Toshiba NB200 Touchpad Not Smooth?

I bought a Toshiba NB200-10Z this week and I'm pleased with my purchase, very stylish. The only thing is if my fingers are dry the touchpad feels a bit rough in smoothness when gliding your finger across it. But if my fingers have a bit of moisture on its fine and smooth to use. Does anyone else experience this problem? I don't think this is a problem with mine individually I think its the texture of the touchpad.
Thanks,
Ben.

In my opinion NB200 is not some special notebook with special developed hardware and touchpad is not different as on other notebook models from different manufacturers.
At the moment I have three different notebooks in front of me and tochpads on all of them work well and properly.
Try to change settings in mouse properties, especially for sensitivity. Maybe this will help.

Similar Messages

Toshiba NB200 - ZENworks Drivers etc

Machine Specifications
Toshiba NB200
Realtek RTL8101E / 8102E(L) / 8103E(L) PCI-E Ethernet Controller v1.13 (081016)
Novell / Zenworks Software
Currently using ZENworks 7 Suite and the following imaging driver update (August 2009:
NOVELL: Downloads - ZENworks Imaging Driver Update for August 2009
Problem / Fault
Imaging up (to server) or down (to workstation) is very slow.
Error message received when trying to do an image.
Could not find the ZENworks Repository.
Activating manual setup program.
Anthony Hill
ICT Support Officer
[email protected]

anthonywhill,
>Machine Specifications
>Toshiba NB200
> Realtek RTL8101E / 8102E(L) / 8103E(L) PCI-E Ethernet Controller
>v1.13 (081016)
If you do not get an answer here, you might post in the imaging forum.
Jared Jennings
Novell Support Forums Sysop
Senior Systems Architect, Data Technique, Inc.
http://www.datatechnique.com
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org
Twitter@ http://twitter.com/jaredljennings

Toshiba NB200-10z - recovery disc creator.lnk isn't available

Hello, I have a problem with my netbook Toshiba NB200-10z, when I run Toshiba recovery disc creator I get the window with:
The unit or network connection to which the link refers "recovery disc creator.lnk isn't available.
Make sure that the disk is properly inserted or the network resource is available and try again
How can I fix it?

Since this is an English language forum you should post the message in English language.
I assume you are not able to start the Recovery disk creator software
Why?? Who knows.
Try to recover the notebook using HDD recovery option:
Press F8, choose Repair my Computer, and HDD recovery.
If this would not be available or possiblewell you will need to try to order a recovery disk from Toshiba or would try to install the system using another disk

Unable to charge Toshiba NB200 at all

Hi,
I recently bought myself a Toshiba NB200 and after the battery finally ran out, I tried charging it but to no avail. When I plug in the charger, the plug light at the bottom with all the other kinds of lights(HDD light, battery light etc.) shone green whilst the battery light was orange the whole time even though I had left it for a long time. Everytime I tried to turn on the computer whilst 'charging', I could only get as far as the windows start up page when it turns off itself due to low power.
What problem am I experiencing because it seems weird that the plug light is green whilst the battery light is still orange after a long time.
Is there anyway I can solve this problem or any alternative method if this problem can't be solved?
(Well a point to take note of is I bought my laptop in Thailand and it charged well but when I brought the laptop back, I can't charge it but the thing is I've brought my previously Thailand bough laptop back to Singapore and it worked fine, so I do not think its anythign wrong with the laptop being from different country and all)
Thanks in advance to any help. :D

I have a NB200-110 that will no longer charge. I have replaced the battery & AC charger & it still won't charge! I have 26% battery life left before the battery dead & I can't switch it on! Any idea what the problem could be? (if Popsicle could you copy a reply to my email address - [email protected]) thank you

Toshiba NB200 monitor resolution vs photography editing software

Hello,
I'm thinking to buy a Toshiba NB200. The maximum screen resolution is 1024x600. I worj in photography and use Photoshop CS4 and/or Lightroom 2.5, both need 1024x800 minimum resolution. If I use this program in Toshiba NB200 it will make interpolation and pixel (re-)calculation, right? There is a solution, or what photo software do you recommend to use with Toshiba NB200?
Best Regards,
Vasco Neves from Portugal

Hi
Im not a photographer but maybe you can use Photoshop on an external monitor where you can choose a higher screen resolution.
Check this!!!
Alternative you can use GIMP. As far as I know there is no minimum screen resolution.

Toshiba NB200 PLL25A-00K002 Netbook (3G modem)

Hello all,
Firstly my apologies if this information is located somewhere, I have searched Google & the Toshiba site with no luck.
My question is, what modem is in the Toshiba NB200 PLL25A-00K002 Netbook (3G model)?
More specifically what I want to know is if the modem supports the 850MHz or 900MHz 3G frequencies.
In Australia we only use the traditional 2100MHz 3G frequency in the major cities, outside of these area's there is only Telstra's 850MHz or Optus's 900MHz 3G frequencies. This is why I would like to know if it supports either.
Thank you for your time.

UPDATE: I received my Toshiba NB200 PLL25A-00K002 yesterday (finally). I did a scan and have detected 3G 2100MHz Vodafone, Optus & Three/Telstra networks. I can also see "Telstra 3G" which is their 850MHz NextG band - which is great news.
So I guess I can confirm that this model laptop, although it is discontinued, if you can get one will work on Telstra's extended 850MHz 3G NextG network.
There are some cards out now that ALSO support the 900MHz 3G network, but as I am not in an area with this band I can not check this. I would presume due to the age of the Netbook now it would not support this (aka Vodafone / Optus Yes-G extended coverage areas) but when I get a chance to double-check I will and post back here.
I am now working on a fresh re-install and the 3G drivers & utility are not avialable on the standard Australian driver page, if you need these check out the post here:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=196629

Toshiba NB200 ZENworks 7 Novell Netware

Machine Specifications
Toshiba NB200
Realtek RTL8101E / 8102E(L) / 8103E(L) PCI-E Ethernet Controller v1.13 (081016)
Novell / Zenworks Software
Currently using ZENworks 7 Suite and the following imaging driver update (August 2009:
NOVELL: Downloads - ZENworks Imaging Driver Update for August 2009
Problem / Fault
Imaging up (to server) or down (to workstation) is very slow.
Error message received when trying to do an image.
Could not find the ZENworks Repository.
Activating manual setup program.
Anthony Hill
ICT Support Officer
[email protected]

i said that i was trying to modify the bootcd.iso. where would i find those directions?
>>> dmundric<[email protected]> 10/2/2009 12:06 PM >>>
File is located in SYS:TFTP\CMDS directory. If you are trying to mod
the bootcd.iso, that is another matter entirely.
Keith Larson;1865438 Wrote:
> there is no such file inside the bootcd.iso directory structure.
>
>
> >>> dmundric<[email protected]> 10/1/2009 12:16 PM >>>
>
> Hi Keith:
>
> Actually, the change is made to the z_maint.cmd if you are using
> Maintenance Mode and z_auto.cmd if you are using Automatic mode. As
> Anthony points out, just add that newid line to the end of either (or
> both) file with no carriage return. No need to restart ZFD or the
> server, the changes are hot.
>
> Keith Larson;1865326 Wrote:
> > I need to try this with the bootcd.iso I tried putting the same
> changes
> > into isolinux.cfg, but it didn't work for me.
> >
> >
> > >>> anthonywhill<[email protected]> 9/29/2009
> 6:36
> > PM >>>
> >
> > Hi there,
> >
> > I spoke to a lady at Novell and she was able to help with this
> > problem.
> > If you want to talk direct to myself I can give you the information
> > you
> > need.
> >
> > We are using PXE and we did the following:
> >
> > In the following directory there are a couple of CMD files:
> > \\fsbackup1\SYS\tftp\cmds
> >
> > You need to edit:
> > z_maint.cmd
> > z_auto.cmd
> >
> > With the following extra lines:
> > newid="0x10ec 0x8136,r8169" acpi=off modprobe fan modprobe thermal
> > This goes straight after the existing line/s of text, no carraige
> > return.
> >
> > If you need any more info, for example a boot CD settings please let
> > me
> > know.
> >
> > My e-mail at work is:
> > [email protected]
> >
> >
> > --
> > anthonywhill
> >
> ------------------------------------------------------------------------
> > anthonywhill's Profile: 'NOVELL FORUMS - View Profile: anthonywhill'
> > ('NOVELL FORUMS - View Profile: anthonywhill'
> (http://forums.novell.com/member.php?userid=23050))
> > View this thread: 'Toshiba NB200 ZENworks 7 Novell Netware - NOVELL
> > FORUMS' ('Toshiba NB200 ZENworks 7 Novell Netware - NOVELL FORUMS'
> (http://forums.novell.com/showthread.php?t=384124))
>
>
> --
> dmundric
> ------------------------------------------------------------------------
> dmundric's Profile: 'NOVELL FORUMS - View Profile: dmundric'
> (http://forums.novell.com/member.php?userid=10991)
> View this thread: 'Toshiba NB200 ZENworks 7 Novell Netware - NOVELL
> FORUMS' (http://forums.novell.com/showthread.php?t=384124)
dmundric
dmundric's Profile: http://forums.novell.com/member.php?userid=10991
View this thread: http://forums.novell.com/showthread.php?t=384124

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

When using a path, jagged lines, not smooth lines, uneven lines

I am using a Mac, photoshop CS5
I created a path with Curves with the pen tool.
filled it in with a color light blue.
than I use the paint bucket to change it to dark blue.
This is when the curved lines become jagged, not smooth, uneven.
also I would like to use this as a mask, but with bg color changing from time to time.
any solutions?
GC

Enable the retain transparency option when applying fills or use alternate colorization methods like using adjustment layers or creating the layer as a shape layer in the first place. Not sure what you mean by your mask thingy. You simply load the selection by Ctrl+clicking on teh layer thumbnail. this works no different than with any other layer.
Mylenium

Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy

Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 or 7.0.4 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy. Very much disappointed that I am not able to use IOS 7 and cant go back to what I need.

Mani Dinesh wrote:
Can somebody help me install IOS 6.1.3 back to my iPhone 4.
Downgrading is not supported by Apple.
Mani Dinesh wrote:
...every app gives a break for 4-5 seconds to open up. ...
See this discussion...
https://discussions.apple.com/message/23731048#23731048

PDF exported from Pages (mountain lion) results in jagged font not smooth

I am using Mac air mid-2012 + Mountain Lion (OS X 10.9.4) + Pages (5.2)
I used Arial - Regular - font 12 pt to write a resume. After I export to PDF the font on pdf looks anti-aliased, jagged not smooth on 100% scale. The font in Pages is ok.
I export the same file to *.doc and opened it with OpenOffice and export to PDF using OpenOffice, the font looks no problem.
I have the option "Use LCD font smoothing when available" option checked in system preferences.
Does anyone have the same issue?

This is a known issue in Pages 5's tables. Pages 5 has been out for 9 months now and there is no sign of Apple fixing the issue.
Use Pages '09 if you have it.
Peter

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

My Macbook Pro's navigation is not smooth and screen shakes after after i open folders

I just bought my macbook pro 15" and i am experiencing some problems
For example,
i put safari or any application to full screen. So whenever i move my curser to the top of the screen to i can activate the bar (File - Edit - View - .. etc) It doesn't show and go down smoothly
Whenever I navigate to the right and left with my three fingers, its never smooth ... It keeps breaking and become slow
When I scroll to open my notification center its not smooth
Sometimes the screen shakes when i open an application or do certain things
I guess its a software problem. Please help me find a solution because its getting really frustrating, especially that i just bought it
Thank you a lot

Your warranty includes 90 days of phone support. Call AppleCare.

Adobe Acrobat X Pro writing text not smooth.

I use tablet pc for education in university and I try Adobe Acrobat X Pro writing text it not smooth text can you have add-in pen input support or support pen writing (smooth)for tablet pc?

If you want to annotate the PDF directly on a tablet, use PDF Annotator. The annotation capabilities of Acrobat are poor. You also have to select the erase tool to erase, rather than just turn the pen over. PDF Annotator works the way you would expect annotation to work with a pen. It is also useful if you grade PDFs on the tablet. The only thing I find annoying with Annotator is that the paging is a bit clunky. You should be able to find an educational price for the package, or possibly your school has it under license. There is a 30-day trial if you would like to try it. Most folks here would not dream of annotating with Acrobat for the same reasons you have found.

Toshiba NB200 Touchpad Not Smooth?

Similar Messages

Maybe you are looking for