Toshiba L505D-ES50​25 Microphone​, Sound , Webcam and Usb ports not working

Title says all, i also dont have any usb port tree in my device manager

For the sound go search in your start menu sound and click manage try the same for mic you may haft to configure it if not go to device drives ( sane for ports) you either haft to enable or ad drives if that does not work shut down your computer we'll starting it up press f8 and and select repair computer if it doesn't work you will haft to repeat the sand process except don't click repair click open the partition and follow the instruction when it ask you put it to out of box state

Similar Messages

  • Touchsmart TX-2 fingerprint scanner and USB ports not working

    Hi everyone,
    Please forgive me if this is in the wrong spot.
    Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
    I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
    All advice really welcome and very much appreciated!
    Thanks in advance

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

    I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work. 
    I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
    I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
    The drivers that are not working on Windows 7 32 bit are:
    Realteck RTL8188EE 802-11b/gn witeless lan
    Realteck ethnet die and
    Intel High definition graphcs driver 
    Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
    So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
    This question was solved.
    View Solution.

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • Webcam and usb drive not working--possible hardware issue?

    Hello,
    I recently purchased a Lenovo ideapad U510 with Windows 8. I bought it as a returned machine but the Staples employee didn't know why it had been returned and thought it was just because the buyer didn't like Windows 8. When I first set it up I kept getting an error message that my usb device was not recognized, even though I had never plugged anything in. As I was leaving the country, I dismissed the issue and decided to deal w/ it when I returned to the US, since my other usb drives worked fine.
    However, later my integrated webcam stopped working as well. It worked one time when I used Skype but not after that. I checked online forums for possible solutions, and most said I needed to download an updated driver. I didn't think this was the issue b/c when I went to device manager and tried to update my driver for the easycam, it said I already had the most up-to-date driver. I have uninstalled drivers, downloaded and re-installed drivers, and even refreshed my computer, all to no avail.
    Here are the error messages I receive:
    In device manager>view>show hidden devices>imaging devices>Lenovo EasyCamera, device status says
    Currently, this hardware device is not connected to the computer. (Code 45)
    To fix this problem, reconnect this hardware device to the computer.
    When I try to run the Bison setup: Lenovo EasyCam has not found! 
    When I try to run the Chicony setup: Setup failed! Please Plugin camera and install driver again!
    So, I'm thinking it's not a driver issue, but I'm not a techie and don't know what else it could be. Wondering if the usb problem and webcam problem are connected. Found another forum post that said maybe the webcam is not connected to the motherboard...suggestions?
    Thank you in advance for your help.

    I am certain it is a hardware issue from the problems youre describing. I would contact Lenovo. They may try to have you purchase their "software" support, but don't let them. I had wifi issues and they tried to make me spend $90 because I was too lazy to figure it out on my own.
    Make sure when you're calling support that you tell them that you restored to factory default and before you send your computer in, back up your data. Also tell them that it's a new computer and you do not want to pay for shipping... They will most likely comp you shipping in both directions.

  • HPDV6 6c04sa - HP truevision HD camea and usb ports not working

    My camera is not working - there appear to be no drivers for it through the website for re-installing, and none in HP recovery and the copies of the original drivers loaded on the computer.  Cyerlink you cam does not install a driver.
    How am I expected to be able to re-instal a driver when there is not driver for it?
    Secondly, there is no information on the camera provided in the laptop.
    USB ports on the left hand side are not working.
    Finally - there is a mysterious Q drive which also appears not to function.
    Running Windows 7 64 bit.

    bump
    Is the HP TrueVision HD internal webcam usb based?

  • Esata Port and USB Ports Not working

    My USB ports have not been working for a long time. They will charge my phone, but windows doesnt pick them up nor any other device I connect via any of the USB ports. I recently took my computer into a shop to have them fix a wire that had come undone
    and asked them to look at my USB ports and figure out why they werent working. When I got it back they told me the USB ports were connected to the motherboard and to get them to work they would need to replace the motherboard. They said however that the Esata
    port worked and I asked them if I could use that to connect my USB from my iPhone in order to connect to itunes. They said with an adapter it should work. So I bought the adapter and of course when I connect the USB in to it, the computer wont recognize the
    device. I even tried connecting the USB directly into the Esata port and still nothing, but it will charge the phone, just not recognize it. 
    Any advice would be much appreciated.
    The computer is a Dell Inspiron N7010 running Windows 7

    Hi,
    Obviously, you can't connect USB directly into Esata port, for they are not compatible.
    Attempt to install your phone usb driver and then check if it works.
    If not, it should be related to your adater, not all adapters support data transfer.
    Andy Altmann
    TechNet Community Support

  • I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?, I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?

    I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
    Thanks

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?

    My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
    Thanks

    Have you updated iTunes with the absolute latest software?  If you have not in a long time, your iPad won't be recognized.

  • My usb port not work and hot usb port aria please help me

    my usb port not work and hot usb port aria please help me

    Hi
    Please find the link givenbelow might help you to fix your issue.
    USB Device Troubleshooting
    Fix Windows 7 “USB Device Not Recognized” Error
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • MSI GAMING 5 - ALL USB ports not working

    hello
    how are you every one 
    i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
    Mouse and keyborad work in bios but if the system run don't work ! and trun off
    and all usb devices
    in safe mod work 
    rellay i don't know where is the problem !
    CPU : Intel Core i5-4690K
    M.B : MSI Z97 GAMING 5
    RAM : G.Skill Ripjaws X 8GB DDR3 Kit
    GPU : Gigabyte GeForce GTX 970 G1 GAMING
    SSD:Corsair force LX 256 GB
    HARD: Seagate Barracuda 1 T.B 7200 RPM
    CPU COOLER : Cooler Master Hyper 212 Evo
    PSU : Cooler Master GM-Series 750 watt
    CASE : NZXT Phantom 410
     Thank you

    Quote from: Nichrome on 28-January-15, 00:18:47
    Hi,
    What about if you try to install drivers from your product's page?
    http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
    And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
    thank you
    i just remove USB3 controller driver and work 
    thank you all :D

  • Sound, Restarting and Email Msgs not working

    Recently I have had problems where the sound just stops working.  The profiles are not changing and it works for awhile, but then I start to notice the red light flashing and no sound.  The only way to get it back is to do a hard reset (I've found).
    Also, my phone decides to restart a lot . . . why and how do I get it to stop?
    This morning, going into my messages folder where all my notifications go, I can click on any type of notification to see it, except for the email messages.  I click and it just does nothing.  I've already tried reseting and this has not worked.
    Please help!

    It's ok, I fixed it.
    I got an iPhone 5. Bravo to apple for making me buy another one of their products.

  • Wifi hot spot and USB tethering not working

    I updated my both Lenovo a 7000a phones to Bulid Number A7000-a_S144_150721_ROW  today,  Since then both of my phones stopped Wi Fi Tethering and USB Tethering.Base Band Version A7000.ROW.V15,2015/07/21 20.44I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.Please comment for a solution!

    I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.

  • V570 - USB Ports Not Working

    Please forgive me if I posted this in the wrong section! First thread!
    Recently, three out of four of my USB ports decided to stop working. The one USB port that works is a USB 2.0 port that is located between the microphone jack and the DVD drive. There is also a eSATA / USB combo port. The eSATA portion works fine, but the USB does not work. At first I suspected that the USB controller was probably starting to fail. I don't understand why all but one USB port functions properly. 
    I have tried reinstalling the chipset drivers, updated my BIOS, and I tried to see if the ports are recongized in Linux. None of those work. I also checked the ports to make sure there are no bent pins. My warranty period just ended so I was wondering what I can do now. I don't mind opening up the computer, as long as I know what to look for.
    Thanks in advance!

    hi idaggerpwn,
    The USB board must be bad. Try to re-seat the cable from the USB board to the motherboard and check. If this doesn't work, check if the USB ports are somehow disconnected to the PCB. If they are, you will need to hire an a technician with board level soldering skills to reconnect them or you can contact lenovo for service to replace this part. (fees may apply)
    Check page 78 (see #10) of the hardware maintenance manual (HMM) for the USB board location. To access the USB board see page 53 of the HMM.
    Best regards,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • USB ports not working in safe mode

    I am trying to back up my computer before i take it to the apple store and i cant back up in safe mode using time machine, becuase im guess the USB ports arent working. Are there any solutions to this problem?

    Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck.  Should I just give up and go to Windows 8.1?  I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc.  I've spent two hours on this so far and it's getting out of control.  Why doesn't this work with generic USB drivers?

  • G72-a40SA usb port not working

    Hi
    can anyone help me please?
    I have a HP G72-a40SA laptop running windows 7.
    The bios has been updated to the latest version.
    BUT, i cannot get one (out of three) usb ports to work. Its NOT being recognised by the PC.
    I have tried everything possible...... can anyone help me on this please...???
    Thanks

    It is only a piece a equipment; any part can break at any time. You may want to contact HP technical support and identify your options. These options will be based on your warranty status, and you can locate that information here: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1383763792097.876444892.199480...
    Please call the number, closest to your region, which you can locate here: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Let me know if you have any further questions or concerns.
    Mario
    I worked on behalf of HP.

Maybe you are looking for