Toshiba L755 is the only one that will not PXE BOOT

I have a few host on my network which it has VMWare 10 installed, successively performed deployment into those machines(Hosts and created VM"s). Now, I do have also a Toshiba L755-S5258 that will not complete the process, it does not give any
errors. The following is the messages it gives.
Client MAC ADDR: xx xx xx xx xx xx GUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXX
Client IP:XXX.XXX.X.XX MASK: XXX.XXX.XXX.x DHCP IP: XXX.XXX.X.X
Gateway IP: XXX.XXX.X.X
Downloaded WDSNBP...
Press F12 for network service boot
Windows Deployment services: PXE boot Aborted.
PXE-MOF: Exiting Intel PXE ROM
This si the only unit that does not follow through with the deployment
Note that I've deleted other machines that I successively deployed to from the Known Computers on Active Directory User and Computers, with not good results
Please any one help me decipher this headache

Hi,
Are your using the WDS for the Windows deploy? A network boot program (NBP) is the first file that is downloaded and executed as part of the network boot process and it controls
the beginning of the boot experience (for example, whether or not the user must press F12 to initiate a network boot). NBPs are specific to both the architecture and firmware of the client. You must accounting the screen press F12 to allow the system boot
from the WDS. The VMware® workstation PXE booting issue please ask your software vendor.
The related KB:
Managing Network Boot Programs
http://technet.microsoft.com/en-us/library/cc732351(WS.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

I have the ipad 1, ios 5.1 is its max, and garage band requires ios 7.0, how do i buy garage band version 1.3, its the only one that will work, apple is so hard to get a hold of on these kind of things.

I have the ipad 1, Ios 5.1 is its max, and garage band requires ios 7.0, how do i buy garage band version 1.3, its the only one that will work, apple is so hard to get a hold of on these kind of things.

Unfortunately the answer is still no.

IMac the only one that will connect with internet

I have a wireless network set up in my home office. I have an Airport wireless router and my internet service is through Frontier with a Westell 6100 modem that is probably five years old. When I set up my WiFi network with the 27" iMac, Airport Express and modem everything works fine... not super fast but DSL is all we can get out in the rural areas. I can access the internet with no problem. When I try to connect to the internet, through my WiFi, my iPhones, iPad & Macbook Pro will not connect. I can see the WiFi signal on everything but when I try to connect to the internet or email accounts, I get nothing. I have taken all of these to Strabucks and they connect just fine but at home only the iMac seems to work. This is very frustrating.
Appreciate any help or suggestions you can give.

This may take a while to solve, but we can go through the steps a little bit at a time.
First of all, what generation extreme are we talking about here?

How come my phone will no longer hook up to my work wi-fi? it has for almost 2 years and all of a sudden it does not. I am the only one that can not get on.

My phone is no longer hooking up the my Wi-Fi at work. I has for almost a year and now all of a sudden it will not. Everyone can hook up so they did not change anything as far as the Wi-Fi. It hooks up at my Wi-Fi at home fine and other areas, just at work is the problem. What could be causing this? I am using the Motorola Moto Rzr

Could be your work banned your particular MAC address or some such. Maybe they ran an analysis on network usage and type of use and found you to be a large consumer on their network. IDK what type network you are on or business you work at. I know it's been done before to curtail employee efficiency. Otherwise, you may need to speak to the administrator of said network.

Facebook is the only website that will not load on safari (nor firefox)

I really don't understand the problem. I can load the login page, but it won't log me in. I can't load the homepage (www.facebook.com), but I can get to www.facebook.com/login.php. It won't load on Firefox either. I have a fine internet connection, because every other website works fine. I emptied the cache, but that didnt do anything. i even used another ethernet cable...still nothing. any ideas?

Hi
Facebook will load on my mac, as it did on Reggies and the other macs' you spoke of. There has to be some problem with your user account.
Try it in a test or other user account try Safari in a Test account, to create one: This will show if this is a systemwide problem or isolated to your user name account.
System Preferences /Accounts/ Login Options use the [+]
to create one, for ease you could enter "Test" in all fields.
Log out of your user name & into the test acc. if it works there..
As well as the trashing of the com.apple.Safari.plist. that Reggie wisely recommended do the following.
Quit Safari go to HD/Users/Your user Home~/Library/Caches/Safari cache folder, drag the folder to the trash
HD/Users/Your user Home~/Library/Cookies folder/Cookies.plist drag that file to the trash.
Do a restart of the computer. Will Face book load in your user acc.?
let us know.~
Eme;~[ )

Oilpaint filter the only one that does not have .pbk file

hello,
i just learned about pixel bender and installed it in photo shop. i also copied the "pixel bender files" folder into plugins/effects directory for after effects to try them out there.
i really liked playing with the OILPAINT filter in photoshop, but when i looked for it in AE i realized something weird... there is no .pbk file for OILPAINT like there is for all the other filters. - so, it doesn't seem i can use it in ae...
does anybody know why this is? or how to work around it?
thanks
max

The oilpaint filter is currently proprietary to Adobe which is why there's no PBK file for it. If you'd like to see it in After Effects you can make a request on the AE forums.

My iphone5 is in the same room with an ipad, 2 kindles and 2 iphone4S and it's the only one that does not have a wifi signal. pls help

why does my iphone5 not have the same wifi coverage as 2 other iphone4s in the same room?

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple Logo. If you are still not able to connect try resetting your network settings. Go into your settings>general>reset then tap reset network settings. If both fail to fix your problem try restarting your router.

I have one iPad that will connect to our wifi but I have another one that will not, why is that

I have an iPad that will not connect to the wifi at our house. My sister also has an iPad and it connects automatically. Mine is the only one that will not. I can't figure how to get it to work. I have taken my iPad other places with wifi and it connects right away. I know that some wifi systems have a limit on how many things can connect to them but I have even gone so far as turn off the wifi on every device that we have that connects to the wifi and it still doesn't work. I don't know what to do or how to get it to work?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I own a HP Envy100 eAll-in-One d4100 and the only App that will work is Snapfish,

I own a HP Envy100 eAll-in-One d4100 and the only App that will work is Snapfish?

All others show a connection error - Touchsmart is not responding.

HT4927 Am I the only one that finds this a little crappy? Do you think there will be a future update fix?

Am I the only one that finds this a little crappy. Do you think there will be a update to fix this issue so you don't have to reinstall the whole library?

I doubt it, but no one here knows. There are other forms of backing up.

I bought my first iMac 27" i5 in November 2011 last year. Do you think there would be a update that will Features a Retina Display, Siri etc ?? So my iMac will be the same as the new one that will be released this year, Or will I have to buy a new iMac t

I bought my first iMac 27" i5 in November 2011 last year.
Do you think there would be a update that will Features a Retina Display, Siri etc ??
So my iMac will be the same as the new one that will be released this year,
Or will I have to buy a new iMac to get all these new updates ??
It would be a shame if I did because my iMac is only 6months old if that ..
Kind regards Simon Trott Apple user and proud of it

We're not allowed to speculate on future or rumoured Apple products, but we all know there'll always be newer tech coming along.
The iMac you have is an excellent machine, be happy with it and get a good few years use out of it. By the time your machine is slowing down, whatever comes next will have been updated numerous times.
I had the 2011 i5 27" delivered about 3 weeks ago. It's a cracking machine

Want my JFrame to be the *only* one that can end the program when closed

Hi all,
I have an application that is essentially a launcher for other applications -- it's a holder to allow us to demo our work and other Java examples (not necessarily our work). The launcher will either run methods to launch an application or will find a class's main method and invoke that.
In all cases, the other applications open up their own JFrames, separate from my launcher (this is a good thing). The problem is that, in general, the other JFrames are set to EXIT_ON_CLOSE. This means that if the user closes the second window, everything will close.
Is there anyway to prevent this from happening? I'd like either a way to say that my JFrame is the only one that can exit the program when closed, or to say globally that JFrames can't exit on close, and then re-work my initial frame so that it is still able to exit.
Note that changing all the other applications so that they do not include the EXIT_ON_CLOSE line is not an option (several of the applications we have the right to use, but not the right to modify, for instance).
Any thoughts?
Thanks,
Sam

Darryl.Burke wrote:
I have a similar launcher application and this is how I tackled the issue....
Window[] windows = Window.getWindows();
This seems like a great work-around. The only problem is that Window.getWindows() is only 6.0, and unfortunately I can only assume 5.0. I can't see another method in the Window class that will return unowned windows -- is there another method that you know of?
Edit: I found I can use Frame.getFrames() instead, but unfortunately I've discovered this doesn't solve my problem. One of the applications is listening to window closing and is calling System.exit(0) itself, and is not using EXIT_ON_CLOSE as I previously thought. So I think that launching a new JVM may be the only option.... Any advice on how to do this? I'm a little stuck with the ProcessBuilder stuff above.
>
edit In future (not this time), Swing related questions should be posted in the [Swing forum|http://forums.sun.com/forum.jspa?forumID=57]
I guess I was thinking this as a process-oriented question (I had already been thinking of the "different JVM" tactic), but the other option was to think of it as a pure-swing problem, like your solution above. Guess I should have just cross-posted -- everyone loves that! ;-)
Edited by: Asbestos on Dec 18, 2008 12:32 PM

HT1535 Transfered my music and video library from my laptop to my PC. Syncing my PC to my IPOD classic and my IPAD without incident. But when I try to sync my IPOD Touch to my PC, the only thing that will sync is the music I purchased. Help!

Transfered my music & video library from my laptop to my PC. Syncing my ipod classic and my ipad without incident to the PC. But when I try to sync my ipod touch, the only thing that will sync is music that I have purchased on that PC. Any ideas?

where on my computer am I suppose to make the individual picture files and have them to upload on my ipod touch.... I do have a photo library on my computer, but in the photo tab in itunes for the ipod touch and there is nothing checked for syncing, cause when I do check it it always says its going to replace everything i have in my photo library on my ipod touch..... So how am i suppose to have it checked and have it NOT replace pictures on it????
Also I cannot make more photo albums into my ipod touch, it just replaces the one album every time....
I am very frustrated cause I have tried the manuals and the apple support help etc and nothing pertains to my exact issue.....
Please if u could elaberate I would appreciate it alot.....
thank u

I have purchased itunes match but the cloud will not load on my ipad 4.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

iTunes Store- Transferring purchases from iOS device or iPod to a computer
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music

Toshiba L755 is the only one that will not PXE BOOT

Similar Messages

Maybe you are looking for