Toshiba e-Studio 3511c Possible Solution [aka "eStudio" and "e Studio"]

Greetings --
I upgraded to Snow Leopard 10.6 this weekend and just knew that I would have printing problems (I always do when performing an upgrade...) and trolled the message boards to help resolve my anticipated problems with my Toshiba e-Studio 3511c. As my solution does not appear to be reflected in any of the posts that I have seen I thought it might prove to be helpful to post it here.
First, the Toshiba itself has a variety of network settings. The are accessed by pointing your web browser to the IP address of the copier (my Windows tech guy had set it to a static IP address some time ago to avoid intra-network conflicts and told me what it is; I think that a static address is important so that the Mac always knows where to print to). While I played around with the settings, they did not appear to resolve my problem, and I reset them to the state that I used with 10.5 and earlier versions of OSX, to wit:
Address Mode: Static IP
Enable IPX/SPX Disable
Enable Apple Talk Enable
Enable Bonjour Disable
Enable LDAP Disable
Enable DNS Enable
Enable DDNS Disable
Enable SLP Enable
SMB Server Protocol Enable
Enable Bindery Disable
Enable NDS Disable
Enable HTTP Server Enable
Enable SMTP Client Enable
Enable SMTP Server Enable
Enable POP3 Client Disable
FTP Client Default Port Number 21
Enable FTP Server Enable
Enable SNMP Enable
I don’t know what most of these mean nor the effect on printing for any but will be glad to provide additional detail to other hapless users of e-Studio 3511c’s -- simply e-mail me at [email protected].
Next, download the driver package from http://www.copiers.toshiba.com/support/downloads.jsp?site= ; I downloaded “- dmg.gz - Mac OSX (from 1.70 CD) 06/14/07 1.70” and installed it. Unlike other posters, I received no error messages. Like other posters, I had to take this step because 10.6 deleted my old PPD’s.
Then, do the “Add Printer” thing from System Preferences's "Printer and Fax" control panel. After flailing about for quite a while, I found the following worked:
IP printing
HP Jetdirect - Socket
[my Toshiba’s static IP address]
Amazingly (to me, anyway), the PPD was immediately identified and placed in the “Print Using” selector (it is the 4511 driver and there are two versions -- if you are in the U.K. I assume that you would use the U.K. version, I used the “other one”). (I was also quite shocked that the "HP" setting worked -- this is obviously not an HP printer!)
Anyway, the click “Add” and perhaps select your Toshiba's add-ons, if any.
If anybody has any questions about this “stuff,” please feel free to e-mail me directly at [email protected], as I do not really monitor these message boards.
I hope this helps!
-- Kevin

Hi dude
Here on this page you can find the Toshiba page which provides manuals and software for printers, fax, etc
https://electronicimaging.toshiba-europe.com/
In User Manual options please choose:
Document Managers -> E-Studio 160
Here you could find some user manual (Network, Printers, etc) which could help you to sort out this issue.
Good luck

Similar Messages

Possible solution for -8 and other connection errors

I've been struggling recently to make connections with people, often seeing the -8 error. This happened even with the most simple network setup we could find, with our routers either running with uPnP enabled or disabled, and ports forwarded or not. Often we could connect individually to the Apple test accounts, but not each other.
The fix that worked for me, and also for someone else on these boards, was to look at our network "ports" on the Macs themselves. Not the TCP/UDP ports, but the "ethernet" , "airport", etc.
If you open system preferences, Network, and from the Show: dropdown at the top choose "Network Port Configuration" you will see the hardware network ports on your machine. If you use your machine in multiple environments, such as with a wired Ethernet port, Airport, perhaps a Firewire network too, your Mac may have several IP addresses assigned to itself, even if only one is active. Installing virtualization software such as Parallels adds more ports here, with more IP numbers.
Whilst running iChat in debug mode, and watching outbound connections through Little Snitch, I saw that firstly iChat thought I had multiple IP addresses which it attempted to open uPnP with, and secondly my outbound packets had the private internal IP address of one of the Parallels network ports the person I was trying to communicate with - which would never be delivered.
What we did was disable all the ports in the System Preferences described above, except for the one in use. We then restarted iChat and our video streams opened! I believe that iChat simply gets confused about which IP address to do its uPnP mojo with, and disabling the ones not in use makes it choose the correct one.
If you follow this advice, remember to re-enable the ports you disable when you use want to use them in future.
I'm convinced this is the cause of the problem - even when I use my MacBook behind a commercial locked down Watchguard firewall the video conferencing still works, which suggests that it's not the opening of ports through the firewall that's the issue, at least for some people.
I hope this is useful information for people struggling with -8 errors - let me know how you get on.

Intel macs, since 25 febr.
"watching outbound connections through Little
Snitch"
Interrupted connections under some circumstances
after applying the AirPort Extreme 2007-001 update:
This is (often) soluble by disabling any third-party
wireless signal monitoring or sniffing utilities.
I don't think Little Snitch was causing any problems, for me at least. It did let me see that it was trying to talk to the other machine's non-active IP address, which is what led me to turning off the other network ports.
It's quite informative to see which TCP and UDP ports are being actively used, and where they're going.

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
Please help me!

We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

Toshiba E-Studio 603 stop working after Mavericks Upgrade

At my work place we have a department shared printer through cable ethernet. I've got my rMBP hooked up by a USB ethernet adaptor to the network. The printer used to work properly with drivers installed (official from Toshiba) under Mountain Lion.
However after I upgrade to Mavericks, whenever I print the Printer job will say "Printing - Connecting to printer" then freeze for a couple of minutes until says "The printer is not responding" and freeze forever unless I close the Printer job window.
I've tried reinstalling the driver, resetting printer system then add the printer back, reinstall system, etc. Also I'm pretty sure that the department code fields are entered and selected everytime I tried. Thus far no solution.
Has anyone experienced similar issue? Or has anyone got solutions? This has been really frustrating to me. Thanks!
Steven

Thanks for responding. Before adding the printer I'll install their driver and select the one from list. There's the option for toshiba e studio xxx, so I wasn't selecting anything else.
Anyway the problem is it used to work the way I set up in mountain lion, but not in mavericks.

Toshiba E-studio 160 - LAN interface password

I have a toshiba e-studio 160 series, with ethernet card.
As i have to change tcp/ip options, i need to know the password!!!
(please, don't ask why i dont' know it :_| )
I read somewhere that should be possible to show the admin password by:
1 - powering the machine in TEST MODE (pressing 0&8 while powering)
2 - typing 263 and pressing START
Point 1 it's ok, but point 2 doesnt' return any information.
Maybe the page where i read this trick was for another model, different than e-studio 160, and so i have to type another number..
I hope that someone could help me :)
thanks
Matteo

Hi dude
Here on this page you can find the Toshiba page which provides manuals and software for printers, fax, etc
https://electronicimaging.toshiba-europe.com/
In User Manual options please choose:
Document Managers -> E-Studio 160
Here you could find some user manual (Network, Printers, etc) which could help you to sort out this issue.
Good luck

IPod is not recognized by Windows Vista - possible solution

During the past couple of weeks that I faced this problem I found out that a lot of people had the same question as I did.
Here is a possible solution.
I have HP Pavilion laptop with Windows Vista. After I connected my new iPod – it didn’t show up in My Computer as a new device and in Device Manager it was listed in “Other devices” with a question mark next to it. I already had iTunes installed – it didn’t show up in iTunes. On the attempt to reinstall the driver I had a message that the driver was found but an error occurred while installing it.
Here is what I did:
1. Install iTunes (it has iPod driver for Vista in it).
2. Turn on iPod and connect it to computer.
3. Restart computer with iPod turned on and connected to computer.
4. On the start up the computer will begin automatically installing the driver and the message will appear in the corner that new device is being installed.
5. After it has been installed – check My Computer – you should see it listed there.
6. Run iTunes and configure iPod.
iTunes might run a little bit slow when configuring iPod for the first time.
Good luck.

if only this fix worked for windows xp or even 2000 (at my job)
insane, but it IS a driver/usb problem i now know, at least i've gotten that far.

Possible Solution to Google Search Bar Not Working/Safari Not Loading Pages

Hello Apple Forums,
I have recently encountered a possible solution to a problem with Safari. The one in which Safari fails to load any page associated with www.google.com. Especially the Google Search Bar—a feature I use frequently.
After browsing through the forums about the Google Search Bar issue, I took my knewly gained knowledge, and decided to do some diagnosing for myself.
This is what I have done so far to try and solve this issue:
Run Daily, Weekly, and Monthly Cron Scripts
Cleared the following caches:
System Local Computer Cache
System VM (Swap) Files
Curent User Cache
Current User Icon Cache
Internet Explorer Download Cache
Page History
Web Site Cache
Temporary Files
Safari Downloads List
Form Values
Page History
Recent Searches
Site Icons
Web Site Cache
User Cookies (used by Safari)
Finder Recent Applications
Recent Documents
Recent Folders
Recent Servers
Recent Files of AppleWorks 6
Disk Utility Disk Images
Preview
QuickTime Player Favorites/Recent
REALbasic Projects
TextEdit
VideoLanClient
and Other caches of Acquisition Current Downloads
Acquisition Recent Searches
MSN Conversation History
Vicomsoft FTP Client Icon Cache
All of the above runnings of Cron scripts and clearings of Caches were done using Mac Pilot version 1.1.5 (yes the one on the site is an updated version, but I have not downloaded it yet). If you decide to use this program to clear caches, I advise not clearing the Installer Receipts under the System section as Installer Receipts are used to correctly repair permissions. I do not clear Find File Indexes either, because I use the Find File feature quite frequently on my computer and I do not want to have it re-index files all the time (perhaps I'll do it every few months or so to refresh what I've got on the harddrive). Remember, all the information given in this paragraph is relative to Mac Pilot version 1.1.5.
In addition, I have also repaired permissions using Disk Utility 10.4.4 (v145.7) (make sure you restart your computer after you repair permissions). I have taken out items in /harddrive/library/StartUpItems as well as taking out items in /harddrive/library/Internet Plug-Ins and in /user/library/Internet Plug-Ins and in user/library/Caches (restart your computer after taking out or putting in items in these locations).
As of now, all the information mentioned above about trying to fix this problem have NOT worked.
What HAS WORKED for me was tinkering with my 3rd party firewall—Norton Personal Firewall Version 3.0 (48). Under the Protection Settings, I HAD Enable Active FTB support, Enable Stealth mode, Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected), Enable UDP Protection (with Protect outgoing UDP connections, Allow access to essential services, and Protect a range of UDP ports 1 through 1023 selected).
What I CHANGED in Protection Settings was DESELECT Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Upon deselecting that information the Google Search Bar feature in Safari WORKED practically instantaneously. Before hand, anything I inputted into Safari and after hitting Return on the keyboard just wound up hanging there.
Just to be sure, all tests were performed on:
IMac G4 800 Mhz SD Mac OSX 10.3.9 with ALL the latest Software Updates, Except Apple Remote Desktop Client version 1.2.4 and iPod Updater 2006-01-10
I have a cable internet connection with ISP Time Warner Cable (RoadRunner) using a SurfBoard SB4100 Cable Modem on an AirPort Extreme Base Station (Apple Base Station V5.6)
Interesting side note: I have a PowerBook G4 15" 1 Ghz Mac OSX 10.3.9 Laptop running on the same network (although it has an airport extreme card as opposed to the regular airport card in the iMac) with ALL the same latest Software Updates, Except iPod Updater 2006-01-10. The Apple Remote Desktop Client version 1.2.4 does not come up on Software Update on the Laptop and I can not find it on the harddrive using a name search in the Finder Find feature. It does not show up in Applications folder, so I do not know if it is on or active on the Laptop.
The LAPTOP IS ABLE TO USE ALL GOOGLE FEATURES without DESELECTING Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Why this is apparent I have not officially confirmed.
What I do know is that I have tried to Uninstall Norton Personal Firewall Version 3.0 (48) with the appropriate uninstaller but it FAILS during the uninstall (I wanted to uninstall and reinstall, it appears the program became corrupted). What I did to possibly circumvent this was to search for the phrase 'Personal Fire" using the Finder's Find feature (Search for items whose name contains 'Personal Fire') and deleted all the files that came up related to Norton Personal Firewall Version 3.0 (48). I then reinstalled Norton Personal Firewall Version 3.0 (48) since then, and it continues to have the problem with Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected).
What I have not done:
Updated Prebinding
Run TechTool Pro version 4.1.2
Install Combo OSX 10.3.9
Initialize HardDrive with complete reinstallation of OSX 10.3.9
To Summarize Possible Solution
I've tried many possible solutions, what appears to work best as of now is to DESELECT Enable suspicious activity protection (making sure Deny outgoing suspicious traffic and Deny incoming suspicious traffic are deselected) under Protection Settings in Norton Personal Firewall Version 3.0 (48).
One could try deselecting something similar in any firewall application other than Norton Personal Firewall Version 3.0 (48), to see if it is suspicious activity settings in firewalls that cause the problem.
Any comments/feedbacks are extremely welcome.
Hope It Helps!
iMac G4 800Mhz SD 10.3.9 & PowerBook G4 15" 1 Ghz 10.3.9
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD
iMac G4 800Mhz SD

Hello tr:
Welcome to Apple discussions and thank you for your very very thorough post.
Your instincts to delete anything named "Norton" were right on the mark. Norton software is POISON to Macs running OS X. An additional software firewall is, IMHO, completely unnecessary. Turn on the built-in firewall in OS X - it is robust. In fact, if it is already on, there may be a conflict.
Go to Symantec's web site and use the uninstaller you should find there to get rid of the Norton stuff. After you do that, do a "find" on Norton and Symantec to be sure it is all gone - the stuff hides everywhere.
Barry

I haven't been able to watch any of these three movies because of a pop up saying ''Unknown error (-42110)''. I have tried the possible solution but none of them have worked,they will expire soon.pls help

I have rented 3 movies added up to a whopping $15.I have tried the possible solution but none of them have worked,they will expire soon.pls help

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution?

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution? I'm using Andriod version 4.4.2 with kernal 3.4.0.

@MaloneTP
Thanks for keeping me updated! Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air? Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY. Keep me posted. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

HT1414 I updated to iOS 6.1.3 a while ago, but recently noticed I can't access wifi (when the wifi off/on switch is frayed out) does. Anyone know a possible solution to this problem.

This problem occurred in the last few weeks and is a real downer for me because I like apple products but if I can't use wifi then I can't do my work or use much data Any possible solutions will help. Thanks

Hi DJK2012,
If you are having an issue with the Wifi option greyed out, you may find the following article helpful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Regards,
- Brenden

Windows 8.1: Printer Offline Issue - POSSIBLE SOLUTION

Hi all - I came across this extremely annoying problem between my Toshiba Win-spit-dows 8.1 (shudder) laptop and my HP 71197B Photosmart 5510.
a) I found out my printer ip using Fing on my mobile - use any method to find this out.
b) I typed this into my browser and loaded the web interface
c) Using a video from the HP site I easily switch to a Static IP.
d) I then found the printer settings/Properties and clicked on Ports
e) I then added a new port - the printer was on WDP or something.
f) I used the new static ip (again found this from Fing) as the address and called it HP Printer.
g) The laptop found the printer and got all the details
h) Word then showed the Printer online.....print!
i) Got a print faded document because all the black had been used up doing test prints.... but it ruddy prints!!!!
Hope this helps someone!
Frank

Hello,
Thank you so very much.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions?

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions? SecSigner is not responding.

Well, I contacted SecCommerce about the issue, the response was, that I should sign the file later (afterwards). This is a solution, but not the best in my opinion.
When I sign the document the SecSigner window/Java window appears and freezes. Adobe is not responding. I have to terminate Adobe because the program is not responding.
I only found this support website, so I have realized that this is a User 2 User site, but it was a try to get some help.

I have just updated to the new iOS 6, and all my contacts have disappeared? Is there a possible solution to get them back?

I've just updated to the new iOS 6 and all my contacts have dissappeared, is there a possible solution to bring them back, I really need them back. Thanks in advance.

You tried clicking on "phone" then "groups" and "Show All Contacts"

OS X 10.9 freeze when WiFi is turned off (POSSIBLE SOLUTION)

Hi, I just found a possible solution for this problem: my MacBook Pro freeze completely (without the spinning beach ball) after I turn off WiFi.
I have a MacBook Pro 17 inch late 2007 (MacBookPro3,1 - A1229), with a NVIDIA GeForce 8600M GT 256 MB card, running OS X 10.9.
What happened:
- I updated the OS from 10.8.4 to 10.8.5
- My Mac started freezing everytime after login, I don't remember if WiFi was on or off
- Reverted back 10.8.4, thank you Time Machine!
- Updated to OS X 10.9
- Everything was OK, but then I did some work in my home and I had to turn off the modem
- Modem was off, so I decided to turn off also the AirPort card on my MacBook Pro
- After a couple of seconds my computer completely stopped responding, trackpad and keyboard were useless, the UI froze
- After pressing the power button I managed to shutdown the Mac and then start it up again
- Now after the startup process I was stuck in loop: WiFi was still off and I had few seconds to login, wait for my account to load and turn on WiFi from the menubar icon; I failed countless times!
- In an attempt to slow down the Mac and earn some more seconds I did a PRAM reset and logged in with the Shift key pressed (after typing my password)
- I managed to turn WiFi on and looked immediatly for clues on Console logs:
04/11/13 14:31:02,000
kernel[0]
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
04/11/13 14:31:02,000
kernel[0]
en1: BSSID changed to 90:72:40:16:09:df
04/11/13 14:31:02,000
kernel[0]
2766.617367: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
04/11/13 14:31:02,000
kernel[0]
2766.630567: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
04/11/13 14:31:02,000
kernel[0]
2766.630581: switchVap from 1 to 1
04/11/13 14:31:03,000
kernel[0]
flow_divert_kctl_disconnect (0): disconnecting group 1
04/11/13 14:31:03,980
configd[19]
network changed: v4(en1-:10.0.0.4) DNS- Proxy-
04/11/13 14:31:03,984
UserEventAgent[11]
Captive: CNPluginHandler en1: Inactive
04/11/13 14:31:04,145
netbiosd[170]
network_reachability_changed : network is not reachable, netbiosd is shutting down
04/11/13 14:31:12,814
awacsd[58]
KV HTTP 0
04/11/13 14:31:17,886
awacsd[58]
KV HTTP 0
04/11/13 14:31:27,959
awacsd[58]
KV HTTP 0
04/11/13 14:31:28,344
Google Drive[282]
BUG in libdispatch client: kevent[EVFILT_WRITE] delete: "No such file or directory" - 0x2
04/11/13 14:32:44,000
bootlog[0]
BOOT_TIME 1383571964 0
(Last line is me powering the Mac on, after a forced shutdown; for some reason some lines have been lost forever: before the last one, there were some more "awacsd ... KV HTTP 0")
This is what happen to my Mac when I turn off the AirPort card; I don't know if "Google Drive" or "libdispatch client" are the problem, but quitting Google Drive solved this madness.
Hope this helps.
Also on this forum:
Re: MacBook Pro (2007) 3,1 & 10.8.5 freezing
Re: MacBook Pro (2007) 3,1 & 10.8.5 freezing
Message was edited by: Tom.my

I'm experiencing a similar issue.
In my case, a conflicting kext (kernel extension) from a vitual machine (VirtualBox) was causing an immediate freeze after turning Wi-Fi off. After disabling the kext's scripts, I can now disable Wi-Fi safely but if I reboot then the system hangs at radom instances of boot sequence (for example while showing the apple logo, or at the login screen or a few seconds after entering the password).
I can only boot in single user mode (command-option-S) so after looking around a way to turn on WiFi from the command line, I ended up using a daemon (boot script) that turns on WiFi before anything else happens (at least as soon as the airport card is running).
In any case, I left the instructions here, just for reference.
The script should be created in /Library/LaunchDaemons
It can have any name with "plist" extension, I choosen "com.fixwifi.wifion.plist"
To create the file type: nano /Library/LaunchDaemons/com.fixwifi.wifion.plist
Enter the following text (it's a lot of text, I know, but it is better than nothing):
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Label</key>
    <string>com.fixwifi.wifion</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
        <dict>
            <key>SuccesfulExit</key>
            <false/>
        </dict>
    <key>ProgramArguments</key>
        <array>
            <string>networksetup</string>
            <string>-setairportpower</string>
            <string>en1</string>
            <string>on</string>
        </array>
    <key>StartInterval</key>
    <integer>2</integer>
</dict>
</plist>
When finished, type "ctrl-x", then "y" to save and enter. Reboot.
This script will:
- try to power on the en1 interface as soon as the script loads
- if it fails (because the interface is not running yet), will try to turn it on every two seconds
- once the interface is on (exit is succesful), then unload the script.
Note that this script assumes the airport interface is named "en1". It can also work with the word "airport" (at least in my tests).
Good luck!

Toshiba e-Studio 3511c Possible Solution [aka "eStudio" and "e Studio"]

Similar Messages

Maybe you are looking for