Toshiba L55-A5226 Touchpad Randomly Stopped Working

I used a external mouse before this happened so I noticed it probably a week after it occurred. I tried going into the synaptics driver but it no longer showed up in the mouse menu. I have uninstalled and reinstalled the latest touchpad drivers (more than 10 times) but whenever I open mouse properties after a fresh install it says Unable to connect to the synpatics pointing driver and asks me to uninstall it or not. The touchpad does not show up in device manager either only HID compliant mouse shows up. I have also tried FN + F5 (the f key with the mouse symbol on it) and it has not worked either. I have also downloaded the newest motherboard driver to no avail. I'm starting to think the ribbon connecting the touchpad to the motherboard has loosened or whatever but I hope not. Also the latest driver for my laptop is from mid 2013, I recall seeing one from 2015 but I can't seem to find it again, if someone can I would appreciate it greatly. *Update: I refreshed the computer without affecting files in hopes of it automatically downloading but that didn't workout either. PART NO. PSKLAU-01200E

Sorry I think I posted this in the wrong place. I reposted in the keyboard and touchpad section of the forums.

Similar Messages

Touchpad randomly stops working and I need to disable/enable it in driver settings

My mouse touchpad sometimes (very often, actually) just stops working completely (no mouse movements, no clicks etc.), it's just completely dead, even both click buttons. What I then need to do in order to temporarily fix it is to go Synaptics Pointing Device (this window) and click "disable" and then "enable". This appearently re-enables my touchpad and everything works again for a while. This is becoming a big issue for me. If I don't have a external mouse present, the only way to fix the problem is to restart my laptop. I do have the right drivers installed. Latest version and windows 8.1 drivers. I even updated them with HP Support Assistant to make sure. And I also tried downloading them from here (Synaptics Mouse Driver version 18.1.24.4). Also, this happens completely randomly. Sometimes after 10min of usage, sometimes after a few hours. Also, I am not the one accidentaly disabling it (there is no orange light). Sometimes it even happens that the drivers aren't loaded when laptop turns on, so touchpad isn't working from the start and there's no way to enable it. So I need to restart laptop. How can I fix this?

I have. Multiple times. I even tried installing some older version drivers to see if it works. Currently, I can't get my touchpad to work at all. I'm using my external mouse. I restarted the laptop multiple times and there is no Synaptics icon in the taskbar and touchpad + both buttons are completely unresponsive.

Satellite C series - Touchpad has stopped working running Windows 8

Hi
I dont know if anyone can help.
My touchpad has stopped working.
At first it would only work on the login page. Now its not there at all.
I have only had my Toshiba C for a few days and its the first time I have used Windows 8.
I have tried F5 and I have tried going onto BIOS using F2 when booting but that wont come up.
Help plz

Hi
Please check this Toshiba document:
+How to change the Synaptics touchpad settings in Windows 8?+
http://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm
Be sure that the required touchpad settings are enabled!

HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working

Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

USB Ports Randomly Stop Working

I have an HP Pavilion dv6 Notebook with Windows 7. All of the ports, 2 2.0 and 2 3.0 ports, began to randomly stop working. My mouse light would still light up, but the mouse wouldn't work. If I rebooted the entire laptop, all of the ports would come back on for a short period of time before they randomly shut off again. They will also come back on for a short period of time if I close the lid for a few seconds and reopen it. However, lately, the 3.0 ports have stopped working entirely and the 2.0 ports stopping is becoming more frequent.
The first time I noticed this was when I was testing a micro usb cable (it has stopped charging and I was testing whether it was the cable or the wall adapter). I plugged the cable into one of the 2.0 ports and it gave me a USB surge warning. Other than that, I haven't received any notices. The drivers are up to date. I have uninstalld the root hubs multiple times. I have tried all kinds of Power plans for the laptop. Nothing works. The USB ports still stop working, and it's becoming increasingly more frustrating.

Hello Abby_Renee,
With the USB 3.0 port not working, and your 2.0 port working intermittently, I would suggest the following document Troubleshooting USB Connections (Windows 7) for troubleshooting.
In this document there is a specific option for USB 3.0 ports stop working, which would be the best steps to follow for your 3.0 ports. Now for the 2.0 ports, I would suggest USB device not detected by Windows (no device name in device manager), or the other option is USB devices are detected by Windows but are not working properly. The last two options are dependant on the specific errors you are experiencing.
Please let me know the outcome of the troubleshooting steps.
Good Luck!
I worked on behalf of HP

External Speakers Randomly Stop Working until I "Test" or Disable/Enable

I'm using a HP Pavillion DV6 Notebook PC Running Windows 7 Professional 64-bit SP1.
External speakers randomly stop working until I "test" or disable/enable them. Headphone/HDMI Audio Works.
Background
-Recently had to do a clean install of windows.
-Went to the HP Drivers Website and downloaded all of the latest drivers.
-I installed several other programs as well (Flash, Steam, Media Player, Browser)
-The problem started
Current Settings
-My deafult device is "Speakers and Headphones: IDT High Definition Audio CODEC"
-Enhancements are disabled
-Bass and Treble are set to 4
-Format is set to 16 bit, 48000 Hz (DVD Quality)
-Allowing applications to take exclusive control of the device or not doesn't make a difference (but it's currently off)
Troubleshooting
-The audio works by plugging in headphones or using an HDMI device
-The audio comes back if I go to my sound settings and hit "Test", or if I disable and re-enable the device
Error Messages
-Youtube starts the video for 3 seconds, restarts and sputters a bit, and then says that there was an error
-My media player (MusicBee) gives me this message: "Unable to start playback (Error = BASS_ERROR_BUFLOST)"
That's everything I can think of. Any ideas?

Hi TheBigBoy,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having a frustrating time with the sound to your external speakers. Have you tried connecting the speakers to another computer to see if is a hardware issue with the speakers? Do the regular speakers work? What is your product number as there are several models in the dv6 series?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Integrated microphone randomly stops working

Hi I have a problem with my integrated mic. It just randomly stops working.
It was working fine until a few weeks ago. Then one day suddenly it didnt work. and itl randomly start working again.
One way that it got fixed one time was when i plugged in an external mic i borrowed from a friend and unplugged. after that my integrated mic started working again. the next day it stopped working again.
I have tried everything possible to try and fix it.
- Went to sound disabled/enabled it.
- uninstalled/reinstalled the drivers.
- installed other drivers such as realtek
- used the windows microphone troubleshoot.
- tried configuring the microphone.
- even tried system restore, but i only had like 2 restore points since my laptop is relatively new
Nothing has worked. Can someone please come up with an actual solution to my problem?
My laptop is a dv6-6c50us with windows 7 64bit home premium.
And the sound that my laptop uses is IDT high definition codec.
I strongly appreciate any help i can get with this problem.

Hello relgreg,
Take a look at the troubleshooting steps here and let me know if they help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Ethernet Port randomly stopped working - u310 ultrabook

Hi,
So my Ethernet Port on the u310 Ideapad has randomly stopped working - by that I mean that when I plug in my LAN wire, the lights will show only when I switch on my laptop, till the Windows logo comes on, which is when the lights of the port go off and the port refuses to work.
I need LAN pretty urgently, so I was wondering if someone could please help me out! Thanks!

Hi Ipsh,
thanks for posting and welcome to the community. Based from your post there is apossibility that it it could be hardware. But however before we confirm let just trya few setting and software adjustment first. At this point I was just wondering if you have tried doing a software update, I would suggest you to uninstall the current drivers you have now and reinstall the drivers below.
http://download.lenovo.com/consumer/mobiles/0wla01ww.exe
Please be informed that the driver above is meant for windows 7, if you have another operating system installed do let me know.
Regards

ADOBE PREMIERE ELEMENTS 7.0: CLONE STAMP RANDOMLY STOPPED WORKING A WEEK AGO.

I HAVE THE SAME PROBLEM AS HERE: http://forums.adobe.com/message/2211084
It would mean A LOT TO ME IF anyone HELPED ME. I HAVE THIS SAME EXACT PROBLEM RIGHT NOW AS THAT LINK, EXCEPT MINE IS ONLY THE CLONE STAMP.
I use a Windows Vista and use Adobe Premiere Elements 7.0 on it.
I have the same exact problem now, the clone stamp randomly stopped working, a week ago. I tried resetting, doing everything else you can think
of and its just not working. Now I also tried doing that trick on that link that helped that person, but since I have a windows vista I am so lost and
don't know how to get to those settings or where to go. Anyone know anything about how to help fix mine, please reply to me. It would mean so much
to me. What also makes me sad is that I misplaced my cd-rom to uninstall and re-install, thats why I want to get through this naturally and try to fix it without re-installing it and stuff. Please help me.

I read the other post. I wasn't sure from your post if you were able to reset the preference files or not. (I wasn't sure if you ever got the reset dialog.)
Reset application preference files: When you click the Editor launch icon, press and hold in the ctrl + shift + alt keys. Do not release these three keys. A dialog box will come up saying something like "Delete Photoshop Elements settings file?" After this dialog comes up, you can release those three keys. Click OK to accept.
See if that works.
If the above, did not work...
Did you just install a program right before this started happening? If so, that program might be "stealing" the alt key. See this article:
http://kb2.adobe.com/cps/328/328718.html

Sound randomly stops working in Windows 8

I have a new HP PC and the sound randomly stops working. When the sound stops, it stops in all applications: iTunes, Web Browser, etc.
PC DETAILS:
HP Omni 27 all-in-one desktop
Windows 8 Pro
In Device Manager, under Sound, this is what I have:
- AVerMedia H334 MiniCard Hybrid ATSC/QAM
- Bluetooth Audio Device
- IDT High Definition Audio CODEC
I just set up this new pc this week and I have run all the windows and drivers updates so everything is up to date.
When I boot up the pc, the sound works fine for a while and then randomly stops working. For example, if I play music in iTunes 11, the latest version, it may play for 1 minute or it may play for 10 minutes and then it just randomly stops playing sound and the sound will not come back until I reboot and the same thing happens all over again.
I have searched this online and I found quite a few people posting similar sound issues with Windows 8, but I have not found a fix for this problem yet. Any help would be greatly appreciated.

Warlock57 wrote:
online troubleshooter shows it as enabled & not installed.
I do not understand that; if it's not installed, it cannot possibly be enabled.
Make sure ActiveX Filtering is disabled.

Cs6 hotkeys randomly stop working

Why do the hotkeys randomly stop working???
Simple ones, like the move tool or the marquee tool.
The only fix i've found is having to CLICK on the tool and then the hotkeys will work again...it's really annoying - never happened in cs5...

There's really nothing in cs6 that makes it worthwhile to switch - and certainily not worth paying an arm and a leg for the "cloud"...biggest scam ever to make more cash.
Well, I certainly share a dislike of the Cloud License.
But »Liquify as a Smart Filter« seems tempting to me.
And while in my opinion »Blur Gallery as a Smart Filter« should have been the way to introduce it, it finally being that way in 13.1 also seems interesting.
Also, I use cs5 daily, and have used photoshop since version "7"...
That does not seem likely to impress many people here. (edited)
my boss keeps asking me if we should upgrade the company from cs5.5...
It is certainly up to you to assess which of the new features are worthwhile to you (and your colleagues).
But what you call »retarded issues« may be actual bugs or user errors or the consequence of lacking system-maintainenace or hardware related or …
There is no way to tell without more information.
Edit: Please not that I am not an Adobe employee.

Audio randomly stopped working

The sound on my computer randomly stopped working yesterday. I think it happened when I installed wine, but I'm not sure...I use alsa and it worked before. I tried rebooting a few times and reinstalling alsa, which didn't help. I did unmute in alsamixer, so that should be ok. From lspci:
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
I don't know what other information is necessary, so please tell me what other info would help figure out the problem. I don't see how wine would affect the audio as I had it installed before and the sound worked, I uninstalled for a while to attempt to get rid of left over menu items of uninstalled Windows programs which didnt work but thats not really a problem. I installed Wine again and I have problems this time. I've tried to get sound from my laptop speakers and headphones and through audacious and youtube, and nothing worked. I looked at the alsa page on the wiki, under https://wiki.archlinux.org/index.php/Al … on_Startup but that is only for people who have multiple sound cards, which I don't (as far as I know lol). Audio is fairly important for me (not vital but still... ) so please help. I probably didn't supply enough information, so tell me if there are any log files I should post or something. I looked through /var/log but didn't see any files looked like they would have something to do with sound/alsa. Thanks

Tux the penguin wrote:
oss kind of works, but not entirely. When I run osstest, I get this:
Sound subsystem and version: OSS 4.2 (b 2004/201101052228) (0x00040100)
Platform: Linux/x86_64 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 09:24:47 CEST 2011
*** Scanning sound adapter #-1 ***
/dev/oss/oss_hdaudio0/pcm0 (audio engine 0): HD Audio play front
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47989.00 Hz (-0.02%)>
/dev/oss/oss_hdaudio0/pcm1 (audio engine 1): HD Audio play center/LFE
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47991.00 Hz (-0.02%)>
/dev/oss/oss_hdaudio0/spdout0 (audio engine 2): HD Audio play spdifout
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47991.00 Hz (-0.02%)>
/dev/oss/oss_hdaudio0/pcmin0 (audio engine 3): HD Audio rec mix
- Skipping input only device
/dev/oss/oss_hdaudio0/pcmin1 (audio engine 4): HD Audio rec mix
- Skipping input only device
*** All tests completed OK ***
No errors, but only the first test, pcm0 worked. Everything else only gave silence. That didn't help really because audacious/youtube doesnt play either. So I guess it isn't alsa specifice, and therefore isn't wine's fault. (I think?)
It is normal that you only get audio from "HD Audio play front" unless you have a 5.1 setup, so oss works as expected.

Sound randomly stops working on Iphone 5c

The sound randomly will stop working. (ringers, audio, etc.) I have had this phone for one day.
Oddly enough, the same thing was going on with my iphone 5 which is a big reason I went and upgraded, now i am just very aggravated!
Anyone know what could be going on??

I have the same problem with my new 5c, seemingly carried over from when I upgraded from my old 3s that had the same problem - all sounds randomly stop working (although vibrate seems to still work) and then randomly start working again.
When you set up your new phone did you 'restore' from your old phone's back-up or set it up completely like a new phone? I did the former so I assume whatever the 'glitch' is, it may be something to do with that.
I called 1-800-MYIPHONE and was advised to do a hard reset - I questioned the point of that when I effectively started from scratch with my new phone only a few weeks ago (well, when I say from scratch I of course mean I 'restored' from my old phone's back-up so that all my stuff would carry over...), plus given the coincidence of having the same problem on my old phone... Next guidance was to restore the phone to factory settings and start over from 'new phone' status, which I did this afternoon... so far so good but we shall see. Here's a link to the guide on how to do it if you want to give it a whirl:
http://support.apple.com/kb/HT1414?viewlocale=en_US&locale=en_US

Toshiba notebook registration reminder has stopped working

Hi
everytime I open my laptop it shows "Toshiba notebook registration reminder has stopped working"
How can I fix that?

Hello
Do you need the registration reminder? I dont think so if you have already registered your notebook
Easiest way is you disable the program from start up Navigate to start > run > msconfig and select start up tab. Then search for registration reminder and uncheck the box.
Afte restarting the computer it shouldnt appear anymore. Can you confirm this?

Toshiba L55-A5226 Touchpad Randomly Stopped Working

Similar Messages

Maybe you are looking for