Toshiba Display Utility is incorrect driver 3-9-2015

Toshiba Display Utility is actually ALPS pointing device driver update dated it was released by toshiba 3-9-2015

You're proper it's today. After i lamented regarding it toshiba technical assist they have to have swapped out this report while using accurate 1 or perhaps will you be one which set this report in existence initially?
NoorAlamShahzad

Similar Messages

Sat A200-1AE: Toshiba Hardware Utility - "the serial number is invalid"

Dear Sirs,
I install Vista Business to my A200-1AE (originaly it was Home Primium). I install all drivers exept TOSHIBA Hardware Setup Utility . Then i try to install it is says "the serial number is invalid"
Can some one help how to install it and what can be a problem?

What I did - I walk thru the original drivers that were added on the cd with Home Vista.
I found out that Toshiba Hardware Utility version is 1.48.0.8c, it is not the same as it is on a download drivers presented by toshiba for downloading v.1.48.0.9c.
1.48.0.9c - this is the version wich didnt want to be instaled -"Serial number is incorrect". So i found it in the net and install 1.48.0.8c
Plus it was mentioned that all drivers from the beginning have to be installed in order - given by toshiba, but by number 8 it was mentioned *TI Multiple Digital Media card Reader* - only after Jeffrey msg i found out that it is the same ->Flash Media Driver - the one i was installing right after Flash card Support utility - since i coudnt figure out what they mean by T*I Multiple Digital Media card Reader*.
I tryed it on my girlfriend notebook and it worked.
Right now I will try it on my Notebook - after usefull help by you Jimi regarding incorrect ROM size i will try it and let you knoiw if it worked.
I just dont understand why it is important to install drivers in the strick order + different versions appears.
One more thing, I have a problem with Robson Package - it is all the time against me -no instalation :-( but it is appears with the rest of drivers presented by toshiba for my model.

WARNING: Toshiba Maintenance Utility

Be careful of the Toshiba Maintenance Utility.
Its sole purpose is to delete all the partitions on your hard drive!
You'll find it on the Troubleshoot screen in the Windows Recovery Environment.
-Jerry

Nice video! That's your voice?
I have a shortcut to that recovery environment (the Options menu).
shutdown /r /o t 0
BTW, you can arrange to include desktop apps in Refresh.
How to create a system image to refresh your Windows 8 PC
But I understand that it does not restore settings (like even email accounts in Outlook).
-Jerry

HP On-Screen Display Utility for HP Envy 14 Beats LTD.

I had my hard drive replaced because the stock HDD stopped working abruptly. A fresh install of windows left me with a number of missing drivers an utilities. I found most from software and drivers hp support page for my notebook but there's one problem I could not find the solution for.
I gather that I need the HP On-Screen Support Utility for my notebook because pressing the brightness and audio buttons no longer brings up the on-screen slider. Additionally, the Beats logo doesn't show up with the FN+B function.
Product name: HP Envy14 Notebook PC (Beats Limited Edition)
Product number: XB110AAR
Windows 7 Home Premium 64-bit Service Pack 1
This question was solved.
View Solution.

SOLVED:
A little more research and I found that the On-Screen Display Utility (OSD) is actually part of HP MediaSmart. It can be downloaded from the following HP thread:
HP Mediasmart Software package for Windows 7
Hope this helps other users!

Locked out due to Toshiba Password Utility

Last night I was browsing my laptop before bed and I came across the Toshiba Password Utility. I opened the utility, entered credentials, clicked next. It asked me to enter more credentials, clicked next, finished (as far as I remember). This morning I woke and turned on my laptop. A screen with a back background, keyboard, and text boss with the text "Enter Password" launches before arriving at the Windows login screen. I don't know what happened because when I enter the password I used last night, I get the message "Validation Error!!" I must have "fat fingered" the credentials, which seems odd to me as you have to enter them twice for the program to accept them. I don't know what to do. I have been trying for hours and hours and hours to guess the password. I called Toshiba technical support very early this morning and the guy said he could not help me. I bought the laptop in July of this year. I called the paid technical support and left a message, but have not heard back. I have no idea what to do? Help!!

Is there anyone out there who can help me with this? I've spent hours on the phone with Toshiba technical support and the guys don't know anything but very basic stuff. I've tried calling the Toshiba "paid" technical support and they never return my phone calls. I've taken it to a computer repair shop and they did not know how to fix it. I've taken it to Best Buy to return it, but they said it would take 3-4weeks for it to go back to Toshiba and get me laptop back. I've taken apart the laptop, tried power cycling, hitting the JCMOS, JEPM, and JPW jumpers. I've tried booting from a flash drive, it can't. I can't even enter the BIOS setup. I don't know what to do. I just have a big paperweight! Please someone help if you can!

How to access "Display Utility"?

edit: one second after posting I saw this: Note:
*1: The Display Utility supports W701 and W701ds.
On the hotkey features integration packages (http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-74261(
it says:"Display Utility
This program provides a function to change various settings of the ThinkPad's internal display. This program is applicable only to several featurized ThinkPad products. The settings of "Color Temperature", "Color Space", "Dynamic Contrast" and "Over Drive" are available. "
But I can't find it anywhere. How do I access it?

hey thecrafter,
could you provide to me the MTM of your unit ?
To locate MTM - http://support.lenovo.com/en_US/FindProductNumber.page#find
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.

Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.
This is a problem that suddenly appeared.

Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

After SN install can't launch Disk Utility from external drive

I recently upgraded 10.5.9 to SN on my white Macbook. First I used Carbon Copy Cloner to clone the old drive onto the replacement drive in an external enclosure. Then I swapped drives so that the new drive is now the internal drive and the old drive is in the enclosure. I then upgraded the OS on the internal drive via SN installer on DVD.
Now when I start from the external drive in OS X 10.5.9 and try to launch Disk Utility from this drive I get a weird error message that "Disk Utility can't be launched because it's incompatible with this architecture." The only things I can think of is that Snow Leopard installs something that globally effects all perhipherals (like new disk drivers?), or that there is something in the enclosure's USB bridge which is causing this, or that installing Snow Leopard breaks the PRAM for older versions of OS X. Tech support for the enclosure vendor tells me there is nothing in the enclosure's USB that would cause this. Any insights into what's happening appreciated.

Thanks for response. Ah, that's it. I was trying to launch it from the applications folder I had dragged to the dock, which was done while running Snow Leopard. That's why (duh!) all the application icons were slashed out. : |

"Display ATI Radeon Family driver stopped responding and has recovered"

For the past few days my laptop Model HP G61-409CA has been displaying broken black and white horizontal lines and black, white, and coloured random squares on my screen. When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. Unfortunetly when i click on the triangle nothing opens up.
Ive tried to download Catalyst Control Centre because when I researched many people spoke about not being able to find their control centre and that it had something to do with the displaying error on the screen. I cant seem to find the folder or the program on my computer, but when i tried to install something similar from http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages less than half way through the computer displayed a Blue screen and had to shut down. Also when i recovered my laptop the problem did not go away.
My product number : WA964UA#ABC
OS: Windows 7 for x64 based systems
Please let me know what needs to be done ive tried updating all my drivers aswell!

Hi Quesspee,
Thank you for your query, I am happy to assist you!
I grasp that a few days ago your display started showing broken black and white horizontal lines and black, white, and coloured random squares on your screen . When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. When you clicked on the triangle, nothing happened.
You tried installing the Catalyst Control Center and approximately 1/2 through, you received a blue screen and your system shut down.
You tried doing a recovery but the issue remained.
I suggest you test for hardware failures. Testing for Hardware Failures (Windows 7)
If this did not help to locate the issue, I suggest contacting HP support for further assistance. They have the ability to remotely log onto your system, to help locate and resolve issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Media browser in Premiere CS 6 doesn't display list of hard drives!

My media browser in Premiere CS 6 doesn't display list of hard drives. There is no dropdown of folders or anything to select the media from. Any suggestions as to why this is happening and how I can correct this?

If Premiere is acting weird try this:
Start Premiere with holding down shift+alt until welcome screen.
See if that will help.

[Bug Report] CR4E V2: Exported PDF displays Japanese characters incorrectly

We now plan to transport a legacy application from VB to Java with Crystal Reports for Eclipse. It is required to export report as PDF file, but result PDFs display Japanese characters incorrectly for field with some mostly used Japanese fonts (MS Gothic & Mincho).
Here is our sample Crystal Reports project: [download related resources here|http://sites.google.com/site/cr4eexportpdf/example-of-cr4e-export-pdf]
1. PDFExportSample.rpt located under ..\src contains fields with different Japanese fonts.
2. Run SampleViewerFrameClient#main(..) to open a Java Report Viewer:
    a) At zoom rate 100%, everything is ok.
    b) Change zoom rate to 200% or 50%, some fields in Japanese font collapse.
    c) Export to PDF file,
         * Fonts "MS Gothic & Mincho": both ASCII & Japanese characters failed.
         * Fonts "Meiryo & HGKyokashotai": everything works well.
         * Open PDF properties, you will see all fonts are embedded with built-in encoding.
         * Interest to note that copy collapsed Japanese characters from Acrobat Reader, then
           paste them into a Notepad window, Notepad will show the correct Japanese characters anyway.
           It seems PDF export in CR4E mistaking to choose right typeface for Japanese characters
           from some TTF file.
3. Open PDFExportSample.rpt in Crystal Report 2008 Designer (trial version), and export it as PDF.
    The result PDF displays both ASCII & Japanese characters without any problem.
Test environment as below:
* Windows XP Professional SP3 (Japanese) with MS Office which including extra fonts (i.e. HGKyokashotai)
* Font version: MS Gothic, Mincho, Meiryo, all in Version 5.0
    You can download MS Meiryo from Microsoft's Site:
    http://www.microsoft.com/downloads/details.aspx?familyid=F7D758D2-46FF-4C55-92F2-69AE834AC928&displaylang=en)
* Eclipse 3.5.2
* Crystal Reports for Eclipse, V2, 12.2.207.r916
Can this problem be fixed? If yes how long will it take to release a patch?
We really looking forward to a solution before abandoning CR4E.
Thanks for any reply.

I have created a [simple PDF file|http://sites.google.com/site/cr4eexportpdf/inside-the-pdf/simple.pdf?attredirects=0&d=1] exported from CR4E. It is expected to display "漢字" (or in unicode as "\u6F22\u5B57"), but instead being rendered in different ones of "殱塸" (in unicode as "\u6BB1\u5878").
Look inside into this simple PDF file (you can just open it with your favorite text editor), here is its page content:
8 0 obj
<</Filter [ /FlateDecode ] /Length 120>>
stream ... endstream
endobj
Decode this stream, we get:
/DeviceRGB cs
/DeviceRGB CS
q
1 0 0 1 0 841.7 cm
13 -13 569.2 -815.7 re W n
BT
1 0 0 1 25.75 -105.6 Tm     <-- text position
0 Tr
/ttf0 10 Tf                 <-- apply font
0 0 0 sc
( !)Tj                      <-- show glyphs [20, 21], which index is to embedded TrueType font subset
ET
Q
The only embeded font subset is defined as:
9 0 obj /ttf0 endobj
10 0 obj /AAAAAA+MSGothic endobj
11 0 obj
<< /BaseFont /AAAAAA+MSGothic
/FirstChar 32
/FontDescriptor 13 0 R
/LastChar 33
/Subtype /TrueType
/ToUnicode 18 0 R                            <-- point to a CMap object
/Type /Font
/Widths 17 0 R >>
endobj
12 0 obj [ 0 -140 1000 859 ] endobj
13 0 obj
<< /Ascent 860
/CapHeight 1001
/Descent -141
/Flags 4
/FontBBox 12 0 R
/FontFile2 14 0 R                            <-- point to an embedded TrueType font subset
/FontName /AAAAAA+MSGothic
/ItalicAngle 0
/MissingWidth 1000
/StemV 0
/Type /FontDescriptor >>
endobj
The CMap object after decoded is:
18 0 obj
/CIDInit /ProcSet findresource begin 12 dict begin begincmap /CIDSystemInfo <<
/Registry (AAAAAB+MSGothic) /Ordering (UCS) /Supplement 0 >> def
/CMapName /AAAAAB+MSGothic def
1 begincodespacerange <20> <21> endcodespacerange
2 beginbfrange
<20> <20> <6f22>                         <-- "u6F22"
<21> <21> <5b57>                         <-- "u5B57"
endbfrange
endcmap CMapName currentdict /CMap defineresource pop end end
endobj
I can write out the embedded TrueType font subset (= "14 0 obj") to a file named "[embedded.ttc|http://sites.google.com/site/cr4eexportpdf/inside-the-pdf/embedded.ttf?attredirects=0&d=1]", which is really a tiny TrueType font file containing only the wrong typefaces for "漢" & "字". It seems everything OK except CR4E failed to choose right typefaces from the TrueType file (msgothic.ttc).
Is it any help? I am looking forward to any solution.

When open Toshiba Console Utility i have to put a password

I want to be able to boot on CD-ROM and i found that it can be possible with the Toshiba Console utility but i've got a problem... When I click on Toshiba Utility, I've got a popup that ask me for a password, but this password is different from the BIOS ...
What can I do ? help me please :(

Hi there,
Hm, I cannot help you finding out the password for the Console. Maybe you should uninstall it and reinstall another version.
To change the boot order you should set it in the bios if you are not able to do it under Windows. Sounds logical, or? ;)
Greets

Help toshiba recovery utility

satellite pro a 210 goes through ram disk setup and comes up to toshiba recovery utility and asks for machine model. i have tried many numbers and only get wrong machine. any ideas

It' s very easy to do it:
1. You should make a windows clean installation, install all the drivers and programs you like. It can be antivirus, download manager, video players. But I recommend to install the most necessary programs otherwise more space required.
2 Download and install ,, Acronis true Image,,. then, activate it, Google can help you how to do it.
3 Run Acronis, Click on Backup at left side panel. Then, click on Disk and Partition Backup, the new window appears ,,Backup wizard,,
where:
a ,,What to back up,, - Mark the Os partition located. In my case, it's C disk partition.
b ,,Archive Location,,- Browse where you want to store hdd backup, should be another partition for example D: partiton
c ,,Scheduling,, - choose, don't schedule
d ,,Back up method,, -Full
e ,,what to exclude,, Just ignore
f ,,Backup option,, you can choose a password protection,, and other options
Press ,,Proceed,, and it will start backing up, it takes about 10-15 minutes.
Now, you need to manage acronis secure zone. go to Tools and utilities and choose acronis secure zone.
in
a. ,,Free space selection,, - Mark NTFS C
b ,,Size,,- choose 250-300 mb space
Then, click on Finish and Proceed. it will proceed and then ask you to restart it. After restart it will perform ,,Partioning,, and restarts again.
In Tools and Utilities, choose Acronis startup recovery and press activate. So, on the laptop startup you just need to hit F11 to enter the Acronis recovery utility and follow all the instructions. In 10-15 minutes, you will get the new installed system.

Toshiba fingerprint utility cannot unprotect file

Im haveing toshiba qosmio x500 win 7 64-bit. my toshiba fingerprint utility was running fine and i had some files protected by fingerprint password. i have the old settings backup file and (.tofp file) and the fingerprint key file (key file)
I recently uninstalled the utility and re-installed it, as it use to sometimes act strange. But after this, even if i import settings from the old backup file, i cannot unprotect the files that were previously protected.
i get the message "You haven't backed up your key yet" (click here to see error http://www.mediafire.com/?qc4t28jv9bjmtm5 )
I have tried exporting the settings again to a new file, but i dont know how to unprotect the old files.
Please help.

i really do not think you need any other fingerprint files to decrypt your files. If you used your fingerprint (*by swiping*), you most likely will not need anything else except the software itself that was used to encrypt in the first place. If you used a file (that is, instead of typing in a password or swiping your fingerprint), you will need that exact version of the file again. If you swiped your finger, the encryption data is embeded within the file.
Make sure you are swiping the correct finger
I hope the encryption software asked you to swipe a few times to ensure that future swipes can be reproduced by you
Try different angles, speed, starting and ending location of your finger when you swipe
If you are logged on as a different user, the OS (Windows) will do its own encryption on top of your own encryption. That is unencrypted text file of another user will be encrypted by the OS and will not be accessible by another user.
I really do not think any software will be so dangerously ignorant enough to save the user's fingerprint data into another file then use that and only that to decrypt the files, defeating the purpose of having the correct user to swipe.
The software shoud/may have indications of the software company responsible for the program. Perhaps one of the programmers may be able to divulge what is needed to decrypt a file
Best of luck.

Toshiba Fingerprint Utility

Hi,
For some reason Toshiba Fingerprint Utility will now not unlock my files, can anybody help?
I am running windows 7 on a satellite A300.
The fingers that were scanned are the ones stored and I have no problems using the software to log on or for the occasional website passwords. The files just create an error message when i try to unlock them, strangley i was unable to unlock a few but not all.
As far as I know I have not made any updates that would affect the finger print utility.
Please help as these files are vital to my work.
Thanks in advance

Since we did not have the full Model# to assist further, our shorted check reveals A300 series came with Vista. If you did an upgrade to Win7 and utilized the Win7 fp utility that is where the problem lies. It turns out that for some reason, in some instances, it is necessary to have two profiles active at the time of the installation of the fingerprint utility on Windows 7. Uninstall the utility, activate a second account (use "Guest" account) and then a reinstall (util_fingerprint..). Ran through the fingerprint registration and it saved. It also asked for a second sampling (different finger) and it also worked. Just remember not to use same fingers as initial setup.
After rebooting and checking that all worked, disable "Guest" account and then try locking the computer. The fingerprint scan worked nicely and unlocked the machine. Another reboot and test of the login using fingerprint and all is well. Go to download page of the support site (http://pcsupport.toshiba.com/windows7)checkn download tab and follow the prompts downloads for your machine. Worked on a P105-S9339 unit. OR, you can try scan of fingers not previously used to setup a seconday profile. Caution-what may have worked for some may not work for you-thus have Recovery Media handy and backup all stuff. Caution

Toshiba Display Utility is incorrect driver 3-9-2015

Similar Messages

Maybe you are looking for