Toshiba satelite E45-B4200 wont boot up

Hi , I recently bought my Toshiba satelite E45-B4200. Unfortunately for last couple of days my system wont boot up. I dont think its a windows issue beacause i dont even see the toshiba logo which usually shows while booting up the system. When i power it on, The LED light around power button lights up for a second and then turns off autometically and nothing happens. Here is what i already tried : 1. Pressed the Power button for more than 30 Second while charging adopter was connected.( Power light indicator at the front blinked once)2. Tried pressing Power button for more than 30 Second disconnecting the power adopter. ( Power light indicator at the front blinked once)3. Removed battery and connected to power adopter only then tried booting up . Did not work as well . I was trying to access the RAM inside but it turns out there was no easy access. Can anyone help me out to reslove this please? Does anyone have a disassemble guide or a Video tutorial ? TIA

Sounds like you may have a short in the motherboard, you may also have a bad charger. If the battery is too low it can cause these symptoms. I would try to obtain another power supply and attempt to turn it on with it, If that fails I would send it in for repair.

Similar Messages

Brand New Satelite c55 b5353 wont boot Windows 8.1

hello guys, im a little bit in shambles at the moment due to this problem i have, yesterday im on facebook, browzing my page and put the laptop to sleep mode to move to another room and when i turned it back on it froze on me, i waited for an hour before i had to force press the power button. now it doesn't even boot windows 8 anymore, and just tells me to Reboot and select proper boot device or insert boot media in selected boot device and press a key.

Try going through the suggestions in this article. If you can't perform one, skip to the next:
What can I do if my Windows 8 laptop won't start?
- Peter

Satellite C50-A634 wont boot from USB or DVD

My new toshiba Satellite C50-A634 wont boot from usb, or dvd ,
i have downloaded win 8.1 and burn image to dvd but i still get an error message "no bootable device......please restart system" .
Can some one plz help?

Hi
Does Satellite C50-A634 supports internal CD/DVD drive or did you try to boot from external optical disk drive?
You have to know that _Satellite C50 & Satellite C50D models *without* a built-in ODD_ are not able to boot from an external ODD due to a technical limitation.
Details here:
[Limitation of external boot media for Satellite, Satellite Pro C50 & C50D devices|http://aps2.toshiba-tro.de/kb0/TSB3B03JA0000R01.htm]
Only USB flash drives are supported as external boot devices!
It is necessary you can use a USB flash drive as recovery media on notebooks without a built-in ODD.

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Toshiba A105 wont boot, blinking lights.

My friends toshiba A105 wont boot, it has no display, fans dont even spin up, power button does nothing. All it does is the battery and AC lights blink green every couple seconds when it's plugged into AC. tried it with the battery out too. Any idea whats wrong, is this some kind of error code? I can take it apart if I have to. I did once before because the fan stopped working and had to be replaced.

Possibly an error code. Do they blink any particular pattern? (usually four sets, ie 2-1-3-1 where each number is the number of blinks between the long pause).
WIth out knowing much more I am going to hazard a guess and say maybe power system error. The first thing I would check is the voltage coming out of your power adapter.

Toshiba Satelite L655D-S5109 stuck in infinite boot loops

Not much happened but heres the video https://m.youtube.com/watch?v=dBWG-_8xnHU

Windows 7 wont boot
see here for What can I do if my Windows 7 or Windows Vista laptop won't start? - http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista...
Test the memory and memory slots - remove the memory sticks and then install only one of them and try to start, try one at a time and in each different slot to check for dirty loose connection, bad or failing memory, or bad memory slot.
If you created a Windows 7 repair disc you can try to use it, set the bios to boot from CD/DVD first to see it will boot from the drive.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

A78M-E45 blank screen, wont boot, no post boot.

Hi there,
I always had ASUS boards with Intel processors. Now Im building a MSI / AMD computer.
Motherboard: A78M-E45
Memory: Kingston blu 16gb 1600mhz KHX1600C10D3B1K2/16G (two sticks of 8gb)
Processor: AMD Athlon II X4 760K
Power: Corsair CX430 V2
Graphics: Club3D Radeon R9 270 14 series
SSD: Crucial M500 240gb sata3
Case: CoolerMaster N300
With this configuration the system wont boot. Just a blank screen.
I did a few tricks like changing the Power to a better one. Unplugged the SSD and DVD drive. Cleared the cmos.
No luck.
The processor is compatible but the memory is not on the list. The board should handle speeds up to 2133mhz so that sould be no problem.
What am I missing here?
Thanks,
Sebastiaan.

I have a few questions for you:
what other power supply did you try? (it may be a power problem as a AMD system with that config may need upto a 500-550W PSU with the CPU and Graphics combo you have)
have you tried each stick of RAM individually on the board? (Some kits are defective and you need to test each)
can you try the board outside the case on a non conductive surface (cardboard or untreated wood) to make sure its not a short under the board?

Satelite C855D-S5320 boot to troubleshooting menu and after pressing restore it wont boot

i have a problem like this before, but it says cant run auto repair and i select advanced options and choose restore point and it works, but today its the third time my laptop wont boot, it wont go to troubleshoot menu, it direct to restore or cancel options for the first and the second time i choose cancel and the laptop restart and boot normally to troubleshooting menu and i choose restore point again and it works, but the third time in the same day it wont go to auto repair menu like troubleshooting, boot from cd/flashdisk wont come out, it says
"Automatic repair
windows couldn't load correctly
Sytem restore can try to restore your pc (and bla bla bla)"
and i can only have 2choices, choose restore or cancel
in boot i've i tried to press F2 or F12 and it goes blank
for the first and second time i choose cancel and it reboot and entering troubleshooting menu, but the third time i choose restore or cancel again and again but it go to tohiba boot, and stuck there, it wont boot

Satellite C855D-S5320
boot from cd/flashdisk wont come out
What CD or flash drive? The one created by Windows 8?
-Jerry

Kernel-2.6.31.6-1 on Toshiba satelite

For owners of Toshiba satelite: kernel-2.6.31.6-1 does not work on Toshiba satelite A105 S2141. Bad things begin right at booting time after frase Loading ACPI modules.
Last edited by m.bork (2009-12-30 08:23:30)

I have the same problem with my Toshiba Satellite L505D with the latest install release. I get 'a lot' of acpi errors. The only way to get a successful boot is acpi=off or acpi=ht, so luckily it can see both cores. I thought it was because of a buggy DSDT table, but I can't actually boot the computer and copy the DSDT table to recompile it and try to fix the issues; it only loads the DSDT table if acpi is enabled, and I can't boot if acpi is enabled.
I'm basically stuck using Windows 7, which has actually been a really nice OS, since I can't have any sort of power management in Arch. Not being able to have power management means not being able to use Arch, what good is a laptop if the battery wont last.
Last edited by Sjoden (2009-12-28 22:46:52)

M30x bios does not detect hard drive, wont boot from HD

Can someone help me in this issue.
My Sat m30x wont boot from Hard Drive, instead tries to boot from network.
Tried to load setup defaults and Hd wont show on the settings
tried to reistal origin CD software by toshiba and the message no target drive displays
Can this be a hardware problem, some damaged fisical conection, or is it a bios problem
thanks in advance for some ligth on this problem

My M30x has the same problem. I just have used it for 2 months.
I sent it to the repair center as I was told to do, because it has warranty.
I'm still waiting for a response from them. I don't know what caused it.

Satellite P100-240 wont boot up after failed BIOS update

Hi, let me just start by saying im an idiot....
Dowloaded a few drivers for my toshiba p100 240 and noticed there was a BIOS update, i downloaded it and ran the program only for it to come up with
an error that it will only allow the Administrator to run program. My laptop became slow and would not allow me to turn it off by any means. In the end i took out the
battery and restarted only to find a blank screen, no start up or anything on screen.
I fear i have totally killed my machine and its about 4 months out of warrenty, Im sure there is no cheap miricle cure for this but if anyone can give me my options here I would really appreciate it.
Thanks for your time,
Martin.

Hi mate,
Thats a bit of a problem... If your machine really wont boot up and no screen comes up, then your BIOS was probably damaged.
I would really recommend you to contact an [authorized service partner|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and tell them your problem. Maybe they can do something for. I mean, your machines hardware is ok, and its just some BIOS related thing.
Hope your machine will work again..
Greets

Toshiba Satelite A305-S6858 Reboots and could not load Vista Normally but can run Safemode only

Please help me... I love this Toshiba Satelite A305-S6858 and I keep getting this problem. I already tried to disable legacy support and the memory test says 4GB is working fine. Please help me.

Satellite A305-S6858
Let's start here.
Boot into Safe Mode and open System Properties (sysdm.cpl). On the Advanced tab, click the Settings button at the bottom (under Startup and Recovery).
What is the state of the Automatically restart check box? If it's checked, clear it.
What is the state of the two fields at the bottom? Set things for a mini-dump as shown below.
Does that give you a blue screen when you boot normally?
-Jerry

NB500-110 Wont boot up. Recovery manager doesnt get further than keyboard

Hi,
My laptop wont boot up. When I launch the windows repair it allows me to select the language and keyboard but I never get the option to enter the user name and password. I then get the message
"You must log in to access. System Recovery Options. If you are having trouble logging on contact your computer administrator for assistance. Click OK to restart the computer"

Hi
If I understand you right you can see step 2 only, right?
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
Can you click on NEXT button?

Equium L40-14L - Wont boot up

My laptop crashed and now wont boot up just comes up with disc read error.
I have tried the recovery disc but this goes as far as choosing the language then seems to crash again any thoughts as to what the problem is?

Hi buddy,
You wrote that your notebook crashed but what happened exactly? Did you get a BSOD or did it shut down immediately?
At the moment I assume your HDD is maybe faulty because you got a disk read error and you can install Windows from the Toshiba recovery disk.
Have you checked the HDD with a diagnostic tool like Drive Fitness Test?

Equium L350 wont boot, just beeps

Hi Everyone,
I have an Equium l350 laptop model psld2e-003003ks.
It wont boot up it just beeps continually there doesnt seem to be any specific sequence of beeps just continual.
I have tried F8 and started it in safe mode which it does, but when click on "start" it displays "search" and the letter G scrolls along the search box.
I cant do an antivirus scan as it asks for my administrator password which I cant put in as again a series of letters or numbers just scrolls along the box where you input your password.
2 evenings previous I was using my laptop in bed and I got a blue error screen but managed to reboot it ok.
The next night it was fine too. I'm unsure as to whether I have a virus problem or a hardware prob.

Hello
> but when click on "start" it displays "search" and the letter G scrolls along the search box.
This would mean the key G on keyboard stocks and so a continuous beep appears. Maybe you can solve the problem if you try to repair the key: Just move the key a little bit but be careful.
Generally speaking if you exchange the keyboard your problem should be solved and a new keyboard can be ordered from an authorized service provider in your country. On Toshiba website you can find a list with all ASPs.

Toshiba satelite E45-B4200 wont boot up

Similar Messages

Maybe you are looking for