Toshiba LCD 40G300 television won't stay shut off after connecting to my tablet

I have an ASUS Transformer Pad TF300T. I connect my tablet to my television by using the HDMI port on the television. This action works completely fine. When I disconnect my tablet from the television and attempt to turn off my television, the television turns off momentarily and then turns back on. The only way that I have found to correct this is to unplug my television. This apparently allows the television to reset itself and thus I'm able to shut off the television and have it stay off. Please advise as to what I can do so that I don't have to continue to unplug my television to shut it off.
Thanks! 

Does this happen only after using it with the tablet? Do any other devices have this effect?
What happens if you turn off the TV first and then unplug the tablet?
- Peter

Similar Messages

  • Nokia Lumia 2520 Shut off after connected to keybo...

    Hello all, 
    I have a Lumia 2520 tablet which I've had for about 4 months now.  I initially purchased one of the power keyboards with my tablet which worked great at first.  Then the tablet stopped responding to tkeyboard.  I sent in the tablet for repairs and it was returned with a status "Not broken" or something like that.  The tablet still wouldn't respond to the keyboard, though.  thinking that the problem was most likely teh keyboard, I purchased another keyboard. (I really wanted the red one anyway).
    At first, the tablet and keyboard was working just fine.  But two weeks later, the tablet started shutting off when connected to keyboard.  So here's the basic scenario.  If my tablet is docked in the keyboard, I won't turn on.  I've attempted to hold the power button down forcing a full shutdown, and then turn it on, but that doesn't work either.  If I remove the tablet from the keyboard, it still doesn't turn on.  But if I hold down the power button for approx 15 seconds, and then try to turn it on, it comes on without any problems.  Now, if I re-dock the tablet with the keyboard, it immediately shutdown.  As if it's going to sleep.  But once again, will not turn back on unless I repeat the remove and holding down the power button. 
    Is this a problem with the tablet, or the keyboard.  
    Please help.   
    thanks!!
    Steve

    Yardi Systems supporter of Microsoft and creates program to run on IE. One such program is called Payscan. It allows users to scan Invoices and post into the system. After posting the image of such invoices are abailable for view, for that Yardi prompts to install GPI to view images. However Microsoft does not allow to run such programs in my Windows RT tablet. Is there a work around? The image could be exported as PDF and opened using Adobe, which is a waste of time and space constraints

  • IPhone 4 iOS 7 lock screen won't automatically shut off after receiving a message

    whenever i get a message on my iphone 4 (ios 7) the lock screen does not automatically shut off. it just stays on until i manually turn it off and it drains my battery completely! how do i fix this? it's really annoying.
    i have auto-lock set to 1 minute.

    Same issue here.
    Noticed it on a iPhone 4 and iPhome 5S.
    Already running iOS 7.0.3.
    Screen, last night three times, goes into lockscreen and seems to be stuck there. It won't go off (into suspend or how you call it) until you hit the button.
    Not sure if it's messages related, since i didn't get any message the last "freeze" time.
    I was running some apps, including GPS and Safari and whatsapp.

  • Won't boot unless I hold the power button and shuts off after closing

    My mac book pro (current gen) shuts off after closing the screen and won't start up unless I hold the power button for about 10 secs.
    Any suggestions?

    Do a SMC and PRAM reset and read this guide

  • Two Problems:MSN Won't Download,  Display Shuts Off After 1 Minute

    Hi ok so i have two problems, I had MSN 6.03 for a while but last night it just stopped opening, so I deleted it and tried to redownload, but when i try to download it, it says "failed to mount" every time.
    The second problem is the display shuts off after 1 minute, I went to the energy saver and i changed it to 15 minutes an I locked it, but when i exit out of the energy save it goes back to 1 minute HELP!!!

    Sounds like you have either cache, finder, or disk corruption problems. Follow the steps here:
    http://www.thexlab.com/faqs/repairprocess.html

  • M92p won't stay turned off

    Just got a brand new M92p here which will not stay turned off. I perform a regular shutdown in Windows, the system turns off for about a second or two, then turns on again automatically and boots into Windows. I turned off all the Wake features except WOL and also disabled Intel AMT. Bios is also set to stay turned off after a power loss.
    Any ideas what's going on here?

    Well, I don't really know exactly what the problem is for you that's waking up your M92p's.  I'm only responding to your comment that you seem to have narrowed it down to those machines which make use of a USB cable connecting the M92p to the Samsung monitor, which has a built-in USB hub.
    And the USB hub entries in Device Manager do have a "power management" tab that does have a checkbox that says "allow this device to wake the compurter".  So it seemed worth looking at.
    It may well be that the "allow this device to wake the computer" is already UN-CHECKED in the power management tab, and in fact I believe it's the Windows default setting for that checkbox.  So it's likely that this particular possibile explanation for some way that your Samsung monitors might have been responsible for your M92p's mysteriously waking up, and an easy thing to try with a simple un-check of the option, turns out to be a dead end.  But it still seems worth looking into as a possibility.  Can't hurt.
    And if it turns out that you DO actually have to un-check this option (which for some reason has gotten checked) in all of your machines that use this particular Samsung monitor with the USB cable connection as that DOES fix the problem of all the M92p's waking up unexpectedly, well... that's life in IT I guess.

  • 15"Macbook Pro shuts off after 5 minutes when using full-charged battery.

    15"Macbook Pro shuts off after 5 minutes when using full-charged battery.  If not touched, computer stays on.  But start typing, it shuts off.  Was told this was a fan problem.  Had fan replaced last spring.  But problem has begun again.  Is this a battery issue or somethig else?

    Charge Information:
      Charge remaining (mAh):          3747
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          3899
      Health Information:
      Cycle count:          90
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12382
    It says it looks fine....

  • I have an iPhone 5 that constantly shuts off after 5-10 minutes..

    My iPhone 5, purchased on Amazon, used, constantly shuts off after 5-10 minutes of uptime right after a color fade. I got it to stay on but I just can't reboot it otherwise it'll happen again. But if I don't reboot it, my battery percentage will not update. I'm not sure if it's water damage or just a bad battery. I'm afraid to leave it charging overnight since the battery percentage doesn't budge and it'll just continue charging.

    You should get it checked by visiting an Authorized Apple Service Provider or Apple Store and see if the battery needs to be replaced.
    Did you check the moisture indicators to see if the device did get damaged by liquid?
    Liquid Contact Indicator location

  • Need help fixing video shut off after 2 minutes in non-windows mode

    Good morning experts in this forum,  I need your help solving a hardware/firmware problem of my computer. I have a Hpe 250f computer with Radeon 5700 series video card on it.  I recently noticed one strange problem which prevents me from doing any meaningful work in non-windows mode: The video will be shut off after around 2 min if the computer is not in Windows mode.  This includes BIOs mode and recovery mode.  There is no problem if the computer logs on Windows within 2 minutes.  But if I stay in BIOs settings or try to use HP diagnostics or try to recover a backup using windows backups for around 2 min, the monitor will turn blank and the power button of monitor will turn yellow from green indicating no video output to it.  It can not wake up by mouse or keyboard. I read that older BIOs have problem with fan speed and I reflashed the BIOs.   But it did not work. This problem drives me mad since I had occasional hard drive failures recently and I could not recover my system (That is why I noticed the problem recently, but the problem could have existed when I bought the computer).  Now the computer is out of warrenty and I could not find any similar case using Google search.  I really appreaciate your help. Thanks

    I had the same problem when I upgraded.  In my case it definitely was the power supply.  In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived.  Swapped in a 430W to test and everything was perfect.  At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • I have a Ipod shuffle 4th generation. I would like for the music to shut off after one hour long song automatically rather than go to the next song. Is this possible?

    I have an ipod shuffle 4th generation. I would like for the music to automatically shut off after one hour long song rather than going to next song on the list. Is this possible?

    Sorry, but it's not.  The only way to get this to work is to only put the one hour song on your Shuffle. 
    B-rock

  • Final Cut Pro Randomly Shutting off after Minutes

    Every time I open FCPX and begin editing it randomly shuts off after about 3-4 minutes. Regardless of what I am doing. I get no wheel or anything, it just shuts off clean. I am running the most recent update to Lion, FCPX 10.1 with 8GB of ram... this is really frustrating. Any thoughts?

    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
    http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • IPad Personal Hotspot antenna shuts off after a few minutes of non-use. This happens in both Verizon 3G and LTE areas. Turning off LTE does not help. Turning Personal Hotspot off and then on works. Does this happen on Mini and Retina?

    iPad--third generation shuts off antenna/hotspot after a few minutes of non-use.
    Happens in 3G and LTE VZ environment.
    Turning hotspot off and on getsw things working again.
    Does Apple have antenna on a timer so it shuts off after a few minutes?
    Does this happen on Mini and Retina as well?
    FLAGSTAFFLAR

    Fixed!
    Two things together have restored connectivity.
    1.  I changed the name under Settings > General > About > Name from My Name's iPad to iPad of My Name.  I read somewhere that iOS 7.0.1 or 7.0.2 (I forget which) sometimes had issues with apostrophes here.  Easy enough to test.
    2.  I then reset (again) the APN settings under Settings > Cellular Data > APN Settings > Personal Hotspot and reentered our provider's info (APN, Username, Password) there.
    I don't know WHY it worked, but the personal hotspot is now happily sharing (again) internet connectivity with my MacBook Pro.

  • Iphone 3g shuts off after the apple loading screen then cuts back on

    Iphone 3g shuts off after the apple loading screen then cuts back on by its self but when i connect it to a charger it works fine also my on/off button is unresponsive (i havent dropped it or wet it so im confused why its doing this)

    Welcome to the discussions,
    normally you could try to reset the phone by holding the sleep and home button until the Apple logo comes back. But since the sleep button is unresponsive, try to restore "as new iPhone", if necessary without using the backup afterwards, in case the backup contains corrupt data.
    Restoring: http://support.apple.com/kb/HT1414

  • My MacBook Pro starts and shuts off after loading for sometime

    My MacBook Pro starts and shuts off after loading for sometime

    Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
    If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there.

Maybe you are looking for