Toshiba Diagnostic Tools for testing new machines

I ordered a Toshiba Satellite T135-S1312*. From Microsoft Store. Since I have 14 days, I want to do run some extensive testing on the hardware and software just to make sure that everything is fine and that nothing is defective. I can do a lot of manual work, but instead, I'm sure there's some diagnostic and automated tools to help speed this up with precision. I'm wondering if you can supply any from microsoft or....if you can point the ones from somewhere else such as the manufacturer so that I can have it do extensive tests on battery life processor speed memory video card performance simulating disc burns all the ports on the laptop and so forth. please let me know as soon as possible. thanks

Blah blah blah - stinkin' unsolicited advertisers!

Similar Messages

CrystalReportsTier error in Diagnostic Tool for BO XI 3.0 Edge

We recently installed XI 3.0 Edge. We are having a problem with not being able to create parameters for Crystal reports any longer in Business View Manager (we create and save them, but when we come back in and try to view them, BVM crashes). When I run the Diagnostic Tool, in the Crystal Reports Tier section, I get a message that says "Failed to add tables to test report from XML source.", and it fails the test. I am not sure if the two are related.
Has anyone run into a similar problem in the Crystal environment ?

We discovered that, although we couldn't "Save As" Crystal reports with dynamic parameters, the push method, we could pull the reports up to the documents folder by using the Central Management Console (CMC). Under the Manage menu, there is an Add menu item that allows Crystal reports to be pulled up. When we did this, suddenly hidden parameter components would appear in the Business View Manager screen - they must have been created by the failed attempts to push the reports up, though they were invisible until the pull was done. After deleting all duplicated components, and re-promoting, we could get the reports to function in InfoView.
So I don't know what was causing the diagnostics to flare up, and although it is apparent Edge 3.0 has some issues, there was a way to finally get the reports loaded along with their dynamic parameters.

Directed here to find a cooling performance diagnostic tool for my X205.

Hi,
I was looking for software to monitor and control the fans in my X205. I have an overheating problem when gaming. The vents are clear, and I have opened the case and cleaned it out. The vents are not blocked. This problem occurred recently. I assumed it was a problem with XP getting corrupted, so I re-installed XP Pro. This did not help. The fan itself works, as I ran it on 5 volts when I opened the case. No problems. It justy won't come on when the GPU gets hot (75 Celcius).
A notebook forum referrred me to this site, and said I should search for a utility called "Cooling Performance Diagnostic Tool", but I can't find anything.
Does anyone know where I can download this utility? I need to monitor and control these fans. I have re-installed the Toshiba system utilities and drivers from the Toshiba site, but the fan does not appear to be controlled.
Anyone got any opinions on this one?
Cheers,
Rob

As far as I know such tool does not exist.
Maybe someone told you to check settings in Toshiba power saver settings for option Cooling method.
Anyway, I presume you have US notebook model so I must redirect you again. ;)
Check Toshiba US support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp and pick up info about all available tools and utilities.
You can also visit forum there and discuss with people who have US notebook models.
On this page we discuss in most cases about European models and Europe support.

Diagnostic tool for 11i

Hi Hussein,
Is Diagnostic tool installed by default on 11i too ? Just like in R12?
How do I install it?
Thanks a lot

Hi hussein,
I am stuck with this caution/attention of the patch:
1. Copy the following text files from 3636980 to the admin directory under
   APPL_TOP.
        izuprod.txt
        izuterr.txt
        newprods.txt
   Review newprods.txt and verify that the tablespaces listed exist
   and are the ones planned for use by this product.
   If changes are required, edit the file as appropriate and save it.
   For tablespaces sizing suggestions please see the FAQ "What should be the
   tablespace sizes used for the new IZU product?" in Metalink Note 235307.1
newprods.txt
%%% Splicer control file format 11.5.A
# $Header: newprods.txt 115.2 2005/09/12 06:34:13 mcasalgr noship $
# Section for Oracle Support Diagnostic Tools
product=izu
base_product_top=*APPL_TOP*
oracle_schema=izu
sizing_factor=100
main_tspace=USER_DATA
index_tspace=USER_IDX
temp_tspace=TEMP
default_tspace=USER_DATA
# end of Oracle Support Diagnostic ToolsI dont have the above tablespace , I presume I have to create them right? but i can not see the
tablesapace sizing required in Metalink Note 235307.1
Can you help me the sizing please.
Thanks

Startup problems--time for a new machine?

I have an imac G5 that I bought last February. In the last few weeks I've been experiencing serious startup problems. When turned on, the screen goes gray and the lines and pixels fragment and shimmer. It takes a long time to go to the main screen and often the screen isn't stable and freezes. It takes me eight to ten startups to get the system stable.
I've repaired disk permissions, repaired h-drive, reset Pram. Still a mess. My husband wants me to just get a new one and get something that is not an Apple this time. I'm resisting that.
I don't want to lose all my data and I've backed up what I can but I'm worried the data is corrupted and if I load it on to a new machine, I will experience the same problems.
Any advice? I'm not even sure if this is a hardware or software problem. I'm out of warranty so I am on my own, but I'm frustrated to be having these problems with such a new machine.
Thanks for any advice,
Cassandra
iMac G5 Mac OS X (10.4.6)

Cassandra, in addition to Barbara's excellent suggestion: looking to see if you qualify for the program, please make sure that you have an external FireWire drive and clone your drive, (SuperDuper is an excellent choice for backing up, cloning and making scehduled backups).
Let us know how you made out,
Miriam
Rev A 20" iMac G5, 15"iMac G4, 15"iMac G3 DVD Mac OS X (10.4.6)

The tool for testing developed system

We have already developed a system base on WebAS.Is there some test tool for the developed system such as J Unit in Java?Thanks.

If your intentions is to test user interfaces or scenarios eCatt is the best choice. If you want to ensure code quality ABAP Unit and Code Inspector are suited well.
http://help.sap.com/saphelp_nw04s/helpdata/en/10/6d1c370c468b7be10000009b38f936/frameset.htm
Best Regards
Klaus

Is it possible to disable Wi-Fi 2.4 GHz and only use 5 GHz for testing new wireless installations? (Lion, MBP Mid 2010)

Hi,
I already read that it was not possible to switch off either 2.4ghz or 5ghz radio in the year 2009. Is it in the meantime possible? I would like to test some new wireless installations on Co-channel interference.

AHT on the disks is unreliable and can't be updated to match firmware and drivers changes in OS X updates, so don't even bother with it.
If your Mac is a more recent model, you can boot the machine while holding the D key down until something appears on the screen, but you have to be near your Wifi or on Ethernet connection to the router/modem as AHT is downloaded from Apple's servers.
If your machine is having a problem, take it to a Apple Authroized Repair or Store and they will hook it up to their diagnostic machine for free.
No problem.
And you can install as many OS X versions on one machine as you like, as long as it's a Mac.
OS X 10.5 is obsolete and insecure, OS X 10.6 and later are getting security updates.
OS X 10.6 has Rosetta and will run your PPC based programs of 10.5.
OS X 10.7 and later version will not run Rosetta or PPC code, unless you install OS X 10.6 Server (it's legal) into a virtual machine program.
Download the free MacTracker and it can tell you everything about your particular model of Mac and what operating systems it will run.

Diagnostic tools for MacBook Pro?

Hello!
I recently bought a refurbished 3rd party MacBook Pro. I am a little skeptical about buying it be because it was refurbished. Is there any type of software that can go through a process of diagnosing the internal parts to make sure that they are tip-top shape? I tried to load Apple's software, but it states that my computer is not supported. Any help?
MacBook Pro 15-inch mid-2010
Thanks!

Your place that sold you the Mac should have included the pre bundled installer discs. Call AppleCare for a replacement set if they didn't. It is only a nominal fee. Included is the hardware test that boots with the 'D' key and the ability to erase and install the original operating system at the time which was some version of 10.6, which also supported pre-2006 PowerPC applications such as Appleworks. If you have no need of such Apps, sticking with 10.9.4 is fine.
Some things that may slow you down:
http://discussions.apple.com/docs/DOC-6921
Do not attempt to install any optimization tools. They will likely slow you down.

Will you ever give us developers some decent tools for testing in Internet Explorer?

Today I got a bug report for one of our websites, and its a bug that only affects IE10, no other browsers.
My office has just upgraded to Windows 8. To then realise that IE11 is installed and you do not allow us to install IE10. What good is that? Seriously.
I know you have that compatibility mode, but that really doesn't work as well as you think it does. Not for styling issues anyway. Please please please help developers out and give us tools so we can actually test things in different versions
of browsers. Let us install different versions of browsers without them affecting each other. Just something so we as developers can actually make a product that works in all your versions of IE.

Hi 1bellb,
Welcome to Visual Studio general question forum. You know that
VS General Question forum mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor. Based on your post, I feel your issue is more related to Internet Explorer browsers. In order to resolve your issue better, I recommend you post your
issue on Internet Explorer forum: Internet Explorer
8, 9, 10, 11 forum for better support.
Thank you for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is the best diagnostic tool for Mac 10.7

Having lots of weird problems....such as mail opens when I start an app,, have to reboot to open Mac, windows show on screen with desktop, etc. Have verified disc & repaired permissions. Shows all is ok... Installed Norton for Mac, no viruses.
What is the best diagnostic program that can find what is going on?

Norton Antivirus (made by Symantec) has a very long and illustrious reputation for mangling Mac OS X systems, sometimes to the point where a complete reinstall is necessary. Among other things, it installs kernel extensions which are known to cause kernel panics and system freezes; it contains known and documented bugs which can silently corrupt Adobe Photoshop and Adobe InDesign files, destroy a user's ability to authenticate as an administrator, and (on PPC systems) can cause Classic to stop functioning; and Symantec has on at least two occasions now released flawed .dat file updates which erroneously report certain critical Mac OS X files as "viruses." (Deleting these "viruses" causes damage to the system that in some cases renders it unbootable.)
Norton Removal Tool (Symantec Uninstaller):
http://www.symantec.com/business/support/index?page=content&id=TECH103489&locale =en_US
And now this, from 11 January 2012:
Lawsuit Claims Symantec "Scareware" Warns Of Fake Threats To Sell Upgrades
http://www.forbes.com/sites/andygreenberg/2012/01/11/lawsuit-claims-symantec-sca reware-warns-of-fake-threats-to-sell-upgrades/

[ot] A UML tool for a new Java project

I am working on the new Java project and need a UML tool to get it start. I am wondering whether anyone one can recommend such tool or not. It can be either stand alone or as an Eclipse plug-in. It shall be able to handle at least 50 classes.
Thanks.

Is it any good? I haven't tried it but we're
evaluating UML tools here and it's on my list to play
with.
PS.If you mean SDE....
I have only used the personal edition at home, and the other versions have more functionality available
My impressions, FWIW, are
- easier to use than rational rose (I find this one which I have to use at work to be a pain), although, paradoxically enough, they are not that dissimilar in appearance
- I was able to create some reasonably complex models without any problems
- easy to install and start using - no great learning curve
- I tried importing a model I had exported from rose and that did not work very well at all.
- this applies to version 2.2

Accessibilty tools for testing

Are there any tools to Flash application for accessibility and Section 508 compliance?
thx

Hey.
Here's an article on accessibility on Flash CS4
http://www.adobe.com/accessibility/products/flash/author.html

Where can I download required tools for testing Crystal Reports?

Hello!
I would like to trial your reports. So, I downloaded them from the following link:
Thank You | SAP
The SAP Crystal Reports Installation Guide told me that I should install SAP GUI and Business Explorer tools.
Where can I download these tools?
I found the following links which seems to give me what I need:
SAP GUI 7.30 Download
Complete Installation SAP GUI 740 and BEx Frontend - SAP NetWeaver Business Warehouse - SCN Wiki
But I cannot download the required tools.
Even though I am successfully registered and logged on your web site, it asked me to enter my credentials. And after I do so, it keeps asking me to do so. I record a video showing this:
2015-04-08_1857 - ZhannaSelishcheva's library
Would you please let me know how can I evaluate your Crystal reports and provide links for required tools?

Hi Jane
What exactly are you trying to do? Why SAP GUI? Do you have an Enterprise product / access to SMP?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Slooooow file opening (for a new machine) - why?

I've recently upgraded my OS to Win7 & I'm running a quad core 2.8Ghz on an Intel SSD drive, 8GB RAM, 64-bit system, 1GB Graphics RAM, 5GB available RAM in photoshop.
Problem is, when opening a batch of small 4x6's (300dpi), I'm seeing major hesitation between files (eg to open 8 jpg @ 1800x1200, it takes 6 seconds).
This has me a little worried, as I commonly process batches of 50+ jpegs.
I've disabled automatic creation of snapshots, updated Photoshop & I'm running the latest Graphics driver.
The only thing I've noticed is that Open GL drawing gets disabled when I open more than 28 4x6's, and that my graphics card (EVGA 01G-P3-N964-LR GeForce 9600 GSO 1GB) is labelled in photoshop as a GeForce 9600 GSO 512 (I guess that's OK though as it's probably just an umbrella name for the drivers that work the card--the card is listed correctly in Control Panel in the GeForce controller)
Any suggestions where to start looking for a fix?
Thanks

Are you using an external hard drive? Then this may help, it helped me. I was experiencing the same problem opening files as well as saving files - it was extremely slow. Open up 'Control Panel', then 'Device Manager', right-click on your external hard drive (under the 'Disk drives') and select 'Properties', then click on the 'Policies' tab. Select 'Better performance'. This made a huge difference in the opening and saving times of all my files.
Good luck!

Need information on open source testing tools for ADF web applications

Hi experts,
I need to investigate on new feasible open source Java testing tools for testing ADF web applications. I have tried to google a lot but getting confused.
My requirements as as under:
1. The tool must be open source.
2. It should be easy to understand and to work upon by the tester and developers.
Selenium based testing approach is already in place for testing the application but need to search for tools other than Selenium which shall prove suitable for testing ADF applications. Kindly let me know your inputs / suggestions.
Thanks a lot in advance.
Neelanand

Hi,
Have a look at JMeter http://jakarta.apache.org/jmeter/index.html
1. The tool must be open source.It is.
2. It should be easy to understand and to work upon by the tester and developers.I guess it is.
There are some specifics in configuring it for ADF, but Chris Muir wrote a nice blog about how it's done, check it out http://one-size-doesnt-fit-all.blogspot.com/2010/04/configuring-apache-jmeter-specifically.html
Pedja

Toshiba Diagnostic Tools for testing new machines

Similar Messages

Maybe you are looking for