Toshiba Qosmio X505-Q8102X Restarting
Hello all,
I just bought a Qosmio x505-Q8102x and Im having an issue with it randomly restarting when playing games. The odd thing is that it only seems to happen when I have the power adaptor plugged in.
I also have a side question about how to adjust the contrast of the screen without using the option in the Toshiba program that seems to be set up for the web cam. I tried to use the contrast option in there but it said that it would use high cpu. So I turned it off. I just can't seem to find the same screen controls that you have with all other monitors.
Thanks,
Ah that's c*ap.. but thx for reply mate
Not quite satisfied with support here in Europe/Croatia, can't get any recovery media for my laptop as the recovery partition is damaged.. Fresh copy of windows works like crap with everything installed and updated.. I runned better when it was with factory preinstalled software..
Similar Messages
-
Toshiba Qosmio X505 Q8102X Ivy Bridge support?
Is Qosmio X505 Q8102X Ivy Bridge supported? Wondering because i'd like to upgrade the CPU on my Qosmio.
Thx in advanceAh that's c*ap.. but thx for reply mate
Not quite satisfied with support here in Europe/Croatia, can't get any recovery media for my laptop as the recovery partition is damaged.. Fresh copy of windows works like crap with everything installed and updated.. I runned better when it was with factory preinstalled software.. -
[Solved] Random freezes on a Toshiba Qosmio X505-Q888
Hi guys,
My laptop has been freezing randomly, about once per day, during the last 2 or 3 weeks. The system freezes completely, i.e. the display freezes, I cannot move the mouse, I cannot use the keyboard, the CAPS LOCK light starts blinking, and if there is any music playing, it enters an infinite loop of 2-3 seconds. I cannot use any keyboard combination such as Ctrl+Alt+F1 to switch into a terminal. Then I have no choice but to press and hold the power button.
The freezes seem to happen in a completely random fashion, independently from what programs/applications I am running, for how long the computer has been on, how much memory I am using, CPU temperature, etc. Also, I cannot find any clue in the log files. Everything seems to be OK just before the freeze (except for some random, annoying, but apparently unrelated messages such as "[system] Failed to activate service 'org.freedesktop.Avahi': timed out"). The only clue is that the CAPS LOCK key is blinking during the freeze, which means... kernel panic?
I am running 64-bit Arch Linux on a Toshiba Qosmio X505-Q888. My current kernel is 3.4.2-2, but this has been happening since at least 3.3.7-1. I know another person with exactly the same laptop model as me, who is having the same issues. I am lost here. Any ideas?
Thanks in advance!
lspci output:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GT215 [GeForce GTS 360M] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
07:00.0 FireWire (IEEE 1394): O2 Micro, Inc. 1394 OHCI Compliant Host Controller (rev 01)
07:00.1 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
07:00.2 Mass storage controller: O2 Micro, Inc. Integrated MS/MSPRO/xD Controller (rev 01)
0a:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
0b:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
lsmod output:
Module Size Used by
fuse 68768 2
uvcvideo 69437 0
videobuf2_vmalloc 2468 1 uvcvideo
videobuf2_memops 2246 1 videobuf2_vmalloc
snd_hda_codec_hdmi 23672 4
videobuf2_core 20415 1 uvcvideo
videodev 93086 1 uvcvideo
media 10213 2 uvcvideo,videodev
joydev 9991 0
snd_hda_codec_conexant 46154 1
snd_hda_intel 24053 6
snd_hda_codec 94273 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
arc4 1410 2
snd_hwdep 6300 1 snd_hda_codec
rtl8192se 60798 0
snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
sdhci_pci 10833 0
rtlwifi 61929 1 rtl8192se
nvidia 10832296 52
sdhci 23854 1 sdhci_pci
toshiba_acpi 12820 0
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
sparse_keymap 3056 1 toshiba_acpi
acpi_cpufreq 5933 1
snd_timer 18966 1 snd_pcm
mac80211 395232 2 rtlwifi,rtl8192se
snd 58997 18 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
mmc_core 82070 2 sdhci,sdhci_pci
mperf 1267 1 acpi_cpufreq
serio_raw 4653 0
soundcore 5410 1 snd
i2c_i801 8180 0
wmi 8475 1 toshiba_acpi
psmouse 70792 0
processor 26567 1 acpi_cpufreq
video 11307 0
thermal 7959 0
battery 6517 0
ac 2376 0
pcspkr 1899 0
cfg80211 169978 2 mac80211,rtlwifi
microcode 12185 0
coretemp 5654 0
iTCO_wdt 12813 0
rfkill 15604 3 cfg80211,toshiba_acpi
iTCO_vendor_support 1929 1 iTCO_wdt
i7core_edac 17509 0
edac_core 36656 1 i7core_edac
crc32c_intel 1987 0
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
atl1c 33030 0
crc_itu_t 1363 1 firewire_core
button 4502 0
toshiba_bluetooth 2066 0
i2c_core 20369 3 i2c_i801,nvidia,videodev
evdev 9754 11
vboxdrv 1792262 0
loop 18160 0
ext4 424175 4
crc16 1359 1 ext4
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 6
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85285 1 usbhid
ahci 20549 5
libahci 20023 1 ahci
libata 167515 2 ahci,libahci
ehci_hcd 41154 0
scsi_mod 132942 3 libata,sd_mod,sr_mod
usbcore 147533 5 uvcvideo,rtlwifi,ehci_hcd,usbhid
usb_common 954 1 usbcore
/var/log/dmesg.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.2-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 11 22:27:17 CEST 2012
[ 0.000000] Command line: root=/dev/sda6 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf3ec000 (usable)
[ 0.000000] BIOS-e820: 00000000bf3ec000 - 00000000bf40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf470000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf470000 - 00000000bf4f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf4f1000 - 00000000bf70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf718000 (usable)
[ 0.000000] BIOS-e820: 00000000bf718000 - 00000000bf71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf782000 (usable)
[ 0.000000] BIOS-e820: 00000000bf782000 - 00000000bf79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7cc000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7cc000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: TOSHIBA Qosmio X505/Qosmio X505, BIOS V2.60 06/11/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6300] f6300
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bf7c6000-bf7cc000
[ 0.000000] RAMDISK: 37d21000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6230 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000bf7eef64 00064 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf7ce000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7cf000 0FBD2 (v02 TOSQCI CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000bf79bfc0 00040
[ 0.000000] ACPI: HPET 00000000bf7fed32 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7fed6a 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 00000000bf7feda6 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf7fee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bf7fee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: DMAR 00000000bf7df000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7cd000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffc000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bf27c
[ 0.000000] 0: 0x000bf282 -> 0x000bf3ec
[ 0.000000] 0: 0x000bf40f -> 0x000bf46f
[ 0.000000] 0: 0x000bf70f -> 0x000bf718
[ 0.000000] 0: 0x000bf71f -> 0x000bf782
[ 0.000000] 0: 0x000bf79f -> 0x000bf7cc
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1045612
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 763168 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
[ 0.000000] PM: Registered nosave memory: 00000000bf3ec000 - 00000000bf40f000
[ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf470000
[ 0.000000] PM: Registered nosave memory: 00000000bf470000 - 00000000bf4f1000
[ 0.000000] PM: Registered nosave memory: 00000000bf4f1000 - 00000000bf70f000
[ 0.000000] PM: Registered nosave memory: 00000000bf718000 - 00000000bf71f000
[ 0.000000] PM: Registered nosave memory: 00000000bf782000 - 00000000bf79f000
[ 0.000000] PM: Registered nosave memory: 00000000bf7cc000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82880 r8192 d23616 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025127
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda6 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4035888k/5242880k available (4537k kernel code, 1060432k absent, 146560k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1729.162 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.42 BogoMIPS (lpj=5763873)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000037] Security Framework initialized
[ 0.000042] AppArmor: AppArmor disabled by boot time parameter
[ 0.000393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001416] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001859] Mount-cache hash table entries: 256
[ 0.002086] Initializing cgroup subsys cpuacct
[ 0.002089] Initializing cgroup subsys memory
[ 0.002097] Initializing cgroup subsys devices
[ 0.002099] Initializing cgroup subsys freezer
[ 0.002101] Initializing cgroup subsys net_cls
[ 0.002103] Initializing cgroup subsys blkio
[ 0.002131] CPU: Physical Processor ID: 0
[ 0.002133] CPU: Processor Core ID: 0
[ 0.002139] mce: CPU supports 9 MCE banks
[ 0.002149] CPU0: Thermal monitoring handled by SMI
[ 0.002156] using mwait in idle threads.
[ 0.003399] ACPI: Core revision 20120320
[ 0.078006] ftrace: allocating 17820 entries in 70 pages
[ 0.090499] DMAR: Host address width 36
[ 0.090501] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.090510] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
[ 0.090513] DMAR: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fefff
[ 0.091060] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.124054] CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz stepping 05
[ 0.229382] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.229388] CPU erratum AAJ80 worked around
[ 0.229390] CPUID marked event: 'bus cycles' unavailable
[ 0.229393] ... version: 3
[ 0.229394] ... bit width: 48
[ 0.229395] ... generic registers: 4
[ 0.229397] ... value mask: 0000ffffffffffff
[ 0.229399] ... max period: 000000007fffffff
[ 0.229400] ... fixed-purpose events: 3
[ 0.229402] ... event mask: 000000070000000f
[ 0.249516] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.269397] Booting Node 0, Processors #1
[ 0.280536] CPU1: Thermal monitoring handled by SMI
[ 0.282640] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.292741] #2
[ 0.303877] CPU2: Thermal monitoring handled by SMI
[ 0.305984] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.319396] #3
[ 0.330532] CPU3: Thermal monitoring handled by SMI
[ 0.332638] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.342719] #4
[ 0.353852] CPU4: Thermal monitoring handled by SMI
[ 0.355956] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.366056] #5
[ 0.377192] CPU5: Thermal monitoring handled by SMI
[ 0.379301] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.392710] #6
[ 0.403843] CPU6: Thermal monitoring handled by SMI
[ 0.405953] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.416041] #7 Ok.
[ 0.427172] CPU7: Thermal monitoring handled by SMI
[ 0.429279] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.429317] Brought up 8 CPUs
[ 0.429319] Total of 8 processors activated (27677.36 BogoMIPS).
[ 0.435425] devtmpfs: initialized
[ 0.436874] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
[ 0.436887] PM: Registering ACPI NVS region [mem 0xbf782000-0xbf79efff] (118784 bytes)
[ 0.437790] NET: Registered protocol family 16
[ 0.437904] ACPI: bus type pci registered
[ 0.437991] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.437995] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.511154] PCI: Using configuration type 1 for base access
[ 0.511883] bio: create slab <bio-0> at 0
[ 0.511944] ACPI: Added _OSI(Module Device)
[ 0.511947] ACPI: Added _OSI(Processor Device)
[ 0.511949] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.511951] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.514367] ACPI: EC: Look up EC in DSDT
[ 0.516773] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.522616] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.523068] ACPI: SSDT 00000000bf71aa98 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.523663] ACPI: Dynamic OEM Table Load:
[ 0.523667] ACPI: SSDT (null) 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.523844] ACPI: SSDT 00000000bf719018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.524426] ACPI: Dynamic OEM Table Load:
[ 0.524429] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.524795] ACPI: SSDT 00000000bf71a718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.525430] ACPI: Dynamic OEM Table Load:
[ 0.525433] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.525614] ACPI: SSDT 00000000bf718d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.526223] ACPI: Dynamic OEM Table Load:
[ 0.526226] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.592282] ACPI: Interpreter enabled
[ 0.592285] ACPI: (supports S0 S3 S4 S5)
[ 0.592311] ACPI: Using IOAPIC for interrupt routing
[ 0.598233] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
[ 0.598514] ACPI: No dock devices found.
[ 0.598518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.598955] \_SB_.PCI0:_OSC invalid UUID
[ 0.598957] _OSC request data:1 8 1f
[ 0.598961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.599649] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.599652] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.599655] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.599658] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.599660] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.599663] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.599666] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.599705] PCI host bridge to bus 0000:00
[ 0.599708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.599710] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.599713] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.599715] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.599717] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.599720] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.599722] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.599734] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[ 0.599797] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.599854] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.599882] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.599947] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.600011] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.600073] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.600134] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.600183] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.600275] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.600302] pci 0000:00:1a.0: reg 10: [mem 0xf0906000-0xf09063ff]
[ 0.600404] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.600445] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.600466] pci 0000:00:1b.0: reg 10: [mem 0xf0900000-0xf0903fff 64bit]
[ 0.600545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.600582] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.600664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.600704] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.600786] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.600823] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.600906] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.600940] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.601022] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.601061] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.601088] pci 0000:00:1d.0: reg 10: [mem 0xf0907000-0xf09073ff]
[ 0.601190] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.601230] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.601314] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
[ 0.601463] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.601488] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
[ 0.601501] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
[ 0.601514] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
[ 0.601527] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
[ 0.601541] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
[ 0.601554] pci 0000:00:1f.2: reg 24: [mem 0xf0908000-0xf09087ff]
[ 0.601612] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.601644] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.601665] pci 0000:00:1f.3: reg 10: [mem 0xf0909000-0xf09090ff 64bit]
[ 0.601692] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.601781] pci 0000:01:00.0: [10de:0cb1] type 00 class 0x030000
[ 0.601793] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
[ 0.601805] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.601818] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.601827] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.601836] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.601895] pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
[ 0.601907] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
[ 0.602005] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.602009] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.602013] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.602018] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.602068] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[ 0.602077] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.602086] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.602097] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.602174] pci 0000:07:00.0: [1217:10f7] type 00 class 0x0c0010
[ 0.602196] pci 0000:07:00.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.602327] pci 0000:07:00.0: supports D1 D2
[ 0.602329] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.602380] pci 0000:07:00.1: [1217:8120] type 00 class 0x080501
[ 0.602402] pci 0000:07:00.1: reg 10: [mem 0xf0501000-0xf05010ff]
[ 0.602533] pci 0000:07:00.1: supports D1 D2
[ 0.602535] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.602597] pci 0000:07:00.2: [1217:8130] type 00 class 0x018000
[ 0.602619] pci 0000:07:00.2: reg 10: [mem 0xf0503000-0xf0503fff]
[ 0.602647] pci 0000:07:00.2: reg 18: [mem 0xf0502000-0xf05027ff]
[ 0.602758] pci 0000:07:00.2: supports D1 D2
[ 0.602760] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.612633] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[ 0.612644] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.612728] pci 0000:0a:00.0: [10ec:8172] type 00 class 0x028000
[ 0.612750] pci 0000:0a:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.612767] pci 0000:0a:00.0: reg 14: [mem 0xf0600000-0xf0603fff]
[ 0.612884] pci 0000:0a:00.0: supports D1 D2
[ 0.612887] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.622602] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 0.622621] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.622630] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.622707] pci 0000:0b:00.0: [1969:1063] type 00 class 0x020000
[ 0.622736] pci 0000:0b:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.622753] pci 0000:0b:00.0: reg 18: [io 0x5000-0x507f]
[ 0.622870] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.632604] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
[ 0.632622] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
[ 0.632631] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.632711] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.632725] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.632728] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.632731] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.632733] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.632736] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.632739] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.632742] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.632778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.632953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.633024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.633153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.633220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.633284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.633347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 0.633449] \_SB_.PCI0:_OSC invalid UUID
[ 0.633451] _OSC request data:1 1f 1f
[ 0.633455] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.633495] \_SB_.PCI0:_OSC invalid UUID
[ 0.633497] _OSC request data:1 0 1d
[ 0.633501] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.633503] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.639419] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.639461] PCI host bridge to bus 0000:ff
[ 0.639468] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
[ 0.639491] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[ 0.639516] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[ 0.639537] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[ 0.639560] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[ 0.639582] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[ 0.639605] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.639628] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.639649] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.639670] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.639691] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.639714] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.639735] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.639757] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[ 0.639779] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[ 0.639820] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.639823] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.639825] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.640363] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.640427] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.640488] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.640549] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.640609] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.640673] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.640735] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.640799] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.640906] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.640915] vgaarb: loaded
[ 0.640916] vgaarb: bridge control possible 0000:01:00.0
[ 0.640960] PCI: Using ACPI for IRQ routing
[ 0.647549] PCI: pci_cache_line_size set to 64 bytes
[ 0.647793] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.647795] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[ 0.647800] reserve RAM buffer: 00000000bf3ec000 - 00000000bfffffff
[ 0.647804] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[ 0.647807] reserve RAM buffer: 00000000bf718000 - 00000000bfffffff
[ 0.647810] reserve RAM buffer: 00000000bf782000 - 00000000bfffffff
[ 0.647813] reserve RAM buffer: 00000000bf7cc000 - 00000000bfffffff
[ 0.647816] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.647914] NetLabel: Initializing
[ 0.647916] NetLabel: domain hash size = 128
[ 0.647917] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.647930] NetLabel: unlabeled traffic allowed by default
[ 0.647984] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.647994] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.648001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.652683] hpet: hpet2 irq 40 for MSI
[ 0.655983] hpet: hpet3 irq 41 for MSI
[ 0.659437] hpet: hpet4 irq 42 for MSI
[ 0.662806] hpet: hpet5 irq 43 for MSI
[ 0.666188] hpet: hpet6 irq 44 for MSI
[ 0.679597] Switching to clocksource hpet
[ 0.685694] pnp: PnP ACPI init
[ 0.685711] ACPI: bus type pnp registered
[ 0.686108] pnp 00:00: [bus 00-fe]
[ 0.686111] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.686113] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.686115] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.686118] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.686120] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.686123] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.686125] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.686127] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.686129] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.686132] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.686134] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.686136] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.686138] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.686140] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.686143] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.686145] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.686147] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.686149] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.686152] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.686215] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.686395] pnp 00:01: [io 0x0000-0x001f]
[ 0.686423] pnp 00:01: [io 0x0081-0x0091]
[ 0.686425] pnp 00:01: [io 0x0093-0x009f]
[ 0.686426] pnp 00:01: [io 0x00c0-0x00df]
[ 0.686429] pnp 00:01: [dma 4]
[ 0.686461] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.686568] pnp 00:02: [irq 0 disabled]
[ 0.686578] pnp 00:02: [irq 8]
[ 0.686580] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.686614] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.686626] pnp 00:03: [io 0x00f0]
[ 0.686635] pnp 00:03: [irq 13]
[ 0.686664] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.686677] pnp 00:04: [io 0x002e-0x002f]
[ 0.686679] pnp 00:04: [io 0x004e-0x004f]
[ 0.686681] pnp 00:04: [io 0x0061]
[ 0.686683] pnp 00:04: [io 0x0063]
[ 0.686684] pnp 00:04: [io 0x0065]
[ 0.686686] pnp 00:04: [io 0x0067]
[ 0.686688] pnp 00:04: [io 0x0068]
[ 0.686692] pnp 00:04: [io 0x006c]
[ 0.686693] pnp 00:04: [io 0x0070]
[ 0.686695] pnp 00:04: [io 0x0080]
[ 0.686697] pnp 00:04: [io 0x0092]
[ 0.686699] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.686701] pnp 00:04: [io 0x03e0-0x03e1]
[ 0.686703] pnp 00:04: [io 0x0680-0x069f]
[ 0.686704] pnp 00:04: [io 0x0500-0x050f]
[ 0.686706] pnp 00:04: [io 0x0600-0x0603]
[ 0.686708] pnp 00:04: [io 0xffff]
[ 0.686710] pnp 00:04: [io 0x0400-0x047f]
[ 0.686712] pnp 00:04: [io 0x1180-0x11ff]
[ 0.686714] pnp 00:04: [io 0x164e-0x164f]
[ 0.686716] pnp 00:04: [io 0xfe00]
[ 0.686787] system 00:04: [io 0x03e0-0x03e1] has been reserved
[ 0.686790] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.686792] system 00:04: [io 0x0500-0x050f] has been reserved
[ 0.686795] system 00:04: [io 0x0600-0x0603] has been reserved
[ 0.686798] system 00:04: [io 0xffff] has been reserved
[ 0.686801] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.686803] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.686806] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.686808] system 00:04: [io 0xfe00] has been reserved
[ 0.686812] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.686855] pnp 00:05: [io 0x0070-0x0077]
[ 0.686887] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.687090] pnp 00:06: [io 0x0060]
[ 0.687092] pnp 00:06: [io 0x0064]
[ 0.687102] pnp 00:06: [irq 1]
[ 0.687136] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.687159] pnp 00:07: [irq 12]
[ 0.687192] pnp 00:07: Plug and Play ACPI device, IDs SYN102f SYN1000 SYN0002 PNP0f13 (active)
[ 0.687294] pnp 00:08: [mem 0xf0501100-0xf05013ff]
[ 0.687304] pnp 00:08: disabling [mem 0xf0501100-0xf05013ff] because it overlaps 0000:00:1c.3 BAR 14 [mem 0xf0500000-0xf05fffff]
[ 0.687363] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.687680] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.687682] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.687685] pnp 00:09: [mem 0xfed1b000-0xfed1bfff]
[ 0.687687] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.687689] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.687692] pnp 00:09: [mem 0xf090a000-0xf090afff]
[ 0.687694] pnp 00:09: [mem 0xc0000000-0xc0000fff]
[ 0.687696] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.687698] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.687700] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[ 0.687702] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.687704] pnp 00:09: [mem 0xff808000-0xff8080ff]
[ 0.687706] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.687708] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.687789] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.687792] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.687795] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.687798] system 00:09: [mem 0xf090a000-0xf090afff] has been reserved
[ 0.687801] system 00:09: [mem 0xc0000000-0xc0000fff] has been reserved
[ 0.687804] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.687807] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.687809] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.687812] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.687815] system 00:09: [mem 0xff808000-0xff8080ff] has been reserved
[ 0.687818] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.687821] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.687825] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.687979] pnp 00:0a: [bus ff]
[ 0.688027] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.688111] pnp: PnP ACPI: found 11 devices
[ 0.688112] ACPI: ACPI bus type pnp unregistered
[ 0.695455] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 07-07] add_size 1000
[ 0.695460] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
[ 0.695474] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a-0a] add_size 200000
[ 0.695489] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000
[ 0.695507] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.695511] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.695514] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.695517] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.695523] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.695528] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0300000-0xc04fffff 64bit pref]
[ 0.695532] pci 0000:00:1c.6: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.695536] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.695540] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.695544] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.695547] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.695552] pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.695556] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.695561] pci 0000:00:1c.0: PCI bridge to [bus 02-04]
[ 0.695566] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.695576] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.695585] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.695597] pci 0000:07:00.0: BAR 0: assigned [mem 0xf0500000-0xf0500fff]
[ 0.695606] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[ 0.695614] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.695623] pci 0000:00:1c.3: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.695632] pci 0000:00:1c.3: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.695643] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 0.695651] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.695661] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.695670] pci 0000:00:1c.4: bridge window [mem 0xc0300000-0xc04fffff 64bit pref]
[ 0.695681] pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
[ 0.695689] pci 0000:00:1c.6: bridge window [io 0x5000-0x5fff]
[ 0.695699] pci 0000:00:1c.6: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.695708] pci 0000:00:1c.6: bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.695719] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 0.695810] pci 0000:00:1e.0: setting latency timer to 64
[ 0.695819] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.695822] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.695824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.695827] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.695829] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.695832] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.695834] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.695837] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.695839] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.695842] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.695844] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.695847] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.695849] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
[ 0.695852] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.695854] pci_bus 0000:07: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.695857] pci_bus 0000:07: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
[ 0.695860] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
[ 0.695862] pci_bus 0000:0a: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.695865] pci_bus 0000:0a: resource 2 [mem 0xc0300000-0xc04fffff 64bit pref]
[ 0.695867] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
[ 0.695870] pci_bus 0000:0b: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.695872] pci_bus 0000:0b: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[ 0.695875] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.695877] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 0.695880] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.695882] pci_bus 0000:0c: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.695885] pci_bus 0000:0c: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.695887] pci_bus 0000:0c: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.695889] pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.695937] NET: Registered protocol family 2
[ 0.696062] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.696834] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.700123] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.700521] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.700523] TCP: reno registered
[ 0.700532] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.700576] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.700689] NET: Registered protocol family 1
[ 0.700925] pci 0000:01:00.0: Boot video device
[ 0.700998] PCI: CLS 64 bytes, default 64
[ 0.701042] Unpacking initramfs...
[ 0.770927] Freeing initrd memory: 2876k freed
[ 0.771345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.771348] Placing 64MB software IO TLB between ffff8800bb27c000 - ffff8800bf27c000
[ 0.771350] software IO TLB at phys 0xbb27c000 - 0xbf27c000
[ 0.771376] Simple Boot Flag at 0x36 set to 0x1
[ 0.772092] audit: initializing netlink socket (disabled)
[ 0.772103] type=2000 audit(1340054803.739:1): initialized
[ 0.772500] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.774515] VFS: Disk quotas dquot_6.5.2
[ 0.774565] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.774667] msgmni has been set to 7888
[ 0.774904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.774945] io scheduler noop registered
[ 0.774947] io scheduler deadline registered
[ 0.775005] io scheduler cfq registered (default)
[ 0.775409] intel_idle: MWAIT substates: 0x1120
[ 0.775425] intel_idle: v0.4 model 0x1E
[ 0.775426] intel_idle: lapic_timer_reliable_states 0x2
[ 0.775522] GHES: HEST is not enabled!
[ 0.775587] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.776198] Linux agpgart interface v0.103
[ 0.776298] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.778912] i8042: Detected active multiplexing controller, rev 1.1
[ 0.780103] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.780135] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.780159] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.780182] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.780206] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.780325] mousedev: PS/2 mouse device common for all mice
[ 0.780386] rtc_cmos 00:05: RTC can wake from S4
[ 0.780540] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.780579] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.780731] cpuidle: using governor ladder
[ 0.780936] cpuidle: using governor menu
[ 0.781081] TCP: cubic registered
[ 0.781191] NET: Registered protocol family 10
[ 0.781396] NET: Registered protocol family 17
[ 0.781401] Registering the dns_resolver key type
[ 0.781617] PM: Hibernation image not present or could not be loaded.
[ 0.781628] registered taskstats version 1
[ 0.782385] rtc_cmos 00:05: setting system clock to 2012-06-18 21:26:43 UTC (1340054803)
[ 0.782538] Initializing network drop monitor service
[ 0.787227] Freeing unused kernel memory: 740k freed
[ 0.787390] Write protecting the kernel read-only data: 8192k
[ 0.798480] Freeing unused kernel memory: 1588k freed
[ 0.803291] Freeing unused kernel memory: 640k freed
[ 0.809999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.820218] udevd[71]: starting version 185
[ 0.862439] usbcore: registered new interface driver usbfs
[ 0.862464] usbcore: registered new interface driver hub
[ 0.862584] usbcore: registered new device driver usb
[ 0.864859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.864926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.864935] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.864962] SCSI subsystem initialized
[ 0.864965] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.865005] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.869004] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.869030] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0906000
[ 0.871261] libata version 3.00 loaded.
[ 0.876370] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.876586] hub 1-0:1.0: USB hub found
[ 0.876591] hub 1-0:1.0: 3 ports detected
[ 0.876821] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.876830] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.876839] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.876872] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.880874] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.880892] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0907000
[ 0.889704] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.890152] hub 2-0:1.0: USB hub found
[ 0.890161] hub 2-0:1.0: 3 ports detected
[ 0.890447] ahci 0000:00:1f.2: version 3.0
[ 0.890546] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.890615] ahci: SSS flag set, parallel bus scan disabled
[ 0.890674] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x39 impl SATA mode
[ 0.890686] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 0.890697] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.911919] scsi0 : ahci
[ 0.912284] scsi1 : ahci
[ 0.912722] scsi2 : ahci
[ 0.913201] scsi3 : ahci
[ 0.913668] scsi4 : ahci
[ 0.914080] scsi5 : ahci
[ 0.914267] ata1: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908100 irq 45
[ 0.914274] ata2: DUMMY
[ 0.914277] ata3: DUMMY
[ 0.914288] ata4: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908280 irq 45
[ 0.914297] ata5: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908300 irq 45
[ 0.914305] ata6: SATA max UDMA/133 abar m2048@0xf0908000 port 0xf0908380 irq 45
[ 1.183077] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.233004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.234228] ata1.00: ATA-8: Hitachi HTS725050A9A360, PC4OC71E, max UDMA/133
[ 1.234236] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.235728] ata1.00: configured for UDMA/133
[ 1.236338] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
[ 1.307636] hub 1-1:1.0: USB hub found
[ 1.307879] hub 1-1:1.0: 6 ports detected
[ 1.416267] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.540814] hub 2-1:1.0: USB hub found
[ 1.540943] hub 2-1:1.0: 8 ports detected
[ 1.556222] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.609698] usb 1-1.6: new high-speed USB device number 3 using ehci_hcd
[ 1.696049] hub 1-1.6:1.0: USB hub found
[ 1.696420] hub 1-1.6:1.0: 4 ports detected
[ 1.772758] Refined TSC clocksource calibration: 1728.999 MHz.
[ 1.772767] Switching to clocksource tsc
[ 1.806556] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[ 1.876031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.877305] ata5.00: ATAPI: MATSHITABD-CMB UJ141EL, 1.00, max UDMA/100
[ 1.879554] ata5.00: configured for UDMA/100
[ 1.885075] scsi 4:0:0:0: CD-ROM MATSHITA BD-CMB UJ141EL 1.00 PQ: 0 ANSI: 5
[ 1.963102] usb 1-1.6.3: new low-speed USB device number 4 using ehci_hcd
[ 2.081481] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.0/input/input1
[ 2.081639] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input0
[ 2.087742] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.1/input/input2
[ 2.087898] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.6.3/input1
[ 2.087938] usbcore: registered new interface driver usbhid
[ 2.087942] usbhid: USB HID core driver
[ 2.122996] usb 1-1.6.4: new full-speed USB device number 5 using ehci_hcd
[ 2.202563] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.212058] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.212151] sd 0:0:0:0: [sda] Write Protect is off
[ 2.212155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.212192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.212943] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.4/1-1.6.4:1.0/input/input3
[ 2.213029] generic-usb 0003:1532:0016.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1a.0-1.6.4/input0
[ 2.216135] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.216142] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.216400] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.289258] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 2.292307] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.310870] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.444092] udevd[177]: starting version 185
[ 5.002214] loop: module loaded
[ 5.065477] vboxdrv: Found 8 processor cores.
[ 5.066064] VBoxDrv: dbg - g_abExecMemory=ffffffffa01d0080
[ 5.068417] vboxdrv: fAsync=0 offMin=0x19f offMax=0x349c9
[ 5.068586] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.068591] vboxdrv: Successfully loaded version 4.1.16_OSE (interface 0x00190000).
[ 5.281919] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 5.291812] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 5.291980] ACPI: Power Button [PWRB]
[ 5.292078] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 5.293167] ACPI: Lid Switch [LID]
[ 5.293233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.293269] ACPI: Power Button [PWRF]
[ 5.337928] firewire_ohci 0000:07:00.0: enabling device (0104 -> 0106)
[ 5.391330] firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[ 5.392558] EDAC MC: Ver: 2.1.0
[ 5.393911] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[ 5.403663] iTCO_vendor_support: vendor-support=0
[ 5.414889] atl1c 0000:0b:00.0: version 1.0.1.0-NAPI
[ 5.420966] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.421163] iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460)
[ 5.421406] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.486165] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
[ 5.489677] cfg80211: Calling CRDA to update world regulatory domain
[ 5.493598] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
[ 5.494085] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
[ 5.494588] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
[ 5.494973] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
[ 5.495403] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
[ 5.495752] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
[ 5.496144] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
[ 5.496599] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.505428] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.522793] ACPI: AC Adapter [ACAD] (on-line)
[ 5.523752] acpi device:02: registered as cooling_device0
[ 5.523855] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 5.523909] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.526016] ACPI: Requesting acpi_cpufreq
[ 5.536953] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 5.536961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.626562] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.626568] ACPI: Thermal Zone [THRM] (58 C)
[ 5.891343] firewire_core 0000:07:00.0: created device fw0: GUID 01cf13fe00000700, S400
[ 5.971026] ACPI: Battery Slot [BAT1] (battery present)
[ 5.972094] wmi: Mapper loaded
[ 6.108672] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 6.113558] input: Toshiba input device as /devices/virtual/input/input9
[ 6.124400] sdhci: Secure Digital Host Controller Interface driver
[ 6.124402] sdhci: Copyright(c) Pierre Ossman
[ 6.172992] nvidia: module license 'NVIDIA' taints kernel.
[ 6.172995] Disabling lock debugging due to kernel taint
[ 6.181396] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 6.181403] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 6.181419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.181624] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
[ 6.186591] Registered led device: toshiba::illumination
[ 6.190693] sdhci-pci 0000:07:00.1: SDHCI controller found [1217:8120] (rev 1)
[ 6.190943] Registered led device: mmc0::
[ 6.192014] mmc0: SDHCI controller on PCI [0000:07:00.1] using ADMA
[ 6.228634] rtl8192se: FW Power Save off (module option)
[ 6.228664] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[ 6.228665] Loading firmware rtlwifi/rtl8192sefw.bin
[ 6.251712] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 6.262400] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 6.317500] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.320857] hda_intel: Disabling MSI
[ 6.427141] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0000
[ 6.469682] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 6.717972] Linux media interface: v0.10
[ 6.729300] Linux video capture interface: v2.00
[ 6.997745] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
[ 7.020114] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input12
[ 7.020201] usbcore: registered new interface driver uvcvideo
[ 7.020204] USB Video Class driver (1.1.1)
[ 7.153982] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
[ 7.154292] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
[ 7.154446] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
[ 7.154578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
[ 13.241349] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 13.273608] EXT4-fs (sda5): mounted finTia89 wrote:try to downgrade the kernel with a working version
Thanks for your reply! Actually, yesterday I upgraded to the new kernel (version 3.4.3-1) and my laptop has not freezed since then. So, maybe I will wait for a couple of days and hopefully mark this as solved. -
Toshiba Qosmio X505 plugged in, not charging message
I have a Toshiba Qosmio X505 that is almost 4 years old and have some power issues. The battery is drained to about 6% and the battery icon in the tool bar has the plug symbol for a second then it goes away then comes back and goes away.... it keeps flashing like this. When I move the mouse over the battery icon it says plugged in, not charging. I have tried every solution I have found on line with no luck. I have removed the battery and ac charger and then held the power button for 30 seconds, I have cleaned the connections, I have re-installed the battery about 10 times, I have rebooted all to no avail.
When I remove the ac adapter the power light is off and the battery light is orange. When I remove the battery and plug in the ac adapter the power light is steady red. As soon as I put the battery in the ac power light begins to blink on and off. The computer does not power on with the battery removed and the ac adapter plugged in (but I'm not sure if it's supposed to). I will also add that in the last week or so when I power on I would get a black screen saying an NTFS file is bad and the machine wants to do a disk check. The disk check never runs, even when I try to do it manually.
I have read this could be a motherboard issue, an ac adapter issue, or a battery issue. I am hopoing a replacement battery fixes the problem. Before buying a battery I was hoping someone had some info to share. ThanksI bought a battery hoping that takes care of the problem. If that doesn't work I will try a new adapter and if that doesn't work I will probably just remove the hard drive and use it as an external on a new machine. Seems there really isn't a whole lot of info out there about this problem other than the start button solution.
-
BlueTooth can not find any device or cell - TOSHIBA Qosmio X505-Q894
I have a TOSHIBA Qosmio X505-Q894 win 7 64 bit My Bluetooth will NOT find any devices.... Including my phone, HTC evo 4g. I'm at a coffee shop and my phone sees 6+ items and my PC sees none I have uninstalled all the Bluetooth devices in Device Manager and reinstalled Toshiba Stack 6.4 and 7.xx differenttimes. I also have turned off "auto windows driver update" so it didn't interfer with the toshiba download drivers. I have made my phone discoverable and also my phone does not see my laptop even....
THE actual problem - WILL NOT detect anything. http://official3.com/toshiba/wififail.gif
PICTURE OF my F8 controls http://official3.com/toshiba/F8.gif
My Device Manager - everything is "working" http://official3.com/toshiba/device-manager.gif
Bluetooth logo in corner. http://official3.com/toshiba/wififailcorner.gifAnyone? Please help!
-
What happened to the Toshiba Qosmio x505??
What happened to the Toshiba Qosmio x505?
I have the x300 17" and I love it but need to upgrade.
It was on the website for a week for a preorder and then it was gone and hasn't come back I was thinking of getting it from BB but now its gone.
Where is it,is it coming back and when? I think its one of the best 18.4" Laptops out there overall.Yeah, it really sucks.. The best laptop I can find at BB is the HP i7 for $1299.. Which has a really crappy trackpad and only a nvidia 230.. It was the *only* i7 cpu w/ 17"+ at my local BB.. I signed up for a $5000 BB card just to buy a new laptop, and now I can't find one I like. I'd buy the toshiba 505 in a heartbeat. Newbegg has them in stock, so if the toshiba doesn't appear at BB in the next couple weeks or so, I'm just gonna cancel this new BB card and buy it from newbegg, they have a 12mo 0% interest deal going on now too.
-
Toshiba Qosmio x505-q870 Issues
Hi, i'm a proud owner of this laptop and its served me very well for the past 3 years.
Recently i'm having some heat issues where i think the computer is starting to hang/freeze around 75c. I've checked some other forums and folks say thermal shutdown is MUCH higher than that so i'm kinda curious at why its happening. Naturally i've cleaned out all the vents, got a laptop cooler, got rid of as much bloatware, and minimized my HDD usage for as much efficiency as i can squeeze out of the machine. Not too sure what the next step would be to try to minimize the heat. At rest with the cooler fan i'm looking at 50c while during intense gaming 65-75c, which is where the freezing, BSOD, and other bad things occur.
I've also ugraded my RAM. i bought 2 sticks of 4 gig Patriot PC3-12800 1600 MHz CL11 1.35v RAM, which are technically compatible as they are the same speed and size as the ram also sold via the Toshiba website. My first game with the new RAM showed massive improvement in FPS. However shortly into the next round it froze up where i needed to do a cold shutdown. Thinking nothing of it, I restarted and began another game and the same thing happened again where it froze. After that point i stopped to reassess my options. Heat was also extremely high, but that was nothing out of the norm for my current situation.
After some quick research on what i shoud do, i ran Memtest86 which came back clean after 20 passes, updated my BIOs from v2.3 to v2.9, and tried to get into the BIOs to try to change the voltage being sent into the RAM. My old ram had 1.5v while the new ones were at 1.35v. I ran the program cpu-z to see what voltage it was being run at, and it was set at 1.28v so apparently there's something going on. Unfortunately in the BIOs i couldnt find how to change the voltage settings, so i'm currently at a loss what to do. Some more reading has brought to my attention that the fans might not also be working at full capacity. I also tried to see how i can adjust my fan speeds in the BIOs and again came to a loss.
What do i do to try to minimize my heat burden and try to get my RAM integrated smoothly?Qosmio X505-Q870 Specifications
Qosmio X505-Q870 Downloads
Event ID: 9 Source: iaStor
Let's try to reinstall your core chipset & HDD driver set. Download these files to your desktop and double click to install them in this order:
Intel Chipset SW Installation Utility
Intel Rapid Storage Technology Driver
See if this improves the situation at all. Please let us know what happens. Good luck.
Mike -
Toshiba Qosmio X505-Q720 Screen Problem when Tilting
Toshiba Laptop Qosmio X505-Q720
Please, help !
The screen goes blank at certain (more than 90deg) angles of the screen with respect to the base of my laptop.
The Web Camera is also not working.
An external monitor works perfectly.
I assume some connecting cables are loose behind the screen.
Can I fix this issue myself ?Good job on the diagnosis. Sounds like either a loose cable or the cable is damaged and loses the connection once you tilt the screen too far. My recommendation would be to take it into a Toshiba authorized repair center and get it serviced. A couple reasons, they have the Maintenance Manuals and know how to service the computer and two, they can order the right parts if needed. The reasons for not servicing this yourself is that the LCD screen is an expensive part to replace and these laptops with their small parts can be a problem to work on.
-
Toshiba Qosmio X505-Q870 power button unresponsive but laptop powers up using media control button
Well this is perplexing, I could really use some help.
My power button on my Qosmio X505-Q870 is completely unresponsive. I've tried holding it for 30 seconds, but to no avail. I removed the battery & replaced the battery, testing the power button by pressing it for 30 seconds or rapidly pressing it - makes no difference whatsoever. But then, I noticed if I touch the media touch button, the computer powers up! (And opens up Windows Media Player) Very stealthy...
Now when the laptop is already powered up, pressing the media button does not turn it off. It only opens Windows Media Player.
Here is some background info that may or may not be helpful:
1 1/2 years ago:
RAM was upgraded to 8 MB
I replaced the HDD with a SSD, and then installed the HDD into the 2nd bay.
Computer has been running fine since these changes, aside from running hot when gaming.
2 days ago:
I upgraded the SSD to a larger drive.
Then, I disassembled the laptop with the intent to apply some thermal compound and clean the fans to address the temperature issues. I could not complete this task because 2 screws were stripped and I couldn't get the cover off, afterall.
I did not swap any connections, but did notice one seemed a bit loose after carefully lifting up the keyboard so I gently eased it back in to place.
I put the laptop back together, and that is when the power button and media center button issue began. So it must be a result of either opening the case or upgrading the SSD.
Any thoughts on what could be causing this to happen?
And if anyone has a trick to remove stripped screws without taking a drill to my laptop - I'd love to hear your ideas. Thanks!!nTia89 wrote:try to downgrade the kernel with a working version
Thanks for your reply! Actually, yesterday I upgraded to the new kernel (version 3.4.3-1) and my laptop has not freezed since then. So, maybe I will wait for a couple of days and hopefully mark this as solved. -
Toshiba Qosmio x505-q870 error iaStor event ID: 9
I have attached the error at the bottom of the message that i am getting from my computer. I have seen this error on desktops and had to change a power connection to the hard drives. I have not had this on my laptop before. Since this error has started i have had times where the computer freezes for about 2 mins and than comes back up like nothing happened. I need to know what is going on. If you have any ideas please let me know.
Thank you
Log Name: System
Source: iaStor
Date: 5/1/2012 10:19:43 PM
Event ID: 9
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Description:
The device, \Device\Ide\iaStor0, did not respond within the timeout period.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="iaStor" />
<EventID Qualifiers="49156">9</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-05-02T05:19:43.788089700Z" />
<EventRecordID>72151</EventRecordID>
<Channel>System</Channel>
<Security />
</System>
<EventData>
<Data>\Device\Ide\iaStor0</Data>
<Binary>0F0005000100000000000000090004C00100000000000000000000000000000000000000000000000000000001</Binary>
</EventData>
</Event>Qosmio X505-Q870 Specifications
Qosmio X505-Q870 Downloads
Event ID: 9 Source: iaStor
Let's try to reinstall your core chipset & HDD driver set. Download these files to your desktop and double click to install them in this order:
Intel Chipset SW Installation Utility
Intel Rapid Storage Technology Driver
See if this improves the situation at all. Please let us know what happens. Good luck.
Mike -
Toshiba Qosmio X505 Q8102 freezes every few seconds in games.
Again i have to post in this forums, so im not satisfied and dissapointed..
The laptop is freezing every few seconds in most 3D games, i thought it's the OS problem, so installed a fresh copy of Windows7 (original), downloaded newest drivers from toshiba support site, and installed every one of the without problem. But the problem is still here.. Don't know what to do, gave 1800$ for this pice of junk and ill i got is problems..
I'm not a newbie within computers, working with them for past 15 years (at the moment Network Administrator in Croatian Military).
Tried replacing the memory, hdd, and still nothing, same problem.. The warranty expired and doesn't work in Europe.. Contacted US support and asked for recovery disks because this **bleep** recovery partition is damaged and can't boot from recovery.. tried with Toshiba media builder but same problem, doesn't work -_-... One thing is for sure.. im never gonna buy Toshiba again. Oh yeah, forggot tu mention, I've contacted Toshiba Croatia for recovery disks and support, and they said to me that thy don't give recovery disks and don't sell them (than why can i buy recovery dvd's from toshiba us?, and can't from Croatia)..
Anyway, if no one can tell me any solution it will be crashed with hammer and burn it (because i have no nerves for it any more).. I use the laptop very often and i need it for my job..
Before i buyed this laptop i was in doubt, buy toshiba or alienware? Hmm, made a huge mistake..
Thank you in advance and hope someone can tell me anny solution..
LukaSorry for late reply, i was away and without internet ...
Yeah, i know the procedure with the zerro key, and with toshiba media creator to make backup dvd-s etc, but non of that work because my recovery partition is kinda damaged, don't know why is that so. Didn't mess with the hdd or anything else. But that's not the problem, installed a fresh copy of windows, updated it and installed drivers and everything i need, than made a acronis secure zone on my hdd and made recovery by my self and works great.
But bigger problem is why the hell is he freezing every now and than in games, just stops for half of a second and than continues normaly for few seconds, another thing, while its frozen the sound freezes aswell, tried another sound driver, updated everything and still got same problem.. -
i am going to buy this laptop from bestbuy but i dont want it with a fingerprint scanner in the middle of the mouse buttons or even there at all because it makes use hard and gaming harder is there anyway i can get it without the scanner
Agreed.
Now you say the reason you don't want it is because it makes use/gaming difficult. Does it physically make it hard to use or because you keep tripping off the scanner? If it is the latter, I believe that it is possible to disable the scanner completely.
I can understand how you might trip it off if you are doing some work in an airplane or car, but why not buy a mouse to use anyway? I believe Toshiba usually offers you some credit towards the Toshiba store when you buy a computer (they did with me) making you able to buy one of their mini mouses. -
Toshiba Qosmio x505 Q870 problem.
I have just installed Battlefield 3 , and i was playing for a while untill my screen went off.
when the screen turned off i was able to hear a loud sound from the laptop might be caused by either the DVD or by some fan inside (I am not sure)
i tried to normally press the shutdown button (Physical touch button on the left side of my keyboard) and then i tried holding it down for a few seconds to force shotdown more than once.
nothing happened.
I also tried also to press the button NUM LOCK and there was no response.
After a while 10~50mins i found the laptop on the login to windows account screen , and then i logged in and typed in this post
This was the first time such a thing ever happens with me , and i am looking for any explanations and suggestionsI just updated my Video card , and then i started playing BFBC2 with a heat monitoring program on.
CPU cores were at 94 (MAX)
and the GPU were at 70 (MAX).
I am a little bit worried and i would appreciate it to know what did happen exactly -
Toshiba Qosmio X505 Q894 Wireless update
I'm looking for wirels update, please, driver installed are:
Real RTL8191SE Wireless LAN 802.11n PCI-E NIC
Driver Date 6.20.11
Version-2020.4.620.2011
I have being looking for thes upodate but i don't see any! all updates are from 2009 below.
Thank you for you help.
Note:
Devise manager, Real RTL8191SE Wireless LAN 802.11n PCI-E NIC
Properties, Advanced TAB
I have below setting:
802.11d = Disable
Option's are:
Associated power save
Beacon Interval
Presamble Mode
Roaming Sesitivity Level
TX Power Leve
Wireless Mode
Question:
What option will be best otiption by Using WIFI, please?
Thank you fro youre support to my questionYou are reading the wrong instructions. Peter gave you a link to here.
From there you can download the self-extracting file qx33v290.exe to your hard drive (use Save As - not Run).
When you execute it, several files will appear in a folder you can choose using the Browse button.
Open the file readme.txt (attached) for instructions. I recommend you choose the third option and install from the bootable BIOS installation CD instead of from within Windows.
-Jerry
Attachments:
readme.txt 16 KB -
Qosmio X505-Q8102 USB Ports Question...
I been having trouble with my USB Ports and only one that seems to be working is the Sleep/Charge one on the left side. Others don't seem to work. I checked Device Manager and there seems to be no problems... Anything I can do? Thoughts appreciated
P.S. There are 4 USB Ports, 2 on each side (1 Sleep/Charge, 3 Normal)
Qosmio X870-BT3G23Qosmio X505-Q8102X Specifications
Qosmio X505-Q8102X Downloads
Try this Microsoft Fix It:
Tips for solving problems with USB devices
If this doesn't work then try this:
I would suggest you to uninstall the USB hubs/controller from the device manager and check. Follow the steps mentioned below.
a. Click on Start menu and type in Device Manager in the start search box and press Enter
b. Click on Universal Serial Bus Controllers (USB) and expand the list.
c. Right click on the USB hubs and select uninstall and uninstall it form the system.
d. Restart the computer.
Please let us know what happens. Good luck.
Mike
Maybe you are looking for
-
Query HINT help requested Pls.
A query thus: SELECT equipment_id, vsemml.stock_equipment_id, game_ware_id FROM v_stocked_equipment_inven_his vsdeih, v_stock_equipment_mod_man_list vsemml WHERE vsemml.stock_equipment_id = vsdeih.stock_equipment_id(+) AND equipment_status_code IN ('
-
Arbitrary waveform generation from large text file
Hello, I'm trying to use a PXI 6733 card hooked up to a BNC 2110 in a PXI 1031-DC chassis to output arbitrary waveforms at a sample rate of 100kS/s. The types of waveforms I want to generate are generally going to be sine waves of frequencies less t
-
Consistently being prompted to enter Apple ID for iCloud and iTunes
Hi, I have an iPhone 4 and an iPod touch 5th gen. I'm consistently being asked to prompted to enter my password for my Apple ID for either iTunes or iCloud. I never had this issues until I updates to iOS 7.0.2 on my iPhone. I have a different apple i
-
Devices Not Showing Up in Device Manager After WinXP Install
I installed Windows XP Professional CD after re-formatting and partitioning the hard drive in my ThinkPad T42 (2378-FVU). After finishing the install and running Windows Update for an eternity, Device Manager still can't detect several items. (I was
-
Hey once again the same old question: Whats the difference between count(1) vs count(*) I have read this through many forums and looks like there's no difference and more specifically with latest version of database Optimizer is smart enough to trans