Toshiba Not Prepared for Win 10

I am disappointed that Toshiba did not prepare for Win 10 in the manner they did for Win 8.1. - For Win 8.1 there was advance notification of driver updates and as I recall they were released on or about the same time as the Win 8.1 release. - I have a L855S that is 2 years old (bought new Apr '13) that will not be supported. Many others have laptops that will not be supported. - I do not know how Toshiba compares with HP, Lenovo, and others. But with the number of test previews of Win 10, it seems like there could be better support in a timely manner.

How the HELL do I remove all the background updates Win 10 has been doing for months. My laptop Satellite P875-S7310 hasnt been the same for months. Now it's practically been taken over by MS. Should I just refresh back to Win 8 and upgrade to 8.1 again??? This is ridiculous! Grrrrr.... This laptop is only 2 years old and I can't update to Win 10??

Similar Messages

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

BDT-DC is not prepared for this application object

Hi,
I am getting this the error message:
BDT-DC is not prepared for this application object
when I try to create an extension.
I cam across the following thread:
EEWB
In this thread it is given:
Hi,
The xdcflag in the table TBZ1 needs to be set.
Please follow the steps mentioned below.
1. Start the transaction SM30.
2. Enter the name of the Table/View as V_TBZ1_DC.
3. Press the 'Maintain' button.
4. Double click on the Application Object you are trying to extend(for
e.g., BUPA)
5. Mark the checkbox 'Active in DC' under the section 'BDT DC Settings'.
6. Save the data.
You can refer to note 955236.
When i follow the above steps it says that:
Do not make any changes (SAP entry).
Please Guide.
Regards
Shilpi

Hi Smita,
I am unable to start the wizard.When i choose Start Wizard I get this error message and the wizard is not started.
Regards
Shilpi

The selected log is not prepared for viewing error

Hello,
this is literally my first day using signal express and up to now everything went fine recording voltage from accelerometer and an impact hammer. Without me changing any parameters as far as I remember I now get the errror 'the selected log is not prepared for viewing. Once recording has completed you must right-click on the log and select Make log viewable before viewing it'
Apart from the fact that there is no such option on the log (only the option of Show Value by right clicking)
I went to Tools--> Options--->Logging and made sure that the prepare log data for viewing is on the 'during logging' option.
I then changed that to 'after logging complete' to see if the error stops but nothing yet.
Any help would be appreciated

Hi,
turns out the problem was linked with not having enough space on the server were I saved the logs...when I deleted some previous work to make up space everything worked just fine. Problem solved, thank you for your interest.

Satellite A350 - Toshiba service station for Win 7 is not working

I am using a Toshiba A 350 and downloaded Toshiba Servc\ice Station utility for win 7.
It fails to open (even if admin rights).
The TsmachInfo service is started in srvices.
Any workarounds or do i have to install somthing more to this working?

Hi
As far as I know you have to unzip this firstly and then you have to execute the exe file
Check this
Otherwise its a OS issue because the exe file should run properly and you should be able to install this tool.
Greets

The Veriton X275 not eligible for Win. 10 upgrade! Why?

I have noticed that the Veriton X275 is not listed among the computers eligible for an upgrade to Windows 10. http://us.acer.com/ac/en/US/content/windows10-eligible-models Microsoft has indicated that this computer qualifies to upgrade and the Windows 10 app is stating that Microsoft is working with the Manufacter. My other computer a Toshiba which was registered to upgrade to Win 10 some time afterward has already completed the process, so it is not regionally based. Others in my country have received Win 10 also.

that list states the models that will have drivers support, nothing related to eligilibty to windows 10 update. you can update it but you will need to search new drivers or let windows 10 install new drivers automatically.

Qosmio F50-126 not supprted for Win 7 upgrade?

I am really getting angry about Toshiba and Windows 7 upgrading option.
I am really excited about upgrading my Qosmio F50 -126 to Windows 7 from Vista Home Premium.
But after doing a bit research on the issues involved in upgrading, I burst into anger.
I went to this link [http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm] to check whether my notebook is supported but because i paid good money for it i it SHOULD be supported.
But guess what.. IT ISN'T!!!
On top of that.. it says on the website that the notbook not mentioned will get 'limited support'!!!!
WHAT?? my 1999 dollar MACHINE WILL GET LIMITED SUPPORTED FOR WINDOWS SEVEN!.
What am i suppose to do.. buy another Toshiba or sue them to get the money and buy a new one???
Does this mean I CAN'T run windows seven will all the drivers runnin??? WHAT SHOULD I DARN DOOO??

hi abdusamed,
calm down - it takes some time to get all win7 drivers running, i am sure they will provide drivers for your cam etc...
but i think they are not tested yet.. and you wont get a driver that's improperly working, dont you?
and dont stress yourself with that "limited support"-thing...
this only means if a machine is deliverd with eg. vista there is support for vista only.
if you install antother os eg. win7 or linux they will give you "limited support" means if available they provide drivers and help.
just like running this forum (which is realy helpful to me and some others)
so just wait a little i am sure there will be a solution!
btw: you can investigate your hardware and get some reference drivers of the manufacturers..
but this will take a bit (lots) of time and some testing...
and i am not sure if there isnt any special hardware in it that causes the reference driver to work bad/not.
i wont do that ... but if you like....
btw: is there an official release date for win7-machines from toshiba?

Satellite Pro A120: Need all drivers and easyguard for Win 7

Hi!
I have a Toshiba Satellite Pro A120, which I purchased back in 2007 and I am very satisfied with it.
It had Windows Vista Business, but recently I installed Windows 7 and this is where my dilemmas began.
My touch pad doesn't work correctly, its scroll feature doesn't work anymore, to be precised. I installed the latest ALPS touch pad driver, but the problem remains.
Then, when I checked the system, I noticed two devices that are listed and it said that there are no drivers installed for them. I cannot find out which devices are those and where to find the drivers.
Here are they:
1st: ACPI\TOS6208\2&DABA3FF&1 Driver not installed!
2nd: ACPI\TOS620A\2&DABA3FF&1 Driver not installed!
And my third problem is regarding Toshiba's sets of programs and utilities.
My laptop came with Toshiba Easyguard, with theft protection and other Toshiba programs, and now I lost them all. Is there any way I can get them?
I have to say that I have no intention of going back to Windows Vista, so any help would be appreciated.
Thank you all for your answers and help!

Hi
In my in my humble opinion the additional touchpad features and other devices dont work correctly because the installed drivers are not designed for Win 7 and possibly are not fully compatible with Win 7.
Who knows if the Win 7 drivers would be released for Sat A120 series we will see
At this time I didnt find special Win 7 drivers for A120.
But if found some Win 7 beta drivers on US page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
Maybe you are lucky man and some drivers would run on your A120.

Can I use WIN 8.1 drivers for WIN 7 ?

I have HP Pavilion Notebook - 15-p147ne
it is coming with windows 8.1
I've installed widows 7 on it, coppied the drivers from win 8.1
now when I installed the drivers on win 7 , it keeps telling me that these drivers may crash the system
I continued the process >> updated the drivers after installation
windows is now working
The question is
Are these drivers (which are extracted from windows 8.1) will affect the hardwares of the PC ??? even if they are not designed for win 7 ?
will there be any problem in the performence ?

Hi:
If the drivers are working, then you can reasonably expect them to continue working.
If you ever have a problem with the performance or drivers, etc., you can use all of the W7 x64 drivers and software from this model on yours except the BIOS and firmware files).
http://support.hp.com/us-en/product/HP-Pavilion-15-p000-Notebook-PC-series/6936226/model/7174371/dri...

Acrobat 8 Pro not compatible with Win 7 Pro 64

When I changed from Win XP Pro to Win 7 Pro I could not transfer Acrobat 8 Pro. Adobe Support just informed me that Acrobat 8 Pro was not designed for Win 7 and that's it. This was pretty frustrating and gave me the opportunity to search the market. I am going to switch to PDF Suite that is coequal to Acrobat but hundreds of times favorable in price!

Support gave you the correct answer. The new underpinnings of Windows 7 makes it impossible for Acrobat 8 to function properly. It should not surprise you that new OSs require new software. Acrobat 9 is very nice software, you can get an special upgrade price from 8 to 9. Acrobat 10 is likely to be available real soon now. There are many programs available to create pdfs. Office can do so natively. If that is all you need then Acrobat may not be for you. However, for some there is nothing quite like Acrobat.

Time Capsule "preparing" for over 7 hours with no progress? anyone help?

I can see it and access it, yet it just keeps preparing! tried everything, ethernet, wireless, resetting. Had enough of this useless piece of junk, just problem after problem, shame on you Apple.

The Time Capsule does not prepare for anything.. it has nought to do with ethernet or wireless.
It is Time Machine that is preparing.. ie software on your computer.
But the TC and Lion do have marriage issues.. they need the occasional reboot to get back together.
Read Pondini troubleshooting to find the actual cause of the problem.
http://pondini.org/TM/Troubleshooting.html
Install the widget so you know what is going on..
And run verify on the disk..
See A1 and A5.
It is important you follow it as the means used to backup is rather complex.

Accounting document not prepared while doing issue/pgi

1.when PGI is done accouting document is not prepared for some of the material, but materail is reduced from the Stock, kindly guide me where can i search the accounting key.
2. how to put the value or and other method of alternation.
3.how shall i book the value for the same material showing zero value.
This query is very urgent kindly help me.
My financial work is going on.
Sanjay

Hi
First check if this material is Valuated or not.
check the price control & the related price is maintained or not in the material master.
Thanks & Regards
Kishore

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

The project could not be prepared for publishing because an error occurred.

I have just loaded iLife 09 on my MAC. I've edited a movie and now want to export it, put it in iTunes, whatever I can do to move it beyond my laptop. No matter what option I choose under Share I get the same error message, "The project could not be prepared for publishing because an error occurred. (-2009)". I can find the error message online, but not the (-2009) error code. I'm also a longtime PC person who has just switched to a MAC. Can anyone help?

I also am having the exact same problem. iMovie '09. I have tried changing permissions on all sharing folders, exporting to desktop, sharing to iTunes in all size files - and yet still get "Unable to prepare project for publishing. error (-2009).
Mac OSX version 10.6.2 Snow Leopard

Error of "Not a Valid Win 32 application " installing 7.0 for iPod Shuffle

I have downloaded the apple Itunes 7 software and I get an error of : Not a Valid Win 32 application I have windows xp I have been trying to figure this out for a couple of hours.
All I can figure out is that it is because I have dial up and not a broadband connection (which is one of the requirements for 7.0). If this is the problem, what do I do to get around the not having broadband?
Any help would be greatly appreciated!!!! I would love my new present to work! PS. a family member already has an Ipod Nano installed, can we use the same iTunes?

I have downloaded the apple Itunes 7 software and I
get an error of : Not a Valid Win 32 application I
have windows xp I have been trying to figure this out
for a couple of hours.
All I can figure out is that it is because I have
dial up and not a broadband connection (which is one
of the requirements for 7.0). If this is the
problem, what do I do to get around the not having
broadband?
Any help would be greatly appreciated!!!! I would
love my new present to work! PS. a family member
already has an Ipod Nano installed, can we use the
same iTunes?
I found that I had a bad (not complete) download. After redownloading 7.0 and installing it, it worked great. Hope this helps other with my same problem.

Toshiba Not Prepared for Win 10

Similar Messages

Maybe you are looking for