Toshiba Media Controller is not working on Satellite P850-12Z and Win7

Hi
I have a problem with the program Media Controller, not get it to work at all, I have a Sony Bravia with wifi, try to share music and video and always says "remote media library did not allow the connection".
How I can fix it, also say that when you try to play a file in the context menu "Play on" attempts to connect to the server but never connects.

+To stream your media, you need the following hardware and software:+
A wired or wireless private network.
Your PC needs to be connected via a broadband router.
Your devices must be on the same subnet as your computer.
The network location must be set to Home network.
Either another computer on your network or a device known as a Digital Media Renderer (DMR) must be present. DMR are hardware devices connected to your wired or wireless network that you can control using your computer.
+To open Media Controller to allow enabling / disabling (not recommended):+
1. Click the Start menu.
2. Enter "Controller" into the search field.
3. Click "Media Controller" in the search results.
4. TOSHIBA Media Controller will open allowing you to setup sharing options.
5. Follow the on-screen prompts to set up file sharing.
6. For more information about setting up devices on your network, refer to the online help for Microsoft Windows 7 Operating System:
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extender
*More info:*
http://aps2.toshiba-tro.de/kb0/FAQ2503AX0000R01.htm

Similar Messages

  • Ethernet Controller is not working on Satellite L645D-S4030

    Basically i got my windows 7 reinstalled on to my laptop because of viruses......Now I have a issue with the Ethernet controller not working, I checked my device manager and there's some kind of yellow dash across the icon......Anyone know what the problem is and how i can fix this problem ????
    BTW i have a SATELLITE L645D-S4030

    Hi buddy,
    Hmm Usually if you reinstall Windows from Toshiba recovery disk all drivers will be installed too because the disk contains an image of factory settings.
    Or have you used another disk?
    Yellow exclamation mark could mean there is a driver issue so it would be recommendable reinstalling the LAN driver. Follow the link posted Timox. After installing the driver restart your computer and check device manager again. Normally the yellow exclamation mark should be vanished.

  • Media buttons do not work in Satellite P300-21E using Win 7

    Hello,
    after shutting down my laptop, one week ago, the media buttons suddenly stopped working.
    The weird thing is that they are flashing all the time, even when the laptop is off.
    I downloaded the VAP from toshiba website (although the version was a 2009 one, if there is a new one for my laptop please let me know. Maybe I can use a VAP of a similar model.
    My system is Windows 7
    the other weird thing is that I disabled the illumination option from the F2 setup but the media buttons are still on.
    I also tried to take the battery off, etc but nothing
    any ideas?

    Hi
    The VAP is an Toshiba software and as far as I know you can use the other version of VAP which was released for other notebook series.
    For example you could use the VAP released for Satellite P500, P750 series or higher.
    But Im wondering why the buttons led is still ON even if the Illumination is disabled in BIOS.
    > I also tried to take the battery off, etc but nothing
    This was also my idea disconnect AC adaptor, remove battery, press and hold power button 30sec long.
    Then connect the AC adaptor and check the Multimedia button functionality.

  • ITunes 11 media controls are not working on Windows 8.1 and more.

    The iTunes team might be distracted or something...

    GUYS I FOUND THE FIX FOR THIS AND IT ACTUALLY WORKS YAY!!
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    Worked for me, so happy! Hope it does for all you lot too!

  • HP 8600 Printer setting changes do not work with internet explorer v11 and win7

    I can connect to my printer using my IP address in ie 11, and i can look at lots of things, but if i attempt to change something simple, like the time, i get an error message back that says invalid input.  However, if i use Firefox v26.0, it works fine.  I have the latest drivers installed on my laptopt.  can this be resolved?   I have to do this from time to time because the clock on the printer does not keep the correct time.  Apparently, there is no fix for that.  (other than manually  adjusting it from time to time)
    This question was solved.
    View Solution.

    Hi,
    Open IE 11 internet options and place the printers EWS IP address in the compatibilty view section. You can then save changes
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • Adobe Flash Player is not supported by TOSHIBA Media Controller

    When I try to play videos from Youtube a message appears saying: "Adobe Flash Player installed on your computer is not supported by TOSHIBA Media Controller. Launching of TOSHIBA Media Controller was not successful." Music doesn't play either - error on page. Earlier it was ok, don't know what happened. Could you, please, advise?

    did a search on Toshiba Media Controller and it's software that let's you share content with networked devices.  are you playing youtube videos from a browser and seeing this error?  if yes, quit out of the Toshiba Media Center application and see if this resolves the issue...

  • Satellite A660-11M on Windows 7 - Toshiba Power Saver does not work

    I have a Satellite A660-11M and I work on Windows 7 Ultimate
    The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!

    Toshiba Power Saver is only for XP installations, you can't install the XP Drivers (and most Vista Drivers) in Windows 7.
    Make sure all your drivers are for the A660, and make sure they are for Windows 7.

  • Adobe Flash Player and Toshiba Media Controller Plug-In Problem

    Hello,
    Every time I try to upload photos , I get this error:
    The adobe flash player installed on your PC is not supported by toshiba media controller plug-in. Toshiba media controller plug-in failed to start. I have tried reinstalling Adobe as well as the media controller plug-in, and I still get this error. Can someone help?

    I get that message when trying to watch the Olympics on Television fantastics London Games app.  The media controller is in the latest laptops so I thought it was a program. Guess not. I can't find one for sale on my comp. Does anyone know where I should go?

  • Windows media player will not work as no DVD driver

    Had to format disk (trojan) & reinstall Windows XP home. Now Windows media player will not work as no DVD Driver, can I download from Toshiba site?

    Hi
    Usually the Windows media Player is not able to play DVD movies IF no plug-ins were installed.
    To watch DVD movies you can use the programs like WinDVD or PowerDVD.
    Such programs were designed especially for the DVD playing!
    But you can also visit the Microsoft website and search for plug-ins for Windows Media player.
    Then you could download and install it to play DVD with WMP
    Best regards

  • Media burner is not working in 4s what to do next

    media burner is not working in 4s what to do next

    As when there is a problem with a 3rd party app on your computer, contact the app developer for Media Burner regarding a problem with their iPhone app.

  • Media Encoder CS6 not working with Premiere

    Hi
    I have been merrily editing a lager job in Adobe Premiere CS6 and then queuing the time lines to export in media encoder CS6 done the entire job everything rendered fine then Bam all of a sudden when I try and render I get all the audio a couple of frames of video then just black!!
    I have tried different codecs same result, I have tried different timelines same result, When I export directly out of Premiere without going through Media encoder all works fine, when I try encoding a file directly in media encoder works ok, It just seems to be the link between Premiere and Media encoder that not working as it should
    Anyone got any ideas?
    Hi Folks
    Has no one had an issue exporting to Media encoder from Adobe Premiere CS6?

    Any chance this gets fixed soon?  I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio.  I've also noticed the video jumps around even when it does have audio.  Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually.  I've also tried just dropping the file structure from the card straight to the hard drive.  It's a huge problem, and is keeping me from making the switch fully from FCP 7. 

  • Controller is not working custom Region

    Hi ,
    I am working on customization of OA pages ,IMCAccountOverviewEditPG, on Oracle customer online.The requirement is to add a new advance table region on at the bottom of this page. The application is on 11.5.10 2CU .
    So here is test that i tried
    CUSTOM REGION:
    1) I have created a indepedent test region EQXAccountContactRN of type MessageCOmponenetLayout. Under that i have created Mesage layout. Under this region i have created a message text input and a submit button.
    I have attached a controller EQXAccountContactRNCO with EQXAccountContactRN which is just Helloworld program.
    Using XML import i have imported this test region. Import works fine.
    /oracle/apps/imc/customer/account/createupdate/webui/
    I have also copied the controller in the EQXAccountContactRNCO.class in the above server webui folder
    ATTACHING THE CUSTOM REGION USING PERSONALIZATION:
    2) Using personalization on IMCAccountOverviewEditPG page, i have created an item of "Flexible Layout" type.
    2)I have added "Flexible content" region unde the Flexible Layout using personalization which extend EQXAccountContactRN created in step one.
    3) I have bounced the apache and looked into the IMCAccountOverviewEditPG page, I can see my Custom SO FAR SO GOOD.
    4) But The controlller EQXAccountContactRNCO ,associated with the EQXAccountContactRN custom page is not working. I have put a test code both in the processRequest() and PrcessFormRequest both are not working.
    A) Can you please tell me why the custom controller is not working ?
    B) Also the flexible content region do not shows the custom controller , all it show is following controller.
    oracle.apps.fnd.framework.webui.OAFlexibleLayoutCO 115.12
    oracle.apps.fnd.framework.webui.OAFlexibleContentCO 115.12

    Also if some one knows a better appoach to modify a exisitng page, please comment here.

  • Toshiba 2.5'' HDD Not Working

    Friends,
    Need your valuable help and advice to resolve my challenge faced. My HDD made of Toshiba (2.5') is not working , it is also not showing under Diskpart option and while seeing this as USB drive in another computer system , it shows message "Not initialized" , when i tried to make it initialized, it returned error as "i/o error" . Also it is not able to format , not able to create partition. I tried all tricks which i learnt , but all in vein. 
    Please help.

    It sounds like the drive might have failed unfortunately.
    - Peter

  • Windows media player is not working

      windows media player is not working  while i am playing any audio/video. it is saying    server execution is failed

    Please post your Product number (please don’t post your serial number).
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • PS4 controller mic not working

    Hi
    I've had my PS4 since day 1 release and same controller until just few days ago when i noticed rubber was coming off bad from the thumbsticks and the audio jack the sound wasn't working as normal, it was coming out the headset very low and at like a different pitch or tinny/distorted (if that makes sense) and people could no longer hear me and they said there was an echo or something. So I bought a new controller (black) and I can hear sound (gameplay and people talking in game chat and party chat) but it doesn't pick up my voice no one can hear me, went back to the shop and had the remote replaced and the same thing with the new replacement (black), funny thing is though, my sisters remote from her white PS4 works with my console and the headset mic works perfectly, sound comes in and it recognises my voice and people can hear me, I can press L2 on the main and use my voice to start the game or whatever. I tried deleting and repairing the controllers, i tried pressing the reset button on the back of controllers, checked that its pushed in all the way, half way, tried turning it, nothing worked.I contacted sony support and they can't help me cos its third party devices being used with the controller.
    What i usually used was beats solo 2 headset or iphone earphones.
    Am I getting faulty controllers?
    BEFORE saying my mic is the problem, why is my headset working on my sisters white controller but not working on the 2 new black controllers? Thanks.

    I think we need to start a list of complete let down threads. I thought this was some type of support group.

Maybe you are looking for

  • Can't get past the blue screen of death

    I woke up this morning to discover my computer froze on the screensaver sometime last night. I restarted and after the grey apple screen got a blue screen which shifted to a lighter blue screen with the mouse cursor and it never moves beyond that. My

  • Error:"Add on  executable file not found"

    hi How to solve "Error:"Add on  executable file not found"" while adding add ons in sap b1 Edited by: Philip Eller on Jun 16, 2008 10:13 AM Edited by: Philip Eller on Jun 30, 2008 10:02 AM*

  • EPM 11.1.2

    Hi All, Every thing is configured without any error. I have palanning and Foundation services on different linux boxes. when in trying to open planning application from workspace, its giving an error: 1) Invalid or could not find the module configura

  • Problem in Generating the Infoset report(two ODS joining)

    I am facing the problem in ODS infoset report. Consider the two ODS (ie ODS1,ODS2) <b>ODS A</b> <b>A     B     Sal1(KF1)</b> 1     10    10,000 2     10     20,000 Here A is the Keyfield of ODS A (all A,B, Sal1 are infoobjects). <b>ODS B</b> <b>B   

  • How do i deleat songs from my ipad & iphone

    How do I deleat songs  from my ipad and iphone. They are downloaded from itune. Thanks