Toshiba Canvio Basic 500GB suddendly stopped working

Toshiba CANVIO BASIC V63700-A 500GB
I have it loaded (full) since 2012 and used it may times.
Now it suddenly stopped showing up on my PC, sometimes message showing saying ' device not recognised'
about 2 months ago I purchased new PC with windows 8 (earlier it was 7).
All other older an newer External Storage devices working fine
I also have 593400-A 500GB 08/11 that work fine.
so also DTP110 1TB 07/13 and DTP110 1TB 07/14, plus 3 more from other make also working fine.
Thanks for your help and advice

Every HDD is a “wear part”.
What does this mean? Well, sooner or later every HDD will die… and in most cases such issues appear suddenly and are surprising.
Such HDD is an simple plug’n play device…this means that you have to connect it to USB port and it should work…
If its not the case, the device could malfunctions and usually this isn’t fixable.

Similar Messages

Toshiba notebook registration reminder has stopped working

Hi
everytime I open my laptop it shows "Toshiba notebook registration reminder has stopped working"
How can I fix that?

Hello
Do you need the registration reminder? I dont think so if you have already registered your notebook
Easiest way is you disable the program from start up Navigate to start > run > msconfig and select start up tab. Then search for registration reminder and uncheck the box.
Afte restarting the computer it shouldnt appear anymore. Can you confirm this?

Ext.HDD Toshiba Canvio Basics. What HDD is used inside?

Hi!
ext.HDD Toshiba Canvio Basics. What Hard Disks used inside?

I guess it’s a common 2.5” SATA HDD.

Toshiba Canvio Basics 3.0 Sleep mode (HDTB110XK3BA)

I'm mad about this, my toshiba keeps entering in suspension and i dont know what to do. I've tried changing the wire from a 3.0 for a 2.0 and doesnt work. Try the toshiba sleep removal tool and doesnt detect my HD. Any way to help this poor soul?
-Daniel.
Reformated to fat32 but keeps sleeping :/

Lots of ideas in this thread, Daniel.
Canvio sleep function
-Jerry

Toshiba Canvio Basics 3.0 causes network broken

I use my extenal hdd(usb 3.0) to macbook(MacBook5,2,OS X 10.8.1 (12B19)).
During copying files, the network is broken.
I use other hdd(usb 2.0), but there is no same situation.
Does anyone have same situation?
How can I submit this problem to Apple by email?
Thansk.

That's too bad. >_<
I have look up online support page. It recommends to go to Apple store, but I don't think it's work.
I just stop copy action and monitor network by ping.
When I copy file, ping is timeout. When I stop it, ping is normal.
Strangely, it's noraml sometimes after reboot.
I think it may be caused by some driver issue.
Thanks.

My Ipod Touch suddendly stopped working, I tried to plug it in in different devices but anything is working, I does not charge and neither turn on. what should i do?

I'm not being able to use my iPod, Its not working at all! need help.

Take it to apple for diagnostics.

Toshiba L55-A5226 Touchpad Randomly Stopped Working

I used a external mouse before this happened so I noticed it probably a week after it occurred. I tried going into the synaptics driver but it no longer showed up in the mouse menu. I have uninstalled and reinstalled the latest touchpad drivers (more than 10 times) but whenever I open mouse properties after a fresh install it says Unable to connect to the synpatics pointing driver and asks me to uninstall it or not. The touchpad does not show up in device manager either only HID compliant mouse shows up. I have also tried FN + F5 (the f key with the mouse symbol on it) and it has not worked either. I have also downloaded the newest motherboard driver to no avail. I'm starting to think the ribbon connecting the touchpad to the motherboard has loosened or whatever but I hope not. Also the latest driver for my laptop is from mid 2013, I recall seeing one from 2015 but I can't seem to find it again, if someone can I would appreciate it greatly. *Update: I refreshed the computer without affecting files in hopes of it automatically downloading but that didn't workout either. PART NO. PSKLAU-01200E

Sorry I think I posted this in the wrong place. I reposted in the keyboard and touchpad section of the forums.

"The Toshiba Firmware Linkage Driver has stopped working properly" - Windows 8.1

How to solve the problem for
Laptop Toshiba Satellite L 300
thanks & best regards

Which Satellite L300? There is a label on the bottom.
-Jerry

Canvio Basics 500GB - error message F:\ is not accessible

I have just bought this ext drive and have been happily transferring photos, suddenly this message appears:
'F:\ is not accessible. The file or directory is corrupted and unreadable'
What does this mean? Is it dead already?

Originally Posted by Jeffrey
I assume the F:// means the connected external HDD.
Are you able to access any data stored on the HDD?
Are you able to create a folder on the HDD?
Please check this!
Please also start the command prompt console (CMD) and type this:
f:
press enter
dir
press enter
Now you should get a list of data stored on the HDD.
Does it work?
Thanks so much for your help Jeffrey, I have just used the error check on the ext hard drive and that seems to have fixed it, but I will note your fix in case of future problems.

DFS replication stopped working and cannot be debugged because WMI repository cannot be accessed

Hello,
two days ago our DFS replication suddendly stopped working sometime around midnight local time. At least this is what our second domain controller is reporting. Event log is flooded with event id 5002 from DFSR. It is unclear what caused this sudden problem
and even worse, how to solve it. First thing I tried was to perform propagation tests. According to propagation report none of them was successful. Creating an integrity report brought me to another problem: It fails with two errors. First it is unable to
connect to the other DC. Second it is unable to access local WMI repository. This is true for both machines.
First I tried to find information on possible problems with WMI. WMIdiag provided a lot of information. However, opinions I found on the net largely disagree whether output from WMIdiag is useful or not. Yet I tried to re-compile .mof files and rebuild the
repository. So far, nothing changed. This is my output from WMIdiag:
34309 13:02:46 (0) ** WMIDiag v2.1 started on Donnerstag, 22. Mai 2014 at 12:49.
34310 13:02:46 (0) **
34311 13:02:46 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
34312 13:02:46 (0) **
34313 13:02:46 (0) ** This script is not supported under any Microsoft standard support program or service.
34314 13:02:46 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
34315 13:02:46 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
34316 13:02:46 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
34317 13:02:46 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
34318 13:02:46 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
34319 13:02:46 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
34320 13:02:46 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
34321 13:02:46 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
34322 13:02:46 (0) ** of the possibility of such damages.
34323 13:02:46 (0) **
34324 13:02:46 (0) **
34325 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34326 13:02:46 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
34327 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34328 13:02:46 (0) **
34329 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34330 13:02:46 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'COM\ABCDEF' on computer 'DC2'.
34331 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34332 13:02:46 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
34333 13:02:46 (0) ** INFO: => 1 possible incorrect shutdown(s) detected on:
34334 13:02:46 (0) ** - Shutdown on 01 April 2014 10:20:54 (GMT-0).
34335 13:02:46 (0) **
34336 13:02:46 (0) ** System drive: ....................................................................................................... C: (Datenträgernr. 0 Partitionsnr. 1).
34337 13:02:46 (0) ** Drive type: ......................................................................................................... SCSI (Adaptec Array SCSI Disk Device).
34338 13:02:46 (0) ** There are no missing WMI system files: .............................................................................. OK.
34339 13:02:46 (0) ** There are no missing WMI repository files: .......................................................................... OK.
34340 13:02:46 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
34341 13:02:46 (0) ** AFTER running WMIDiag:
34342 13:02:46 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
34343 13:02:46 (0) ** - Disk free space on 'C:': .......................................................................................... 10665 MB.
34344 13:02:46 (0) ** - INDEX.BTR, 4276224 bytes, 22.05.2014 12:52:30
34345 13:02:46 (0) ** - MAPPING1.MAP, 67248 bytes, 22.05.2014 12:52:30
34346 13:02:46 (0) ** - MAPPING2.MAP, 67168 bytes, 22.05.2014 12:48:33
34347 13:02:46 (0) ** - OBJECTS.DATA, 23126016 bytes, 22.05.2014 12:52:30
34348 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34349 13:02:46 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
34350 13:02:46 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
34351 13:02:46 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
34352 13:02:46 (0) ** => This will prevent any WMI remote connectivity to this computer except
34353 13:02:46 (0) ** if the following three inbound rules are ENABLED and non-BLOCKING:
34354 13:02:46 (0) ** - 'Windows Management Instrumentation (DCOM-In)'
34355 13:02:46 (0) ** - 'Windows Management Instrumentation (WMI-In)'
34356 13:02:46 (0) ** - 'Windows Management Instrumentation (ASync-In)'
34357 13:02:46 (0) ** Verify the reported status for each of these three inbound rules below.
34358 13:02:46 (0) **
34359 13:02:46 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' group rule: ............................................. DISABLED.
34360 13:02:46 (0) ** => This will prevent any WMI remote connectivity to/from this machine.
34361 13:02:46 (0) ** - You can adjust the configuration by executing the following command:
34362 13:02:46 (0) ** i.e. 'NETSH.EXE ADVFIREWALL FIREWALL SET RULE GROUP="Windows Management Instrumentation (WMI)" NEW ENABLE=YES'
34363 13:02:46 (0) ** Note: With this command all inbound and outbound WMI rules are activated at once!
34364 13:02:46 (0) ** You can also enable each individual rule instead of activating the group rule.
34365 13:02:46 (0) **
34366 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34367 13:02:46 (0) ** DCOM Status: ........................................................................................................ OK.
34368 13:02:46 (0) ** WMI registry setup: ................................................................................................. OK.
34369 13:02:46 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
34370 13:02:46 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
34371 13:02:46 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
34372 13:02:46 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
34373 13:02:46 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
34374 13:02:46 (0) ** this can prevent the service/application to work as expected.
34375 13:02:46 (0) **
34376 13:02:46 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
34377 13:02:46 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
34378 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34379 13:02:46 (0) ** WMI service DCOM setup: ............................................................................................. OK.
34380 13:02:46 (0) ** WMI components DCOM registrations: .................................................................................. OK.
34381 13:02:46 (0) ** WMI ProgID registrations: ........................................................................................... OK.
34382 13:02:46 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
34383 13:02:46 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
34384 13:02:46 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
34385 13:02:46 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 1 WARNING(S)!
34386 13:02:46 (0) ** - ROOT/MICROSOFTACTIVEDIRECTORY, ReplProv1, replprov.dll
34387 13:02:46 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
34388 13:02:46 (0) ** This can be due to:
34389 13:02:46 (0) ** - the de-installation of the software.
34390 13:02:46 (0) ** - the deletion of some files.
34391 13:02:46 (0) ** => If the software has been de-installed intentionally, then this information must be
34392 13:02:46 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
34393 13:02:46 (0) ** the provider registration data.
34394 13:02:46 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\MICROSOFTACTIVEDIRECTORY path __Win32Provider Where Name='ReplProv1' DELETE'
34395 13:02:46 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
34396 13:02:46 (0) ** You can retrieve the missing file from:
34397 13:02:46 (0) ** - A backup.
34398 13:02:46 (0) ** - The Windows CD.
34399 13:02:46 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
34400 13:02:46 (0) ** - The original CD or software package installing this WMI provider.
34401 13:02:46 (0) **
34402 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34403 13:02:46 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
34404 13:02:46 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
34405 13:02:46 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
34406 13:02:46 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
34407 13:02:46 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
34408 13:02:46 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
34409 13:02:46 (0) **
34410 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34411 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\ANONYMOUS LOGON' has been REMOVED!
34412 13:02:46 (0) ** - REMOVED ACE:
34413 13:02:46 (0) ** ACEType: &h0
34414 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34415 13:02:46 (0) ** ACEFlags: &h0
34416 13:02:46 (0) ** ACEMask: &h7
34417 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34418 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34419 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34420 13:02:46 (0) **
34421 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34422 13:02:46 (0) ** Removing default security will cause some operations to fail!
34423 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34424 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34425 13:02:46 (0) **
34426 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34427 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34428 13:02:46 (0) ** - REMOVED ACE:
34429 13:02:46 (0) ** ACEType: &h0
34430 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34431 13:02:46 (0) ** ACEFlags: &h0
34432 13:02:46 (0) ** ACEMask: &h7
34433 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34434 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34435 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34436 13:02:46 (0) **
34437 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34438 13:02:46 (0) ** Removing default security will cause some operations to fail!
34439 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34440 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34441 13:02:46 (0) **
34442 13:02:46 (0) ** DCOM security for 'My Computer' (Access Permissions/Edit Limits): ................................................... MODIFIED.
34443 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34444 13:02:46 (0) ** - REMOVED ACE:
34445 13:02:46 (0) ** ACEType: &h0
34446 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34447 13:02:46 (0) ** ACEFlags: &h0
34448 13:02:46 (0) ** ACEMask: &h7
34449 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34450 13:02:46 (0) ** DCOM_RIGHT_ACCESS_LOCAL
34451 13:02:46 (0) ** DCOM_RIGHT_ACCESS_REMOTE
34452 13:02:46 (0) **
34453 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34454 13:02:46 (0) ** Removing default security will cause some operations to fail!
34455 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34456 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34457 13:02:46 (0) **
34458 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34459 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34460 13:02:46 (0) ** - REMOVED ACE:
34461 13:02:46 (0) ** ACEType: &h0
34462 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34463 13:02:46 (0) ** ACEFlags: &h0
34464 13:02:46 (0) ** ACEMask: &h1F
34465 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34466 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34467 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34468 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34469 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34470 13:02:46 (0) **
34471 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34472 13:02:46 (0) ** Removing default security will cause some operations to fail!
34473 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34474 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34475 13:02:46 (0) **
34476 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34477 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34478 13:02:46 (0) ** - REMOVED ACE:
34479 13:02:46 (0) ** ACEType: &h0
34480 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34481 13:02:46 (0) ** ACEFlags: &h0
34482 13:02:46 (0) ** ACEMask: &h1F
34483 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34484 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34485 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34486 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34487 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34488 13:02:46 (0) **
34489 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34490 13:02:46 (0) ** Removing default security will cause some operations to fail!
34491 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34492 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34493 13:02:46 (0) **
34494 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Default): ..................................... MODIFIED.
34495 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34496 13:02:46 (0) ** - REMOVED ACE:
34497 13:02:46 (0) ** ACEType: &h0
34498 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34499 13:02:46 (0) ** ACEFlags: &h0
34500 13:02:46 (0) ** ACEMask: &h1F
34501 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34502 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34503 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34504 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34505 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34506 13:02:46 (0) **
34507 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34508 13:02:46 (0) ** Removing default security will cause some operations to fail!
34509 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34510 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34511 13:02:46 (0) **
34512 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34513 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34514 13:02:46 (0) ** - REMOVED ACE:
34515 13:02:46 (0) ** ACEType: &h0
34516 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34517 13:02:46 (0) ** ACEFlags: &h0
34518 13:02:46 (0) ** ACEMask: &h1F
34519 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34520 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34521 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34522 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34523 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34524 13:02:46 (0) **
34525 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34526 13:02:46 (0) ** Removing default security will cause some operations to fail!
34527 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34528 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34529 13:02:46 (0) **
34530 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34531 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\PERFORMANCE LOG USERS' has been REMOVED!
34532 13:02:46 (0) ** - REMOVED ACE:
34533 13:02:46 (0) ** ACEType: &h0
34534 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34535 13:02:46 (0) ** ACEFlags: &h0
34536 13:02:46 (0) ** ACEMask: &h1F
34537 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34538 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34539 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34540 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34541 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34542 13:02:46 (0) **
34543 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34544 13:02:46 (0) ** Removing default security will cause some operations to fail!
34545 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34546 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34547 13:02:46 (0) **
34548 13:02:46 (0) ** DCOM security for 'My Computer' (Launch & Activation Permissions/Edit Limits): ...................................... MODIFIED.
34549 13:02:46 (1) !! ERROR: Default trustee 'EVERYONE' has been REMOVED!
34550 13:02:46 (0) ** - REMOVED ACE:
34551 13:02:46 (0) ** ACEType: &h0
34552 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34553 13:02:46 (0) ** ACEFlags: &h0
34554 13:02:46 (0) ** ACEMask: &hB
34555 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34556 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34557 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34558 13:02:46 (0) **
34559 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34560 13:02:46 (0) ** Removing default security will cause some operations to fail!
34561 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34562 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34563 13:02:46 (0) **
34564 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34565 13:02:46 (1) !! ERROR: Default trustee 'BUILTIN\ADMINISTRATORS' has been REMOVED!
34566 13:02:46 (0) ** - REMOVED ACE:
34567 13:02:46 (0) ** ACEType: &h0
34568 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34569 13:02:46 (0) ** ACEFlags: &h0
34570 13:02:46 (0) ** ACEMask: &h1F
34571 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34572 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34573 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34574 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34575 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34576 13:02:46 (0) **
34577 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34578 13:02:46 (0) ** Removing default security will cause some operations to fail!
34579 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34580 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34581 13:02:46 (0) **
34582 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34583 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\INTERACTIVE' has been REMOVED!
34584 13:02:46 (0) ** - REMOVED ACE:
34585 13:02:46 (0) ** ACEType: &h0
34586 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34587 13:02:46 (0) ** ACEFlags: &h0
34588 13:02:46 (0) ** ACEMask: &h1F
34589 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34590 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34591 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34592 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34593 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34594 13:02:46 (0) **
34595 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34596 13:02:46 (0) ** Removing default security will cause some operations to fail!
34597 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34598 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34599 13:02:46 (0) **
34600 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34601 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\SYSTEM' has been REMOVED!
34602 13:02:46 (0) ** - REMOVED ACE:
34603 13:02:46 (0) ** ACEType: &h0
34604 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34605 13:02:46 (0) ** ACEFlags: &h0
34606 13:02:46 (0) ** ACEMask: &h1F
34607 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34608 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34609 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34610 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34611 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34612 13:02:46 (0) **
34613 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34614 13:02:46 (0) ** Removing default security will cause some operations to fail!
34615 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34616 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34617 13:02:46 (0) **
34618 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34619 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\NETWORK SERVICE' has been REMOVED!
34620 13:02:46 (0) ** - REMOVED ACE:
34621 13:02:46 (0) ** ACEType: &h0
34622 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34623 13:02:46 (0) ** ACEFlags: &h0
34624 13:02:46 (0) ** ACEMask: &h1F
34625 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34626 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34627 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34628 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34629 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34630 13:02:46 (0) **
34631 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34632 13:02:46 (0) ** Removing default security will cause some operations to fail!
34633 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34634 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34635 13:02:46 (0) **
34636 13:02:46 (0) ** DCOM security for 'Microsoft WMI Provider Subsystem Host' (Launch & Activation Permissions): ........................ MODIFIED.
34637 13:02:46 (1) !! ERROR: Default trustee 'NT AUTHORITY\LOCAL SERVICE' has been REMOVED!
34638 13:02:46 (0) ** - REMOVED ACE:
34639 13:02:46 (0) ** ACEType: &h0
34640 13:02:46 (0) ** ACCESS_ALLOWED_ACE_TYPE
34641 13:02:46 (0) ** ACEFlags: &h0
34642 13:02:46 (0) ** ACEMask: &h1F
34643 13:02:46 (0) ** DCOM_RIGHT_EXECUTE
34644 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_LOCAL
34645 13:02:46 (0) ** DCOM_RIGHT_LAUNCH_REMOTE
34646 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_LOCAL
34647 13:02:46 (0) ** DCOM_RIGHT_ACTIVATE_REMOTE
34648 13:02:46 (0) **
34649 13:02:46 (0) ** => The REMOVED ACE was part of the DEFAULT setup for the trustee.
34650 13:02:46 (0) ** Removing default security will cause some operations to fail!
34651 13:02:46 (0) ** It is possible to fix this issue by editing the security descriptor and adding the ACE.
34652 13:02:46 (0) ** For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
34653 13:02:46 (0) **
34654 13:02:46 (0) **
34655 13:02:46 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
34656 13:02:46 (0) ** DCOM security error(s) detected: .................................................................................... 14.
34657 13:02:46 (0) ** WMI security warning(s) detected: ................................................................................... 0.
34658 13:02:46 (0) ** WMI security error(s) detected: ..................................................................................... 0.
34659 13:02:46 (0) **
34660 13:02:46 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
34661 13:02:46 (0) ** Overall WMI security status: ........................................................................................ OK.
34662 13:02:46 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
34663 13:02:46 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 1.
34664 13:02:46 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
34665 13:02:46 (0) ** 'select * from MSFT_SCMEventLogEvent'
34666 13:02:46 (0) **
34667 13:02:46 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
34668 13:02:46 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
34669 13:02:46 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
34670 13:02:46 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
34671 13:02:46 (0) ** - ROOT/SERVICEMODEL.
34672 13:02:46 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
34673 13:02:46 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
34674 13:02:46 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
34675 13:02:46 (0) ** i.e. 'WMIC.EXE /NODE:"ISWDC2" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
34676 13:02:46 (0) **
34677 13:02:46 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
34678 13:02:46 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
34679 13:02:46 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 32 ERROR(S)!
34680 13:02:46 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34681 13:02:46 (0) ** MOF Registration: ''
34682 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34683 13:02:46 (0) ** MOF Registration: ''
34684 13:02:46 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34685 13:02:46 (0) ** MOF Registration: ''
34686 13:02:46 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34687 13:02:46 (0) ** MOF Registration: ''
34688 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34689 13:02:46 (0) ** MOF Registration: ''
34690 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34691 13:02:46 (0) ** MOF Registration: ''
34692 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34693 13:02:46 (0) ** MOF Registration: ''
34694 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34695 13:02:46 (0) ** MOF Registration: ''
34696 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34697 13:02:46 (0) ** MOF Registration: ''
34698 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34699 13:02:46 (0) ** MOF Registration: ''
34700 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34701 13:02:46 (0) ** MOF Registration: ''
34702 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34703 13:02:46 (0) ** MOF Registration: ''
34704 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34705 13:02:46 (0) ** MOF Registration: ''
34706 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34707 13:02:46 (0) ** MOF Registration: ''
34708 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34709 13:02:46 (0) ** MOF Registration: ''
34710 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34711 13:02:46 (0) ** MOF Registration: ''
34712 13:02:46 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34713 13:02:46 (0) ** MOF Registration: ''
34714 13:02:46 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34715 13:02:46 (0) ** MOF Registration: ''
34716 13:02:46 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34717 13:02:46 (0) ** MOF Registration: ''
34718 13:02:46 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34719 13:02:46 (0) ** MOF Registration: ''
34720 13:02:46 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34721 13:02:46 (0) ** MOF Registration: ''
34722 13:02:46 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34723 13:02:46 (0) ** MOF Registration: ''
34724 13:02:46 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34725 13:02:46 (0) ** MOF Registration: ''
34726 13:02:46 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34727 13:02:46 (0) ** MOF Registration: ''
34728 13:02:46 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34729 13:02:46 (0) ** MOF Registration: ''
34730 13:02:46 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34731 13:02:46 (0) ** MOF Registration: ''
34732 13:02:46 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34733 13:02:46 (0) ** MOF Registration: ''
34734 13:02:46 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34735 13:02:46 (0) ** MOF Registration: ''
34736 13:02:46 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34737 13:02:46 (0) ** MOF Registration: ''
34738 13:02:46 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34739 13:02:46 (0) ** MOF Registration: ''
34740 13:02:46 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34741 13:02:46 (0) ** MOF Registration: ''
34742 13:02:46 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
34743 13:02:46 (0) ** MOF Registration: ''
34744 13:02:46 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
34745 13:02:46 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
34746 13:02:46 (0) ** You can refresh the WMI class provider buffer with the following command:
34747 13:02:46 (0) **
34748 13:02:46 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
34749 13:02:46 (0) **
34750 13:02:46 (0) ** WMI MOF representations: ............................................................................................ OK.
34751 13:02:46 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
34752 13:02:46 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
34753 13:02:46 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
34754 13:02:46 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
34755 13:02:46 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34756 13:02:46 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34757 13:02:46 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
34758 13:02:46 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34759 13:02:46 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
34760 13:02:46 (0) **
34761 13:02:46 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
34762 13:02:46 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
34763 13:02:46 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
34764 13:02:46 (0) ** WMI static instances retrieved: ..................................................................................... 1822.
34765 13:02:46 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
34766 13:02:46 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
34767 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34768 13:02:46 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
34769 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34770 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34771 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34772 13:02:46 (0) **
34773 13:02:46 (0) ** # of additional Event Log events AFTER WMIDiag execution:
34774 13:02:46 (0) ** DCOM: ............................................................................................................. 0.
34775 13:02:46 (0) ** WINMGMT: .......................................................................................................... 0.
34776 13:02:46 (0) ** WMIADAPTER: ....................................................................................................... 0.
34777 13:02:46 (0) **
34778 13:02:46 (0) ** 32 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
34779 13:02:46 (0) ** => This error is typically a WMI error. This WMI error is due to:
34780 13:02:46 (0) ** - a missing WMI class definition or object.
34781 13:02:46 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
34782 13:02:46 (0) ** You can correct the missing class definitions by:
34783 13:02:46 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
34784 13:02:46 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
34785 13:02:46 (0) ** (This list can be built on a similar and working WMI Windows installation)
34786 13:02:46 (0) ** The following command line must be used:
34787 13:02:46 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
34788 13:02:46 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
34789 13:02:46 (0) ** with WMI by starting the ADAP process.
34790 13:02:46 (0) ** - a WMI repository corruption.
34791 13:02:46 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
34792 13:02:46 (0) ** to validate the WMI repository operations.
34793 13:02:46 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
34794 13:02:46 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
34795 13:02:46 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
34796 13:02:46 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
34797 13:02:46 (0) ** the WMI repository must be reconstructed.
34798 13:02:46 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
34799 13:02:46 (0) ** otherwise some applications may fail after the reconstruction.
34800 13:02:46 (0) ** This can be achieved with the following command:
34801 13:02:46 (0) ** i.e. 'WMIDiag ShowMOFErrors'
34802 13:02:46 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
34803 13:02:46 (0) ** ALL fixes previously mentioned.
34804 13:02:46 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
34805 13:02:46 (0) **
34806 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34807 13:02:46 (0) ** WMI Registry key setup: ............................................................................................. OK.
34808 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34809 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34810 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34811 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34812 13:02:46 (0) **
34813 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34814 13:02:46 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
34815 13:02:46 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
34816 13:02:46 (0) **
34817 13:02:46 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\ABCDEF\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_ISWDC2_2014.05.22_12.49.13.LOG' for details.
34818 13:02:46 (0) **
34819 13:02:46 (0) ** WMIDiag v2.1 ended on Donnerstag, 22. Mai 2014 at 13:02 (W:89 E:52 S:1).
There are a lot of error in the report and I don't know, whether they are relevant or how to solve them. To my current knowledge, I need to solve at least some of them so that I can access the local WMI repository again and get replication back working.
But after hours of research I am stuck. Any hints are greatly appreciated.
Regards,
Oliver

I don't know why, but soon after posting this, I found a solution to the problem. The WMI part was solved in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
The relevant portion is this:
Open a CMD prompt in %windir%\system32\wbem
mofcomp dfsrprovs.mof
net stop winmgmt
net start winmgmt
net start iphlpsvc
net stop dfsr
net start dfsr
I don't know why recompiling of all mof did not solve the problem, but the solution above did. Restarting the DCs solved the communication issue. I don't know why the primary DC forgot about the WMI DFS provider or why communication failed. However, it is
working again, it seems.

Adobe photoshop elements 11 stopped working.

Photoshop elements 11 suddendly stopped working. I have worked with the program the last couples of years and never had a issue until now.
I have not change any settings in my computer. Windows 7 (64).
I have read in other forums, it may be caused by a windows update or antivirus. What do I need to do to have my software work again? I would really appreciate if you can help me resolving this issue.

I have exactly the same problem. After useing Adobe Photoshop Elements 10 for more than a year, I get the same error message after I chose the edit option. I have not used the program in a few weeks, so I cannot guess what other program was updated that might have affected the performace of Photoshop. But, Photoshop does work in Safe Mode. So, there is something that suddendly is in conflict. Unfortunately for me, the first things I tried were to remove and reinstall Photoshop a few times. Now my restore system option of Win7 is not available for a date far enough in history to get Photoshop to work again. I have removed all software that used to open at Startup. I have tried to open Photoshop as an administrator and also with various compatibility settings to now avail. I have checked the installation logs and there are no errors.
Seeing that the prevous forum post is from February 2014, I am assuming that no one viewing this forum is going to help me with this problem either, but I can try to remain optimistic. I'm out of other options for getting help. I'm not excited by the idea of reinstalling all my software again and the hours of my time that will take, especially when I don't even know that this will help.

Will my rMBP read a Toshiba Canvio Ext. Hard drive?

I'm planning on getting a Toshiba Canvio Basics 1.5 TB External USB 3.0 Portable Hard Drive,
http://www.bestbuy.com/site/Toshiba+-+Canvio+Basics+1.5TB+External+USB+3.0+Porta ble+Hard+Drive+-+Black/5622222.p?id=1218677495232&skuId=5622222
but I don't know if my computer can mount this without the thunderbolt stuff and all that.
Will I have to buy some kind of USB thunderbolt connector thing?
Thanks..

A Toshiba computer? If so,..
1. Which computer? There is a label on the bottom.
2. Which backup application?
3. Attach a picture of the error message.
-Jerry

YouTube app has stopped working

TV: Toshiba 40RL838
YouTube app has stopped working, hangs on start logo.
Toshiba Places works ok. ..looking for a solution

Yes! Absolutely the same problem! Region RU, I see well-known logo and nothing more! First I noticed this two or three days ago. Did youtube change some specific url hardcoded in my tV ?

Laptop L755-S5217 speaker stops working

The internal speaker of my Toshiba Satellite, L755-S5217 recently stops working frequently while I am watching Yu Tube or a downloaded video. It starts working again when I click the tab in the sound setting screen like "Playback or Recording". Also it works again when I connect a headphone or a external speaker jack and disconnect them. I reinstalled the latest sound drivers. I also updated Windows. But they didn't help at all.

Do you change any of the sound settings or does simply opening the screen fix the speaker?
- Peter

I tunes has stopped working in windows 7 and I don't know how to get the crash information that everyone else seems to get to know what the cause is....any help? I have a toshiba windows 7 computer.

I have a toshiba computer and it is windows 7, recently after I installed imatch everytime I open itunes I get the message 'i tunes has stopped working' and windows cannot find a solution and has to close. There is no solution and I don't know how to get the crash information on my computer....can anyone help as I want to finish downloading all my songs to match to be available on my mac products.

Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

Toshiba Canvio Basic 500GB suddendly stopped working

Similar Messages

Maybe you are looking for