Toshiba Encore mini on sale tomorrow. Should I get that or HP Stream 7?

I've just noticed that the Toshiba Encore mini is on sale tomorrow, and I doubt it will ever get cheaper than $79, and it's also bundled with a 16 GB micro SD card: http://tabletmonkeys.com/toshiba-encore-mini-december-sales-79-free-microsd-card/
Does anyone have any experience with comparing the Encore mini to the HP Stream 7? I've wanted the Encore for a long time, but the Stream 7 is also interesting. But at the forums there I keep reading about the faults it has. It even has a hissing noise when the headphones are used. Just weird.
It would be great if someone had experience with both these tablets and knew which one was the most problem free.
TIA

mine didnt come with a SD card or a wall charger -_- idk about u but when every thing is done and updated u'll have around 800-900MD free on the onbored SSD. but all in all its a good tablet (as of right now) i'm only get around 4 hours or so. but im still happy with it,

Similar Messages

What is the FCCID on Toshiba Encore mini WT7-C16

as title...
I can't find it on manual...

this support site sucks and supportless
the **bleep**ing FCCID is on the Machine but nobody answers me
wifi frequency and wifi output
YOU'RE WELCOME

Sales order should not get saved without entering the material

Sales order is getting saved without entering the material. How to make material entry mandatory in sales order.. so that if i try to save the sales order without entering the material the system should create an error.
Please give a clue, if there is any way other than incompletion log.

Dear DV,
T. Code: SHD0
Create a Screen Variant for Transaction VA01
and maintain Field: Material as "Mandatory".
Best Reagrds,
Amit
Note: Following is the explaination with Incompletion-Procedure -
T. Code: OVA2 - Incompletion Log
Select Group: B - Sales Order Item; and Double Click "Procedures" (left-hand Dialog-Structure)
Select InCompletion Procedure: 20 - Standard; and double click "Fields" (left-hand Dialog-Structure)
Here, Maintain entry:
Table: VBAP
Field: MATNR
Screen: PKAU
Status: 4
Imp.: Create Z-Incompletion Procedure and make necessary changes, instead of changing a Standard one.
Alternatively, check with Arijeet's post in following thread:
How to restrict saving of a sales order without a material.

Toshiba Encore WT7-C-101 doesn't start

Hello,
a few weeks ago I bought a Toshiba Encore mini and for the past tw weeks it worked just fine. But now it doesnt charge or start and I dont know how to fix it.
Can anyone help me ?

Check your Power supply is working - do any LEDs light up when you connect it? Or use a multimeter to check it's putting out the appropriate voltage etc.
If it isn't - contact warranty support for a new charger
If it is - contact warranty support for a Tablet fix

Encore Mini 7" won't turn on or charge

I got this Toshiba Encore Mini 7" and I opend it as a Christmas present. When I unwrapped it I opened it tried turning it on it didn't so I decided to charge it I waited for like 3 hours and didn't turn on. Any suggestions? Thank you

Well I never saw anything like this before (from WT7 Quick Start):"USB Charge – In “sleep or shutdown mode,” you can charge your tablet byconnecting the USB power cable to your tablet and the USB port on yourcomputer. Please make sure your computer is turned ON while charging viaUSB. If your computer is turned OFF, depending on computer specifications,the tablet battery may discharge. We recommend that you do not use yourtablet while charging via USB as auto shutdown may occur if the batterycharge is too low." From User's Guide:"Power button—Turns the device on and off. Press and hold the button for several seconds to turn the deviceON/OFF. Press the button quickly to wake the device from Sleep mode or to place it into Sleep mode."

Toshiba Encore 2 WT10-A doesn't detect network adapter

Hi, my tablet Toshiba Encore 2 does not detect at all network adapter. Tablet I have since 4 days and I have not had time to fall, hit ..... think something like that powinnienem give it to your warranty? Or is there any solution to this problem

I assume that you are speaking about WiFi issue… is it correct?
Are you not able to connect the tablet to the WiFi network or what’s wrong exactly?
Anyway, first of all you should consider the possibility of software issue.
In case of software problems it’s advisable to set the device to factory settings in order to check if this simple workaround would fix the issue… and to be honest most software related issue can be solved loading the factory settings…
How to recover the tablet?
This is simple: To enter the Recovery Menu you have to push the Volume + button and the Power On button in parallel for several seconds (Unit must be switched Off before). Then choose the last option called “HDD Recovery”

Encore Mini WT7-C-100 - how to delete recovery partition

Hi all,
I own an Encore Mini WT7-C-100 tablet with only 16GB storage.
After following all possible and existing solutions and recomendations in order to free up storage, free space on C: is limited to barely 500MB.
On the other hand, I noticed that the resovery partitiobn is almost 3GB large.
Though it seems that there is no way to remove this partition and extend C: in order to gain more disk space (3,5GB would be more than enough for me). Right clicking on this partition in Disk Management displays no avaliable actions (except "Help").
Please notice that I have already created a copy of the recovery partion on a USB drive (various posts in various forums indicated that Windows, after finishing with the copy on the USB, would propose for deleting the recovery parition but not such thing happened).
Please advice how to delete the recovery partition or for other actions in order to free up disk space in C:
George
Athens, Greece

Try to start the recovery using the HDD recovery procedure.
If you want to access the boot menu on please press and hold the "Vol+" button and turn on the device pressing power button.
After a few seconds the boot option menu will appear.
Then select "HDD Recovery" and the rest of the procedure is similar to the Windows 8 recovery process you can find here:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
If this doesn’t help, try to recover the Toshiba WT8 / Encore tablet from a created recovery media
http://aps2.toshiba-tro.de/kb0/HTD4103K90000R01.htm
If you don't have the recovery media, you could order this here:
http://backupmedia.toshiba.eu
I keep the finger crossed for you...

Toshiba Encore 2 WT10-A32 crashed - 0xC000021A error

Hello everyone,
I bought a Toshiba Encore 2 WT10-A32 a couple of months ago and just turned it on tonight after some time. When I turned it on, I forgot my password and then it went into some kind of error mode, where it has now stayed for 3 or 4 hours. It says:
"Your PC ran into an error and needs to restart. We're just collecting some error info, and then we'll restart for you". It is just hanging, for hours, saying this on a blue screen.
Below in tiny letters is the code: 0xC000021A
I don't understand why there is no restart button on this machine. I have tried pressing the power and windows buttons over and over with and without the ac adapter. I also tried with and without the mini SD card. At this point I may just have to leave it overnight until it runs down. Any help? Thanks much.

Press and hold the power button until the screen gets darker (may take 30 seconds) then release, wait a few seconds, and restart.
This seems to be the new on-off, press to start, press and hold to turn off. My coffee machine does the same thing.

Which mac mini should I get to setup osx server

Hello!
I run a small development team though we are fairly new at working together and we're trying to setup an efficient development environment for us. I've recently stumbled on to 'continuous integration' and had heard that a Mac Mini server can go a long way toward reaching that goal.
Keep in mind, though we're iOS developers and are technologically competent, none of us have server admin experience.
Unfortunately the latest update to Mac Mini does not have a server model. That leads me to the following questions:
1) Should I purchase an older mac mini that is already setup as a server? (aka, Mac mIni server)
2) Should I purchase one of the newer models and install OSX Server myself? I heard it's cheap off the Mac App store, so price is not a concern, but I'm not sure what the tradeoffs are of getting one that is already a supposed server, and setting one up myself as a server.
3) If I do purchase one of the three newer models, how do I know which one I need to support our environment? Lower cost is obviously better, but I don't want to short change ourselves on the required power. We would use the server mostly for file sharing, collaborating, code repos, CI, etc. We have a website that we host on Godaddy and I would move it to our server if I could, but this is low on the priority list.
I'm also open to options such as, do none of the above and wait for a new Mac mini server model to come out, but I'm anxious and want to get started
Thanks so much for your help and advice!
Frankie

A server model is NOTHING but a 2nd 2.5" HD and the OSX Server APP
buy a quad core mini (on sale now at best buy), and purchase a 1TB Hitachi ($65) 7200RPM HD off ebay
and purchase the server APP from the APP STORE.
OR, just find a new or used server model 2012 Mini
dont even think about fooling with the new 2014 Mini. Lost cause.
I use godaddy as well, and ergo have NO need for a Mini server, even though I own 4 Mac Minis.
godaddy is cheaper and easier ......you should possibly consider the same

Sales office and sales group should greyed out..

Hi All,
I have a requirement here where the sales office and sales group in sales order should greyed out once billing is done for the sales order.
Kinldy suggest how can we achieve this.
Thanks,
Pavan.

You can use program MV45AFZZ and USEREXIT_FIELD_MODIFICATION
more information is here.
https://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm

Encore Mini - How to set up to utilize SD card in support of internal drive

I have a WT7-C16MS. I have a 32 GB SD card in the unit which I want to use to help out the 80% full 16 GB internal drive. How can I configure the Encore Mini to best use this card to prevent overload of the internal drive?
Solved!
Go to Solution.

This thread may be of interest.
Installing Office 2013 Home & Student to SD drive
-Jerry

I would like to create a document with imbedded video, to email, and airdrop to an iPad mini. What program should I use?

I would like to create a document with imbedded video, to email, and airdrop to an iPad mini. What program should I use?

Thank you for using the Apple Support Communities
I would suggest using Apple's Pages which allows support for imbedding videos from the device's camera roll. Pages also allows for sharing via email, Air Drop, and Messages.

Toshiba Mac mini

What is the best setting for screen resolution clarity on my TV and Mac mini.
TV = toshiba 32c100u

1366 X 768 is the max resolution of that model, so set it to that.
Seriously though, you'd do better with a 23" monitor that'll handle 1920 x 1080.

Define shipping data for plants / multiple sales areas should be assigned f

Dear All ,
Appreciate of you helped me in this:
I am trying to configure the intercompany STO process, when I reached the step of u201CDefine shipping data for plants u201C I found that the issuing plant is already assigned to sales Area ( 2000 , 60 , 10 ) which represent local sales , but I need to assign the sales area ( 2001 , 60 , 10 ) which represent foreign sales.
Both sales areas should be used because we are doing STOs with a local company here in jordan and another one in Algeria , so Is there any way to have both sales areas assigned for the same issuing plant?
Thanks ,
Malik

Hi Malik,
I am afraid this is impossible in SAP standard. For this purpose you have the BAdI ME_PROCESS_PO_CUST. The method PROCESS_ITEM of this BAdI gets one single parameter, IM_ITEM, which is the pointer to the PO item object. This object has a lot of useful methods, among them:
- GET_SHIPPING_DATA gives you the Shipping tab of the PO item derived by SAP, among them the ship-to number
- SET_SHIPPING_DATA allows you to amend the data on the Shipping tab
Let your ABAPer implement the BAdI and program its method PROCESS_ITEM.
BR
Raf

Sales order should get block if XYZ payment terms is used

Dear Expert,
The requirement is like,
If user add payment term XYZ manually in salse order then that sales order should get block for review purpose.
Note:
if user add that payment term in sales order client want that order should block no matter what reason , here client not concern about credit limit and any outstanding from customer side ,
Thanks in advance
hanumant

Hi,
You need to block orders with payment terms XYZ, or only when user changes from ABC to XYZ??
If first one is your requirment, you can do with userexit - USEREXIT_SAVE_DOCUMENT, and you need to create status profile for sales document type and assign to order type, in status profile put status AUTO - automatically approved, LOCK - when XYZ is payments terms it wil not and not create delivery & REJC- Rejected, when approver dont want to approve he can reject.
In sales order userexit you need write logic when paytemnt terms is XYZ then put status as LOCK.
New repor need to create to approve LOCKed orders so that user execute and approves or rejects.
If only user change to XYZ, then you need to write logic in prepare userexit, but it will be tricy, need to store values in tempapory memory, ceck with abaper,

Toshiba Encore mini on sale tomorrow. Should I get that or HP Stream 7?

Similar Messages

Maybe you are looking for