Toshiba please add a bios patch for qosmio x70 series to fix common issue!

The x70 juding by what most people have said about it, is that it has overheating issues, and mine like most others is no different. Though mine doesn't shut off my gpu runs over 80c which is when it downclocks to avoid overheating, and makes most all of my games unplayable. I have already applied thermal paste and cleaned it out several times as someone who is experienced with computers I can tell it has to do with design.
But there may be another simple fix, I feel like the fan even at full speed still goes too slow. We need a bios patch that makes the fan run extra fast when the nvidia gpu hits 75 degrees, so that everyone can enjoy a nice gaming experience without overheating. Can someone(customer service rep) pass this message along to upper management and see if we can get something done. Me and many other customers would be absolutely delighted if you guys at Toshiba could impiment such a feature.
I would like feedback to this idea, and beg for something like this to implimented, I know Toshiba can do something like this, please help make your customers happy with their gaming laptops.
~~~Thank you.

PM (private message) Peter with this thread link and see what he can find out.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Similar Messages

HT3743 HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

If you don't have a SIM card in the phone, you must put one in. It's required for activation.
If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone.

Please add "push to wake" for smart covers

Please add an option to push the home button to wake an ipad using a smart cover, similar to how I wake my phone. currently everytime i pick up my I pad it wakes up then shuts down as the cover slides around.

this is a user helping user forum apple don't read or write here if you want to request features complain or the likes to apple use the feedback channel
http://www.apple.com/feedback/ipad.html

New BIOS Update for the Z61m Series

Hi,
I have a problem with the downloading of the new BIOS Update for above mentioned notebook. Lenovo provides the version 2.25, but only via BIOS utility (exe-File), although a link to bootable CD exists. Can anyone confirm this or can help me?
Do anyone know a possibilty to contact lenovo/ibm in an easy way (not by contact form)?
Thanks in advance,
AfterBurner

I have the same problem! Will try wit System Update!

Please add indicator LED light for the HDD and sleep back, add some system hotkey

After Lenovo have announced the new T440 T540，we were shocked by the graphic card: GT720m (game card) and no indicator LED for HDD. At last we need a NVS graphic card to do some grophic related work or mobile business.
So we waited for the new w540, after coming to public we were shocked again there is :
- no indicator LED for HDD, sleep, wift and bluetooth,
- no hotkey to disable touchpad
- no hotkey to sleep
- no turn on/off screen hotkey
- no hot plug for cdrom or second HDD
these are miserable and somehow funny, maybe no indicator for apple is ok as most new macbooks are all SSD
rather than mechanical hard disk.
maybe no led for sleep for apple is ok as Mac OS goes to sleep very quick and they use SSD. But for thinkpads we close the lid and wait for the moon LED light to take thinkpad freely, also for the sake of hard disk rotation. Now we need to look at the power button which is impossible when the lid is closed.
no hotkey for sleep ? some friends said " Fn+4 acts as a suspend shortcut (I think it was added in BIOS 2.05)" , we hope it is ok.
no notkey to off display? no hotkey to disable touchpad? It is really unconvenient
So is there update for these minus? Hotkey may update by the BIOS and driver. Will lenovo do so? After testing well, it will be back really easy to use.
And is there any Modle B for w540 to add LED back ? Missing indicator LED for HDD is nightmare for troubleshooting. Miss sleep indicator in front of Thinkpad(A-Side) is miserable for bringing sleeping w540.
Miss wifi and bluetooth is also unconvenient..... And it is not a very hard work.
Also it is said there is no driver update for fingerprinter reader from AuthenTec, because AuthenTec is bought by Apple?
For thoso who do is really smart but also keep the good previous features,
PLEASE
http://www.notebookreview.com/
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W540-Future-Owners-Thread/td-p/1308051/page/6
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Received-my-W540-today-First-impressions/td-p...

Today on shutting down the W540, I get the Windows blue shut down screen with the comment:
"Operations are in progress, pleases wait. The machine will be turned off automatically after the operations are complete."
OK, so I waited 20+ minutes.... Mouse logo spinning, but no idea what i/o's are going on. Fast disk access? Slow disk access, intermittent disk access? Or is it locked? CtrlAltDel has no action. Mouse cursor does move.
So did a cold boot/restart (still not knowing what was happening in the Black Box). Must have locked up restarting, as I waited 10+ minutes with NO IDEA what was going on, a REAL "black box".
Cold booted again, and tried a Safe Mode. Worked!, and did a check disk - said not errors????. All OK now.... but WHERE IS THE HD LIGHT!!!!!!!
Now I just cheked, the Dell, ASUS, TOSHIBA, SONY workstations have them..... We need to review this carefully at the R&D level, AND NOT LISTEN TO MARKETING! T'was, my fault for deciding on the W540, I never checked that specification, and just ASSumed all the indicators lights would be there! Now I'm stuck with a $2,500 toy - never feeling secure in the work being done. I need rwo more workstartion, but it will be a nuissance to be on two types of workstations.
When I run my Stat package, it takes sometime 1+hr of analysis, I have no idea if the program is waiting, paused, or locked.... no HD activity light, no heartbeat no idea if I need to reboot, or wait. Maybe it's an act ot terrorism to waste US worker's time ???? <g>

Please reset my bios password for me on hp mini laptop

someone enter a bios password on my hp mini laptop computer but i have no idea can someone help please error code is 2mc9142yp2
This question was solved.
View Solution.

Hi,
Try entering: 74eo3v7i27
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Please release a bios update for miix 3-1030 to enable "USB BOOTING"

as title says. i've tried; usb hdd's on the two ports on the docktwo different otg cablessecure boot on / offformatted usb stick with rufus with the ufi option but always get this; non of ther suggestions on the forum work re otg cables / hubs etc. please lenovo, make a bios update to enable this basic feature!

You must use UEFI-prepared USB drive and only 32 bit for ex. Windows 8.1 32-bit; debian 32-bit; android-x86 32 EFI

Need traditional BIOS update for Qosmio F30-111

I would like to get the traditional BIOS update like described in BIOS update FAQ. I don't have windows installed for updating it. (and I don't want to install it)
Can someone supply it? 3.90 version.
Thanks

Hello
if you do not want to install windows and you need to run the bios update windows software , then you can try this method
Instructions
1. download the BIOS
2. Unzip to root of USB flash drive (formatted as FAT32) {"P0041v390.exe" is inside "bios-20080505133719.zip" v3.90}
3. Unplug the USB flash drive and power down.
4. Insert the 32 bit Vista DVD and boot from it (you are not actually going to end up installing it or doing anything, this just gets you to the 32 bit WinPE environment)
5. Click through until you get to the screen with the activate online checkbox and uncheck it.
6. Connect the USB flash key to the computer
7. Press Shift-F10 to open a command prompt
8. Change to the correct drive for the USB flash drive
9. type "P0041v390.exe" {or what ever} and press enter
10. after the flash is complete, before letting the machine restart, EJECT the DVD. (remember, nothing was installed and nothing really happened except you had access to a 32 bit WinPE environment which you needed to flash the BIOS).
{color:#ff0000}I did not try this method , try it and tell me
{color}
good luck ;)
Message was edited by: ADMIN

Cannot find Win8.1 drivers for Qosmio X70-A-11L

Hello,
Lately I cannot find anywhere driver support for my model, X70-A-11L, no matter where I search for them. Does anyone know why Toshiba has removed these drivers and what are the alternatives?
Thank you.

Hi
Please visit http://www.toshiba.eu/innovation/generic/windows8_1-message/
There you will find all you need.
Model compatibility check on Toshiba Compatibility Matrix and link for Windows 8.1 Drivers Page.
Your notebook model is listed there.
Good luck

BIOS UPDATE for GE 60 - GE70 0ND (GPU BOOST ISSUE)

I and some of my friends have GPU boost issue with MSI GE60 and GE70 0ND ... (GTX 660M) in TURKEY
We also have a forum for this issue and number of members increases day by day.
We have E16GAIMS.513 BIOS in our notebooks.
One of our friends sent his laptop to technical service and they downloaded newer BIOS 514 (WIN8)and this GPU issue is solved.
However, since there is no update for 514 BIOS in download tab, we cannot update our BIOS and GPU issue continues.
Can you upload this newer 514 BIOS update to download tab as soon as possible.
We are expecting your positive answers.

Quote from: pshywar on 30-March-13, 04:35:40
I think we should wait that this update is uploaded to main website in order to prevent some compatibility or etc issues.
BIOS update is a important issue and it can causes irrecoverable problems. So, we continue to wait
That's a good point; while I got back I was thinking of flashing it but had a re-read of the step-by-step guide before doing so and thought otherwise. Best wait for the official one, that is if they release it.
I'm also going to contact the customer service support to have this included in their download section. I made enough noise for them to update the HD Audio drivers, so here's to this getting the inclusion as well.
Quote from: Prema on 30-March-13, 05:59:24
It was a test, they may never publish it...
But they included the latest BIOS in the Topic Creator's friend's Notebook. Hopefully, if enough noise is made, they will publish it.
Quote from: darkhawk on 30-March-13, 09:47:09
Here's my thoughts. And you probably won't like them.
Try upgrading using that BIOS. What's the worst that could happen? You brick your machine? Make sure everything is backed up, and try it. You want the VBIOS portion fixed so it boosts? Well.....try that BIOS. And if it doesn't work or bricks the machine, you'll need to send it back anyway and they will probably load the BIOS on it then anyway.......
Either way, it's a win (albeit, in 1 situation it might take a few weeks....). You'll get what you want.
I obviously can't try it as I don't have a GE60.....
I think it might be best to just wait for the official one, as the warranty services in Australia are absolutely poops, be it any make or brand - most companies are not obligated to have the customer's best interest at heart, so if they can get away with voiding it, they will - so I'm not too keen to test this unofficial one lest it affects my warranty.
Thanks for your input though, nonetheless, darkhawk.

Is there a voltage Mod (or bios hacked) for the KT4Ultra series?

Thx!

goto this link :
http://www.msi.com.tw/program/service/forum/index.php?threadid=15634&boardid=13&styleid=1

Every time I open Firefox another page of Firefox opens that has adds. What can you do to help me fix this issue?

When I boot up Firefox, my default web browser, Firefox appears and then it loads another page of Firefox that has adds. How can you help me with this issue?

This unwanted page opens as a second tab, or as a second window? The usual cause of this problem is a bad add-on. Here's my suggested procedure for tracking down and removing bad add-ons. I know it seems long, but it's not that bad.
(1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. ''Don't be fooled by seemingly innocent or important names if you do not remember choosing to install them.'' Take out as much trash as possible here.
(2) Open Firefox's '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
* in the Windows "Run" dialog, type or paste <br><code>firefox.exe "about:addons"</code>
In the left column, click '''Plugins'''. Set nonessential and unrecognized plugins to "Never Activate".
In the left column, click '''Extensions'''. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions. (Note: you might not be able to manually Disable extensions in Safe Mode because they are disabled automatically.)
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
(3) You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.
Success?

When trying to access one website, Firefox says " This domain is not configured for this service. Please add it to your account."

I am trying to access a fabric website I have used before and when I try to type in the domain name, a message appears saying "This domain is not configured for this service. Please add it to your account". How do I fix this?

That message sounds like an address might have changed on the server...
Are you trying to access the site directly using a bookmarks, or by typing into the address bar, or by following a link in a search engine? Sometimes links change making bookmarks and search engine entries obsolete, or Firefox's autofill feature suggests an address that no longer works, so if one approach doesn't work, you might try one of the others.

[svn:fx-3.x] 10974: Submitting customer patch for SDK-19188.

Revision: 10974
Author:   [email protected]
Date:     2009-10-12 14:56:48 -0700 (Mon, 12 Oct 2009)
Log Message:
Submitting customer patch for SDK-19188. Correcting XSD scope lookup while decoding wrapped style document literal responses.
QE notes: Please add a regression test for this scenario.
Doc notes: N/A
Bugs: SDK-19188
Reviewer: Pete
Tests run: Checkintests, webtier mxunit, flexunit
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19188
    http://bugs.adobe.com/jira/browse/SDK-19188
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/rpc/soap/SOAPDecoder.as

Patch for dbxml-2.5.16\dbxml\src\perl\build.bat to make it work better!

Hi folks at Oracle,
please consider accepting this patch for the Windows Perl module build script into your distribution of Berkeley DB XML:
--- build.bat.orig      2009-12-22 14:17:00.000000000 +0100
+++ build.bat   2010-03-01 02:38:26.859375000 +0100
@@ -6,46 +6,54 @@
:: "noinstall" installation is not done
-call :TryBat "c:\Program Files\Microsoft Visual Studio .NET 2003\Common7\Tools\vsvars32.bat" && goto BATFOUND1
+:: Avoid hard-coded paths like "C:\Program Files\Microsoft ...".
+:: In another locale, the path is different: "C:\Programme\Microsoft ...".
+:: Use the appropriate environment variables instead.
+:: There is %ProgramFiles% for the program folder.
+:: There are dedicated variables for Visual Studio.
+:: These are by far the best bets here.
-call :TryBat "c:\Program Files\Microsoft Visual Studio .NET\Common7\Tools\vsvars32.bat" && goto BATFOUND2
+call :TryBat "%VS90COMNTOOLS%\vsvars32.bat" && goto VS90
-call :TryBat "c:\Program Files\Microsoft Visual Studio.NET\Common7\Tools\vsvars32.bat" && goto BATFOUND3
+call :TryBat "%VS80COMNTOOLS%\vsvars32.bat" && goto VS80
-call :TryBat "c:\Program Files\Microsoft Visual Studio 8\Common7\Tools\vsvars32.bat" && goto BATFOUND4
+call :TryBat "%VS70COMNTOOLS%\vsvars32.bat" && goto VS70
goto BATNOTFOUND
-:BATFOUND1
-echo Using Visual Studio .NET 2003
+:VS90
+echo Using Visual Studio 2008, VS9
goto BATFOUND
-:BATFOUND2
-echo Using Visual Studio .NET
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
+:VS80
+echo Using Visual Studio 2005, VS8
goto BATFOUND
-:BATFOUND3
-echo Using Visual Studio.NET
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
-goto BATFOUND
-:BATFOUND4
-echo Using Visual Studio 2005
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
+:VS70
+echo Using Visual Studio 2003, VS7
goto BATFOUND
:BATFOUND
+echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
:: Use the correct line, depending on whether you are building
:: release or debug
:: perl Makefile.PL -config config.win32d >> winbld.out
:: perl Makefile.PL prefix=../../../perl -config config.win32 >> winbld.out
-perl Makefile.PL -config config.win32 >> winbld.out
+
+IF EXIST ..\..\..\bin\debug\libdbxml25d.dll (
+    perl Makefile.PL -config config.win32d >> winbld.out
+) ELSE (
+    perl Makefile.PL -config config.win32 >> winbld.out
+)
+
nmake >> winbld.out
nmake ppd >> winbld.out
if /I [%1] NEQ [noinstall] (
+    echo installing modules, info in logfile winbld.out
     nmake install >> winbld.out
+) else (
+    echo not installing modules as requested
goto ENDIt'll make installation success more likely for international users, and also for English users. Also, at the end of the process, the user is informed where he can go looking for what the installation process has been doing. Plus, the script tries to figure out on its own whether to use the debug config or the straight config.
The build has been successful for as much as I can say now:
:: perl -MSleepycat::DbXml -lwe "print $Sleepycat::DbXml::VERSION"
2.0050016
:: perl -MSleepycat::DbXml -lwe "print $Sleepycat::Db::VERSION"
4.008026Michael Ludwig

Hi Michael,
Thanks for the patch! We'll take a look at that and try to improve the Perl installation in the next release.
John

Toshiba please add a bios patch for qosmio x70 series to fix common issue!

Similar Messages

Maybe you are looking for