Toshiba M100 - How to optimize the performance?

I upgrade my Toshiba M100 from XP to Windows 7 after installing 2GB ram.
What to do for better performance to my system?

Hi mate,
What Toshiba M100 you have? Is it Portege M100, Satellite M100 or what else?
To enhance the performance of Windows you should defragment the HDD, disable all services that you dont need and disable all start up programs that you dont need.
If you ask Google for some tips how to optimize, you will find enough! ;)

Similar Messages

  • How to optimize the performance of this code ?

    I've two Movie clips on a flash project. One of them is fixed and the other can be moved by arrow buttons on the keyboard. The two Movie clips have irregular shapes, so HitTestObject and HitTestPoint doesn't work very well. I've a function that detects collision of two movie clips using bitmap. I wanted to update the position of the movable Movie clip so I put the collision detection function under the code of ENTER_FRAME event listener. It works very well, but when I add many fixed movie clips  ( about 10 fixed movie clips in one frame ), the game (.swf file) becomes slower and the performance of the PC becomes slower. I thought that my collision detection function has a negative effect on PC performance so I used the class on this page : https://forums.adobe.com/thread/873737
    but the same thing happens.
    Would you tell me how to speed up the execution of my codes ?
    Here is part of my code :
    stage.addEventListener(Event.ENTER_FRAME, myOnEnterFrame);
    function myOnEnterFrame(event:Event):void
      if (doThisFn) // doThisFn is a variable to allow or prevent the movable movie clip form being moved with keyboard arrows
      if ( left && !right ) {
      player.x -= speed;
      player.rotation = player.rotation - speed ;
      if( right && !left ) {
      player.x += speed;
      player.rotation = player.rotation + speed ;
    if( up && !down ) {
      player.y -= speed;
    if( down && !up ) {
      player.y += speed;
    // The fixed movie clips are wall1 ,wall2 , wall3 , wall4 , ... and so on
    // the following code checks how many walls exists on each frame and pushes them into the wallA  array
      for(var i:int=0;i<1000;i++) // We can put up to 1000 wall object into the wallA array
      if(this['wall'+i]) // If the object wall exists, push it into the wallA array
      wallA.push(this['wall'+i]);
      for(i=0;i<wallA.length;i++)
      if( h.hitF (player , wallA[i] ) || gameOverTest ) // This code checks if the player ( the movable movie clip ) hits the walls or not
      trace ( "second try" ) ;
      gameOver.visible = true ;
      doThisFn = false ;
    //I think the following codes are easy to excite and run. I think the performance issue is due to previous codes.
      if (player.hitTestObject(door))
      win.visible = true ;
      doThisFn = false ;
      if (key) // if there is a key on frame
      if (player.hitTestObject(key))
      key.visible = false ;
      switch( currentFrame )
      case 4:
      wallA[0].visible = false ;
      wallA[0].x = 50000;
      break;
      case 5:
      wall14.play();
      wall8.x = 430 ;
      break;

    it's a simple question that usually has no simple answer.
    here's an excerpt from a book (Flash Game Development: In a Social, Mobile and 3D World)  i wrote.
    Optimization Techniques
    Unfortunately, I know of no completely satisfactory way to organize this information. In what follows, I discuss memory management first with sub-topics listed in alphabetical order. Then I discuss CPU/GPU management with sub-topics listed in alphabetical order.
    That may seem logical but there are, at least, two problems with that organization.
    1. I do not believe it is the most helpful way to organize this information.
    2. Memory management affects CPU/GPU usage, so everything in the Memory Management section could also be listed in the CPU/GPU section.
    Anyway, I am going to also list the information two other ways, from easiest to hardest to implement and from greatest to least benefit.
    Both of those later listings are subjective and are dependent on developer experience and capabilities, as well as, the test situation and test environment. I very much doubt there would be a consensus on ordering of these lists.  Nevertheless, I think they still are worthwhile.
    Easiest to Hardest to Implement
    1.  Do not use Filters.
    2.  Always use reverse for-loops and avoid do-loops and avoid while-loops.
    3.  Explicitly stop Timers to ready them for gc (garbage collection).
    4.  Use weak event listeners and remove listeners.
    5.  Strictly type variables whenever possible.
    6.  Explicitly disable mouse interactivity when mouse interactivity not needed.
    7.  Replace dispatchEvents with callback functions whenever possible.
    8.  Stop Sounds to enable Sounds and SoundChannels to be gc'd.
    9.  Use the most basic DisplayObject needed.
    10. Always use cacheAsBitmap and cacheAsBitmapMatrix with air apps (i.e., mobile devices).
    11. Reuse Objects whenever possible.
    12. Event.ENTER_FRAME loops: Use different listeners and different listener functions applied to as few DisplayObjects as possible.
    13. Pool Objects instead of creating and gc'ing Objects.
    14. Use partial blitting.
    15. Use stage blitting.
    16. Use Stage3D
    Greatest to Least Benefit
    Use stage blitting (if there is enough system memory).
    Use Stage3D.
    Use partial blitting.
    Use cacheAsBitmap and cacheAsBitmapMatrix with mobile devices.
    Explicitly disable mouse interactivity when mouse interactivity not needed.
    Do not use Filters.
    Use the most basic DisplayObject needed.
    Reuse Objects whenever possible.
    Event.ENTER_FRAME loops: Use different listeners and different listener functions applied to as few DisplayObjects as possible.
    Use reverse for-loops and avoid do-loops and while-loops.
    Pool Objects instead of creating and gc'ing Objects.
    Strictly type variables whenever possible.
    Use weak event listeners and remove listeners.
    Replace dispatchEvents with callback functions whenever possible.
    Explicitly stop Timers to ready for gc.
      16. Stop Sounds to enable Sounds and SoundChannels to be gc'd.

  • How to optimize the performance of crystal report?

    Hi,
    -I have to design a crystal report with best possible optimization. Optimization is main concern since report will run against 1-2 million data set. Though I am using parameter to fetch only the required data, required data can go till 1 million records.
    -Based on the input passed by the user I have to group the data in report. And for each selected parameter the Detail section I am printing is different. For example:-If user selects store then detail section is different and if user select Host then detail section will be different.
    -Report can be grouped by Time Field also. So to full fill this requirement I would have to create a sub report since other parameters are of string type and can be used in one formula to get parameter based grouping in report. However If I try to return Time filed from the same formula I get the errors the "Return type should be of String typeu201D. This forces me to create sub report for Time based grouping. If user selects Time Field to be grouped on, all the information in the main report gets suppressed and only the sub report gets printed.
    If user select store, Host and User in parameter to be grouped on, sub report gets suppressed.
    Now with the above mentioned points I tried to optimize the report in following way.
    -Printing 1 million records in the report does not make sense; hence we wanted to show the summary of all the records in chart section but wanted to print just 5000 records in detailed section. Suppressing detailed section after 5000 records does not help much since suppressing just saves the time in printing and does not limit the number of records to be fetched from the DB.I have a subreport also so it fetches the data 2 times from the DB hence makes the performance of the report worse.
    To solve this problem I used command object and put the charts in the subreport and detail in main report.
    In main report's Command Object I limited the number to records to be fetched from the DB to 5000 using rownum<5000 but in subreport's Command Object I did not set any limit in the query but I am doing all my aggregation in SQL which means do summary operation in DB and get only summarized data from DB.
    -To solve section problem I am using Template object (new feature added in CR 2008).In which I am returning the field based on the "Group By" parameter selected by user.
    -For time Field I have created two sub reports, one for chart and other one for details in the same way described in point one(Printing 1 million recordsu2026u2026).
    After implementing these points my crystal reports performance improved drastically. The report that was taking 24 minute to come back now taking only 2 minutes.
    However I want my report to come back with one minute. It returns if I remove the sub reports for Time Based Grouping but I can not do so.
    My questions here are,
    -Can I stop Subreport from fetching the data from DB if itu2019s suppressed?
    -I believe using Conditional Template Object is a better option rather than having multiple detailed sections to print the data for a selected Group. However any suggestion here to improve the performance will be appreciable.
    -since crystal report does not provide any option to limit the number of records to be fetched from DB, I am forced to use command object with rownum in where condition.
        Please let me know about other option(s) to get this done...If there is any.
    I am using Crystal report 2008.And we have developed our application the use JRC to export crystal report in PDF.
    Regards,
    Amrita
    Edited by: Amrita Singh on May 12, 2009 11:36 AM

    1) I have to design a crystal report with best possible optimization. Optimization is main concern since report will run against 1-2 million data set. Though I am using parameter to fetch only the required data, required data can go till 1 million records.
    2) Based on the input passed by the user I have to group the data in report. And for each selected parameter the Detail section I am printing is different. For example:-If user selects store then detail section is different and if user select Host then detail section will be different.
    3) Report can be grouped by Time Field also. So to full fill this requirement I would have to create a sub report since other parameters are of string type and can be used in one formula to get parameter based grouping in report. However If I try to return Time filed from the same formula I get the errors the "Return type should be of String typeu201D. This forces me to create sub report for Time based grouping. If user selects Time Field to be grouped on, all the information in the main report gets suppressed and only the sub report gets printed.
    If user select store, Host and User in parameter to be grouped on, sub report gets suppressed.
    Now with the above mentioned points I tried to optimize the report in following way.
    1) Printing 1 million records in the report does not make sense; hence we wanted to show the summary of all the records in chart section but wanted to print just 5000 records in detailed section. Suppressing detailed section after 5000 records does not help much since suppressing just saves the time in printing and does not limit the number of records to be fetched from the DB.I have a subreport also so it fetches the data 2 times from the DB hence makes the performance of the report worse.
    To solve this problem I used command object and put the charts in the subreport and detail in main report.
    In main report's Command Object I limited the number to records to be fetched from the DB to 5000 using rownum<5000 but in subreport's Command Object I did not set any limit in the query but I am doing all my aggregation in SQL which means do summary operation in DB and get only summarized data from DB.
    2)To solve section problem I am using Template object (new feature added in CR 2008).In which I am returning the field based on the "Group By" parameter selected by user.
    Edited by: Amrita Singh on May 12, 2009 12:26 PM

  • How to improve the performance of adobe forms

    Hi,
    Please give me some suggestions as to how to improve the performance of adobe form?
    Right now when I' am doing user events it is working fine for first 6 or 7 user events. From the next
    one it is hanging.
    I read about Wizard form design approach, how to use the same here.
    Thanks,
    Aravind

    Hi Otto,
    The form is created using HCM forms and processes. I' am performing user events in the form.
    User events will doa round trip, in which form data will be sent to backend SAP system. Processing will
    happen on the ABAP side and result will appear on the form. First 6 or 7 user events works correctly,
    the result is appearing on the form. Around 8 or 9th one, the wait symbol appears and the form is not
    re-rendered. The form is of size 6 pages. The issue is not coming with form of size 1 page.
    I was reading ways to improve performance during re-rendering given below.
    http://www.adobe.com/devnet/livecycle/articles/DynamicInteractiveFormPerformance.pdf
    It talks about wizard form design approach. But in SFP transaction, I am not seeing any kind of wizard.
    Let me know if you need further details.
    Thanks,
    Aravind

  • How to measure the performance of sql query?

    Hi Experts,
    How to measure the performance, efficiency and cpu cost of a sql query?
    What are all the measures available for an sql query?
    How to identify i am writing optimal query?
    I am using Oracle 9i...
    It ll be useful for me to write efficient query....
    Thanks & Regards

    psram wrote:
    Hi Experts,
    How to measure the performance, efficiency and cpu cost of a sql query?
    What are all the measures available for an sql query?
    How to identify i am writing optimal query?
    I am using Oracle 9i... You might want to start with a feature of SQL*Plus: The AUTOTRACE (TRACEONLY) option which executes your statement, fetches all records (if there is something to fetch) and shows you some basic statistics information, which include the number of logical I/Os performed, number of sorts etc.
    This gives you an indication of the effectiveness of your statement, so that can check how many logical I/Os (and physical reads) had to be performed.
    Note however that there are more things to consider, as you've already mentioned: The CPU bit is not included in these statistics, and the work performed by SQL workareas (e.g. by hash joins) is also credited only very limited (number of sorts), but e.g. it doesn't cover any writes to temporary segments due to sort or hash operations spilling to disk etc.
    You can use the following approach to get a deeper understanding of the operations performed by each row source:
    alter session set statistics_level=all;
    alter session set timed_statistics = true;
    select /* findme */ ... <your query here>
    SELECT
             SUBSTR(LPAD(' ',DEPTH - 1)||OPERATION||' '||OBJECT_NAME,1,40) OPERATION,
             OBJECT_NAME,
             CARDINALITY,
             LAST_OUTPUT_ROWS,
             LAST_CR_BUFFER_GETS,
             LAST_DISK_READS,
             LAST_DISK_WRITES,
    FROM     V$SQL_PLAN_STATISTICS_ALL P,
             (SELECT *
              FROM   (SELECT   *
                      FROM     V$SQL
                      WHERE    SQL_TEXT LIKE '%findme%'
                               AND SQL_TEXT NOT LIKE '%V$SQL%'
                               AND PARSING_USER_ID = SYS_CONTEXT('USERENV','CURRENT_USERID')
                      ORDER BY LAST_LOAD_TIME DESC)
              WHERE  ROWNUM < 2) S
    WHERE    S.HASH_VALUE = P.HASH_VALUE
             AND S.CHILD_NUMBER = P.CHILD_NUMBER
    ORDER BY ID
    /Check the V$SQL_PLAN_STATISTICS_ALL view for more statistics available. In 10g there is a convenient function DBMS_XPLAN.DISPLAY_CURSOR which can show this information with a single call, but in 9i you need to do it yourself.
    Note that "statistics_level=all" adds a significant overhead to the processing, so use with care and only when required:
    http://jonathanlewis.wordpress.com/2007/11/25/gather_plan_statistics/
    http://jonathanlewis.wordpress.com/2007/04/26/heisenberg/
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • Do you have an idea how to improve the performance ?

    Hi All,
    Greeting,
    I'm doing SEM IP. Regarding the performance, do you have some thought about this ?
    So I have planning report for project report . As we know, if we forecast against project, means the date itself is the life of the project itself.
    It means it could be more than 10 years (forecast period) and 10 years (actual period). Currently I segregate between actual and forecast into different info cube .
    But the performance of the planning report is slow now. Do you have an idea about this how to increase the performance. The performance I mentioned here is when we're going to the report (after putting in the value in the selection screen).
    The other question, at this moment, I have a multiprovider than this multi provider consist 2 info cubes ( actual and forecast ). Than my aggregation is sitting on top of that multi-provider .
    My question whether that's approach correct or not ? Or do we have to create 1 aggregate (only for forecast), than I have multi-provider consisting forecasting aggregation and actual cube .
    than my query will sit on top of that multi-provider ?
    Which one is better ??
    Thanks a lot all,
    really need your help,

    Hi,
       For the performance tuning, you can consider any of the following three methods,
    1. Indices
    With an increasing number of data records in the InfoCube, not only the load but also the query performance can be reduced. This is attributed to the increasing demands on the system for maintaining indexes. The indexes that are created in the fact table for each dimension allow you to easily find and select the data.
    2. Partitioning
    By using partitioning you can split up the whole dataset for an InfoCube into several, smaller, physically independent and redundancy-free units. Thanks to this separation, performance is increased when reporting, or also when deleting data from the InfoCube.
    3. Aggregates 
    Aggregates make it possible to access InfoCube data quickly in Reporting. Aggregates serve, in a similar way to database indexes, to improve performance.
    4. Compressing the Infocube
    Infocube compression means aggregation of the data ignoring the request idu2019s. After compression, the system need not perform aggregation using the request ID every time you execute a query.
    And I feel that as per your scenario, you need to do first compress the data based on user requirements and have only the required data in the infocube.
    And for the approach regarding the Aggregation level design, choosing between the two approaches depends on the user requirements. For example,
    If you have aggregation level created on top of multiprovider containing actual and forecast cube, in your report (created on top of aggregation level) you can view the key figure values present in both the cubes, which is not possible in the other approach.
    So this approach is suited if your requirement is to view the records from both the cubes in your report (Comparing planning and actual values).
    The second approach is used if your requirement is only to report on planning forecast cube.
    Hopes this solves your issue.
    Regards,
    Balajee

  • How to Improve the performance in Variable Selection Screen.

    Hi,
    In Query Level we have Variable " User entry Defalt Valu". User want select particular value when he press "F4" it's take hours time how to improve the performance in Varaible Selection Screen.
    Thanks in Advance.
    Regards,
    Venkat.

    Dear Venkat.
    You please try the following steps:
    1. Say the InfoObject is 0EMPLOYEE against which you have created the variable, which user is trying to select value against, when they execute the report.
    2. Goto RSA1-> InfoObject tab-> Select InfoObject 0EMPLOYEE.
    3. Selcet the following options:
       Query Execution Filter Val. Selectn  -  'Only Posted Value for Navigation'
       Filter Value Repr. At Query Exec. -      'Selector Box Without Values'
    Please let me know if there is any more issue. Feel free to raise further concern
    Thnx,
    Sukdev K

  • How to improve the performance of one program in one select query

    Hi,
    I am facing performance issue in one program. I have given some part of the code of the program.
    it is taking much time below select query. How to improve the performance.
    Quick response is highly appreciated.
    Program code
    DATA: BEGIN OF t_dels_tvpod OCCURS 100,
    vbeln LIKE tvpod-vbeln,
    posnr LIKE tvpod-posnr,
    lfimg_diff LIKE tvpod-lfimg_diff,
    calcu LIKE tvpod-calcu,
    podmg LIKE tvpod-podmg,
    uecha LIKE lips-uecha,
    pstyv LIKE lips-pstyv,
    xchar LIKE lips-xchar,
    grund LIKE tvpod-grund,
    END OF t_dels_tvpod,
    DATA: l_tabix LIKE sy-tabix,
    lt_dels_tvpod LIKE t_dels_tvpod OCCURS 10 WITH HEADER LINE,
    ls_dels_tvpod LIKE t_dels_tvpod.
    SELECT vbeln INTO TABLE lt_dels_tvpod FROM likp
    FOR ALL ENTRIES IN t_dels_tvpod
    WHERE vbeln = t_dels_tvpod-vbeln
    AND erdat IN s_erdat
    AND bldat IN s_bldat
    AND podat IN s_podat
    AND ernam IN s_ernam
    AND kunnr IN s_kunnr
    AND vkorg IN s_vkorg
    AND vstel IN s_vstel
    AND lfart NOT IN r_del_types_exclude.
    Waiting for quick response.
    Best regards,
    BDP

    Bansidhar,
    1) You need to add a check to make sure that internal table t_dels_tvpod (used in the FOR ALL ENTRIES clause) is not blank. If it is blank skip the SELECt statement.
    2)  Check the performance with and without clause 'AND lfart NOT IN r_del_types_exclude'. Sometimes NOT causes the select statement to not use the index. Instead of 'lfart NOT IN r_del_types_exclude' use 'lfart IN r_del_types_exclude' and build r_del_types_exclude by using r_del_types_exclude-sign = 'E' instead of 'I'.
    3) Make sure that the table used in the FOR ALL ENTRIES clause has unique delivery numbers.
    Try doing something like this.
    TYPES: BEGIN OF ty_del_types_exclude,
             sign(1)   TYPE c,
             option(2) TYPE c,
             low       TYPE likp-lfart,
             high      TYPE likp-lfart,
           END OF ty_del_types_exclude.
    DATA: w_del_types_exclude TYPE          ty_del_types_exclude,
          t_del_types_exclude TYPE TABLE OF ty_del_types_exclude,
          t_dels_tvpod_tmp    LIKE TABLE OF t_dels_tvpod        .
    IF NOT t_dels_tvpod[] IS INITIAL.
    * Assuming that I would like to exclude delivery types 'LP' and 'LPP'
      CLEAR w_del_types_exclude.
      REFRESH t_del_types_exclude.
      w_del_types_exclude-sign = 'E'.
      w_del_types_exclude-option = 'EQ'.
      w_del_types_exclude-low = 'LP'.
      APPEND w_del_types_exclude TO t_del_types_exclude.
      w_del_types_exclude-low = 'LPP'.
      APPEND w_del_types_exclude TO t_del_types_exclude.
      t_dels_tvpod_tmp[] = t_dels_tvpod[].
      SORT t_dels_tvpod_tmp BY vbeln.
      DELETE ADJACENT DUPLICATES FROM t_dels_tvpod_tmp
        COMPARING
          vbeln.
      SELECT vbeln
        FROM likp
        INTO TABLE lt_dels_tvpod
        FOR ALL ENTRIES IN t_dels_tvpod_tmp
        WHERE vbeln EQ t_dels_tvpod_tmp-vbeln
        AND erdat IN s_erdat
        AND bldat IN s_bldat
        AND podat IN s_podat
        AND ernam IN s_ernam
        AND kunnr IN s_kunnr
        AND vkorg IN s_vkorg
        AND vstel IN s_vstel
        AND lfart IN t_del_types_exclude.
    ENDIF.

  • How to increase the performance of a report

    can any body tell me how to increase the performance of a report?////
    i have prepared a report to show the expense detail .I have used BSIS and BSAS table.
    But whenever I am executing it is facing runtime error (TIME_OUT error ).
    Moderator Message: Duplicate Post. Read my comments in your previous thread.
    Edited by: kishan P on Nov 25, 2010 1:38 PM

    Please SEARCH in SCN before posting.
    Also post performance related issues here.

  • How to increase the performance in server 2008 R2 for RDP users

    Hi,
    My application take to much time to load. If anyone double click on mail client the exe file will appear in task manager but it will open after 5 mins. how to increase the performance.
    My sever configuration is as below,
    SC2600 Intel  motherboard with total 24 core processors and 32 GB RAM and 8 TB Hard Disk. RAID 5 is configured which has two lungs one is 167 GB for C drive and other is 4.5 TB for D drive.
    There are 28 Thin-clients connected to server through L300 N computing Thin-clients.
    Thin-clients connect to V-space server installed in server for RDP users to get connected.
    we have installed around 20 applications including printer and scanner driver. And apps are has below,
    Firefox browser, windows mail, Adobe acrobat XI, canon printer and scanner drivers, Epson printer and scanner driver, E scan anti-virus, office 2007, v space, power ISO, win-rar,Tally and e token drivers and some backup software's.
    Below  are the services and features enabled,
    AD, File services, RDP, web server, Hyper-v, .net frame work.
    Is there a way to increase the performance .
    Very slow performance.

    Hi,
    what would you suggest on  hardware configuration must be for  above mentioned applications and services with those many users.
    how many cores and ram size is required.

  • How to increase the performance of a program

    How to increase the performance of a program.
    Regards
    Lisa
    Message was edited by: Lisa Roy

    Here are some links that may help.
    http://www.sapinsideronline.com/searchspi/search.htm?page=article&key=20297&query_text=performance%7Ctuning
    http://www.sapinsideronline.com/searchspi/search.htm?page=article&key=44221&query_text=performance%7Ctuning

  • How to increase the performance of  Weblogic server 7.0?

    How to increase the performance of Weblogic server 7.0 ?
    also, how do i avoid typing the server login and password evertime I start the
    webserver?

    How to increase the performance of Weblogic server 7.0 ?It depends on what is not running fast enough for you.
    also, how do i avoid typing the server login and password evertime I
    start the webserver?In the startWebLogic shell script (.cmd or .sh) add:
    set WLS_USER=weblogic
    set WLS_PW=password
    (Replace "password" with whatever your password is.)
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com/coherence.jsp
    Tangosol Coherence: Clustered Replicated Cache for Weblogic
    "winston" <[email protected]> wrote in message
    news:3fe42d33$[email protected]..
    >

  • How to test the performed  SAP SCRIPT

    Hi friends can any one help for
    how to test the performed  SAP SCRIPT. What are the necessary codes or anything else for performing it

    Praveen,
    Can you be much clear with your query? What do you mean by performing? Do you mean how to execute it ?
    Regards,
    Vinod.

  • How to improve the performance of Standard Extractors

    Hi All,
    Can you please let me know how to monitor the performance of Standard Extractors. For one of the extractor which have 350K records in source, it is taking 4hrs to load to BI.
    I want to know which part of the program is taking more time.
    Thanks in Advance
    RK

    No, that exception is thrown when the underlying
    socket (tcp/ip) implementation cannot reserve buffer
    space for new sockets afaik. I get it on windows
    machines when the concurrent connection load reaches
    17-18k connections. I do believe it's configurable
    though.And what happens if your max server load is 7-8 connections an hour and you never close the connections?

  • How to improve the performance of the abap program

    hi all,
    I have created an abap program. And it taking long time since the number of records are more. And can anyone let me know how to improve the performance of my abap program.
    Using se30 and st05 transaction.
    can anyone help me out step by step
    regds
    haritha

    Hi Haritha,
    ->Run Any program using SE30 (performance analysis)
    Note: Click on the Tips & Tricks button from SE30 to get performance improving tips.
    Using this you can improve the performance by analyzing your code part by part.
    ->To turn runtim analysis on within ABAP code insert the following code
    SET RUN TIME ANALYZER ON.
    ->To turn runtim analysis off within ABAP code insert the following code
    SET RUN TIME ANALYZER OFF.
    ->Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
    ->Avoid for all entries in JOINS
    ->Try to avoid joins and use FOR ALL ENTRIES.
    ->Try to restrict the joins to 1 level only ie only for tables
    ->Avoid using Select *.
    ->Avoid having multiple Selects from the same table in the same object.
    ->Try to minimize the number of variables to save memory.
    ->The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
    ->Avoid creation of index as far as possible
    ->Avoid operators like <>, > , < & like % in where clause conditions
    ->Avoid select/select single statements in loops.
    ->Try to use 'binary search' in READ internal table. -->Ensure table is sorted before using BINARY SEARCH.
    ->Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
    ->Avoid using ORDER BY in selects
    ->Avoid Nested Selects
    ->Avoid Nested Loops of Internal Tables
    ->Try to use FIELD SYMBOLS.
    ->Try to avoid into Corresponding Fields of
    ->Avoid using Select Distinct, Use DELETE ADJACENT
    Check the following Links
    Re: performance tuning
    Re: Performance tuning of program
    http://www.sapgenie.com/abap/performance.htm
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    check the below link
    http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
    See the following link if it's any help:
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    Check also http://service.sap.com/performance
    and
    books like
    http://www.sap-press.com/product.cfm?account=&product=H951
    http://www.sap-press.com/product.cfm?account=&product=H973
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    Performance tuning for Data Selection Statement
    http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
    Debugger
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    Run Time Analyser
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
    SQL trace
    http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
    CATT - Computer Aided Testing Too
    http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
    Test Workbench
    http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
    Coverage Analyser
    http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
    Runtime Monitor
    http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
    Memory Inspector
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
    ECATT - Extended Computer Aided testing tool.
    http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
    Just refer to these links...
    performance
    Performance
    Performance Guide
    performance issues...
    Performance Tuning
    Performance issues
    performance tuning
    performance tuning
    You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
    edited by,
    Naveenan

Maybe you are looking for