Toshiba application disc creator won't open

I cannot get toadc to open in vista64 on my A305-S6894.  All application file appear to be in the folder.When selected run as administrator I get a permission request then a stall. There is no Program shortcut in the Recovery utility folder. Any other way to launch it?
Message Edited by ventricle on 01-29-2009 09:41 AM
Message Edited by ventricle on 01-29-2009 09:41 AM
Message Edited by ventricle on 01-29-2009 09:43 AM

The confusion (sorry) is from Toshiba not me or you! Here is the description from the Help file:A copy of your computers applications and drivers are stored on the hard drive. You can create an application disc by using the TOSHIBA Application Disc Creator.
The other one is a disc burning utility for files. I would like to back up drivers and applications without imaging.
Message Edited by ventricle on 01-29-2009 03:37 PM

Similar Messages

  • Disc drive won't open after update...

    Just noticed my disc drive won't open using the eject key...I can open tray with toast and disc will mount and eject it.. but eject key won't work...have repaired permissions after the updates... one was for bluetooth which I don't have installed..other was security...
    Any suggestions or help would be appreciated..

    What system do you have? From what I read it looks as if you haven't yet installed 10.4.3.
    Try (re-)installing 10.4.3 using the combined upgrade.
    Oops... I just saw you indcated you are running 10.3.7. Any reason you did not upgrade to 10.3.9? My advice to reinstall the combined update to the latest system still holds
    Before that, just to be safe (one never knows) don't forget to backup!
    Message was edited by: Frank STENGEL

  • Cannot start Toshiba Recovery Disc Creator on my Satellite A300-15K

    Hi! I'm from Poland so my English is a little poor.. (but I hope that is sufficient)
    My problem:
    I haven't Recovery disc (DVD) because I don't use earlier Toshiba Recobery Disc Creator (when all in my laptop was good).
    Now I haven't do this disc because when I start Toshiba Recovery disc Creator I have a error:
    " Program Launch RDC and create INI files for RDC Recovery partition _przesta? dzia?a? (ceased to operate)_
    error details:
    Nazwa zdarzenia problemu: APPCRASH
    Nazwa aplikacji: TRORDCLauncher.exe
    Wersja aplikacji: 1.0.0.1
    Sygnatura czasowa aplikacji: 4682674e
    Nazwa modu?u z b??dem: WIMGAPI.DLL
    Wersja modu?u z b??dem: 6.0.6001.18000
    Sygnatura czasowa modu?u z b??dem: 4791a7a6
    Kod wyj?tku: c0000135
    Przesuni?cie wyj?tku: 00009cac
    Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
    Identyfikator ustawie? regionalnych: 1045
    Dodatkowe informacje 1: 9d13
    Dodatkowe informacje 2: 1abee00edb3fc1158f9ad6f44f0f6be8
    Dodatkowe informacje 3: 9d13
    Dodatkowe informacje 4: 1abee00edb3fc1158f9ad6f44f0f6be8
    Przeczytaj nasze zasady zachowania poufno?ci informacji:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0415

    Hi
    Did you change anything on your notebook?
    I mean if your HDD recovery partition has been changed or the data o thin partition has been deleted?
    To be honest for me it looks like the OS issue. I think its not a single tool issue but I think the operating system has been muddled up
    Maybe you should try to recover the notebook using the Toshiba HDD recovery option and after the new OS installation on the notebook you could try to create the recovery disk again.
    In order to start the recovery you have to press the F8 immediately after the notebook has been powered up. Then you should choose the first option called Repair My Computer.
    This would lead to a new window and there you could choose Toshiba HDD recovery.
    But note; this recovery would format the whole HDD so maybe you should backup some data before you would start this procedure.

  • Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

    Hello,
    I am sorry for bad English.
    Satellite A300.
    Conducted updating to Win7 on the program Toshiba Upgrade.
    Does this program work;
    TRDC Reminder and Toshiba Recovery Disc Creator after updating to Wins7?
    The program TRDCReminder did not find "Renewal of computer".
    On the program Toshiba Recovery Disc Creator was created and that incomprehensible?
    If is not it these programm how to recover computer in the case of failure?
    Does Tempro work in Win7?
    Many thanks.
    With kind regards.
    Igor.

    Good evening.As*** - Enormous thank you for an answer.Before updating to W - s7, I created disks reanimator with Vista.Is there a question in that, how to create the disks of reanimator on W - s7? in default of the corresponding programs?I understood that in the case of accident:1.Restore to Vista 2.Repeatedly to set W - S7 ?Really are not there other paths?On Vista the system was reinstalled from a hard disk.There was possibility to create the disk of renewal.W - S 7 AS ? Tempro after a refixturing ?????:To run out term of guarantee, did 6 months pass ? Enormous Thank you for patience. With kind regards. Igor

  • Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not run correctly

    Hi,
    I am trying to create a recovery disc for my Toshiba Satellite L500D PSLK0A-00U009.
    When I run the Recovery Disc Creator it begins to open then it comes up with a box with an exclamation mark then it says 'Can not open target partition'. Then the Recovery Disc Creator will open. It then appears normal then when I insert a CD to being the process it looks as though it is going to work then it says Error and stops and ejects the CD the Error is code is: 0E01B5-26-510444D9
    I have already uninstalled then program then reinstalled it using a download from the MyToshiba website and this did not fix the problem.
    Any suggestions?

    Hi
    Did you try different disks from different manufactures?
    How about the usage of USB flash memory stick? As far as I know you can create an bootable USB Recovery flash stick too.

  • Lightroom won't open, says it's open in another application?Lightroom won't open, says it's open in another application?

    Lightroom won't open, says it's open in another application..

    Depending on your operating system, use Windows Explorer or Finder to open the folder containing your catalog. In that folder you will find a file with the same name as your catalog, but with the .lock extension. That file needs to be deleted, and then you will be able to start Lightroom.

  • Installer/Application Manager just won't open

    In the simplest terms: Adobe Application Manager for CS5 just won't open. It all started when I tried to update CS5 to the most recent version, but this Application Manager would freeze up after the "Initializing Installer" window was done. After that, AAM not only stops responding, but it slows the entire computer down. I would let it sit for 10-20 minutes, and still nothing. I tried downloading the patch to update AAM, but that did the same thing. I tried uninstalling CS5, but that requires AAM, so I used to AppZapper to get rid of all the CS5 programs. When I tried to reinstall, it put AAM back on my computer and the problem returned. I tried the CS5 CleanUp Utility, which claims it got rid of all CS5 files. AAM still locks up after initialization. I tried repairing disk permissions, same thing. I even consulted the PDApp.log, and there have been no FATAL or ERROR messages. I am at a loss here, as I now have no CS5 programs and no way to get them back. Please help.
    I'm running OSX 10.6.5 on a 2x2.8Ghz MacPro with 32 gigs of RAM (which is why its so troubling when the computer slows to a crawl). Thank you in advance for your help.

    If you are using IE 7, try removing it (reverts to IE 6). There seems to be a problem with the windows installer for QT when used with IE 7. This even holds true if you use Firefox or some other browser to download the program. Try using your
    QT icon in your system tray to see if it recognizes QT being on your computer. Mine said it was not loaded even though I could find it in the Windows ADD/Remove utility. This is what I did to correct my problem.
    Remove IE 7
    Remove QT
    Remove iTunes
    Download iTunes + Quicktime
    Install iTunes
    All of my music came back just fine, playlists and all. You may lose some album art or settings such as compilations but that is all.

  • Application and Installer won't open/launch on iMac (Maxon Cinema 4D) help!

    This is a strange one. I have an application that refuses to open.
    I've bought an iMac 24" Intel 3.06Ghz (not the brand new one, but a 2008 model). Everything works fantastically, but I'm having a problem with one particular application - Maxon Cinema 4D (R9.012). I realise this is an older version of Cinema 4D (they are now up to R11), but I have some 3D projects built in the older version that do not convert nicely when opened in the more recent versions. So, on some rare occasions, I need to open the older version to render a particular image successfully, etc.
    But, I am finding that it won't open, and neither will the original VISE installer for the application. I don't believe this is an Intel compatibility problem, as I also have the use of an almost identical iMac 24" Intel 2.4Ghz (identical, obviously apart from the screen size and processor/graphics card) and the version of Cinema 4D R9.012 that won't open on my home computer DOES open fine on this computer. So, I am left bemused.
    When I say that the application won't load, what happens when I double-click is that the dock momentarily expands, as if the app icon is about to appear, but nothing surfaces and the dock immediately goes back to it's normal self.
    I've tried the instructions on this page, to no avail: http://www.macfixit.com/article.php?story=20060314080135452
    I've tried resetting the PRAM, to no avail.
    I'm now lost as to what to try next. I've never encountered an app/installer refusing to open, without seeing some kind of warning or dialogue box.
    Can anyone advise me what this could be caused by, and how to overcome it?
    Thanks for reading!
    Jme

    In case anybody comes across this same problem, a fresh Leopard installatino solved the problem.
    I migrated my iMac to another iMac, installed Leopard afresh, and voila, I was able to install Cinema 4D now! I then migrated my iMac back again, and everything seems to be fine now.
    Very odd.
    Jme

  • Help! Disc drive won't open

    I have a Satellite P75-A7200 that is less than two years old.  My disc drive stopped working for no apparent reason.  I tried pushing into the little hole to the right of the button, but it won't open.  Can someone please help?  Do I need some kind of driver update?  Or is it just a physical problem? Thank you!

    The paperclip or what ever you are putting in the hole to open the drive has to go in far enough to release the drive, mine goes in around 3/4 of an inch you should feel the door release, then it should open.

  • Ps4 disc tray won't open

    Got my ps4 yesterday. I spent all last night setting it up, getting download and what not....now it won't open for a disc. Just makes two beeps when I press the tray button....Please help

    BNASTY_THE_GREAT wrote:
    Got my ps4 yesterday. I spent all last night setting it up, getting download and what not....now it won't open for a disc. Just makes two beeps when I press the tray button....Please helpGotta be trolling? If not, welcome to the forums. The reason you're getting two beeps when pressing eject is because there is no disc in the PS4. There is also no "disc tray", just a slot, you need to insert a disc into said slot, make sure it's a PS4 disc or a Blu Ray though, with the label facing up. There should have been a Quick Start Guide in the box, might be worth reading that.

  • HP Pavilion g7-2270us: The disc tray won't open when I press the button!

    Hi everyone! I've had my laptop for a day or two now, and I love it! Today, though, I wanted to burn a disc, and realized that when I push the button on the disc tray to open it, it won't open.
    It still opens, though; I can go to Computer> Right Click the disc driver> Eject, and the tray opens just fine. Is the button defective?
    I mean, it's not all that bad, and if that's the only problem, I can deal with it. It's not going to get worse, is it? Should I concern myself with replacing it?
    Thank you in advance!
    Also, I apologize if this is in the wrong section...
    This question was solved.
    View Solution.

    Hi,
    It does sound like a mechanical defect with the optical drive release mechanism.  While this may well not cause any other issues, seeing as this is a brand new machine, my best advice would be to simply return the notebook to the retailer it was purchased from and get a replacement.
    Best regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Flash Application for Mac won't open from DVD disc

    I've created a Flash application for a Mac and I have the latest security fix/update for Flash (that was supposed to fix Flash Players and etc.). I've burned the file onto a CD and a DVD. The file plays/opens from the CD but it won't play from the DVD.
    Has anyone run into this before?

    Well I found some sort of solution. I was burning both discs from a PC. I finally burned the DVD from a Mac and now it works!

  • Applications not responding/won't open

    All of a sudden today many applications will not open. They bounce for awhile on the dock, and I have to force them to quit. However, they won't even show up in the force quit menu I have to hold down the control key and click force quit twice. This first began with Skype and now it has affected ichat and gizmo project (another online calling program).
    I am running 10.3.9 which I updated a few weeks ago (so that I could run Skype).
    The only other changes I've made recently are updating itunes and quicktime.
    I'm studying in Italy right now so I'm not sure where to go for help. If anyone has any suggestions I would really appreciate it.
    Thanks!
    iBook G4   Mac OS X (10.3.9)  

    I would use the Accounts System Preferences to create a new user. Log out and log in as the new user. Do the same applications fail to mount for the new user? If so, you have a system-wide problem. If they open for the new user, then your original user has a preference or setting that's causing the trouble. Let us know how this goes and we'll have some more suggestions depending on this troubleshooting step.
    -Doug

  • NB200-10Z: Can't make recovery disk using TOSHIBA Recovery Disc Creator

    Hi Folks,
    I finally got round to buying a USB DVD drive in order to create recovery discs for my NB200-10Z. I got the following:
    * Samsung SE-S084C, External USB 2.0 Slimline 8X DVD Writer, Black
    I have twice tried to create a recovery disc and am now left with two trashed DVDs. The error codes in the error window are:
    Error Code: 0E01B5-26-2A040803
    Error code: 02016F-3C-00000000
    The first time the burning was stopped, the second time the verify failed.
    Can anyone shed light on this?

    *Short version:*
    Thank you to everybody who replied.
    I decided to try out the USB DVD drive on another laptop to perform a HDD backup operation...and it failed as well. Grrrr. Same DVD media (I just hadn't got round to getting new media to try).
    I think I shall discount the possiblility of the NB200 being at fault, and therefore shall consider this question answered on this forum.
    *Long version:*
    Well, I ended up using Virtual CD to "burn" an ISO file to HDD, and then copied that to another laptop to burn to DVD (not using the USB DVD drive, but the same DVD media type). Being the curious type I decided to perform a restore using the USB DVD drive. It got part way through installation then informs me that a CRC check had failed...argggg.
    So, to cut a long story even shorter, I ended up slipstreaming the Intel storage drivers into a Win XP ISO (created from a Win XP CD I had from another previous laptop) and creating a bootable USB drive. Now I have a clean install with all the NB200 driver installed. Phew.
    Actually, to think a bit more about it, I could have attempted to put the Toshiba recovery ISO onto the bootable USB drive, but I've done the clean install now anyway.
    For whatever reason, I had such trouble getting the NB200 BIOS to recognise the USB DVD drive in order to change the boot order (it wasn't in the option list). This was with the DVD in the tray, and without the DVD in the tray. Some investigation required on my part, I think, to determine exactly what is going on.

  • Applications crash or won't open in lion

    All of a sudden I can't get applications like Dropbox, excel for mac and keynote to work on my MacBook pro running lion.  They either don't open or crash immediately and I get a box full of analysis.  Any ideas folks?
    Thank you.

    If you're using Lion, then in a Finder window, hold down the Option key>Go>Library.  The Library window should open.
    Library>Logs>Diagnostic Reports.
    You should find a crash report fro each product you're using.  Just give the most recent one for each program, ignoring Drop Box, because that's their issue, and it's not an Apple Product.  Copy and paste it here.  We should be able to help you.

Maybe you are looking for