Toshiba Satellite A300-20T shuts down after 5 seconds!!

my laptop satellite A300-20T shuts down after 5 seconds of booting , i dont know why ?? and i searched for support in the website and didn't find it in the model list, also i don't know why ???!!
i want to know why it shuts down , and how can i communicate with support

Yours would not appear to be a US model. We need the Part Number for your laptop, like PSAG8U-05K02C. You can find this on the Toshiba label on the bottom of your laptop. As well, what country was it originally purchased in. In addition, what is your operating system version, like Windows Vista 32bit?
Mike

Similar Messages

  • Satellite Pro U200 shuts down after 5 mins then starts after a while

    Satellite Pro U200 shuts down after 5 mins then starts after a while. When it shuts down the
    blue screen says - stop: (0x0000008e,0xaa846f58,0xa9f29808,0x00000000)
    sysaudio.sys - adress aa846f58 base at aa843000, datestamp 41107f1a

    Hi
    Believe me; its not easy to say exactly why the BSOD appears.
    Generally it happens because of the serious software malfunction or hardware fault.
    Did you use the OS from the Toshiba image?
    There message says something about sysaudio.sys.
    This file is a system audio WDM filter process and its a part of Windows OS. It controls the hardware like printer or graphic card on a lower level.
    Note: The virus uses such files as a camouflage. You should use always a anti virus application.
    Furthermore you have suggested that the notebook shuts down after 5 min.
    Well, this sounds like a overheating issue. How did you use the notebook? You should know that the free space around the notebook is very important because of the air circulation. The ventilators should be also free.
    I you use the notebook in the right position and this will happen again so I would recommend asking the Toshiba service partner for the help. They should check the notebook.

  • Podcast application shuts down after seconds of use on 5th gen ptouch. On/off attmpt does not fix. Ideas?

    Podcast application shuts down after seconds of use on 5th gen ptouch. On/off attmpt does not fix. Ideas?

    See:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up

  • Satellite A30-921 shuts down after 10 mins

    I own a Satellite A30-921 but it shuts down after 10 mins.
    I've tried to alter the toshiba power management settings but they wont work any ideas ?

    Does the notebook shut down automatically without showing any error messages?
    This could be caused by an overheating issue!
    How old is your notebook and did you clean the cooling ventilators in the past?
    If not I would recommend doing this.
    To clean the ventilators you could use the compressed air spray which can be purchased in most computer stores.
    The problem is that the dust and debris inside the notebook prevents the cooling modules from properly working and therefore the temperature increases to the higher level. This leads to the automatically shuts downs.
    In my opinion the fans cleaning could helps to solve this issue.
    Bye

  • Satellite P10-554 shuts down after few minutes and I can not reboot

    hello,
    i hope anybody can help me with my satellite P10-554
    when i start the notebook everything works fine a few minutes. than the monitor turns into black and the notebooks shuts down suddenly. i cannot reboot it, when i push the start-button nothing happens.
    i have to wait for about an hour and then i can start it up again, but he works just a minute and shuts down again !
    help me please, cause i need my notebook to work !

    I did that many times. First you need a special torx-screwdriver. Then you can remove the cover over the fans. Than take your vacuum-cleaner and remove the dust. Take a brush or somethin else to remove the dust from the fans. Then, you need to remove I think 2 big screws, now you should hold the cooling falance in your hands, the one with the fans. Clean that properly.
    After that you can remove the copper-cooler, with 2 more screws I think, but it is pretty obviously. Now you should see the blank cpu with lots of heat-paste on it. I dont know why they put so much of this stuff on it from toshiba. So get a better one like Arctic-Silver or sth. My advice is to take the CPU off (one screw on top as far as I remember) and clean the surface.
    The copper you can clean under water, but dont use sth that could scratch the surface. After that let it dry good. Now just put the CPU back and fix it with the screw again. Take a !litte! heat paste and put it properly with a paper all over the surface of the CPU, but remember, just a little! Then follow all steps back, dont forget to clean the graphics-chip as well and put some paste on it. You can see which it is when you look under the fan-cooling-falance, there should be a rest of heat-paste. Everything back to its place and voil*, a nice, cool clean notebook. By the way, I replaced even the fans.
    If you need further advice, just ask!

  • Re: Satellite A300-1J1 shuts down without giving me warning

    Guys please help me.
    My A300-1j1 Toshiba satellite automatically stops or shut down completely without giving me the warnings.
    I dont know whether its hardware or software problem.
    My pc was infected few days ago with Trojan backdoors and web32.agent but as I have fully licensed kaspersky internet security i succeeded to heal them and now they are not prevalent in my laptops.
    But still now and then my pc get turn off. What should i do.
    Will i set up my vista home premium again using factory image.
    I really dont want to set vista again.
    Please guys help me.
    is there any other way to fix this problem.
    pls pls help me and let me know with your kind mail.
    my amiling id is: [email protected]
    pls help me.

    Hi
    Yes, this sounds like an overheating issue.
    If the internal temperature arises to a critical level then an internal sensor would shutdown the notebook to prevent the hardware from damage.
    Please follow the advices and recommendations posted by blakcPox to avoid such overheating!
    At the other hand this can be a software issue maybe the problem is related to the early virus infection
    Therefore a new OS installation might be helpful too

  • Satellite Pro 6100 shuts down after 15-30 minutes

    My satellite Pro 6100 cuts out after 15-30 mins operating on mains power. There is a snapping sound and all lights go out except slow flashing amber (power problem). I restore it by removing the power cable and waiting a while.
    It will then boot up again. I have used two different power adaptors and two different battery packs. It also happens if running on mains with no battery in. My suspicion is an overheat cut-out. Does the Sat Pro have one? Might it be clogged with dust inside (it is 5 years old)? If so how do I clean it out. I don't think it is fan failure as I can hear the fan cut in. Advice much appreciated. Thank you.

    Hi there,
    Me and my partner, have the same LapTop, and I've located the problem in connector between PSU board and MainBoard. So, if you've never opened your LapTop, now is the time, but be prepared with tools for SMD soldering. Usually, the connector on MainBoard is the problem. The reason for this is that Toshiba made flaw in design of the housing and admitted that, which resulted with court order for replacing the LapTop with some models from newer line for that time, or paying cash amount ($1.000). I intend to repair my LapTop in a way that I will replace the connectors (both on PSU and Main Board) with thin wires. I know that this is a hell of a job (160 solder points) but what can I do, I love this machine. I am working on Compaq EVO N-610c, but he can only eat the dust from Toshiba.
    Regards,
    Alek
    P.S. If you want to consult me about that matter, feel free to contact me on my e-Mail: [email protected]

  • Satellite P200-144 shuts down after wake up from hibernation mode

    Sometimes when I resume my computer from hibernation, I come back to it (after going to make a cup of tea whilst it boots up, for instance) to find it off again.
    I have since observed it more closely and discovered the following: if I resume from hibernation and do not touch the mouse or keyboard, the computer will load up Windows but then hibernate itself again immediately.
    If I move the mouse pointer at some point whilst Windows is finishing loading the desktop, etc., then the computer doesn't automatically hibernate.
    Has anyone else had this problem and is there a solution?

    Thanks for your reply. I am, and always have been, running the latest BIOS. I have never experienced the issue with standby, but that is probably because of the way I use my computer -- with standby, I start using it immediately. I have not tested resuming from standby and not pressing any buttons or moving the mouse.
    Have you tested it as I described, by not moving the mouse or pressing any keys when resuming from hibernation, or are you just recalling from memory that you have not experienced it?

  • Re: Satellite A105 shuts down after 60 seconds (NOT a thermal problem)

    Satellite A105-s4344 shuts down after EXACTLY 60 seconds. The mobo has been removed from bezels and all un-needed devices removed (DVD, HDD, WiFI etc.). Swapped CPU and RAM with known good ones. Swapped AC adapter and battery with known good. Does the same on AC or DC only inputs.
    I have not yet flashed the BIOS (with 60 seconds this would be foolish). But, I am looking into replacing or reflashing with an EEPROM burner. Currently has V 2.0
    I am not sure what genration heat detecting this system uses, but it is a possible cause if it is one of the later generations (visit http://www.topbits.com/how-to-monitor-cpu-temperature.html if you do not know that I am refering to).
    Prior to reballing the north and south bridge, and flashing I figured I would get some input from you folks. Just to cover all bases ;)
    P.S. the first person to ask what OS I am using will get an instant ticket to the bottom of my respect list.

    >P.S. the first person to ask what OS I am using will get an instant ticket to the bottom of my respect list.
    :) :) :) Best thing I saw in this forum.
    Back to your problem.
    I am not technician but here just my opinion about all this. The fact is that after switching your notebook ON CPU in just few seconds reaches very high temperature. You can switch your notebook ON and just enter BIOS settings and the same should happen again.
    I cannot say for sure if this is 100% thermal issue or not but what else can be responsible for switching off? CPU will be hot in few seconds only. Material change structure with temperature change and I can just imagine some contact will be interrupted.
    On this forum we had many similar reports like when cold notebook starts and runs well but after short time switches off for no reason. Maybe I am wrong but for me it sounds like thermal or bad contacts issue. Lets see what other people have to say about it.

  • MacBook Retina shuts down after a few seconds after every boot

    Hi there
    My retina macbook keeps shutting down after booting and rebooting by its own a minute later. No error message is displayed or anything like it, it just magically shuts down.
    It had been working fine until now but it seems to be going crazy for whatever reason...
    When it shuts down by itself, I can't turn it on myself. It does it on its own even if the lid is closed and then shuts down again after about 30 seconds.
    This only happens when it's connected to a power source (it doesn't even start when it's not).
    I have tried to reset the PRAM without success.
    The only time the issue doesn't happen is when I do a Safe Boot.
    Can anybody tell me what is up with my Macbook (I really need it for work AND school).
    Thanks

    Have you done a SMC reset?
    http://support.apple.com/en-us/HT201295
    Run an Apple Hardware Test:
    http://support.apple.com/en-us/HT201257
    Download and post an EtreCheck report:
    http://www.etresoft.com/etrecheck
    Ciao.

  • Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

    PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
    I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
    I also installed premiere elements version 12 with the same problem.
    What can be the problem here, please help?
    Thanks.
    Wim.

    Hi roberto-
    Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
    -sag

  • Published Captivate .swf shuts down after split second

    Windows Vista 64 bit
    Captivate 5
    Does not matter whether I publish to Flash Player 10 or 9
    No text animations
    When I publish a particular file to .swf and try to open, the movie shuts down after a split second.
    I have 40 other published .swf files that were created the same way.
    Even tried copying the slides into a working Captivate and republish and still have the same problem.
    Currently I have a deadline and this is now in crisis mode.
    Please help!
    Thanks,
    Chuck

    Update to previous post....
    Reinstalled Captivate 5.
    Applied the latest Captivate patch.
    Totally solved the problem.
    I want to thank Captiv8r who was more than willing to assist.

  • AFTER UPDATE GREY SCREEN NO SOUND THEN SHUTS DOWN AFTER 30  SECONDS PLEASE HELP

    AFTER UPDATE GREY SCREEN APPEARS WHEN POWER BUTTON PRESSED NO START UP SOUND THEN SHUTS DOWN AFTER 30  SECONDS AND REPEATS ITS SELF PLEASE HELP

    As for now, only thing that helped was an archive and install with preserve user settings. Seems after the reinstall of 10.4. everything that was weird has become normal again. I hope very much this state stays on for a while - or ever!
    A comment to everybody: with problems that are common you get a lot of help from friendly users in here, but if like in my situation things get a bit more uncommon than the usual querks and troubles your bound to go through a whole workflow of tests and algorithms - i did learn some new things but eventually I had to go for the ultimate - the reinstall (of course, erase and install would have been more work.) and it's frustrating not to find out how it came to this problem. I wish I could nail it down to something I did mistakenly - i guess I'll find out next time.
    THANKS THOUGH to those who replied.
    Keywan

  • On starting up, my macbook pro shuts down after 25 seconds of booting up.

    Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • HD Video Cam Model #: VF0580 Shuts down after 3 seconds of recording

    My Vado HD Cam will automatically shut down after recording for 3 seconds. I have purchased and installed new battery and updated firm ware but it still happens.
    Any advice?

    Willizzz,
    Sorry, does the Vado HD Cam shuts down only when it's recording or does it turns off right after you turn it on?

Maybe you are looking for