Toshiba Camileo X100 low sound

I dont know its only my camcoder problem or it have all Toshiba Camileo X100.
I recorded at same time with Nokia and toshiba
This is toshiba video >> [http://www.youtube.com/watch?v=9-y_06P7Rj0]
And here is nokia >> [http://www.youtube.com/watch?v=_fADIb2vywY]
Those videos was recorded at same time from same position.
And toshiba records very silent. I cant hear what people speaks 1 meter from camera.

I have noticed the same on my Toshiba Camileo H20 but generally speaking sound is OK and I can hear everything very well.
Of course it will be much better if the sound could be a little bit louder but it is OK.
Im afraid this is normal and I don't know what can be done about that. You know, there is no setting for mic volume. So I think we must live with it.
Bye

Similar Messages

  • Camileo X100 freezes using remote at the end of clip

    I bought a Toshiba Camileo X100 a few days ago.
    The camera is great, I like it very much.
    However, there is a problem with the firmware I think.
    The remote control is functioning, as expected, although there is no detail about its usage in the manual, I had to guess everything.
    The problem is the following. If you go with the remote to play a clip, you wait for the end of the clip, and would like to go back to the previous screen, you press the Back/Cancel button on the remote (right bottom button).
    If you do this, the camera freezes.
    You have to switch it off and switch it on again to be able to use it.
    The bug was confirmed by HRP Hungary (distributor and service in Hungary), we tested it together over the phone, so it should not be the problem of my specific camera.
    What could you advise me on this?
    The following issues are not bugs, but during playback it would be useful to be able to see somehow the details of the clips recorded (at least the time of the recording), and to be able to set some settings for recording, so that the camera does not forget everything at turning off (e.g. stabilization, or pre rec setting etc.).
    Why do you have to have the screen open, when you are shooting a time lapse for a few hours, or during playback on TV?
    THX for any help.

    Hi there,
    THX for checking. I also sent a letter to Toshiba, first they wanted to replace the camera, then I explained again that the replacement will work the same way, no answer since then.
    What I ment during playback, is some information about the clips, e.g. the time, when the recording was made. Currently you only see the number of the file and the total number of files in the list, and the length + the number of the files when you are on one file. On other cameras you see the length, the time of the recording, the settings used. On Camileo X100, you see only the length and the basic setting, but no data on the time of the recording, or other metadata (e.g. stabilization focus...). It is not a bug, but would have been useful.

  • Camileo X100 - Can it receive input through the connection ports?

    I want to be able to record whats on my tv using the camcorder or possibly connect the camcorder to some other device and record what the device is sending to the camcorder (possibly using the playback function). The camileo x100 has a TV jack, HDMI, and USB port.
    http://cgi.ebay.com/Toshiba-Camileo-X100-PA3790U-1CAM-HD-Camcorder-/350472802216?pt=Camcorders_Professional_Video_Came ras&hash=item5199ce8fa8

    Hi buddy,
    No, thats not possible. All ports on Camileo X100 are only *output* ports to view recorded videos on TV or computer.
    There is no input port on the camera.

  • Can Camileo X100 be used as a webcam?

    I just got a Toshiba Camileo X100 for my birthday and I wish to know if I can use this camera as a webcam?
    On this review it says that Camileo X100 can be used as a webcam: http://www.pcadvisor.co.uk/reviews/photo-video/3220546/toshiba-camileo-x100-review/ but I don't know how to do that. Any help would be appreciated.
    If this feature is available for this camera, what webcam software is the best? And when I try to use Camera Assistant Software while my camera is connected to my pc by a Mini USB cable, I get this error message:
    "Webcam is either disabled or has failed. Please check your webcam settings".

    The camera can't be used as a webcam. Found it on one of the FAQ pages.

  • Camileo X100 1 video but uploads 2 why

    Why when i upload a video from my camileo x100 to my PC i get the same video twice,im recording in the highest res and when on pc is only 30 fps not 60 ? any help on either of these questions would be greatly appreciated

    Hey,
    The same or similar question was already asked here:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=56484&tstart=0
    Im not X100 owner but I have Camileo H30 that is the previous model I think and it generates AVI movie files and I can use these files with every program. Sound and picture work properly, even the camera software is not installed.
    I dont know this Vegas Video 8 program but normally every program can handle avi files. Check also the manufacture page of this video program for an update.
    I hope it helps! :)
    Greets

  • Re: Camileo X100 - cannot edit the files

    I bought the Camileo X100 and have been frustrated ever since i got it.
    I cannot edit the files with anything, Adobe premiere CS5 sees them as only Audio, Sony Vegas Studio HD 9.0 only see them as video with no audio.
    I've tried to convert them but, it converts with no sound and poor picture quality or with no video and just sound. VirtualDub gives me an error when i try to convert with it aswell. Quicktime still can't play them even after instaling the Divx package.
    It seems counter productive to make a camera that has codecs that are this hard to edit.
    I ran Gspot and it says H.264/Mpeg-4 AVC supposedly this is standard but, but the issue i think is that it's container is AVI.
    So my question is, should i return this camera? or is there a way to edit on Vegas or Premiere?

    I figured it out on my own. What you need to do is Download Windows Movie Maker 11. Import 1 file at a time and set whatever resolution you want (preferably the same resolution you brought it in as) But make sure when you're saving your video set the bitrate at 10000. So for example my video is 1920x1080, so my export is 1920x1080 at 10,000 bit rate and 30 FPS. With these setting there is absolutely NO loss of video quality. This will work with your S10 too. And the files become editable in Premiere CS5 and Sony Vegas. Have fun!

  • Satellite M300: Low sound microphone levels and crackle sound using Skype

    Brand new machine, and tried to use Skype.
    Low sound levels and a crackle through it.
    Tried it in sound recorder, and low sound, but no crackle.
    Can not get the sound levels up.
    Driver for Conexant HD SmartAudio 221 shows as up to date (4.36.7.0)
    Any assistance would be appreciated.

    Do you use Toshiba factory settings? YES
    Which OS do you use? VISTA
    Do you have the same problem using headset? NO
    I have narrowed it down a little more. It is only when I am connected to my wireless network. I can have Wi-Fi enabled, and connected to the internet via a mobile internet connection and there are no issues.
    When I am connected via the router, I have this issue. You could say it is the router, however I have various other machines connected to the same router, without issue.
    So, to clarify.
    WiFi on - not connected to internet via router, however connect by other means - All ok
    WiFi on - connected to the internet via router, issue.
    Router is Thomson SpeedTouch 570

  • Low Sound Vloume & webcam

    I've recently bought a Toshiba laptop (Satelite L500-13) which does not have satisfactory sound volume, sound is extremely low...and other thing is the picture quality of the webcam is worst that made me disappointed!
    Please advise how to solve these.
    Thanks!

    Here's one suggested fix that works for many who experience the low sound issues on laptops which use the Realtek HD Audio drivers. These directions are for Windows 7, other operating systems may require a slightly different set of steps. 
    First, Download and install the latest Realtek HD Audio drivers from the Realtek website. If the ".exe" or executable file version of the Realtek HD audio driver is downloaded, this file may need to be run twice (run installer, reboot computer, run the installer a second time, then reboot the computer a second time) to properly install the audio driver.
    Second, once the audio drivers have been updated, enable "Loudness Equalization" on either the Start --> Control Panel --> Hardware and Sound --> Realtek HD Audio Manager --> Sound Effects tab, then click OK to save the setting change. Or on the Start --> Control Panel --> Hardware and Sound --> Sound --> Speaker Properties (select Speakers then the Properties button) --> Enhancements tab, scroll down the list of sound effects to enable "Loudness Equalization" then select the OK button to save the setting changes.
    Once the Realtek drivers have been updated and the "Loudness Equalization" has been enabled the system sound audio level is much louder, however the DVD and Audio CD audio levels might continue to be low for some users. Some find that setting the Equalizer, found under the Realtek HD Audio Manager Sound Effects tab or on the Speaker Enhancement tab, to "Powerful" seems to help with the sound levels.
    As to the web camera video quality, these integrated web cameras will NOT give video camera quality video. And it appears that these integrated cameras are in the 1 MegaPixel range which also affects the video image quality. If the Toshiba Web Camera Application version is installed check the Settings page and experiment with the Profile setting to improve the video quality as well as the settings on the Advanced tab, also reducing the size of the video display window from 640x480 to a smaller video window size like 320x240 might also improve the video quality. And the amount of light in the room might also affect the image quality.

  • I can't take my warranty for Camileo X100

    The serial number of my Camileo X100 doesn't exist in the toshiba warranty database.
    I call to support center and i got no response.
    I'm getting disappointed with toshiba.
    What's the other way to put me in contact with toshiba?

    Hi mate
    >The serial number of my Camileo X100 doesn't exist in the toshiba warranty database
    I have no idea what database you have used but possibly you tried to register the Camileo camcorder in notebook database. This will not function
    I think your Camileo is covered by standard warranty and if something will go wrong with your camcorder you could get in contact with your dealer or with the Toshiba ASP (Toshiba authorized service partner) in your country.
    Greets

  • Very low sound volume on Portege R500

    The sound volume on my R500 (R500-11c to be exact) is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Decreasing the sound volume slider from 100 does make the almost inaudible sound even harder to even notice, and at around 45 it is no longer audible even in a quiet room with headphones.
    So it seems that I somehow need to reset the audio chip to "normal" level. Or it is broken and can't output anything more audible.
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Hello, and thanks for answering.
    Yes, I have tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    A hardware problem... well maybe, I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

  • Low sound p505d-s8930

    after upgrading to 7 i now have low sound have spent over 4 hrs with toshiba tech installing,uninstalling drivers over and over with no resoultion thinking of going back to vista. i would appreciate any help thanks

    it must be bothering you if you want to go back to vista. does that happen to have realtek audio? if so go to control panel and look for realtek hd audio manager. then under the sound effects tab check the box next to loudness eq.this should help. if you dont have realtek let us know which one you have.
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

    Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

    Hi saiyed adil, 
    Thank you for contributing to the Apple Support Communities. 
    It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it. 
    It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    All the best,
    Jeremy 

  • I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Problem recording videos with Toshiba Camileo X-Sports

    Hi there,
    I recently just brought the Toshiba Camileo X-Sports so am fairly new to how the camera works.
    As the title suggests I am having some issues recording.
    Right I'll try and explain the best i can
    The reason I purchased this device was mainly to be used as a car safety cam (crash cam) as I'm a taxi driver, I drive around 200 miles per day and people's ability to drive sensibly is just getting crazy now and having video evidence if the worst should happen would be amazing. Other reasons was for trips out on my motorcycle and also being able to take this cam under water.
    I received the X-Sports on Wednesday, placed the memory card in and hit format card to ensure the card was correctly set for use with the X-Sports
    I then read through the manual to see what settings would suit my needs best... I came across looping video.
    Here's what the manual says.
    Looping Video
    Looping Video features recording a continuously looping video that overwrites itself until you stop it.
    Looping Video feature includes:
    OFF - Default
    Max - Depending on the maximum capacity the camera records a certain number of videos based on 15 minutes files, then deletes the first 15 minutes file to continue recording a new video.
    5 Min - Camera records 5 x 1 minute file, then deletes the first 1 minute file to continue recording a new video.
    20 Min - Camera records 4 x 5 minutes file, then deletes the first 5 minutes file to continue recording a new video.
    60 Min - Camera records 4 x 15 minutes file, then deletes the first 15 minutes file to continue recording a new video.
    120 Min - Camera records 8 x 15 minutes file, then deletes the first 15 minutes file to continue recording a new video.
    So upon reading this I though right as I have a 64gb card (Samsung EVO 64gb Class 10 U1 micro SDXC) I will put the setting on Max and then if ever I needed to recall a video i will have a decent chunk of the day stored on the memory card leading up to the event.
    I took the camera out with me on Thursday just for an hour and when i got home i took the memory card out and placed it into my laptop to view the recordings and this is where my problem comes in.
    The first 15min video plays back fine but every file after that will not play. when i open the memory card file the first video has the preview style thumb nail where as the rest of the video files do not.
    I then searched online and come across this website looking for answers.
    some of the info i read was that 1080 60fps was causing some problems with recording and playback and to turn down the fps to 30fps, also that the stability control was also a possibility for these issues.
    So last night i went through and made the necessary changes to my settings 1080 @ 30fps and no stability control. I then set the camera up in the living room for 45mins as a test. i then tested the recordings on my laptop and hey presto it worked. 3x 15min videos all playing back as they should Great stuff
    This morning at 5am i left for work taking my shiney new cam with me, happy in what i might capture on today's drive and also be satisfied that my camera is functioning as it should.
    I get home, stick the memory card into the laptop and I'm back to square one. my first 15mins was fine and all others were unable to playback. I also tried the memory card in my PC and still had the playback issues.
    Does anyone have any ideas or shall I return this as faulty?
    Sorry for the big post but wanted to put as much info as possible!
    Thanks, Leon.

    Problem Solved
    Camera returned and replaced with a Kitvision Edge HD30W

  • Iphone 4s really low sound

    Hello,
    From some months I experience the problem with the sound of the iPhone 4s. The sound is really low. You can only hear it if you put your ear very near to the speakers. I've tried everything. Settings -> Sounds to max. Restarting the iPhone. Once I've played Flappy Bird, the sound like fixed itself for 2-3seconds. From low sound it turned very loud but for 2-3 seconds. Then I've tried Restoring the iPhone to its factory settings - nothing again. I lost and my Flappy Bird...
    So my Question is - can we fix the sound problem and return my flappy bird? I can't download it from the gamecenter.

    vikAy,
    Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.
    All my best,
    Allen

Maybe you are looking for