Toshiba Camileo H30 importing

I have recently purchased the camileo h30.
I have taken some 1080p video recording.
I have windows vista home premium.
it shows the video fine on the media player.
my issue is when i go to import the video into a
windows movie maker project, the video shows up
as only audio, and there isn't even any sound.
Can anyone help me?

Hello D.Feldman,
have you tried it with the movie maker of the attached software, also?
I think there are no problems with them.
Maybe the Windows movie maker misses some specific codecs?
Another idea is, to record in different resolutions (720p, WVGA, VGA in PAL 50Hz and NTSC 60Hz) and try it again.
regards

Similar Messages

Sony Handycam SX44 and Toshiba CAMILEO H30

Are they compatible with my macbook below are my specs. If not, what are comparable video cameras(under 202.00)?

Well, I personally would avoid both cameras. The SX44 records in mpeg2, a problem for Macs, and the Toshiba in AVI. You can transcode the video using workarounds I have found the best option is to do a lot of research, starting with Amazon.com, where at least one Mac owner of the Toshiba found the files unusable.
I have found that going to Apple and looking for their suggestions often helps. Here is a page with supported camcorders for iMovie 11, for instance. I suspect the list is pretty much the same for your iMovie 09.
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US

Problems importing Mpeg 4 files form a Toshiba Camileo Pro into iMovie

Can anyone advise on what I should do. I have purchased a Toshiba Camileo Pro HD. I can import the clips into iPhoto and play them in Quicktime 7.5.
iMovie recognises the camera and can create and play thumbnails of the clips.
However iMovie does not import the clips, giving an error message. Nether can it 'see' the clips in iPhoto.
Any suggestions would be welcome

After looking through Wikipedia I have found the cause of the problem. to quote
"This is limited however by an undocumented restriction on supported codecs. iPhoto uses the QuickTime library and can create thumbnails for all QuickTime supported formats, but most of these cannot be used by iMovie '08. Indeed, even some of the very few formats that iMovie '08 is able to import will not be recognized when they are added to an iPhoto library."
So it seems that I will not be able to use iMovie after all for my camcorder HD video!
Can anyone suggest an (affordable) application that will do what iMovie does?

Is there anyway I can import video from a Camileo H30 recorder that is not Mac friendly??

Is there anyway I can import video from a Camileo H30 recorder that is not Mac friendly??
Maybe some third party software?

• copy the avi to your local harddrive
• open avi with free Mpeg Streamclip
• convert using 'Export with Quicktime'/AppleIntermediateCodec, or try h.264 to keep the 50p/60p ...

Toshiba Camileo Pro HD/iLife 08/Apple TV

Hello
I need help in figuring this problem out. My camcorder, Toshiba Camileo Pro HD, records footage as an mp4 file in 1280x720p resolution. I import the footage into iLife 08, as the full resolution, not the 940x540p resolution. However, I have tried various export options within iLife 08 to export the edited footage onto Apple TV, but the quality is not what I expected, extreme compression. Can I not export the footage as was recorded, without compressing the footage again, such as a 'passthrough' method?
Thank you for any help offered.

Can I not export the footage as was recorded, without compressing the footage again, such as a 'passthrough' method?
If all you want to do is access your source files, then they are readily available in their associated named_Event folder. If, on the other hand, you are referring to any sort of project output, then no, there is no such things a "pass through" option here since a project is a set of instructions and not physically rendered as a file until it is actually exported/shared.

Camileo H30: I can not open .avi using Pinnacle studio 14

Good day,
I can not open .avi in my Pinnacle studio 14 from my Camileo H30
Where is problem and how is resolution?
Camileo H30, PC with Win7.
Thanks.
regards
/MH/

HI,
I have the same problem trying to imports clips from my new Camileo h30 (set in HD720 30FP).
In my case, it's possible to import the clips, but after scene detection, in the film preview window, the film is displayed with big white horizontal lines,
The video is set in HD 720 as soon as the studio project.
It look like an interlace problem?
Thanks in advance for your help!
Denis

Can I use Toshiba Camileo x200 with AC power supply?

Hello everyone,
I'd like to buy the Toshiba Camileo x200 camcorder, but I have a big issue : its autonomy.
According to my research it can record only 100 min while a 32Gb SD card allows more than 5 hours.
So my question is simple : if i want to use this camcorder in a single place, can I use the AC adapter when i use the camcorder?
Thank you for your help!
Jackal
PS : please excuse my english, i'm french ;)

It is OK. I didnt want to spend a lot of money so I bought H30. I have it almost 2 years now. It is perfect for recording outside but movie quality recording inside is not so good.
To be honest Im thinking about new cam but you know, for good cam we must pay a good price.

Problem recording videos with Toshiba Camileo X-Sports

Hi there,
I recently just brought the Toshiba Camileo X-Sports so am fairly new to how the camera works.
As the title suggests I am having some issues recording.
Right I'll try and explain the best i can
The reason I purchased this device was mainly to be used as a car safety cam (crash cam) as I'm a taxi driver, I drive around 200 miles per day and people's ability to drive sensibly is just getting crazy now and having video evidence if the worst should happen would be amazing. Other reasons was for trips out on my motorcycle and also being able to take this cam under water.
I received the X-Sports on Wednesday, placed the memory card in and hit format card to ensure the card was correctly set for use with the X-Sports
I then read through the manual to see what settings would suit my needs best... I came across looping video.
Here's what the manual says.
Looping Video
Looping Video features recording a continuously looping video that overwrites itself until you stop it.
Looping Video feature includes:
OFF - Default
Max - Depending on the maximum capacity the camera records a certain number of videos based on 15 minutes files, then deletes the first 15 minutes file to continue recording a new video.
5 Min - Camera records 5 x 1 minute file, then deletes the first 1 minute file to continue recording a new video.
20 Min - Camera records 4 x 5 minutes file, then deletes the first 5 minutes file to continue recording a new video.
60 Min - Camera records 4 x 15 minutes file, then deletes the first 15 minutes file to continue recording a new video.
120 Min - Camera records 8 x 15 minutes file, then deletes the first 15 minutes file to continue recording a new video.
So upon reading this I though right as I have a 64gb card (Samsung EVO 64gb Class 10 U1 micro SDXC) I will put the setting on Max and then if ever I needed to recall a video i will have a decent chunk of the day stored on the memory card leading up to the event.
I took the camera out with me on Thursday just for an hour and when i got home i took the memory card out and placed it into my laptop to view the recordings and this is where my problem comes in.
The first 15min video plays back fine but every file after that will not play. when i open the memory card file the first video has the preview style thumb nail where as the rest of the video files do not.
I then searched online and come across this website looking for answers.
some of the info i read was that 1080 60fps was causing some problems with recording and playback and to turn down the fps to 30fps, also that the stability control was also a possibility for these issues.
So last night i went through and made the necessary changes to my settings 1080 @ 30fps and no stability control. I then set the camera up in the living room for 45mins as a test. i then tested the recordings on my laptop and hey presto it worked. 3x 15min videos all playing back as they should Great stuff
This morning at 5am i left for work taking my shiney new cam with me, happy in what i might capture on today's drive and also be satisfied that my camera is functioning as it should.
I get home, stick the memory card into the laptop and I'm back to square one. my first 15mins was fine and all others were unable to playback. I also tried the memory card in my PC and still had the playback issues.
Does anyone have any ideas or shall I return this as faulty?
Sorry for the big post but wanted to put as much info as possible!
Thanks, Leon.

Problem Solved
Camera returned and replaced with a Kitvision Edge HD30W

Toshiba Camileo X100 low sound

I dont know its only my camcoder problem or it have all Toshiba Camileo X100.
I recorded at same time with Nokia and toshiba
This is toshiba video >> [http://www.youtube.com/watch?v=9-y_06P7Rj0]
And here is nokia >> [http://www.youtube.com/watch?v=_fADIb2vywY]
Those videos was recorded at same time from same position.
And toshiba records very silent. I cant hear what people speaks 1 meter from camera.

I have noticed the same on my Toshiba Camileo H20 but generally speaking sound is OK and I can hear everything very well.
Of course it will be much better if the sound could be a little bit louder but it is OK.
Im afraid this is normal and I don't know what can be done about that. You know, there is no setting for mic volume. So I think we must live with it.
Bye

Toshiba Camileo Pro HD camcorder - poor image quality

I have recently purchased a toshiba camileo pro hd camcorder due to its size and being hd 720 quality.
I have connected it through my toshiba wlt tv via the component cable but the quality of the image is poor. it appears very grainy. I thought it was the connection but these have been checked and were perfect.
Im quite unimpressed if this is how it is going to perform even though it was great value.
am i doing something wrong???
Cheers for any advice

Photos and also videos from new Toshiba Camileo Pro HD are unfocused.
In all modes, also Macro/General has no influence.
Outside, inside...
3/5/8Mpx
Everything is possible to switch, but at the end it is unfocused.
Also if photo si done with many items from the camera to the infinity, no item is focused. All are unfocused.
It seems to me like lens not set correctly . Is it possible?
Photos seems like from 1Mxp mobile or worse.
Is it possible to check it somehow if it is the standard quality of lowend device, or if it is some hw problem?
How to set up?

Camileo H30 - How to edit HD videos?

Yes, it's true that video from H30 isn't supported by any editing program like After effect, Pinacle,Sony vegas, Adobe premiere etc...
I want to ask for your ideas, what I can do, when I want to edit my recorded video :(
Somewhere on google I found, that I need some codecs , but finaly it's only for Video, NOT audio.
Thanks for any response :)

Hello
Here in forum there are already some other threads about editing the videos with 3rd party software they were not delivered with the notebook:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=56955
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=57544
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=56484
I think they are useful threads for you :)

Toshiba Camileo S30

I've got one of these HD cameras & am having problems with it.
On occasion when you click the button to end recording the camera crashes, it sits there with the hour glass icon & then doesn't do anything.
After this whatever video you recorded becomes useless as it didn't finish saving correctly.
Is there anyway to fix these damagaed videos? If not I just lost all the recording from my daughters wedding.

I'm sorry for not responding sooner, and I'm very sorry to hear that you're having this problem with such important videos. I'll look into this for you.
You do have the files, but they don't play. Is that correct? How big are the files?
- Peter

How to use the Camileo H30 with Power Supply

Hello
First: excuse my english, im from germany ;)
I have a Camilio H30. its was boughted used. I only got the camcorder & the original battery.
no extras (like usb cable or original power supply)
what i want: i need to film over some hours. The Battery cant make it. so i wanna use it with a power supply but when i put it in (throughh the mini usb a connector) the camcorder goes to charing mode (no actions are possible) but i want to use it fully functionality when power supply is connected.
how do i handle it ??
i got a power supply with 5V an 2,25A , i think its enough... or not??
The Label on the bottum side from the camcorder tells me 5V 2A....
Thanks 4 helping me :D
greetz

oh ok i thought this is possible because in the main manual at the part when the display icons being explaind they show a full, half-full, emtpy- battery and a power connector icon. they call it "gleichstrommodus" sorry i have only the german manual. in english it should be co-corent flow mode or ac power mode.
im looking for a way to make the cam work with power supply only. i dont want to charge or even use the battery because i film over few hours ago and for that i dont need it.
my old dv cam works when the battery was plugged out with ac adapter only. thats very nice for me.
whatever. if this is not possible i sell this cam and buy another one ;)
thanks for your help !

Chopiness in video playback

Hey guys im new to these boards and in need of much advice. I have premiere pro cs5 and am trying to get my music videos done on it,
im a musician and just want to know a pretty good amount of info on video editing and such. Anyways my camera is a cam
corder "Toshiba camileo H30". It does 1080p, or atleast thats what they say. Anyways the videos that
are recorded are in AVI and by the way when i import them, it only imports the sounds. My question is this: Why does the video get
choppy after two cross dissolve transition?? Is it the sequence that is wrong, not powerful enought computer or what?? I am really frustrated when it gets choppy when i hit playback. Please help me resolve this issue
Thanks

Start by answering the question in my first response... just what are you editing?
>powerful enought computer
Well... what IS your computer?
Some reading...
More information needed for someone to help http://forums.adobe.com/thread/416679
Some specific information that is needed...
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Also, For Windows (not sure about Mac) This is aimed at Premiere Pro, but may help for Premiere Elements
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317?tstart=0
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert your files to DV-AVI Type II with 48KHz 16-bit Audio
Xvid/Divx are output files, not meant to be edited (variations of the MPEG4 codec, often used for Internet streaming video) so, they mostly do NOT edit well (if at all) in any flavor of Premiere
To edit a divx file, start at http://www.divx.com/
To edit an xvid file, start at http://www.xvid.com/
To edit WMV http://www.microsoft.com/windowsxp/using/moviemaker/getstarted/default.mspx
and http://www.microsoft.com/expression/products/Encoder4_Overview.aspx
I have NOT used the products below, I only forward due to other mentions
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$90 http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$20 http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
$00 http://www.dvddecrypter.org.uk/ or http://www.mrbass.org/dvdrip/
$00 http://www.squared5.com/ MPEG Streamclip Converter
$00 http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
$00 http://www.virtualdub.org/ Mpeg to AVI Converter
My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built... since the GTX 285 is no longer sold, I would now go with a GTX 460 or whatever is the current "best bang for the buck" - AND I would buy 4Gig-by-3Sticks memory to be able to expand from 12Gig to 24Gig if needed
For my home hobbyist, family movies (which means that I am not trying to recreate Star Wars with video effects or many layers) AVCHD editing is "as smooth as spreading warm butter on hot toast" (also the MP4 video from wife's Flip camera)
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all programs
2 - 320G WD Win7 swap file and video projects
3 - 1T WD all video files... read and write
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for easy video editing
One hard drive is not as good as two which is not as good as three

Unable to mount Camera as external drive

I have three cameras which have not had any problems connecting prior to the latest update to Mountain Lion 10.8.2: Sony NEX-3, Samsung NX100, and a Toshiba Camileo H30.
The NEX-3 is recognized by image capture and iPhoto, the other two are not. I want to mount the camera as an external drive, though it appears that Apple has removed this functionality from Mountain Lion. Is there a workaround for this? Some setting I am missing?
Thanks for your help.

Does your Maxtor allow alternative connecting--firewire or USB. Try the firewire in particular.

Toshiba Camileo H30 importing

Similar Messages

Maybe you are looking for