Toshiba Encore 2 WT10-A doesn't detect network adapter

Hi, my tablet Toshiba Encore 2 does not detect at all network adapter. Tablet I have since 4 days and I have not had time to fall, hit ..... think something like that powinnienem give it to your warranty? Or is there any solution to this problem

I assume that you are speaking about WiFi issue… is it correct?
Are you not able to connect the tablet to the WiFi network or what’s wrong exactly?
Anyway, first of all you should consider the possibility of software issue.
In case of software problems it’s advisable to set the device to factory settings in order to check if this simple workaround would fix the issue… and to be honest most software related issue can be solved loading the factory settings…
How to recover the tablet?
This is simple: To enter the Recovery Menu you have to push the Volume + button and the Power On button in parallel for several seconds (Unit must be switched Off before). Then choose the last option called “HDD Recovery”

Similar Messages

Toshiba Encore 2 WT10-A264 will not turn on.

hello
first of all i bought new tablet( Toshiba Encore 2 WT10-A264 ) 3 months ago...
3days ago
I had connected tablet into charger at night. and i slept well
In the morning... it wasn't turned on
and it continues untill now....
it doesn't work, it will not turn on....
how can i solve this problem...?
Solved!
Go to Solution.

Press the power button and hold for at least thirty seconds. Then release, wait a few seconds, and press the button again briefly. See if this works.....

Toshiba Encore 2 WT10-A32 crashed - 0xC000021A error

Hello everyone,
I bought a Toshiba Encore 2 WT10-A32 a couple of months ago and just turned it on tonight after some time. When I turned it on, I forgot my password and then it went into some kind of error mode, where it has now stayed for 3 or 4 hours. It says:
"Your PC ran into an error and needs to restart. We're just collecting some error info, and then we'll restart for you". It is just hanging, for hours, saying this on a blue screen.
Below in tiny letters is the code: 0xC000021A
I don't understand why there is no restart button on this machine. I have tried pressing the power and windows buttons over and over with and without the ac adapter. I also tried with and without the mini SD card. At this point I may just have to leave it overnight until it runs down. Any help? Thanks much.

Press and hold the power button until the screen gets darker (may take 30 seconds) then release, wait a few seconds, and restart.
This seems to be the new on-off, press to start, press and hold to turn off. My coffee machine does the same thing.

Toshiba Encore 2 WT10-A-106 not Win8 licence Sticker?

Hello all,
i bought a new tablet "Toshiba Encore 2 WT10-A-106" with has WIn8.1 with Bing included.
But i can only find a Office 356 licence sticker in my package.
No Win 8 licence.
I am asking because i want to upgrade to WIN 10 in the future.
I am thinking about that with no Win8 licence i can not get a Win 10 licence.
So i hope that you can help me in my question where i have to find my win 8 licence sticker.
I am sorry if my english is not good enough.
I am german :-)
Thanks all
With best regards
TheMaster

Hello all,
it is me again.
I found a answer in the Internet, that with Windows 8 no more licences as stickers are available.
With Windows 8 you have to read out the product key from the BIOS with specials Tools.
In my opinion this thread can be closed.
With best regards
TheMaster

Toshiba Encore 2 wt10 and LB1 pen?

Will the LB1 toshiba pen work with the encore 2 wt10?

Press and hold the power button until the screen gets darker (may take 30 seconds) then release, wait a few seconds, and restart.
This seems to be the new on-off, press to start, press and hold to turn off. My coffee machine does the same thing.

Toshiba Encore WT7-C-101 doesn't start

Hello,
a few weeks ago I bought a Toshiba Encore mini and for the past tw weeks it worked just fine. But now it doesnt charge or start and I dont know how to fix it.
Can anyone help me ?

Check your Power supply is working - do any LEDs light up when you connect it? Or use a multimeter to check it's putting out the appropriate voltage etc.
If it isn't - contact warranty support for a new charger
If it is - contact warranty support for a Tablet fix

Will all my drivers be updated if I update to windows 10 on my Toshiba Encore 2 WT10-A 10.1 inch?

If I update to Windows 10 on my Encore 2 will all the drivers be updated if i upgrade to windows 10. the most important drivers i care about are my audio and display drivers.

I have 8" encore 2 running windows 10 and all runs well except for audio. Everything else eicluding display works fine. i have tried everything i've seen online and still get message that no audio device is installed.

L7590- doesn't detect network/ empty network configuration page

Hi,
I baught a new L7590. Installed it according to the instruction + software. The printer was not detected during installation.
Network configuration page in the printer displays empty values- Network status: Offline, IP 0.0.0.0. etc.
I tried to setup an IP manually, but it doesn't help (and it seems that the printer doesn't save my manually entered IP).
Any ideas?
Thanks,
Dror.

Offline with all-zero IP means that you have a bad cable, or a bad connector on the printer, or a bad connector on the router, or any combination of these.
The netgear router should have indicators (usually on the front panel) that illuminates when a LAN connection is made. Check that first. Also, the printer has LED indicators on the LAN connector -- they need to be illuminated showing activity.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Airport doesn't detect network occasionally

I have an older macbook(2.2GHz Intel Core 2 Duo, Build 9J61) which I just bought last year which occasionally does not not detect my usual preferred network. This happens usually after I put the macbook to sleep. I then have to reset my router or restart my macbook to solve the issue. This often gets frustration as doing the following is very time consuming and resetting the router often annoys my roommates. Is there another way to solve this?

When the network isn't detected, have you tried simply turning AirPort off and then back on via the AirPort menu bar icon?
That works when it sporadically happens to me.

Camera problem with Encore 2 WT10

I purchased a new Encore 2 WT10 recently. Both cameras are workign fine until I install the auto windows updates. The images from both cameras now are very dark and not focused. I've tried to uninstall these updats but failed to get the camera properly again. Is there any solution to fixed this issue?
Many thanks.
Bill

Encore WT10-A32 -- downloads here
Maybe that model? Check the label on the bottom.
Try a System Restore. (It will only affect installations since the restore point.)
Control Panel > System > System protection > System Restore button
Don't accept updates to drivers from Windows Update. Unless you really know what you're doing, always get them from Toshiba. OEMs sometimes tweak the chips and drivers.
-Jerry

Encore 2 WT10 - touch screen works poorly

Sometimes the touch screen does not work, or works poorly, as did replacement of the system, and continues. When it crashes I have to suspend the tablet and wait a bit, sometimes I have to play many times to select what I want. Anyone know what it could be?
T have a Toshiba Encore 2 WT10

You said; you have already changed the system.
What did you change? The ENCORE 2 WT10-A-102 was preinstalled with Win 8.1 OS.
Furthermore I guess that the described issue is related to busy OS.
Probably too many applications (apps) as well as processes run in the background and this might lead to short few dropouts or performance problems.

Demand !!! Toshiba Please release 64bit Support for Toshiba Encore WT8-A32

Toshiba Please Please Release Support for 64bit for Toshiba Encore WT8-A32 as this device hardware supports 64bit
http://www.toshiba.com/us/tablets/encore/8/BWT8-A32
as details Provided on Intel's official page
http://ark.intel.com/products/76759/Intel-Atom-Processor-Z3740-2M-Cache-up-to-1_86-GHz
Intel® Atom® Processor Z3740 supports 64bit also, then please release 64bit Support
While other devices having same hardware supports 64Bit then why shouldn't Encore too?

... I found an Win10 Intel platform driver v1.14 on the Lenovo website for the Thinkpad 10 tablet. Doesn't look as a dedicated Win 10 driver to me as it was already released as an WIn 8.1 driver before. This works pretty nice with the Encore as the hardware components are very similar. I removed the audio and GFX section out of the config file before starting the setup procedure as I do not want to overwrite the Dolby audio driver from Toshiba and the already installed Win10 graphics driver I found on the downloadcenter.intel.com website. Everything works nice and without any problems. Nevertheless, I wouldn't recomment this approach for the standard users out there. You need to know what you ar doing with this driver-mixture I'm pretty sure that Toshiba will release an updated platform driver pretty soon - but I don't expect significant improvements to my current configuration ... Bernd

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

How can I print from iPad to a Brother printer with a TP-link tl-wps510u connected to it without using a computer? It doesn't detect the printer.

I have a Brother printer that doesn't have wifi, but I bought a Wireless Server Print to connect to it. I want the iPad can print directly to the printer without using a computer, but the iPad doesn't detect the printer. Is that possible?

javigomez88 wrote:
I know that Brother has an app that works with its wireless printers, even if they are not airprint. My printer isn't wireless, is a wireless print server attached to the printer what is able to make this printer wireless. Could this app be a solution or only would work with the wireless Brother printers?
The Apps usually only work with wireless printers, though if its free, there is no harm in trying, and see if it gets picked up, but its doubtful, as the print server would need to transmit in the same protocol the Brother Print App is expecting from the supported wireless printers.

HT5167 after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

Toshiba Encore 2 WT10-A doesn't detect network adapter

Similar Messages

Maybe you are looking for