Toshiba Netbook unable to restore from USB

My Toshiba NetBook NB505-N500 would not boot and recovery failed, so I ordered recovery media on USB. Now I see I do not have option to select USB to boot from. Only HDD/SDD, FDD or LAN. What can I do? If I delete hard drive will that work?
Please help.
Thanks- Lillysnana
Lillysnana
Solved!
Go to Solution.

PXE-E61: Media test failure, check cable
Your BIOS is trying to boot from a network. LAN should be at the bottom of the priority list.
Unless you have messed up the boot priority while fooling around in there, it means access to the hard drive has been lost. And that most often means the hard drive has failed.
Perhaps a failing hard drive was your problem to begin with.
-Jerry

Similar Messages

System Restore from USB - problems

I just switched HDD with another macbook (a 2,1) and it works fine, now my HDD is in the 3,1 body. There was freezing from the off so I decided to restore (from USB - Snow Leopard) the system from time machine to nip any problems early on. The restore finished correctly, i reset, and it hasn't booted since. All I see is the Apple logo and the circular rotating 'busy' icon.
I checked my external HD on a different system to see if it had been corrupted - it hadn't.
SO I don't know what to do now. I think trying to restore again would make sense, but i'm not sure, and I cannot find how to access the restore USB either.
Any advice or suggestions?

mjf123098 wrote:
I restored from a liveUSB which I made,
How did you make it?
thinking that it would have the same functionality as my original DVD however I don't know how to boot direct from USB so thats a problem.
See [Startup Manager: How to select a startup volume|http://support.apple.com/kb/HT1310].
When I restored I did did a full system restore from my last time machine backup - however I realised yesterday that this final backup was made on the system after I switched the HDDs so would just have compounded any errors already there. I should have restored from the last fully working backup, which was the one before that.
However this was onto a new machine, so you could be onto something there. I would like to re-format the HDD and then try to install from the last working backup however as the macbook does not now boot, and I have no CD to hand (waiting for that to get sent over here) looks like I am stuck for the time being.
Is this a fair assessment?
Maybe.
Both macbooks were running 10.6.6 the only differnce between being one is a 2,1 and the other a 3,1 version.
If they were both on 10.6.6, unless one was brand new (and might have been on a different build of 10.6.6), the problem isn't the wrong version of OSX.
It may be that a different Mac's backups were restored, but that usually doesn't cause such severe problems, especially on similar Macs. See [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac|http://support.apple.com/kb/TS3243]. As noted there, the fix is to simply reinstall OSX from the correct disc, but you can't do that yet, either.

Iphone io6 update, unable to restore from back-up

Help!
Updated my iphone tot he new operating system but unable to restore from latest back-up. Lost all my contacts - arghhh!
Any suggestions??

iOS- If you can't back up or restore from a backup in iTunes
Resolve iOS update and restore errors in iTunes
iOS- Unable to update or restore

HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...

Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Help Upgrade to Maverick fails - now unable to restore from time machine as well

Hello,
I have an iMac (2008) which was running snow leopard. The App store reminders to upgrade for free to Mavericks got me today and I decided to go with the upgrade. After the down load of the s/w and while rebooting, it prompts for user id and password.
My iMac has always had an user id and a password. But strangely it would not accept the valid password for the user id. I have retried it several times and it will not accept the password. Not knowing how to proceed, I wanted to revert back.
So I pop in the Snow Leopard bootup DVD and when it starts, I connect to my wifi and choose utilities to perform a time machine restore. The backup was done just prior to my upgrade to mavericks. I am able to mount my external network storage and locate the time machine backup and choose the disk to restore to and the process starts and after a few minutes it aborts.
There is a log file that is shown - but the contents are not easily understood.
Now I have and iMac that is not functional. I am looking for some help.
I would be open to installing Mavericks from scratch - but I do not have the bootable USB. I would like to use my network drive and use that to start my computer with Mavericks and then possibly extract the data from my time machine backup. I am hoping that the restore of my data files / pictures / documents etc can be restored from time machine.
Any ideas how I can proceed from here? Thanks in advance.
ifmx4ever

MichelPM,
Have been offline all along. I resorted to your advice and went with installing Snow Leopard on the external hard drive booting the system on that.
I first tried recovering my Time machine backup - but did not work. So I ended up installing Mavericks on the internal hard drive on my iMac first. Then I was able to connect to my Time machine backup and restored all my data and documents. I chose not to recover the applications. The only useful app that I used was office for mac 2011. I went to microsoft's website to do a fresh install of office for mac 2011 and I am back in business.
Overall a painful way to get an upgrade done. On to my next task - preparing a bootable drive with Mavericks and to back up on Time machine.
Thank you for your suggestions.
ifmx4ever

Q : How to restore from USB if restore partition is removed?

Hi, have made a backup of my Windows 7 cumputer envy 14 spectre to a usb drive with hp recovery manager. After i deleted the restore partition on the drive, and installed Windows 8. Now having sleep/power issues on Windows 8, have to go back to Windoes 7 to test before sending it in for repairs.
Bus even though i have made a USB backup, I cannot boot from the USB drive, and the ect/f11 option on boot, does nothing, windows still just boots.
Now how can i restore from a USB without having access to the F11 restore option on the drive, how to install the System Recovery again?
This question was solved.
View Solution.

Hi,
A backup is not a clone. You would need to have cloned the partition to a bootable USB for it to work.
The HP Backup & Recovery Manager does not copy the recovery partition even if you back up the entire hard drive.
Here is a user reference manual for the HP recovery manager.
Unless you made recovery media in DVD or USB form the only source for it that is available for you is to purchase a set of recovery disks.
I wish I had better news to give you on this.
Best regards.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Bootcamp woes, unable to boot from USB and DVD drive reads all DVDs blank

My partner and I are completely unable to install Windows using Bootcamp. We have tried dozens of solutions on the internet.
2011 iMac (purchased in by me and my partner 2012) reads all DVDs as blank. We have (hilariously) another Mac, an MBP, that has the same exact problem. You'd almost think "Superdrives" eventually just stop working or something. So obviously we can't install Bootcamp on the iMac using a DVD.
But what about a USB stick? Well after modifying the plist file and writing a bootable Windows USB and trying to boot from that, we were greeted with the mysterious and apparently yet-unsolved "no bootable device" error.
So our iMac can't boot from USB drives or read DVDs. We've only owned it for two years. And this is the second Mac we've owned where the Superdrive has died. And we don't even use DVDs more than like once a year.
But anyway, can someone tell me what we're supposed to do if we want to install Windows aside from throwing money away to buy another Superdrive that is probably going to die again in a year? Maybe a way to make our mac boot from our USB stick? Something?
Thanks.

Should you have another drive with a MBR, use it to rule that issue out. Alternatively create a GPT on the flash drive and try to boot from it.
What options are there for the usb controller/boot priorities/order/options? Does the laptop recognize the usb flash when already in bios setup? Should there be any form of choosing the device to boot, use that with the flash drive in the socket, then switch it with the external drive.

Unable to restore from backup

Hello everyone,
I have a small problem that I can't seem to find a solution to. I have 3gs that I sync with my Dell laptop running Win7 and I'm using ITunes 9. When I go to sync, everything syncs fine, backups are creating and it seems that there are no problems. No errors are given once the sync/backup are complete. The other day, I needed to restore from backup. Here's where the problem comes in. After a minute or so of ITunes telling me it's restoring, I get a window that pops up saying something along the lines of "unable to complete restore because the backup session failed." I had about 6 backups available and they all came back with the same error trying to restore. After reading about this problem here in the forums, some have suggested turning off anti-virus software, making sure certain programs have been given access in a firewall. I've tried to sync with AV turned off, Firewall correctly set and even turned off and then continue with restoring, but i continue to receive the same error trying to restore. Any ideas on what might be happening?? I've saved my directories with backups and reisntalled ITunes, still no progress.. Thanks in advance for any ideas..
Bryan

ninerays wrote:
> Hi,
>
> can anyone point us in the right direction to resolve this issue as we
> are unable to restore files to a particular server from backup? We are
> able to restore the same file(s) to another server though.
>
> The error we are getting is as follows:-
>
> 3/06/2009 11:23:38 AM - requesting resource Fibre Transport
> 3/06/2009 11:23:44 AM - Error bpbrm(pid=1744) Couldn't open
> /usr/openv/netbackup/.rename.1744 on client <servername>, status: 1
>
> 3/06/2009 11:23:44 AM - Error bpbrm(pid=1744) cannot put rename file on
> <servername>
>
> We are running Netware 6.5 SP8 & the backup software is Symantec
> AntiVirus 10.1.7.7000.
>
> Thanks
>
>
"the backup software is Symantec AntiVirus 10.1.7.7000"
Are you sure about that?

Help, please. Unable to restore from time machine.

My mid 2011 imac had been working fine. I needed to restore to an early version. I have attempted to do so using the comman + R function during boot up. I followed the directions provided. However, after a while this shows up:
panic(cpu 0 caller 0xffffff800d8c0ac1): "Unable to find driver for this platform: \"ACPI\".\n:@/SourceCache/xnu/xnu-2422.90.20/iokit/Kernel/IOPlatformExpert.cpp: 1541
Debugger called: <panic>
Bactrace (CPU )), Frame : Return Address
0xffffff8085fabdc0 : 0xffff800d422fa9
0xffffff8085fabe40 : 0xffff800d8c0ac1
0xffffff8085fabe50 : 0xffff800d892f1f
0xffffff8085fabea0 : 0xffff800d892adf
0xffffff8085fabf30 : 0xffff800d88e6b9
0xffffff8085fabf70 : 0xffff800d893633
0xffffff8085fabeb0 : 0xffff800d4d6ff7
can't perform kext scan: no kext summary
BSD process name corresponding to current thread: Unknown
Mas OS version:
Not yet seen
Kernal version:
Darwin Kernel Version 31.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x000000d200000
Kernal text base: 0xfffff800d40000
Please help. I need to get my imace working again asap with all my information.

First, to the why. Shear silliness. It's a long story, but I needed to access a website that was cached to view its source code (long story) but only the version in the cache. Unfortunately, I opened that website after the important code had been removed thus removing the old cache version (it's one of those sites that saves only your most recent visit). In an effort to retrieve this information I had the not so brilliant idea to restore my computer. I didn't realize at the time that I propably could solely restore just the cache and not the entire machine. However, in my mind it should have made no difference. Just simply restoring from a backup. Afterall, thats why we backup.
Second, how early? To a version 12 hours younger. So, everything should have been up to date.
Here's some even newer information:
Last night, before your reply, I was able use the command + R function on boot up again. This time I reinstalled the operating system using wifi. The computer is now working, but did not restore. During the installation I was given the option using migration assistant to use my most recent backup. I did this, following the directions given (it's pretty simple--just click when it tells you to). Despite it saying that the migration worked my computer doesn't have any of my old stuff.
I really need to get my info back. I had thought this is why we use time machine and allow it to backup my system a billion times. Its very frustrating that this is not working.

Macbook Pro Won't Do Lion Restore From USB

Hi Users,
I am exhausted. Graduate school is starting again. I have been to way too many forums and I am about to throw this piece of junk called a MacBook Pro in the trash and call it a lost. I will tell you why I am so frustrated:
1. Wanted to reload Mac OSX + bootcamp to install W7. Did a bunch of things on another forum that just made things worse.
2. Now my mac is so jacked up I am trying to do a OSX restore on my USB.
Problem Description:
My macbook lion will not restore from the app store. I put the USB in the computer. I get to the restore Lion window and then it tells me that it will take 99
hours to reload. I do not believe it is even contacting the store. I don't want a bunch of nonsense about how my wifi isn't working or something like that.
I would like to know how to get into the terminal and just freaking reset everything so that even the lion restore on my USB would freaking work.
I am going to take this piece of crap into the store tomorrow, but I have to say, as a computer science major. This is a piece of ####. I can't believe I even
used to be a mac fan boy. This diskless stuff was a great idea, but makes doing major restores a pain. Also, I tried doing a disk DVD restore and even that is jacked up. Sigh...
Frustrated Geek. Thanks for your patience all. I am frustrated at the machine, but not you all.

Can you give some specifics about your situation.
Which MacBook Pro do you have? Did it ship with Lion or is it a pre-Lion model? Do you have the Lion installer on a USB key? Do you have a backup of your MacBook Pro data in case you need to reformat your drive? Do you have a fast internet connection?
What have you attempted so far to restore your OSX Lion partition?
Have you started up from the Recovery Partition? If so, did you have any success downloading Lion from the App store?
Users here are generally helpful if you can provide a little more information.

Unable to restore from my icloud backup

I backed up my 3gs via iCloud and purchased a new 4s. I was expecting to be able to restore from my iCloud backup, but when i tried, it said there was no backup information. I did reset the 3gs before attempting to get the restore started on the 4s. Could that have deleted my backup? I don't think it should have, but I'm not sure why else my iCloud backup is gone. It's screwed me pretty bad. I lost a lot of information!
Help!

I had the same problem, too (but when switching from 4 to 4S).
Reason: The iPhone 4S had firmware 5.0.1, whereas the older iPhone 4 was updated to 5.1 already. The backups are incompatible and hence not shown!!
Solution: First update the 4S to the same (or newer) software version, then restore from the backup.
The update is possible without using iTunes, just update "OTA" ("over the air") from within the iPhone (General -> Settings -> Software update)

Unable to restore from Time Machine Backup

Hello,
My system recently crashed after removing the Boot Camp partition for Windows!
But No problem because I have everything backed up on my Time Capsule!
But actually there is a problem... I inserted my Mac OS X 10.5 Installation disk and tried to restore from a backup done on Mac OS X 10.6.1...
After 3 hours it told me that the restore was sucessful but when I restarted, a grey screen appeared and told me to restart again... And I keep getting that screen each time I try to boot.
I tried to repair the disk using disk utility but still getting the problem!
Can it be caused because the backup was made on Mac OS X Snow Leopard (10.6.1) and I am trying to restore using a Leopard disk (10.5)?
Thanks in advance.
Mathieu
Message was edited by: matappassamy

Tobstar007 wrote:
I had the exact same issue, and thought I was safe with my computer backed up. After failed attempts to restore with the 10.5 disk I got my 10.6 Snow Leopard disk back off my friend. I erased the hard drive and reinstalled Snow Leopard, thinking I could use the migration assistant. Not so, since I had renamed my hard drive from Macintosh HD to a different name, there was but one backup I could choose from which was 10.5.6 or something like that and that was right when I first got my computer. So now I thought: oh now I have Snow Leopard installed on here and I have the Snow Leopard disk, restoring should work. Six hours later it was at 71% telling me it could not restore files. THIS IS INCREDIBLY FRUSTRATING. So right now my computer is yet again going through the unneccessarily arduous journey of erasing it's hard drive and restoring from a backup of 10.6, not 10.6.1 which was made in September. Any help with this failure of Time Capsule and Time Machine would be appreciated. I had to type this on my iPhone since I don't have any computer at the moment. :'(
Try doing a full system restore from your TM backups. See the instructions in item #14 of the Frequently Asked Questions *User Tip* at the top of this forum.

Unable to restore from Time Machine

Hi
I'm having some problem restoring from Time Machine. Here are the steps i've taken to do that but it won't boot after restoration.
Macbook Pro, 2011 Model with 10.7.3.
1. My Mac have 3 partitions (MacHD, Drive A, Drive B) - MacHD has Lion and all other apps, A & B are for my stuff like music, movies etc...
2. I backed it up using Time Machine but in the option I only back up MacHD (A & B) are not backed up.
3. Restarted and Command-R into Disk Utility
4. Erase MacHD using DU. Note: I enabled FileVault so once that's done, its locked but it can be unlock from Disk Utility
5. Restore from TimeMachine, now here's the problem
Once time machine is finished, it reboots my Macbook but keeps going back to the set up screen.
I tried to change the start up disk but this is the error i have is this “you can’t change the startup disk to the selected disk. Building boot caches on boot helper partition failed”
Now i've tried these steps
6. Tried to use http://d43.me/blog/126/building-boot-caches-error-when-changing-startup-disk/ --> by going into Terminal but still doesn't work
the command in that help doesn't work, sudo nano /Library/Preferences/SystemConfiguration/com.apple.Boot.plist
7. Tried Reinstall Mac OS X but the screen come up and said 103days 40hrs to dl the god darn Lion (note I have Lion installESD.dmg stored on Drive B, is it possible to access that and install from drive B?)
8. Can't seem to find the Lion Recovery partition, how can i boot into that? When hold Command-R, it boots into Internet Recovery for 15 misn then go back to the choose languague and the 4 options (restore from TM, Reinstall OSX, Disk Util and somethign else I can't remember)
Basically I want to either restore from my TM back up to current state or re-install new OS X to the MacHD without wiping out the whole drive.
Thanks for your help.

Yes, but you would need to erase/reformat the hard drive to re-install Snow Leopard.
Star with Section E in the first linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

W520: Unable to boot from USB - device does not show up in boot menu

I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
Thanks,
CS

Hello Neil
Thanks for getting back to me
The issue was that the usb drives were disabled in the bios from the Startup menu.
To enable
1. Enter bios
2. Select boot
3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
4. Select the device you require (in my case USB HDD)
5. Save and exit.
You can now boot from a usb stick and install the Linux distro of your choice :-)
Cheers

Forgotten password and unable to restore from ITunes as it is saying i need to disable 'find my phone'

Hi
I would be really grateful if someone could help me. I have forgotten my password as i reset it last night when i was half asleep. I have tried restoring from back up but it will not let me as it is saying I need to disable find my phone. I can't do this as i can't access it on my phone and i cannot see where to do it on ICloud. Any information and help would be apprciated.
Many thanks

http://support.apple.com/kb/HT5661

Toshiba Netbook unable to restore from USB

Similar Messages

Maybe you are looking for