Toshiba DVD Player on Satellite U300 does not work

I have a new Sat U300 and the Toshiba DVD player refuses to work a, the message is that a module is missing.
Any ideas?

Hi,
wheres the problem. Uninstall the current installed version and reinstall the Toshiba HD-DVD player. It would be the best if you look at the [Toshiba Driver Download Site|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] for updates of this program.
If this does not help, backup all your files and perform a full system recovery, which should really help.
Otherwise, give some feedback here.
bye

Similar Messages

CD/DVD drive of Satellite A30 does not work properly

I have a satellite A30 - 921, but for some reason the cd/dvd has stopped working. In Drivers folder it says "driver corrupt/missing. (Error code 39). It will not roll-back or update either. Do i need to download the driver ( it is Toshiba dvd-rom SD-R6112) again & if so how/where? I cant use the recovery or installation disc as it wont read the drive. Any ideas pls.

So, you want to tell that your CD/DVD-drive is defective and you cannot read from it nor recover your system.
To download drivers you should take a look here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Otherwise I suggest you to bring your machine to an authorized service partner for a hardwarecheckup. If your drive is really defective then it should be replaced.
If you need some help to find a service partner, then click on this link to find the nearest available ASP in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Greets

My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

I have installed the latest version of Adobe flash player and it still does not work what did i do

I have installed the latest version of Adobe flash player and it still is not working and every time I enable shockwave the internet does not respond

Clear your cache Tools > Options > Advanced > Network > clear now
Right-click on video > Settings > turn off Hardware Acceleration

DVD Player 4.6.5 does not recognize external DVD drive

I had to get an external DVD drive (Sony DRX-S70U) for my Intel iMac after the built in one crapped out. I just put in a DVD and when DVD Player 4.6.5 opens it says "There was an initialization error - A valid DVD drive could not be found. [-70012]"
But the DVD appears on the Desktop. So it knows its there, just DVD Player won't work. Is there any way to change the preferences or anything so that DVD Player will work? I know I can download a 3rd party software, but I'd like to use the Mac stuff if possible.
Thanks!

Try this.. Read the NOTE in 10. FIRST.
1. Create a New User: Sign in as New User.
2. Dbl Click HD Icon, locate User Icon. This will show your orig user and the new user acct.
3. Click the New User.
4. Locate the Library Icon and open it.
5. Locate Applications Folder, open it.
6. Locate DVD player folder. Open it there are 2 folders. (this is good). Red X Close
7. Use the EDIT from top menu bar. Make Duplicate, this copies the folder without the 'copy' name on the file. "DVD player" is what you want. Otherwise wont work.
8. Paste it to your desktop.
9. Close the New User folder. This drops you back to Users folder.
10. Open the original user acct. **NOTE, at this point you may begin to see little red dots on the folders. When you see them, Click on the LIB folder, then use the "GET INFO" command to show the status of the permissions. Click the DETAIL tab, and click the yellow lock next to OWNER. Change ownership to read as your orig acct. Change permissions to READ AND WRITE. Group: Staff (it worked for me). Click APPLY TO ENCLOSED ITEMS, click the yellow lock. Check the info before closing the menu. You may have to repeat this as you delve deeper.
11. Dbl click LIB, then Application Support. Then paste or drag the DVD player folder in.
12. Close out all windows, LOG off as new user.. Log on as Orig user.
13. Dbl click HD icon, Applications Icon, find DVD player Dbl click that. It should work.
Thanks to all the input from the Discussions that allowed me to solve this problem.
iMac FlatScreen 17in G5 Mac OS X (10.4.7) 760 ram

DVD player on Macbook pro will not work

I have a couple of problems with my Macbook pro:
1. it will not recognise any devices all of a sudden i.e my camera
2. DVD player will not work and keeps coming up with an error message.
please help

Help us help you by posting more info:
MacBook Pro variant and screen size (there have been many since the MBP was introduced 8 years ago)
Mac OSX version
If the DVD failure with burned disks or commercial DVDs? Will it mount a commercial CD?
If you don't know your MBP version and your OS version is 10.7 or higher, you can get it by doing "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button to get this:
Do not post your serial number here, but include everything else

Player Settings Menu Intermittently Does Not Work / Settings Manager Crashes - Firefox 6.0/Windows 7

1) I occasionally have a problematic issue with the Flash Player Settings menu, primarily with SocialVibe (media.socialvi.be) applications associated with FarmVille, activities such as video quizzes and interactive surveys. Sometimes after loading these applications, the Player Settings menu opens requesting permission for local storage space changes, however I am unable to left-click on anything at all within the Player Settings menu: Allow/Deny the requested change, manual storage setting adjustment, switching tabs within the menu, or (particularly frustrating) to close the menu. Usually if the Player Settings menu requests a local storage change, I can select my preference and it works properly.
When the Player Settings menu opens and is non-functional, the application will still run in the background, seemingly without issue, but is inaccessible because the Player Settings menu is active. I have tried closing/refreshing the application, but the menu still remains unusable. Many times there are several activities offered one right after another. When one is completed, the link refreshes and a new application becomes available. Each application is unique and only available for a very limited time. The inability to make changes or close the Player Settings menu effectively blocks these activities from being completed. Since I cannot complete the activity, the link for itwill not refresh, so I am stuck with an application where the Player Settings menu will not function properly and I have no opportunities for new activities.
Interestingly, when the Player Settings menu is oblivious to left-clicking with the mouse, I am able to select the options of Allow/Deny/Close by using the tab key on the keyboard to highlight the appropriate button, however pressing enter does nothing. I can also right-click with the mouse and access the menu for Settings/Global Settings/About, which works properly. In this menu, when I choose Settings, it takes me to the Local Storage tab of the Player Settings menu, however I am still unable to make any changes, switch tabs or close the menu. When I choose About, it will load the Flash Player webpage and it does tell me that I have the most current version (10,3,183,5) successfully installed. When I choose Global Settings, it will open the Flash Player Settings Manager, which I am able to navigate and modify (mostly, related issue below).
2) I also have an issue with the Flash Player Settings Manager. When I try to open the Local Storage Settings by Site, the Settings Manager will usually crash. It crashes whether I open the Settings Manager from the Player Settings right-click menu or through the Windows Control Panel. I had originally assumed that there must be so many websites listed that want storage permissions that it takes a while to load, but until this evening it had never loaded successfully and would go unresponsive almost immediately. This evening I attempted to access the Local Storage Settings by Site many times, crashing and restarting the Settings Manager, until it finally loaded.
In the Local Storage Settings by Site, media.socialvi.be (SocialVibe) is shown as having 0kb Storage Used and Ask Me under Storage Settings. Because every application from SocialVibe is different, I want Flash to ask me each time it wants to change the storage settings, so I do not want to set its permission to Allow. From reading through the Flash troubleshooting webpages, I understand that choosing Block may cause the applications to not run correctly, and I do want them to run properly. The local storage request from media.socialvi.be was 5kb as shown in the Player Settings menu (that wasn't working), so if the Player Settings menu is not functioning and I must allow some level of storage, is there a way that I can specify how much to allow using the Settings Manager without setting the permission to Allow? I do not feel that websites should be able to store as much information as they see fit on my machine, and as I want to keep as much advertisement information, tracking, cookies, etc. off my computer as possible, setting the permission to Allow seems to be a risky permission.
System Specs:
162 GB Free harddrive space (220 GB Total)
Pentium(R) Dual-Core CPU [email protected] GHz
Windows 7
Mozilla Firefox 6.0
DSL Cable Internet Connection
Thank you

Try http://forums.adobe.com/thread/892474

Flash Player 9 and JavaScrip does not work

Hi
That works on every browser, on every platforms with every
Flash player version except Flash Player 9 on Mac Internet
Explorer. I use a getURL to call a simple JavaScript function. The
javascript just don't execute. A simple alert(5); does not display.
This, only on Mac explorer with Flash Player 9
// In Flash
getURL("JavaScript:alert(5);");
Any idea

Having similar difficulties with Adobe Flash Player.
Microsoft Windows 7 Home Premium
System Type x64-based PC
Firefox 9.0.1 (32-bit)
Windows Internet Explorer Version 9.0.8112.16421 (IE9 came preinstalled computer when purchased, have IE9 32-bit and IE9 64-bit)
Adobe Flash Player 11.1.102.55
Flash Player has identical problem in BOTH Firefox and Internet Explorer.
All video applications work properly EXCEPT Adobe Flash Player.
When visiting sites that have embedded flash video, a black box shows in the space where the video should be and a video never appears.
Right-clicking mouse within black box brings up dialog box for Flash Player Settings.
Have uninstalled Adobe Flash Player and then restarted system.
Installed Adobe Flash Player and then restarted system.
Adobe Flash Player is installed and working correctly (according to Adobe's "Check if your player is installed correctly" page).
When checking "Programs and Features" from Windows 7 "Control Panel", only the 64-bit version of Adobe Flash Player shows as installed when Adobe Flash Player Install specifically states 32-bit AND 64-bit versions will be installed.
Additional Information
Web Browser is closed immediately after successful download of Flash Player PRIOR to installation.
Flash Player Trust Folder (Contains: Adobe Illustrator CS5 FXG.cfg, AdobeFireworksCS5.cfg, AdobeXMPFileInfoCS5.cfg)
Flash11e.ocx (Active X Control)
FlashAuthor.cfg (CFG File)
FlashInstall (Text Document)
flashplayer.xpt (XPT File)
FlashUtil11e_ActiceX.dll (Application extension)
FlashUtil11e_ActiveX (Application)
FlashUtil11e_Plugin (Application)
NPSWF32.dll (Application extension)
Shockwave Flash 11.1.102.55 Up-to-Date
11.1 r102
Add-Ons Manager: Shockwave Flash 11.1.102.55 is ENABLED
Message was edited by: C.Turnipseed

FN+F8 on my Satellite L505 does not work, I can't enable WLAN card

I'm enjoying my notebook until yesteday, suddenly it can't conntect to wifi, when i check "manage wireless network" it says "currently not enabled.
The only way i know to enable it is to press FN + F8 keys to turn my wireless on...but whenever i press FN the f8 key does not appear on the screen...please help!

All Programs -> Toshiba -> Flashcards -> TfcConf -> and run TfcConf
That program will have an option that will say something like "Enable Mouse" (I don't have it in English but you will find out) and depending on the time you put flashcards will appear if you put the mouse on them

I installed flash player 11 but it does not work

i use firefox 64-bit computer and i got an update notice today so i downloaded it, i go to youtube to watch a video but it every video says "this video is not available" then i go to other sites that play videos and those don't work, I tried to unintall then install it again but it did not work. I wanted to install an older version of adobe flash player but it doesn't allow that now I don't know what to do.

Hello,
Welcome to Adobe Forums.
You can follow these steps to install an Older version of Flash Player
Step 1 : Download Adobe Flash Player uninstaller from here : http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe
Step 2 : Download and save the uninstaller, then close all the browser and run it.
Step 3 : Download Flash Player 11.2 installer from here : http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win/install_flash_playe r_11_active_x_64bit.exe
Step 4 : Follow Step 2 again.
Hope this helps.
Thanks,
Vikram

Satellite A100 does not work anymore

Hi,
I bought a broken laptop and when I boot it up, I get very little:
all i get is 2 blue lights and a couple of red ones above the keyboars for around 1 tenth of a second.
I was thinking of resetting the bios.
I disassembled it and could not feel any heat going to processor but the board must work as the wireless card switch lights up along with start key but no fans or nothing else.
please help

First of all, I wonder why you bought a broken machine when youre not able to fix it.
If youre not a technician then sell the machine and buy a working one because no one here would exactly could tell you what to do or how to fix it.
The only posts would be like: "send the machine to an service partner" or "change the mainboard" or "sell the machine" , "throw the machine into trash"
I would assume that the mainboard is defective and needs to be replaced. I already replaced some mainboards on toshibas and its not that easy like some people think. You need some experience and often its not only the mainboard which is faulty, sometimes there is more then you assume.
I hope you get it fixed. Good luck.
Greets
P.s.: If you need a helpful site for something you would like to do then check the following link: http://www.irisvista.com/tech/

Wifi adapter of Satellite M30 does not work anymore

During these last couple of days the wifi adapter in my Satellite M30 have had a way of dying once a day.
The first time I still had a light and I could see when I turned it on and off. When that didn't help to get it going again, I decided to reboot and the wifi died completely.
Later, when I did a scan for hardware changes in the Device Manager, the adapter popped back up in the list of devices again and worked just fine.
At least up until today. A couple of hours ago it died again for no obvious reason and now I simply cannot get it back at all.
I might mention that yesterday the light didn't come back on after I did that scan for hardware changes and got it to work again.
When I tried to update the drivers it keep telling me that the drivers are already up to date and now I don't know what to do.
Is this a hardware problem and what can I do about it?
This laptop was 4 years and well used just a few days ago btw, but it never been taken apart and I've never had to send it in for service.
I would appreciate any help I can get.
Christa

Hi there,
thats definetly a hardware problem and it can only be resolved by exchanging the wireless LAN card. You can check if it works under linux (just download some live-CD e.g. knoppix, and let the OS recognise the wifi card - if it wont recognise then its definetly broken).
You could also contact an Authorized Service Provider and ask them for a hardware checkup but I guess they will charge you for that.
You have the choice... :)
Greets

DVD STUDIO PRO: Menu Button does not work when in Simulation mode

How can I make the MENU BUTTON work when I am playing my DVD in SIMULATION MODE? Right now nothing happens when I click on it. I want to make sure it works for the user.
Thanks

Not sure I understand. Are you talking about the menu button on the remote control? If so, I think you need to check the inspector for the disk in dvdsp and make sure the correct menu is selected for this button. The behavior of the menu button can be a little tricky. If I remember correctly, it usually toggles between the menu and the track.
If you're talking about a button you've created on a menu, select the button and set the target in the spector.

Re: TouchPad on Satellite L30 does not work anymore

Yesterday when I connected my Notebook L30 to a projector , the windows hanged and after that the Pointing Device on the Touch Pad isnt working, I tried to install Synaptics also but no gain from it.
Please Help me !

Hi there,
did you already tried the key combination FN-F9?? This key combination reactivates the touchpad in case of deactivation.
Otherwise, backup all you important data and recover your machine since it would be the last solution to make the touchpad working again.
Greets

What can I do about this message -"Toshiba DVD Player has stopped working"

Hi
My DVD Player used to work fine . . . and then I installed iTunes.
It then worked for a while, but only by using 'Run as Administrator'.
After a couple of weeks I started to get the message "Toshiba DVD Player has stopped working".
I have uninstalled iTunes - and uninstalled and then re-installed the DVD Player - but it still will not work!!
Any solutions please?
Thanks in advance for your help.
Ms Q_reeus

My solution to this is to remove Toshiba DVD player and install VLC player. You can get it for free.
It can read all video formats and you don't need some additional codecs.

Toshiba DVD Player on Satellite U300 does not work

Similar Messages

Maybe you are looking for