Toshiba LX830 - Issues Connecting to the Television

Hi there,
I have a TOSHIBA LX830 PQQ19A-01800R with the Serial Number: XC395277Q
I've got the PC itself connected to y LG 3d Smart TV through a HDMI cable, I've checked the settings for security and for filesharing etc and for some reason the television isn't picking up the PC for screen sharing.
Each time I've clicked to put on 'second screen' or 'mirror image' etc it clicks without a problem no warning messages show up and yet no image shows up on the television.
The 'Change the appearance of your display' isn't picking up the television either in the first drop down menu 'display'.
I don't know what else to do, or whether this computer even connects to a TV, I sincerely hope it does otherwise I would consider this to be a major fault with this product.
Thank you for your time.

The Toshiba LX830 specifications says that this All-In one Toshiba computer supports the *HDMI IN* port but it does NOT support HDMI OUT port
HDMI IN ports receives the signal.
This means that you can connect some external device like Play station or an Xbox to this All-In one display.
In order to connect an external TV to the notebook/computer, you would need an HDMI OUT port which does not seem to be available!

Similar Messages

  • My apple tv, when connected to the television, will only show an itunes icon with a usb cord

    My apple tv, when connected to the television, will only show an itunes icon with a usb cord. I don't know whay to do?

    Don Sullivan wrote
    "Same thing just happened to  me. There was a software update available, it installed the update and then died with that visual on the screen. Reset doesn't work and it won't even show up in iTunes to try and do anything with it. I think they just bricked it on me."
    Same thing just happened to me too...
    I did an update a couple of days ago: and it seemed to be working fine. Just did another update today: got a flashing light, sometimes a blank screen, and sometimes the itunes logo / USB symbol...

  • There was an issue connecting to the server. please try again later. 124.

    I'm trying to publish a site withdreamweaver as one of the 5 sites I get with my CC account using business catalyst, but I get the following error message "There was an issue connecting to the server. Please try again later. 124." whenever i try and connect which doesnt really help.
    I'm logged in with the correct account in dreamweaver, and i have no issues publishing sites from muse using my CC account.

    Hi Pirmin87,
    There was a known brief outage a few days ago that could have resulted in this.
    - http://status.businesscatalyst.com/
    However at the moment everything should be connecting fine.  If still an on-going issue please reach BC direct chat support for further investigation. 
    - http://helpx.adobe.com/contact.html?product=business-catalyst
    Kind regards,
    -Sidney

  • "We are experiencing an issue connecting to the Adobe Color CC servers"

    Keep getting the error "We are experiencing an issue connecting to the Adobe Color CC servers" every time I try to access Color CC, I am signed into the Creative Cloud.
    Has anyone else had this problem?

    I have been getting the same issue for about a week now. However if I create a new Adobe ID with another email address, that email doesn't have the issue. Does anyone know what might be causing this? I have tried clearing cookies and using multiple browsers and nothing seems to work.

  • Palm 680 Issue - "Connecting with the deskop using Cradle" msg

    I have a curious problem with my 680 Smartphone.  When not connected to the cable it is continously and spontaneously attempting to connect with the desktop.  Is this some sort of HW short or malfunction?  The phone is unusable.  Everytime I clear the msg it goes back into synch mode.
    Even stranger, if I connect the cable from my PC to the phone, it will become usable again.  I can clear it out of synch mode and use all the features of the phone. 
    Has anyone ever experienced this?  I have done all the suggested troubleshooting on the support site.
    Post relates to: Treo 680 (AT&T)

    Hello GlennPalm1000, Welcome to the Palm Support Community.
    This issue seems to appear when the bottom Hotsync connector gets wet or otherwise contaminated.  You might try cleaning it with isopropyl alcohol or contact cleaner from an electronics store.
    Any chance the phone got wet?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Anyone having issues connecting to the network server today?

    I just upgraded to the iPhone 5.  After I restored my new phone, I was unable to use iMessage.  I tried to sign in, but I keep getting a message saying "unable to connect to the network server.  Try again"  Any help would be appreciated!  Thanks!

    There has to be a problem on the server side.  So many times before the system status indicates there is not problem and everything is fine, but that is not always the case.  I spent hours on the phone one day with the same issue and it was a waste of my time because it turned out to be a problem with the servers.  It took a long time for the problem to get fixed and what I learned is that no one typically wants to admit there is a problem on the apple side and not the device/user account.  The last problem took almost 24 hours to fix and what was so bad was the amount of time I wasted with technical support trying various things to try to fix what couldn't be fixed on my end.  Fix the servers problem apple!

  • After Upgrading to IOS 5.1 I am having issues connecting to the WIFI

    After updating to IOS 5.1 i am having ptoblems connectng to the WIFI.
    If I reboot my wireless route it will connect
    Without the reboot it will just set and search.
    My wife's phone is running 4.2.1 and connects everytime.
    Can I back out of the upgrade easily until the problem is fixed? My Data plan minutes are on the rise.....

    I have upgraded the router to the latest rev.. Still does not work... My computer connects fine and my wifes phone connects fine

  • TS3297 Anybody else having issues connecting to the App Store after iOS 6.0 update?  I am using an iPod 4th gen and am having issues with a blank screen on the App Store.

    My 4th gen ipod touch won't connect to the App Store after I updated to ios6.0.  It just gives me a blank screen no message or anything.

    hi! im using an ipad2 and updated to ios6 last 3days ago. since then my app store is blank and is prompting an error saying cannot connect to itunes.

  • Installation issues - Connection to the specified server has failed

    Hi
    i am trying to install sap server on windows 2008.my SQL server is on another box with windows 2003 and SQL 2008
    select server type drop down is blank and after entering SQL server name/user/password i am agettig this error
    "Connection to the specified server has failed"
    to make sure i have access to sql server ,i hav installed SQL 2008 native client and created one test odbc DSN to test that my serevr is talking to database server
    databse and both 2003 and 2008 machines are 64 bit
    Please help

    yes
    one thing i am noticing when i run install is i am getting this message on first screen
    so is the setup i ma running really compatible with SQL 2008?
    i am runing the setup from Patch0 because other patch downlads do not have ther server setup
    The installer detected an outdated version of MSSQL installed on this machine.
    If you are using another type of database to run SAP Business One, such as DB2 or MaxDB, press Skip.
    To upgrade your MSSQL version exit this installation. Only an experienced system administrator or DBA should upgrade the database.

  • Is there an issue connecting to the web services server currently?

    Keep getting an errror, "problem connecting to web services server" This used to work fine. I tried turning off web services and it allowed me to, but now I can't re-enable them.

    Hi Pirmin87,
    There was a known brief outage a few days ago that could have resulted in this.
    - http://status.businesscatalyst.com/
    However at the moment everything should be connecting fine.  If still an on-going issue please reach BC direct chat support for further investigation. 
    - http://helpx.adobe.com/contact.html?product=business-catalyst
    Kind regards,
    -Sidney

  • HT204400 Does anybody else have issues connecting to the sever?

    I get really frustrated when I try to watch a movie that I purchased and it gets jacked up when I try to watch it.  I then have to pause and try to go back to the main menu.  When I try to watch it again, I get the message that Apple TV is unable to the server.  I know that it is not my wifi because I am able to search the web while my Apple TV does not work.

    hi! im using an ipad2 and updated to ios6 last 3days ago. since then my app store is blank and is prompting an error saying cannot connect to itunes.

  • Airport issues, connecting to the internet, pllleaaasseee.

    Okay, I've been at this for days, literally, it's starting to drive me up the wall. I've suddenly lost the ability to load anything internet related. I use Airport to connect to my Linksys router wirelessly, my Airport says I'm connected, but I'm not. Under my Network Diagnostics, my Airport is fine, Airport Settings are fine, Network settings are fine, but my ISP has failed, my Internet has failed and my Server has failed. I got it working again today for about 10 minutes because I tried a new IP adress thing, but it still stopped working. And sometimes my Airport will say "self-assigned IP." If anyone could please assit me, it would be MUCH appreciated .

    Please tell me you figured something out...Ive called Apple (They said something about mac book pros not connecting to 2 wire routers) and then ATT said its fine... my m.b.p. has worked fine for 10 months without a problem...im soo bummed! Did you figure out anything?!

  • There was an issue connecting with the server. Please try again later. 122

    Hello,
    I started to work in a new company where the former employee used a trial version. Now I bought a license and opened the Dreamweaver for the first time in my whole life. I tried to import a business catalyst site but there seems to be a problem with the server as it keeps saying what's mentioned above.  Is there anything I could do besides trying again later? I am new with Dreamweaver and no expert in servers

    Open a new tab in your browser.
    Go to http://www.businesscatalyst.com/admin/Index.aspx
    Check if you are able to login using the registered email id and password.
    Make sure the email id  from which you are logging into  DW CC is same for Business Catalyst.
    Also read the document below for more clarification.
    http://helpx.adobe.com/dreamweaver/using/dreamweaver-business-catalyst.html

  • ASA 5505 not connecting to the internet

    My ASA 5505 9.1 previously worked but I recently swapped out my modem (different issue).  The new modem is bridged so my ASA gets an IP address from the ISP.
    Internet ------ SB6141 modem ---------- ASA ---------- rest of network (direct connection or router)
    I have no issues connecting to the ASA and when I remove the ASA my router properly connects to the internet.  
    Things I have tried
    Setting static address for ASA outside interface
    Pinging 8.8.8.8 from ASDM (ping fails in ASDM but works in CLI)
    Modifying the NAT
    Successful packet trace
    Reading multiple other forum entries
    I can't figure out what is blocking the traffic to the outside.  Below is my running-config.
    xlate per-session deny tcp any4 any6
    xlate per-session deny tcp any6 any4
    xlate per-session deny tcp any6 any6
    xlate per-session deny udp any4 any4 eq domain
    xlate per-session deny udp any4 any6 eq domain
    xlate per-session deny udp any6 any4 eq domain
    xlate per-session deny udp any6 any6 eq domain
    xlate per-session deny tcp any4 any4
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    name 10.0.1.0 Wireless
    interface Ethernet0/0
     switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
     nameif inside
     security-level 100
     ip address 192.168.1.1 255.255.255.0 
    interface Vlan2
     nameif outside
     security-level 0
     ip address dhcp setroute 
    boot system disk0:/asa914-k8.bin
    ftp mode passive
    clock timezone PST -8
    clock summer-time PDT recurring
    dns domain-lookup inside
    object network obj-192.168.2.0
     subnet 192.168.2.0 255.255.255.248
    object network obj_any
     subnet 0.0.0.0 0.0.0.0
    object network Wireless
     subnet 10.0.1.0 255.255.255.0
     description Created during name migration
    object network NETWORK_OBJ_192.168.2.0_29
     subnet 192.168.2.0 255.255.255.248
    object network obj_any_1
     subnet 0.0.0.0 0.0.0.0
     description Outside
    object-group protocol TCPUDP
     protocol-object udp
     protocol-object tcp
    object-group service DM_INLINE_TCP_1 tcp
     port-object eq www
     port-object eq https
    object-group service DM_INLINE_TCP_2 tcp
     port-object eq 4444
     port-object eq 4445
     port-object eq 4446
    object-group service Wemo tcp-udp
     port-object eq 3478
    object-group service DM_INLINE_SERVICE_1
     service-object udp destination eq 1701 
     service-object tcp destination eq pptp 
     service-object udp destination eq 4500 
     service-object udp destination eq isakmp 
     service-object tcp destination eq 50 
     service-object tcp destination eq 51 
     service-object tcp destination eq 44000 
    object-group service DM_INLINE_TCP_3 tcp
     port-object eq 4444
     port-object eq 4445
     port-object eq 4446
     port-object eq 5900
     port-object eq 5901
    object-group network DM_INLINE_NETWORK_1
     network-object host 217.79.189.135
     network-object host 24.197.239.70
    object-group service DM_INLINE_TCP_4 tcp
     port-object eq 5900
     port-object eq 5901
    object-group service DM_INLINE_TCP_5 tcp
     port-object eq www
     port-object eq https
    access-list inside_access_in extended permit object-group TCPUDP object Wireless any 
    access-list inside_access_in extended permit icmp object Wireless any 
    access-list inside_access_in extended permit ip object Wireless any 
    access-list inside_access_in extended permit object-group TCPUDP 192.168.1.0 255.255.255.0 any 
    access-list inside_access_in extended permit icmp 192.168.1.0 255.255.255.0 any 
    access-list inside_access_in extended permit tcp 192.168.1.0 255.255.255.0 any object-group DM_INLINE_TCP_5 
    access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any 
    access-list inside_access_in extended permit icmp 192.168.2.0 255.255.255.0 any 
    access-list inside_access_in extended permit ip 192.168.2.0 255.255.255.0 any 
    access-list inside_access_in extended permit object-group TCPUDP 192.168.2.0 255.255.255.0 any 
    access-list inside_nat0_outbound extended permit ip any4 192.168.2.0 255.255.255.248 
    access-list inside_nat0_outbound extended permit tcp any4 192.168.2.0 255.255.255.248 
    access-list inside_nat0_outbound_1 extended permit ip any4 192.168.2.0 255.255.255.248 
    access-list outside_access_in extended permit tcp any object AppleRouter object-group DM_INLINE_TCP_2 
    access-list outside_access_in remark VNC
    access-list outside_access_in extended permit tcp any object AppleRouter object-group DM_INLINE_TCP_4 
    access-list outside_access_in extended deny tcp object-group DM_INLINE_NETWORK_1 any object-group DM_INLINE_TCP_3 
    access-list outside_access_in remark Migration, ACE (line 2) expanded: permit tcp any4 interface outside object-group DM_INLINE_TCP_1
    access-list outside_access_in extended permit tcp any4 0.0.0.0 0.0.0.0 eq www 
    access-list outside_access_in extended permit tcp any4 0.0.0.0 0.0.0.0 eq https 
    access-list outside_access_in remark ICMP config
    access-list outside_access_in extended permit icmp any4 0.0.0.0 0.0.0.0 
    access-list outside_access_in extended permit tcp any4 object AppleRouter object-group Wemo 
    access-list outside_access_in extended permit udp any4 object AppleRouter object-group Wemo 
    access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any4 interface outside 
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-715-100.bin
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    nat (inside,any) source static any any destination static obj-192.168.2.0 obj-192.168.2.0 no-proxy-arp route-lookup inactive
    nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.2.0_29 NETWORK_OBJ_192.168.2.0_29 no-proxy-arp route-lookup inactive
    object network AppleRouter-4500
     nat (inside,outside) static interface service tcp 4500 4500 
    object network AppleRouter-4444
     nat (inside,outside) static interface service tcp 4444 4444 
    object network AppleRouter-5901
     nat (inside,outside) static interface service tcp 5901 5901 
    object network AppleRouter-5900
     nat (inside,outside) static interface service tcp 5900 5900 
    object network AppleRouter-4445
     nat (inside,outside) static interface service tcp 4445 4445 
    object network AppleRouter-4446
     nat (inside,outside) static interface service tcp 4446 4446 
    object network Wemo-tcp
     nat (inside,outside) static interface service tcp 3478 3478 
    object network Wemo-udp
     nat (inside,outside) static interface service udp 3478 3478 
    access-group inside_access_in in interface inside
    access-group outside_access_in in interface outside
    telnet 192.168.1.0 255.255.255.0 inside
    telnet Wireless 255.255.255.0 inside
    telnet timeout 10
    ssh 192.168.1.0 255.255.255.0 inside
    ssh Wireless 255.255.255.0 inside
    ssh timeout 10
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    dhcp-client client-id interface outside
    dhcpd auto_config outside
    dhcpd address 192.168.1.5-192.168.1.254 inside
    dhcpd auto_config outside interface inside
    dhcpd enable inside

    First lets eliminate the ASA as the problem, Connect a PC directly to one of the "inside" ports on the ASA and make sure it recieves an IP in the 192.168.1.0/24 range.
    add this command to the ASA
    object network obj_any
      nat (inside,outside) dynamic interface
    now try to ping 8.8.8.8 or 4.2.2.2
    If ping works, now add the router back into the loop and see if you are able to reach the internet again.
    Please remember to select a correct answer and rate helpful posts

  • Safari cannot connect to the App Store so I can setup an RSS Reader.

    Let me be clear about a key point first - I can connect to the iTunes Store in the program, I can connect to the App Store in the program, and Safari has no problem acting as a browser.
    BUT, I want to use RSS feeds and this is where things fall down.
    If the Podcasts app is installed then all XML links to RSS feeds default to being opened in the Podcasts app, and I wouldn't mind this if the Podcasts app could actually display RSS feeds, but it can't. No problem, I'll just remove the Podcasts app.
    Now when I click on a link to an RSS feed, Safari gives me the following error,
    Cannot Open Page
    This is a link to an RSS feed. Would you like to search the App Store for apps that can display RSS feeds?
    And my options are Cancel or Search.
    I click Search, because when I find an RSS feed on a page I want to subscribe to I don't want to have that error again.
    The App Store opens and I almost immediately get the error,
    Cannot connect to iTunes Store
    However, once I click the OK option, the App Store works fine. I can connect to the App Store.
    So, I pick an RSS app anyway to install it. It downloads fine, and I go on browsing in Safari. I find another link to an RSS feed, and this pops up again,
    Cannot Open Page
    This is a link to an RSS feed. Would you like to search the App Store for apps that can display RSS feeds?
    Excuse me? I've already installed an RSS app... and by now I've installed 5 different apps in the hopes that at least 1 of them will do what Podcasts obnoxiously did before and claim the default app status for XML links.
    So, Safari works as a browser, the iTunes Store App works, and the App Store app works, but if Safari opens the App Store then I get an error. If I could somehow set which applications opened what links and document types then this wouldn't be a problem either because I could just manually set what I wanted, but I can't.
    ಠ_ಠ
    What the heck? Why was RSS ripped from Safari with nary a word, leaving in its place the pathetic Reading List function? Bookmarks are for reading later, RSS is for push to me updates, Reading List is just plain pointless and a waste of code. And why can't I set what programs I want to open what file types? /rant
    I've already tried the Change Date trick, the Reset All Settings trick, the Turn Off Genius trick, and every other trick I could find where ever the phrase, "Cannot connect to itunes store" popped up in these forums and on the web, and none of them work - I suspect that this is because the App Store does work fine normally for me.
    All I want is for Safari or an RSS program to open an RSS feed when I click on the link while browsing the web. Why is this so darn hard?

    Hi alèna,
    If you are having issues connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

Maybe you are looking for