Toshiba PC Health Monitor Compatibility Issues in Windows 8.1

Hi all,
I have just recently upgrading from Windows 8 to Windows 8.1
I noticed that the Toshiba PC Health Monitor does not work anymore. Are any of you experiencing this issue?

Here an thread about the same theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=73594
Uninstall the previous Health Monitor version and install newest available version from Toshiba driver page

Similar Messages

  • Qosmio F60-00Y- Intel RST, TOSHIBA PC Health Monitor crash

    Hi,
    Just started having problems today with my Qosmio F60-00Y, purchased June 2010. I do have extended warranty but just wanted a quick fix since system is still operational.
    As I have lost my factory settings recovery I can not reset my system.
    It is working fine at the moment as long as I don't open both programs Intel RST, TOSHIBA PC Health Monitor.
    When I open one, system decides to freeze and fan speed accelerates and it shuts the notebook down. I have done system restore several times too and same problem still happens.
    I have reinstalled both programs from:
    http://www.mytoshiba.com.au/support/computers/qosmio/f60/pqf65a-00y002/download
    After re-installing assuming, programs will run fine again. Same thing happens, crashes and shuts down.
    I do regular virus and anti spy-wear check up with trend micro 2012 and still active every 7 days and defragment the system every 7 days.
    No viruses and spy-wear found.
    PLEASE HELP!
    thanks,
    Lem S.

    It is not easy to say how you can fix this.
    Try to remove all problematic applications, clean registry entries and try to install it again.

  • Toshiba pc health monitor

    Hi guys i have a toshiba qosmio x70-a  and i play a lot of game but i want to know if the processor temperature in the toshiba pc health monitor is viable? Because the temperature is in % but is this the same as celsius? Like if that show 70% in the uc temperature its will be 70 degrees celsius i presume? Thanks.
    (Sorry for mistake)

    I ran a comparison between Core Temp and Toshiba Health Monitor.  My readings this morning.......
    **Core Temp shows my 2 cores to be at 37C and 44C with a TjMax of 105C
    **Toshiba Health Monitor shows my processor temp to be at 36%
    So they're not that far apart and I'd consider the Toshiba Health Monitor to be reasonably accurate.  
    I'm not looking for exact; just looking for a snapshot that shows me that temps are in the safe range.  One thing that CORE TEMP has that the Toshiba Health Monitor doesn't have are some settings for "overheat protection".  

  • When will there be an itunes update that resolves the compatibility issues with windows 8

    When will there be an itunes update that resolves the compatibility issues with windows 8

    I hadn't heard there are issues.  Can you tell me what the issues you have run into are?  I just downloaded it yesterday on my new laptop and I am having issues syncing today...

  • Toshiba PC Health Monitor Program

    I have been using my Toshiba DX1215-D2101 for a week.  What I have noticed is that the PC Health Monitor program uses 25% of the processing power.  Is there a way to turn this on and off or is there a newer version that does not use so much processing power?  Is this program necessary?

    Further issues of interest...
    What is my computer doing?  will show no activity in its window even when the hard drive light is steady (I mean like lit...not blinking rapidly.  Lit SOLID).
    Clicking the start menu in windows is ok, but if I click all programs and attempt to open a folder, it loses its mind(little magnifying glass circling and circling and circling)...
    Toshiba PC Health says the hdd health is good.  I'm losing my faith that it is...

  • Satellite P855-108 - PC health Monitor fails to update - Windows 8.1 update

    Hello,
    today updated to win 8.1 from a one year old windows 8, everything went fine
    Then I followed Toshiba recommendations for updating the tools but despite doing exactly as explained the flash cards(and the functions buttons) are not functioning, they worked perfectly in win 8!
    _The only utility that fails to update is PC health monitor,_ the version installed is 1.9.04.6402 and the one from support site for win 8.1 is 1.9.09.6400, when trying to install it fails with error message "not support"
    When trying to open the installed health monitor there is also an error message "can`t get the bios type".
    This is strange and every other utility recognizes the latest bios version 6.70 an the laptop`s details an serial
    I tried all I could think about, installed flash card support tool from win 8, enabling and disabling in the bios, even installed VAP for win 8 but no change
    Any help would be highly appreciated
    Latest system driver and other tools are installed
    Thanks in advance

    Sorry for taking space on the forum,
    _In case anyone is facing the same problem I managed to find a solution by my self,_
    *it was caused by the old version of PC health monitor,*
    uninstalled, updated to latest version
    Now Function key utility and everything works as supposed, _the latest Health monitor also works fine_

  • How do I fix Reader XI compatability issues with Windows 7 Home Premium?

    Compatability issues are keeping me from being able to open pdf files using Acrobat Reader XI.  I have Windows 7 Home Premium and am using Webroot Security.  It is telling me to try unprotected mode, but I would like to be able to use protected mode.  Any way to fix this?

    M Ben wrote:
    all of my option under file and edit are darked out.
    All menu options in Reader DC are very faint compared to earlier Reader versions or other programs.  You should still be able to click Preferences on the Edit menu:

  • Compatability issues with Windows 7

    I have been trying to print out some event tickets from an email attachment and am being told that there is a compatability issues between that latest Adobe acrobat and Windows 7. I have been directed to this website for solutions.

    Hi,
    Are you Adobe Acrobat or Adobe Acrobat Reader to view the tickets?
    Did you try saving the attachments to your desktop and initiating a print?
    Thanks

  • Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

    I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

    I have called HP-Support and the answer was:
    «Thank you for contacting HP Active Chat Support.
    This is in continuation to our response with regards to your chat ID: 63381567
    As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
    Start the computer.
    Press the F10 key to enter the BIOS setup.
    Select Restore Defaults .
    Under Load Defaults , select Yes .
    Choose Save Changes and Exit .
    Under Save Changes and Exit , choose Yes .
    If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
    The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
    Open Control Panel .
    Expand View by: and select Large Icons .
    Click Administrative Tools .
    Double-click Services .
    Double-click Telephony .
    Under the General tab, expand Startup Type , then select Automatic .
    Click Apply , click Start , then click OK .
    Restart the system.
    If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
    The issue was not resolved.
    So I'm waiting for the release of the new driver...

  • Firefox browser won't open after Windows Troubleshooter 'fixed' FrontPage XP compatibility issue with windows 7? HELP!!

    The issue- Firefox browser won't launch.
    The history- Ran Windows troubleshooter to 'fix' compatibility issues running FrontPage (office xp proferssional version) on Windows 7. (Front Page opened then stopped responding partway through launch before 'fix'.)
    Now Front Page works (whoop-whoop!) but no Firefox :o(

    I removed opentext nfs solo v14 (hummingbird) it is just worked.

  • SQL Server 2008 R2 Standard - Compatibility issues with Windows Server 2012 R2

    Hello,
    We used as a test a box on which we installed Windows Server 2012 R2 and SQL Server 2008 R2 Standard Edition. No Service pack was installed. It worked perfect.
    Now we try to do it on another box and all of the sudden there is compatibility issue when we try to instal SQL Server. We can still install SQL Server by clicking "Continue without getting help".
    Where can this come from? If it is hardware related what are the thing I should look at?
    Thanks all

    Hello,
    Adding to Shanky suggestion, you can perform a slipstream installation of SQL Server 2008 R2 + SP3 to make SQL Server
    2008 R2 compatible with the newer operating system, as explained on the following post.
    http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
    https://support.microsoft.com/en-us/kb/955392/
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Compatibility issues with windows 10

    I have a 3 year old S2031 Hp Monitor. I reserved a free upgrade to window 10. I received  the following issue from Microsoft: NVIDIA GeForce 6150Se Nforce 430The display manufacture has not made your display compatible with Windows 10. check with your manufacture for support. Is there a fix?

    The phase indicated in the post "NVIDIA GeForce 6150Se Nforce 430" is from the motherboard built in graphics chipset.  If you have a separate graphics card solution, then it might still be OK.  That chipset is fairly old by computer standards, so it must not be supported in Windows 10.  I would wait for a couple of months, a workaround might show up from a higher demand for that chipset support for Windows 10.

  • SAP GUI Compatibility issue with Windows 2008R2 64 Bit

    Hi Gurus
    Is anyone experienced connectivity issue with SAP GUI (32bit)  on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
    to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
    Your inputs greatly appreciated.
    -giri

    Hi Giri
    Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
    Refer the SAP Note  66971 - Supported SAP GUI platforms
    BR
    SS

  • Compatability issues with Windows 7 and Ipod Classic initially set-up w/ XP

    When I opened my iTunes account for my iPod Classic 2 years ago, I was using Windows XP and could download from iTunes Store or load my own CDs and then sync to my iPod.  Long story short: That computer crashed. I now use Windows 7 on both my new computers but while I can review the contents of my Classic, itTunes won't play any of the tracks when connected to my computer's USB.  Nor can I sync purchases or downloads.  Incidentally, attempts to review my Ipod in "computer" doesn't consistently show my iPod either.  I continually receive the same message telling me that "iTunes.exe has been set to run in compatibility mode for an older version of Windows.  For best results, turn off compatibility mode for iTunes before opening." I right clicked on iTunes, regarding compatibility, but it informs me that there are no previous versions available to do this.  My warranty for technical or phone support has expired, so I am unable to speak to a representative.  It sounds like other people are having similar problems with the newest version 11.1 of iTunes.  Has anyone worked their way around this?

    Hi anne274,
    I'm sorry to hear about your Dad.
    Since the music was originally ripped from CD, you should be able to put the iPod into disk mode http://support.apple.com/kb/HT1363 and transfer the music into your library without loosing anything.

  • Application compatibility issue in windows 8.1 O.S

    We developed metro application in Windows 8 OS. We are planning to move the same application to windows 8.1 OS. We had some issue with flickering .if we try to open any form black screen
    is appearing before loading the form. We don’t have the same kind of problem in windows 8 OS. Please advise.

    Hi,
    Since this issue is related to store app development, to help you better, I suggest you submit a new case on MSDN forum as they will be more professional on your issue:
    This is the MSDN forum link.
    https://social.msdn.microsoft.com/Forums/en-US/home?category=windowsapps
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.  Thank you for your understanding.
    Kate Li
    TechNet Community Support

Maybe you are looking for

  • Product hierarchy  is not being maintained in the sales order material

    Hi, I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In

  • Bind Variables in SPARQL Queries

    Hi, I am interested in bind variables and their use between queries, however while I see the concept behind the example given in the documentation (http://docs.oracle.com/cd/E11882_01/appdev.112/e25609/sem_jena.htm#autoId15) I am not able to grasp ho

  • Rehire contingent worker to employee into a different business group

    How to rehire contingent worker as an employee to a different business group programatically. I used hr_employee_api.hire_into_job to rehire into the same BG. Can any one suggest a solution ? Regards Thomas

  • Undesired Speck on iphone 3G screen

    Can anyone advise me, on the the best course of action I can take regarding a "speck" (fleck, spot etc.) of somekind that some how got on the LCD screen from the inside. It can go un-noticed if your not aware it's there, but I do and have over analyz

  • I NEED A FIRST 5 ROWS DATA

    HI EXPORTS, MY QURY IS SELECT TOT.HTNO, TOT.RESULT_NAME, TOT.TOTALMARKS, TOT.TOTALRANK, TOT.RESEXAMSLNO, TOT.RESACADEMICSLNO, TOT.RESGROUPSLNO, TOT.RESCORPCOLLSLNO, TOT.DISTRICTSLNO FROM RESULT_STUDENTMARKS_TOTALS TOT WHERE TOT.RESEXAMSLNO = 1 AND TO