Toshiba NB200-10z - recovery disc creator.lnk isn't available

Hello, I have a problem with my netbook Toshiba NB200-10z, when I run Toshiba recovery disc creator I get the window with:
The unit or network connection to which the link refers "recovery disc creator.lnk isn't available.
Make sure that the disk is properly inserted or the network resource is available and try again
How can I fix it?

Since this is an English language forum you should post the message in English language.
I assume you are not able to start the Recovery disk creator software
Why?? Who knows.
Try to recover the notebook using HDD recovery option:
Press F8, choose Repair my Computer, and HDD recovery.
If this would not be available or possiblewell you will need to try to order a recovery disk from Toshiba or would try to install the system using another disk

Similar Messages

Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not run correctly

Hi,
I am trying to create a recovery disc for my Toshiba Satellite L500D PSLK0A-00U009.
When I run the Recovery Disc Creator it begins to open then it comes up with a box with an exclamation mark then it says 'Can not open target partition'. Then the Recovery Disc Creator will open. It then appears normal then when I insert a CD to being the process it looks as though it is going to work then it says Error and stops and ejects the CD the Error is code is: 0E01B5-26-510444D9
I have already uninstalled then program then reinstalled it using a download from the MyToshiba website and this did not fix the problem.
Any suggestions?

Hi
Did you try different disks from different manufactures?
How about the usage of USB flash memory stick? As far as I know you can create an bootable USB Recovery flash stick too.

Cannot start Toshiba Recovery Disc Creator on my Satellite A300-15K

Hi! I'm from Poland so my English is a little poor.. (but I hope that is sufficient)
My problem:
I haven't Recovery disc (DVD) because I don't use earlier Toshiba Recobery Disc Creator (when all in my laptop was good).
Now I haven't do this disc because when I start Toshiba Recovery disc Creator I have a error:
" Program Launch RDC and create INI files for RDC Recovery partition _przesta? dzia?a? (ceased to operate)_
error details:
Nazwa zdarzenia problemu: APPCRASH
Nazwa aplikacji: TRORDCLauncher.exe
Wersja aplikacji: 1.0.0.1
Sygnatura czasowa aplikacji: 4682674e
Nazwa modu?u z b??dem: WIMGAPI.DLL
Wersja modu?u z b??dem: 6.0.6001.18000
Sygnatura czasowa modu?u z b??dem: 4791a7a6
Kod wyj?tku: c0000135
Przesuni?cie wyj?tku: 00009cac
Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
Identyfikator ustawie? regionalnych: 1045
Dodatkowe informacje 1: 9d13
Dodatkowe informacje 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Dodatkowe informacje 3: 9d13
Dodatkowe informacje 4: 1abee00edb3fc1158f9ad6f44f0f6be8
Przeczytaj nasze zasady zachowania poufno?ci informacji:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0415

Hi
Did you change anything on your notebook?
I mean if your HDD recovery partition has been changed or the data o thin partition has been deleted?
To be honest for me it looks like the OS issue. I think its not a single tool issue but I think the operating system has been muddled up
Maybe you should try to recover the notebook using the Toshiba HDD recovery option and after the new OS installation on the notebook you could try to create the recovery disk again.
In order to start the recovery you have to press the F8 immediately after the notebook has been powered up. Then you should choose the first option called Repair My Computer.
This would lead to a new window and there you could choose Toshiba HDD recovery.
But note; this recovery would format the whole HDD so maybe you should backup some data before you would start this procedure.

Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

Hello,
I am sorry for bad English.
Satellite A300.
Conducted updating to Win7 on the program Toshiba Upgrade.
Does this program work;
TRDC Reminder and Toshiba Recovery Disc Creator after updating to Wins7?
The program TRDCReminder did not find "Renewal of computer".
On the program Toshiba Recovery Disc Creator was created and that incomprehensible?
If is not it these programm how to recover computer in the case of failure?
Does Tempro work in Win7?
Many thanks.
With kind regards.
Igor.

Good evening.As*** - Enormous thank you for an answer.Before updating to W - s7, I created disks reanimator with Vista.Is there a question in that, how to create the disks of reanimator on W - s7? in default of the corresponding programs?I understood that in the case of accident:1.Restore to Vista 2.Repeatedly to set W - S7 ?Really are not there other paths?On Vista the system was reinstalled from a hard disk.There was possibility to create the disk of renewal.W - S 7 AS ? Tempro after a refixturing ?????:To run out term of guarantee, did 6 months pass ? Enormous Thank you for patience. With kind regards. Igor

Recovery Disc Creator does not list any discs for creation

Brand new NB200-10G (this a UK model). When I run TOSHIBA Recovery Disc Creator it does not show any discs for creation and the CREATE option is greyed out so I cannot create the discs. Now... when I first got it I did not have a USB DVD writer with me but I ran RDC out of curiosity to see the devices it might offer. At that time it DID list discs to be created but I cancelled out. I get the impression the program thinks it has created the discs and I believe I read somewhere that it will not create the discs more than once. I think it must have set a switch in the registry or .ini files somewhere to indicate that the discs have been created. If so does anyone know how to "undo" this? Drive D (data) and hidden partition *appear* to be intact.
If this is not possible then I guess I could try the "press key 0 at power up" method to restore to original install setting and this might then enable me to create the discs but I'm concerned that if the restore fails in a destructive way that I might be left without a working PC. TIA Ken
Solved!
Go to Solution.

OK all fixed!
Restore using key 0 at power up worked fine and cured the ToRDC problem. It then let me produce 2 copies of the restore DVD. Don't know what caused the problem... issue CLOSED.
Ken

Satellite U400 Impossible to create recovery DVD with Recovery disc creator

Hi,
I have a Satellite U400 (few years old), and I never created the recovery DVD.
Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?
Thanks for your help.

It is big problem now if the Toshiba tool cannot find the files.
How it works you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985
Check it out please.
What you can try now is to check if HDD recovery installation will start - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm but Im afraid the same problem will occurs again.
To be honest you should install Win7 32bit on this small Satellite notebook. It works perfectly. Forget original Vista OS, Win7 works better.

Re: Recovery disc creator cannot be launched

Hi,
I'm having problem with my recovery disc creator, an error occured "No HDD recovery area!\nThe recovery disc can not be launched." when i'm trying to create a back-up disc.
Need help. What do i need to do?
Many thanks.
kenji
Solved!
Go to Solution.

if you have formatted the disc then you have completely removed the hdd partitions. im sure you have figured this out but im going to say it anyway. this is the exact reason your toshiba user's guide tells you to make recovery media first before anything else is done on the laptop. with that out of the way you can order recovery media from toshiba for $25 by calling 1(800)457-7777 or ordering online here csd.toshiba.com/cgi-bin/tais/support/jsp/serviceUnitVerification.jsp?orderType=SFF
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

DVD recovery disc creator error

Hiya,
I have a toshiba L300 series laptop running vista, which basically just crashes as soon as I load it up as soon as I try to do anything in normal mode (it runs perfectly in safe mode). I'd like to reboot my system obviously!
Basically when I try to run the recovery disc creator, just over half way through creating the first disc I get the error message:
'Failed to read the following file.
F:\06491XSP.swm
(error code:020150-20-00000000)'
Any help would be much appreciated,
thanks,
Olie

Hi!
Firmware updates you can get on the Toshiba website but for your Satellite A300 with Mat****a drive I didnt find one.
Have you tried DVDs from different manufactures? I use always Verbatim disks and never had problems with it.
Check this!
Bye

Satellite A300D-126 Recovery Disc Creator

Hello,
can anyone tell me from where i can download the recovery disc creator for my toshiba. I have format the laptop and i am running windows xp sp2.
Thank you

I think you have erased the recovery image by formating the laptop. Right?!
But you can order a backup media here

NB200-10Z: Can't make recovery disk using TOSHIBA Recovery Disc Creator

Hi Folks,
I finally got round to buying a USB DVD drive in order to create recovery discs for my NB200-10Z. I got the following:
* Samsung SE-S084C, External USB 2.0 Slimline 8X DVD Writer, Black
I have twice tried to create a recovery disc and am now left with two trashed DVDs. The error codes in the error window are:
Error Code: 0E01B5-26-2A040803
Error code: 02016F-3C-00000000
The first time the burning was stopped, the second time the verify failed.
Can anyone shed light on this?

*Short version:*
Thank you to everybody who replied.
I decided to try out the USB DVD drive on another laptop to perform a HDD backup operation...and it failed as well. Grrrr. Same DVD media (I just hadn't got round to getting new media to try).
I think I shall discount the possiblility of the NB200 being at fault, and therefore shall consider this question answered on this forum.
*Long version:*
Well, I ended up using Virtual CD to "burn" an ISO file to HDD, and then copied that to another laptop to burn to DVD (not using the USB DVD drive, but the same DVD media type). Being the curious type I decided to perform a restore using the USB DVD drive. It got part way through installation then informs me that a CRC check had failed...argggg.
So, to cut a long story even shorter, I ended up slipstreaming the Intel storage drivers into a Win XP ISO (created from a Win XP CD I had from another previous laptop) and creating a bootable USB drive. Now I have a clean install with all the NB200 driver installed. Phew.
Actually, to think a bit more about it, I could have attempted to put the Toshiba recovery ISO onto the bootable USB drive, but I've done the clean install now anyway.
For whatever reason, I had such trouble getting the NB200 BIOS to recognise the USB DVD drive in order to change the boot order (it wasn't in the option list). This was with the DVD in the tray, and without the DVD in the tray. Some investigation required on my part, I think, to determine exactly what is going on.

Tecra A9 - Recovery Disc Creator malfunctioning

I've been trying to make recovery discs for my Tecra A9.
I've successfully made the two System Recovery Discs (DVD-R), but when I try to make the Applications Disc I get a errormessage right after the program wants me to verify that i've put a blank disc into my DVD-writer.
_Errormessage:_
An unexpected error accured.
Please quit this application and restart it.
(Error Code: 0E01C7-15-00000000)

Hi
Maybe you should try different medias
Such error messages appear mostly if an inserted disk was not fully compatible
I assume you have used the same disks previously in order to create the recovery disk well, I know this is strange but I think you should try another disk.
Cheers

HP Recovery Disc Creator Probook 4740s

My company bought a new laptop for me which I have received and configured today
HP Probook 4740s - Windows 7 Professional
I am trying to create a set of recovery discs but it fails with the following error, can some one help me with this issue please.
I have tried running the recovery as the administrator but it made no difference

Hi:
I can't help you with that specific issue, but I would just call HP at this number 1-800-334-5144, and order a set of recovery disks for your notebook.
You will need to provide the model # and serial number.
Since the notebook is presumably under warranty as it is new, HP normally ships the recovery disks at no charge.
When a PC is out of warranty one pays $10 for a set.
Paul

Blank screen on Toshiba NB200 10Z setup

I have turned on my new netbook and the screen lights up, I hear music but nothing happens and the screen remains blank. The power is working and the indicator buttons are all green. Any idea what I can do to set this up?

Hi
Maybe the screen has been switched to external monitor?
Try the FN +F5 key combination.
This allows switching between external and internal display.
If this does not help then I would recommend removing battery and disconnect the AC adaptor for a while wait about 1hour and connect both parts.
Check it.

How can I install new windows on NB200-10z without a CD drive?

Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+

Recovery Disk Creator (Express Media Player)

Hello,
This is my first visit to these forums. I bought my Toshiba Satellite A105-S4284 laptop back in November 2006 from CompUSA. Recently, I had to take my laptop to a local repair shop because I updated McAfee and the desktop froze- this is just some previous info, this problem is fixed. They just backed up my data, then reinstalled the operating system.
I'm trying to create a recovery disk using the pre-install software that came with the laptop. It is called "Recovery Disk Creator (Express Media Player)". I used this in the past many times before I had the problem explained above, but this is the first time I am using it since I pick my laptop up from the repair shop. I get the following error message when I double click on the shortcut icon on the desktop: "Recovery Disc Creator- No compatible Recordable or Rewritable devices could be found on your system." Also, when I use Nero 9 Nero Express I just get failed attempts and the DVD/CD ejects. Both of these worked fine before.
My specs:
Toshiba Satellite A105-S4284
Intel Centrino Duo T 2050 1.6 GHz, 1 GB RAM
Windows XP Media Center Edition Service Pack 2 (both worked before with SP2)
Thank you

If you have used this in the past to create the disks just use one of the previous disks to restore the system. The disk you made previously would be exactly the same as you would create now.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Toshiba NB200-10z - recovery disc creator.lnk isn't available

Similar Messages

Maybe you are looking for