Toshiba e205 Laptop to Panasonic LCD HDTV with HDMI CABLE Problems

I try to connect my toshiba e205-s1904 laptop to my panasonic hdtv through the hdmi cable and it just won't show up on the tv.  The laptop seems to not recognize it.  I've tried it before and it has worked once or twice where the Panasonic tv shows up as a display option.  But I haven't been able to get it to work again.  I put the correct output on the tv and even lower the resolution on the laptop but it still doesnt recognize it.  I get an option where it says display on vga but that's it.  I change it to the projector settings and that worked once.  I've tried a lot of stuff but nothing seems to get it to display on the tv.  I have an integrated graphics card with the hdmi port and am running windows 7 64 bit.  If anyone can help, please let me know!  Thanks!
Solved!
Go to Solution.

if the tv has to be set to vga, does that mean that the hdmi cable cannot be used?  I tried it once where i put the hdmi cable in and then hit the windows key and p to connect it to projector and the Panasonic TV showed up as an option.  But I cant get it to show up again.  My laptop doesnt seem to recognize the tv at all.

Similar Messages

  • Cannot Connect Pavilion dv6 2020sa laptop to HDTV using HDMI cable

    Hi
    I have tried to connect my laptop to HDTV using HDMI cable but it just comes up with a 'No Signal' message on TV, any ideas?  I have done a search on internet with no joy.
    Operating system is Windows 7
    TV is 32" LG LCD HDTV

    I have been having the same issues trying to connect my Laptop to my TV to use as a DVD player. A normal HDTV cable would not work. I went to Best buy, and found a HDMI cable that said "Laptop to HDMI cable" It was the only HDMI cable out of all of the HDMI that said "Laptop to HDMI". It was also twice the cost, $50.00 for a 10 foot cable. It seems a little to high in price so I am looking for a cheaper one on the web. If I find one, I will post to let you know.

  • HD TV or LCD monitor with HDMI,DVI supported to preview and color grading

    Finally I got my canon HFS100 and Intensity Pro now what type of the monitor should I get to preview and color grading video via intensity pro between HD TV or LCD monitor with HDMI,DVI supported and how to calibrate monitor via intensity pro.
    Please help.
    narkin

    The main downside is that an HDTV is designed to be used at TV viewing distance. So it would work fine for presentations, where the audience is sitting more than 5 feet away. But at typical computer screen distance of 2-3 feet, it is the same 1920x1080 pixels spread out over a 32-inch screen. Oh, actually, that HDTV you mentioned is only "720p", which is only 1280x720. That may not look all that good at TV distance either, if you are displaying images that are static (non-motion).
    Your eyes will have to work harder to see the same screen real estate, because everything is bigger on the screen. Images and text will not look as sharp (more pixelated) because each pixel is larger. It won't be like using a 30-inch Cinema Display, which has 2560x1600 pixels. Each pixel on that 32-inch 720p HDTV is more than 4 times larger.
    A 1080p HDTV would be somewhat better, because that is 1920x1080 resolution.

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

  • How to connect macbook pro to panasonic tv with hdmi cable

    How to connect macbook pro to panasonic hd tv with hdmi cable

    Hi m,
    It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
    This is if your MBP is from April 2010 or newer:
    http://support.apple.com/kb/HT4241
    First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
    Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
    If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

  • How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)?

    How do I connect my MacBook Pro to an LCD TV (with HDMI and S-Video ports)?  I assume I would need to use the DVI to Video adapter that came with my computer to connect to my LCD tv.  I'm just not sure which port I should use on the TV.  The HDMI port is being used for digital cable.
    Also, does anyone know if this can be done wirelessly? 

    For a 2010+ MBP you can connect with a Displayport to HDMI, which will include Audio.
    With older MBP you will need a displayport to HDMI, if you want audio to the actually TV, then you will need to get a cable with either digital out from MBP to the HDMI, or USB audio mixed into the HDMI
    eg
    http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/

  • How to connect my Satellite C650 to TV with HDMI cable?

    Connecting my laptop with my television??
    I have Satelite C650 laptop which isnt that old, but ive connected my laptop to the television using a HDMI cable and it isnt working.
    The television is a samsung 1080p one, i would be grateful for some advice.
    Many thanks
    Claire

    Hello Claire
    I presume you use your notebook with original preinstalled OS that you got with your notebook so it should work without problems.
    Connect your notebook to the TV with HDMI cable. If your TV has several HDMI ports please enable right port on TV and after doing this use FN+F5 key combination to switch from notebook to the TV.
    When you use FN+F5 key combination can you see several options including HDMI option?

  • When connected to lg monitor with hdmi cable i get no sound

    when connected to lg monitor with hdmi cable i get no sound

    The issue here is that HDMI cables, as the name indicates, carry audio signals to the monitor. Therefore if the monitor has no built in speakers then there will be no sound. If you have external speakers you can plug them into the audio out slot on the back of the monitor and the problem will be solved. 
    However, if the screen does have built in speakers you need to go Control Panel>Hardware and Sound>Manage Audio Devices and set either your headphone jack or the screen to be the default device. And then you ca pick which device the sound will play from. Either yourlaptop speakers or whateer speakers are plugged into the laptop or the Monitor and whatever speakers are plugged into the monitor

  • Don't see top bar when connect to TV with HDMI cable

    I connect my mini to TV with HDMI cable and can't see top bar. Did switch all resolutions and still same problem. Any idea?

    Then go to apple>preferences>display and adjust it there

  • I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

    I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

    For the "Arangements" option to appear, the external display must be turned on with the correct input selected and connected to the computer.  Then close system prefs, reopen, go to "Display" and "Arrangement" will be along the top. 

  • I'm trying to watch a movie from my iPad on my tv with Hdmi  cable.  Do I need to do anything to the tv to make this work?

    I'm trying to watch a movie from my iPad on my tv with Hdmi  cable.  Do I need to do anything to the tv to make this work?

    Not really. Using the correct Digital Av adapter and connecting the iPad to the Tv through one of its HDMI ports is all it takes. Of course making sure the correct input is selected in the Video source selection on the TV.

  • Adding second monitor to HP Beats Special Edition 23-n010xt All-in-One with HDMI Cable

    Trying to add a second monitor to all-in-one using HDMI cable.  All-in-one is HP Beats Special 23-n010xt, second monitor is Samsung SyncMaster S24B300, Op Sys is Windows 8.1.  Both are connected with HDMI cable, but Windows is not detecting second monitor.  Have also tried a new cable, no success.  Any suggestions?  Thanks in advance.

    Here are the specs for your HP Beats Special Edition 23-n010xt All-in-One CTO Desktop Computer. Based on the specs, this model doesn't have a video output of any kind. The HDMI port on the side is strictly an INPUT.
    The HDMI input allows you to use your computer screen with a game console or video player. To connect your computer to an external display, you will need to purchase a USB-to-video adapter such as the EVGA UV Plus+ UV39 or many other adapters on the market.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • No audio with HDMI cable connect - need optical cable?

    I have just connected my AppleTV 2 with my Pioneer ELITE 910 HD Plasma TV system.  I have a hard wire ether net connected.  I have a great picture coming out of the HDMI connection from AppleTV plugged into my ELITE 910 HDMI Media Receiver.  But I am not hearing audio.  I have gone through the 'settings' menu on the AppleTV screen and have every setting correct (I believe)   It might appear that I may have to purchase an Optical Digital Audio Cable that would input into my Pioneer ELITE VSX-54TX receiver (that does have an Optical Digital Input that has not been used.)
    Am I on the right track?  I was hoping the video AND audio would travel through the HDMI connection.   I don't want to spend money on the cable if I don't need it.

    Re: No audio with HDMI cable connect - need optical cable?
    Yes, audio and video should go via HDMI.
    Do other peripherals work ok with the pioneer over HDMI.
    My LG BlueRay player works fine.  My TIVO works fine -- good audio and video
    AppleTV is a bit odd with audio at times.
    Does the pioneer media box handle doilby digital and linear PCM?
    I don't know what "linear PCM" is.  All the specs on this 2004 system are here:
    http://plasmatvbuyingguide.com/plasmatv/pioneer-pro910hd.html
    If you have Dolby Digital set to Auto I'd expect you to get some audio - if set to On and media box can't decode DD then you may get no sound.
    Try cycling those settings as well as the one for audoo bit depth.
    Have done all this.  Still no audio

  • Does Apple TV come with HDMI cables?

    I'm looking to buy the Apple TV and wondered if the cables came with it as it don't say.

    No, Apple TV doesn't come with hdmi cable.

  • Do I need a support app to show videos from iPad to HDTV via hdmi cable?

    Do need a support app to play videos from my iPad to a HDTV via hdmi cable?

    No.  The Videos app should work fine.

Maybe you are looking for