drivers found. Please insert/search for drivers to install before proceeding” came up or something close to that.
I need to reinstall Windows 7 x64 Home Premium OEM and the OEM disk I have isn't Toshiba Specific so it is asking for Drivers in order to install. Can anyone help me locate a list of the SPECIFIC DRIVERS I need to just get the OS in?
I've been to the Download Page for Satellite A665-S6065 but there are so many duplicate drivers, I'd be downloading all night!
[admin edit for Terms of Service violation]The system is under warranty.
Send it in for repair. -
I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick. Can anyone help? Thank you
You need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them. But a lot of USB memory sticks need more power than is supplied to the kit, so you may need a powered hub between it and kit.
-
I tried installing os 4.3.3 but ITunes advised of error before completing. I am now left with image on screen of 'usb to be linked with ITunes'. I cannot reboot my IPad or connect with ITunes to re-sync. Can anyone help? Thank you
I have encountered this problem with my first IPAD2 and brought it back to the Apple Store. They gave me a new one and I used it for a few weeks and my MIC was not working so I decided to try and install the update. I hard wired my laptop this time and again I had the same error. The IPAD2 froze so I went back to the Apple Store and they tried to fix the problem. They could not. So they are going to give me another new one. I asked them what the problem could be and they said it was my computer and I should select the download and not the download and install. But to be honest I do not remember I had that option. When I get my new one, I will see if I get the option to select how I update my IPAD. I also saw a message on this site that suggested closing all security programs before attempting to updat the software. I did ask the apple rep when I returned my IPAD today if the security programs would interfer with the update. They said no, but I will try anything to get the update to work. If you find an answer let me know
Maybe you are looking for
-
Will I be able to upgrade my 4S to 5 when IOS 6 is released this fall or should I wait for the new iPhone 5 when released?
-
To convert date dd/mm/yyyy in Timestamp format
hi I want to convert date of format dd/MM/yyyy, which get from user by PropertyUtils.getSimplePropetrty(form, "startDate"); , into Timestamp format........... please help me in this regard....... 1904
-
Deleted adobe edge animate cc and now creative cloud wont letme redownload file just says up to date
deleted adobe edge animate cc and now creative cloud wont letme redownload file just says up to date can anyone tell me how to fix this? do i have to delete files to be able to redownload?
-
"Can't install Server Essentials because you are not connected to the Internet."
I dont understand I am connected to the internet and yet it keeps giving me this message.
-
Hello BW Experts, Is there any transactions / logs where the BW activity can tracked ? Thanks, BWer