Toshiba P875 S7102 How To Enter The Bios Setup

I have been tring everything to get to the bios screen of the computer. I have tried holding Esc, F1, F2, F10, F12, Delete, but that has not worked. I have found a toshiba manual that said to hold F2 until you see the toshiba logo then release it. Nothing has worked, it just continues to boot to windows 8.
I have searched and searched, this forum and the web, but I have not found anything that has worked to get into the BIOS setup screen.
What is the proper key stroke to get into the bios screen for P875 S7102 laptop?
Thanks.

The "secret" is what you do when shutting down before attempting to access the BIOS. Press the shift key as you click Shutdown. Then on startup, tap F2 to take you to the BIOS screen.
This applies to Toshiba laptops that came PRE-INSTALLED with Windows 8. It does NOT apply to Windows 7 machines or those that were UPGRADED from Windows 7 to Windows 8.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

Tecra 8000 doesn't boot from CD - how to enter the BIOS?

Hello,
i have a 2nd hand tecra 8000.
Now it dont boot from CD? i dont know why... but he question is how to enter on BIOS setup, because is not possible with F2 key.
How to enter on BIOS?
Thanks too much
Francisco
([email protected])

Hi
Please check this Toshiba FAQ document:
How to access to the BIOS Setup - instructions for most models
http://support.toshiba-tro.de/kb0/FAQ6401G1000DR01.htm

How to enter the BIOS settings on my Satellite L50-A-k4W?

Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

At first you have to perform an complete shutdown.
Here an HowTo:
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

Z87-G43, can't enter the BIOS Setup, system is not running

Hi everyone,
I was working with my pc for about 2 months. Since the very first day i had few problems with mobo but now i can't even run the system and enter the bios. First of all, i had problem with running the system after disabled the MSI logo. I had to enebled it again, because it was the only way to turn on PC (bios stopped at the screen with black screen and a2 code) but it was about 1 month ago. I also remember that from the very beginning option "Hardware Monitor" wasn't working, i mean bios was freezing too and i had to restart PC. Furthermore i have noticed that after choosing language to Polish, few more options in "Settings" appeared, but after switching language back to english they were gone. Unfortunately i can't say now, which one it was because now i got the biggest problem...
BIOS is not running at all. I mean, it all stops with A2 code in right bottom corner of the screen. I can't even enter the bios setup. It shows "Setup is preparing to start" or something like that, but it doesn't run... Can't do nothing atm. BIOS version was the latest - 1.6 . It all started to happening when i had entered to option in bios with disabling or enabling MSI logo, i didn't choose nothing, it freezed, i have resterted PC, and now i nothing is running... Btw sometimes, i coudn't run the system and bios was freezeing also, if my TL-WN722N wasn't connected to USB port in front case's panel. But now, whenever Tp-LINK is connected or not, it's not running...
CPU: i5 4440
GPU: R9 270x
SSD: Plextor 2,5' 128GB, SATA III ( 520/200MB/s ), 9,5mm (PX-128M5S)
Power Supply: XFX Pro Series 550W PSU 120mm 80+ (P1-550S-XXB9)
RAM: Kingston HyperX 2x4GB 1600MHz DDR3 Non-ECC CL9 Intel XMP X2 Grey Series (KHX1600C9D3X2K2/8GX)

Quote from: badboy2k on 04-January-14, 18:37:20
A2 is IDE detect <--- that is a HDD/SSD problem or its cable (try a different one)
if the above doesn't work try to foll0w >>Clear CMOS Guide<< do that to reset the BIOS to defaults with power cord removed from your PSU!
after performing the above steps make sure you enter BIOS and reset the SATA mode (AHCI/IDE/RAID to what you installed your os at) and boot order to your SSD first!
Ye that's the reason, I have a new brand 1tb sata 3 where I installed the windows, but the old 320gb sata 2 is causing the same error, so I have to remove the cables from the sata 2 hdd, than the pc boots ok. I shutdown & reatach the old drive & evrething works untill the PC enters stand by again.

Dynabook: How to enter the BIOS settings?

I have a Dynabook V2/470 CRC. How can I enter the BIOS
settings on this laptop?

Hello
This unit is not known to me but I assume that you can enter BIOS setting pressing F2 button or maybe ESC in combination with F1.
Bye

Sat 4070cdt: How to enter the BIOS?

Hi i have a satellite 4070cdt, am I able to enter the bios, if so how please

Hello Steve
As far I know it should be possible to enter the BIOS by pressing the ESC and then F1 button.
Bye

How to enter the BIOS in Satellite C50-A006

Hi!
I wanted to enter BIOS to select boot sequence in Satellite C50-A006 running with Win8, but I was unsuccessful. I tried pressing F2, F8, F12, ESC and DEL but no luck. Also tried googling, also no luck.
Please help.
Thank you!

Hi
At first you must perform complete shutdown. After doing this you can start machine and enter BIOS settings.
How to perform complete shutdown you can read on - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
Try it please.

Sooo... How do I get into the bios setup?

Now before you get out the pitchforks and torches, I know I'm supposed to continually press or hold a certain Function key when I first power on a computer.
My cousin left me his old Pavilion a410e. I figured I'd set it up for when family or friends needed to use a computer. Well... when I got everything together and started it up, I got an error. "CPU Fan Failure". (Now you see why my cousin gave the computer to me.) I popped open the case and saw the fan spin up fine when powering the computer. The fan's power connecter and the heatsink/fan are all properly in place. I tried to google for a solution, and came across suggestions to turn off the fan check through bios. The computer came into my hands with the 3.06 bios, and while in that bios menu, the cpu fan options were greyed out (unchangeable). I thought maybe a bios update would change that, so I went ahead and downloaded/installed the 3.10 bios update from HP. It installed fine (I guess), but now I can't get into the bios menu, no matter which key I press. Windows boots up fine, so long as I bypass the CPU fan failure warning by pressing F2. I'd really like to kill that warning. How do I get into the bios menu now, guys?

ComputerzEast wrote:
You may be able to go back to an older bios revision. . . some computers let you and others do not. I don't have experience with this particular model to know for sure.
I wouldn't mind trying. I'm not sure where I'd find older bios updates, tho. HP doesn't seem to archive their bioses on the site.
20YearsHPUser wrote:
In windows, what bios version does it report? -- you said you were able to boot into windows.
I'm...not sure what you mean, but if you're asking me which bios version I have installed currently, it's: 3.10. For Pavilion a410e.
nazcar4u wrote:
Ihis may sound stuipid but have u tried hitting the ESC key to enter BIOS?
ESC takes me to the "Boot Menu", which works, oddly... The boot screen says to press F1 to get into the bios setup, but it just won't work.

How to access the BIOS setting for H330 to verify VT setting?

How to access the BIOS setting for H330 to verify VT setting?

Hello Rho2019 and welcome to community,
To enter into BIOS, Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to change the bios back to english. I hit a key and it changed it to Japanese

I put a password on my laptop so I have to sign . well I've forgotten the password so I was trying
To see how to reset it or do a system restore.. Well I was checking out the BIOS and hit the wrong button and now its in a different language. So can someone please help me figure out how to change it back to English. And get into my laptop..I still can't remember my password. Thank you!!
Cherry

Cherry, welcome to the forum.
You should go into the BIOS setup by tapping the "esc" key continuously as the computer is booting. This will take you to a Menu. Choose F10 for BIOS setup. Once you are into the BIOS, use the arrow keys to move to the "Exit" Tab. Press the "Enter" key to open this Tab. Move down to the Default settings (may be a bit different wording) option. Press "Enter" again. You want to choose "Save and exit". This should set the computer back to the way it was when you bought it.
Now, for the password. The only choice that you have is do a System Recovery. There is no way to use the computer without the password.
For future reference, when requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to access the BIOS on Satellite A500-1G2

Hi
Could you tell me how do you enter the BIOS. I have A500-1G2 laptop. I've upgraded the Bios and i can't get in. Please help me.
Czarek

Hi
You can access the BIOS pressing F2 button immediately after the notebook has been powered up (after power button has been pressed).
You can press F2 several time to be 100% sure that this worked

How to enter the values in JTable in runtime

how to enter the values in JTable in runtime

Basically you need a vector of vectors or an array of arrays. Example (off the top of my head):
With Arrays
String[] cols = { "colone", "coltwo", "colthree", "colfour", "colfive" };
String[] numbers = { "one", "two", "three", "four", "five" };
String[] letters = { "A", "B", "C", "D", "E" };
String[][] data = { numbers, letters };
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));
With Vectors
Vector cols = new Vector();
cols.addElement("colone");
cols.addElement("coltwo");
cols.addElement("colthree");
cols.addElement("colfour");
cols.addElement("colfive");
Vector numbers = new Vector();
numbers.addElement("one");
numbers.addElement("two");
numbers.addElement("three");
numbers.addElement("four");
numbers.addElement("five");
Vector letters = new Vector();
numbers.addElement("A");
numbers.addElement("B");
numbers.addElement("C");
numbers.addElement("E");
numbers.addElement("F");
Vector data = new Vector();
data.addElement(numbers);
data.addElement(letters);
//make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
JScrollPane scroll = new JScrollPane(new JTable(data, cols));The array or vector can be easily populated at runtime.
Regards
Riz

How to enter the database in oracle 11g!!

Hi all,
I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
Thanks & Regards
keerthi kumar

SET
sqlplus
/ as sysdba
startup
exit
THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\KEERTHI KUMAR>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=KEERTHIKUMAR
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFAULT_CA_NR=CA18
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\KEERTHI KUMAR
LOGONSERVER=\\KEERTHIKUMAR
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
ram Files\Smart Projects\IsoBuster;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=2c02
ProgramFiles=C:\Program Files
PROMPT=$P$G
P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
USERDOMAIN=KEERTHIKUMAR
USERNAME=KEERTHI KUMAR
USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
windir=C:\WINDOWS
C:\Documents and Settings\KEERTHI KUMAR>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name: startup
Enter password:

How to enter the currency value Flex mobile

Hi, friends, I type from Brazil
how to enter the currency value in textinput
format BR ( Brazil )?:
Thank's

Hello Ashok,
Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
Hope it helps.
Thanks,
Sriram S

Nokia 1650 - how to enter the person's 2 [two] con...

i have purchase nokia 1650. I want to know how to enter the phone-numbers or details of person? [like office,home,mobile, email, etc]

goto particuler contact name->Details->Options->Add Number.
You can do this only for the contacts which r saved in phone memory. If you have contacts in SIM, you have to move it to phone memory before doing this.

Toshiba P875 S7102 How To Enter The Bios Setup

Similar Messages

Maybe you are looking for