Toshiba Satellite A505-S6033 Indicator Lights Not Working

I have a Toshiba Satellite A505-S6033 that all of a sudden does not have its ac power and batter power indicator lights working.  The power and hard drive activity lights do however work.  The laptop works fine on both AC and battery power as well as the battery recharges no problem.  I tried the cord and pack from my other Toshiba laptop and still no lights.  I also changed out the charge cable with a new one after this assuming a short in the cable.  Still no lights, however everything works.  Please help as I am at a loss why only these 2 indicator lights out of the whole strip do not illuminate as well as the laptop still works fine.  Thanks in advance for any help you can provide me.

leds burn out too.  you could replace or just use as-is.  they really aren't necessary anyway.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Similar Messages

  • 1 month Toshiba satellite A505 s6033 freezing randomly and blank screen on startup

    Hi,
    My Toshiba satellite A505 s6033 start freezing last night when I was surfing the internet. After pressing 5 seconds or more the power button the computer turned off.  After that I start it back on but all the lights on body worked except the display.
    After few more attempts I pushed arrow down and the power button the display turned on, but the freezing problem is back. So I thought that is a windows problem and I used the recovery partition to restore the state out of the box state. But the display is randomly blank when I push the start button except the other lights, and after restoring the laptop still freezing randomly in or during the windows is loading.
    When I turn it on in safe mode, it works perfectly fine. When I turn it on normally, it freezes almost right away.
    I bought this computer from bestbuy, but I am an Romanian citizen (sorry for my English), my question is : I can use the International Limited Warranty in my country ? Or what should I do to fix my laptop.
    Kind regard,
    Valentin

    First, sorry because of my English, it is not my language and it's been a while since I had to used it.
    This is happening to me, when I bought the laptop I had a few times that it froze but I thought it was something I did, and it happened once or twice in 3 months, for 9 months, maybe 4 times in the last month, it began to increase.
    Then I thought it could be the temperature, and after a while, 2 months, I didn't had time, I bought a external cooler, but it didn't work... By this time my warranty expired... And thinking it could be dirt, I opened the back, but just by removing it I saw it was clean and put it back, I did nothing but opening... And again started looking for what it could be... Yes, I tried looking here, but I didn't find this topic that time, and now that I don't have the warranty I found it...
    Any one here could help me? What should I do? Is there any way to fix it without buying a new video card? 
    I live in Brazil so its difficult for me to buy parts, I bought the laptop in the states when there, here the hardware are expensive... But if I have, I'll buy... If I have to buy a new one, could you tell me if there is a new one that I can buy that has little difference in price for the one I have and it's better?
    PS: Toshiba from Brazil didn't helped me, I just spoke with then...
    I thank you for any help!!

  • Sleep indicator light not working

    This isn't really that huge of an issue, but I've noticed that the sleep indicator light on my 366MHz Firewire iBook, which I recently bought on eBay and installed a few upgrades in, seems to not be flashing when the computer is asleep. At first I suspected a bad LED, so I swapped it out with a known-good indicator light from my previous 300MHz iBook. That hasn't seemed to work, and both display cables going into the motherboard appear to be securely attached. Oddly enough, I do recall one time when I put the computer to sleep and the indicator light worked (this was somewhere in the middle of my trying to get it to work), but I haven't been able to replicate it.

    Have you tried to reset the Power Management Unit (PMU)?
    http://support.apple.com/kb/HT1431?viewlocale=en_US

  • Status Indicator Light not working

    I've been having a recurring issue with the status indicator light on my 15.4-inch MacBook Pro 2.8 GHz (Mid-2009). I learned recently that it's normal for the status indicator light to be on when the computer starts up, shuts down and goes to sleep. Lately, the status indicator light has not appeared at all when the computer starts up, goes to sleep, and shuts down. I've tried almost everything and still nothing has worked
    1.) Checked to see if any of the ports are working: FireWire, Ethernet, MagSafe, SD card, USB, Mini-DisplayPort. These ports are behaving as normal, working fine.
    2.) Checked and successfully paired a seven button Apple Remote to test the IR receiver.
    3.) Ran an Apple Hardware Test, found nothing wrong, passed the test.
    4.) Reinstalled and erased my hard drive, still having issues.
    5.) Bluetooth, AirPort Extreme, microphone, audio ports, speakers, and iSight are working.
    6.) Battery works and the charger is working.
    7.) Backlighting for display and keyboard work.
    The computer is only 1 year and 4 months old. The issue began occurring two months ago. Now the computer does sleep, but if the fans are going, it takes a bit longer for the computer to go to sleep when I close the lid.
    I haven't replaced the hard drive or installed any new hardware.
    The battery and power information is still at 100%:
    Model Information:
    Serial Number: W0945***7VC
    Manufacturer: SMP
    Device name: bq20z451
    Pack Lot Code: 0000
    PCB Lot Code: 0000
    Firmware Version: 0003
    Hardware Revision: 0003
    Cell Revision: 0100
    Charge Information:
    Charge remaining (mAh): 4165
    Fully charged:No
    Charging: Yes
    Full charge capacity (mAh): 6662
    Health Information:
    Cycle count: 43
    Condition: Normal
    Battery Installed: Yes
    Amperage (mA): 3177
    Voltage (mV): 12109
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 15
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 15
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: No
    Current Power Source: Yes
    Display Sleep Uses Dim: Yes
    GPUSwitch: 2
    Battery Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 2
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    GPUSwitch: 2
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    ID: 0x0100
    Wattage (W): 85
    Revision: 0x0000
    Family: 0x00ba
    Serial Number: 0x009fe8db
    Charging: Yes
    My computer's warranty with Apple, including tech support, service, and repair, has expired. However, I do have a remaining two year warranty with Best Buy Geek Squad.
    I'm wondering how much would it cost out of pocket to take this computer to an Apple Store for service and repair with a Mac Genius?
    So is there anything that could be wrong with this computer and if so, please help!
    <Serial Number Edited by Host>

    studabaker wrote:
    I erased the disk with Disk Utility using the installation DVD ....
    If you used "Secure erase", you can be certain that there is nothing left on the disk that is causing your problem.
    Because you have a long wait for access to an Apple Authorized Service Provider, if you merely clicked "erase" (the one that does not take more than an hour), you could try Secure Erase now if you want to try the final possible fix you can do on your own.
    ... and installed the combo update recently, the size for that update was over 1GB.
    That is the right one.
    I have been regularly doing those permissions. Thanks for the suggestions.
    You're welcome.
    I'm taking my Mac to Geek Squad and Mac Genius next month when I visit my dad in Georgia, there's an Apple Store about 45 minutes away from his house and a Best Buy that sells Macs, cause it turns out Geek Squad's coverage for Apple/Mac is only in places where they sell Macs. I used my zip code and turned up 0 results but I typed the zip code for where my dad lives in North Georgia, and a Best Buy in Atlanta is available. So I will definitely go there and visit the Apple Store to at least see what my options are.
    If you need help from Apple before you can go to a physical location next month, other Apple Technical Support service option contacts are available here:
      http://www.apple.com/contact/
    Best Buy by far has the best warranty for computers from what the sales associate was telling me. Apparently, Best Buy warranty covers spills, drops & breaks, and overall maintenance issues. In fact, they told me if the computer can't be fixed, they'll replace it with a new one.
    It should surprise nobody when salesmen tell customers that their own warranty product is best. Because you have apparently already paid for the Best Buy warranty, you can take advantage of their warranty and enjoy the "best" results if you can find a location that honors it.
    Thanks for advice and if there's anything else you can think of, let me know.
    You're welcome. You have all my suggestions. However, if I think of anything else, I will post back here.
    We will watch for your status update. Please let us know what fix works for you.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.7); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.7)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.3.1

  • Toshiba Satellite S70-B - Keyboard backlight not working?

    Hello, I purchased a brand new Toshiba Satellite S70-B laptop with Windows 8 on it. When I received it, I removed the harddrive and installed a SSD with Windows 7 on it. After getting help from Toshiba support, all the drivers and harware seem to work except the backlight keyboard? I spoken to several Toshiba support techs and finally came to the conclusion to send it in to change out the keyboard. Yet I fear if I send it in, they will remove my SSD and reinstall a hardrive with Windows 8 as their solution. Does anyone have other suggestions... ?? Any help is appreciated.

    I am having problems with my keyboard backlight too. I spilled water on mine and had to totally take it apart, until then  I never had any problem with the shortcut key turning it on and off. I found this last night. Unfortunately. it didn't work for me Also became disappointed when I searched and searched for that magic timer on my desktop he spoke of. Let me know. 1) Shut down laptop
    2) Turn on and start tapping the F2 button until you get to the BIOS screen
    3) Scroll over to power management and change the setting for your backlit keyboard from off to on.
    4) Press F10 to save and continue to start up.
    5) Enjoy.
    Believe it or not, I JUST fixed this issue on my own a665D laptop. I am still tweaking it though because after this, the shortcut keys don't allow you to turn the backlight off so I'm typing on a keyboard who's LED's wont go off as of yet. But this should help for now.--REVISION: I am done "tweaking it" as I have found the answer and it was glaring me in the face. Instead of just turning it to the ON position through BIOS, turn it to TIMER. You can set the amount of time you want it to stay on when ever you press a key and the FN+Z shortcut works when this is set up so you can turn the keyboard on, off, or to follow the timer right from your desktop. I hope this helped.
    Asker's rating & comment
    5 out of 5
    You are officially awesome. Worked perfectly; I never would have ventured into the BIOS without an exact guide like you gave (Would have blown up the laptop or something lol). But anyway, thanks so much,

  • Toshiba satellite a215-s4757 internal mic not working

    So up until a couple weeks ago, my internal mike on my computer was working fine. Then the other day when I tried to use skype it would not work. When I go into sound->recording devices it says that the "front mic" is not plugged in. When I click on it thought it says it is working properly. I tried to download and install the driver from toshiba and it said that it installed correctly but this did not fix my problem. I read here that some other people have been downloading a new BIOS and that that helped? would that be able to help my computer? i have windows vista home premium 32 bit i believe. any help would be appreciated

    Satellite A215-S4757 Specifications
    Satellite A215-S4757 Downloads
    Let's just try a proper system reset and see if this helps bring your mic back.  Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, boot into Windows, and test your mic again.
    Please let us know if this helps. Good luck.
    Mike

  • T430s - Disk-activity and wireless indicator lights not working

    Just noticed that the indicator lights on the T430s are not working. There is a wireless and a disk activity light that are not lit up or blinks during activity. Located just left of the T430s sign on the lower half of the laptop cover.

    Hello:
    That is a new one on me! 
    Try trashing a couple of preference files and then restarting:
    com.apple.dock.plist
    com.apple.dock.db
    Barry

  • Blue indicator lights not working properly

    Hi
    I've just doen the SMC updated to enable Power Nap on my 13" Macbook Air running ML. It seemed to work OK except that the blue indicator lights in the dock aren't working properly. Instead of showing blue lights it now shows little white rectangles. Seems to function the same, it's more of a graphical glitch it seems - but an annoying one. Any ideas please? I am a complete Mac noob I'm afraid.. first ever Mac...
    Thanks.

    Try doing a Dock restart using the following Terminal command:
    killall Dock
    Log out/in and test. If that doesn't work.
    You need to look in your user Library/Applications Support/Dock for the .db. Hold down the option key while using the Finder “Go To Folder” command. Enter ~/ Library/Applications Support/Dock.  Move the .db to your desktop.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.
    Then try a dock reset.
    Applications/Utilities/Terminal enter the command
    killall Dock
    Log out/in test. If it works okay, delete the .db from the desktop.
    If the Dock is the same, return the .db to where you got them from, overwriting the newer ones.

  • Toshiba Satellite C850-F12S Function Keys not working

    I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

    Hi Eldorado
    Thanks for your suggestion. Have done as you said but still have the problem.
    I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
    I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
    Cheers
    David

  • Battery Indicator Lights Not Working

    When I push the button on the side of my macbook pro, the 8 little lights do not light up. Is there a way I may have accidentally turned then off? Is there anything I can do to make them work? Thanks for the help.

    If you have Applecare warranty take it in for a check. If faulty it will be repaired at no cost.
    Neville

  • Sleep indicator light not working after upgrading to Snow Leopard

    Hello all, I recently upgraded to Snow Leopard on my mid-2007 Macbook Pro (Macbook Pro 3,1, 2.4Ghz Core 2 Duo, 4GB RAM) and after the upgrade the sleep light no longer comes on when I shut the lid or when the display is powered off.
    Not a huge deal, but might be an issue if I can't remember if I shut the computer down or put it to sleep last—I did not do a clean install, but would anyone happen to know something I could try before resorting to that?
    Thanks, your help is much appreciated!

    Have you tried Resetting the System Management Controller (SMC)?
    cornelius

  • Toshiba satellite L300D-01, system recovery not working.

    Yesterday I was just on my laptop then it just suddenly turned off, with a blue screen (that didnt stay on long enough for me to read) when i tried turning it back on it would go as far as the green bar loading, then a black screen, I tried waiting for a bit sometimes load up is slow you know, but nothing happened, tried same thing over and over again, still the same outcome. so then I tried the system recovery to the out of box state, it finished but the drivers did not install.
    and what happened was when I did that it said it was finished made my account name and stuff then the blue screen popped up again then shut off and restarted, then when I tried restaring again the same thing would happen over and over again. I tried one last time on the system recovery and my laptop would not stay on long enough to finish. so I dont know what to do, or whats going on or if theres even a wzy to fix this. if someone could give me any information please thank you..
    also, Im kind of broke so cant afford to buy new expensive parts for it, and I live in a very small town thousands of miles away from a repair shop.

    hello?? anyone. im tired of searching through everything online can anyone hgive me an answer please.

  • Toshiba Satellite A505 crash/ file recovery

    I have a Toshiba Satellite A505 that suddenly crashed. Worked fine when I shut it down the other night. Wouldn't boot up the next morning.  I've tried using the recovery CD. with no luck. Tried the AVG recovery Cd with no luck. It won't run in safe mode. Will load drivers up to avgidseh.sys and then stops.  I've removed the hard drive, It does seem to be spinning ok. Hooked it up to another computer where it gets recognised but it won't open or anything. In fact when I try it stalls out the other computer. I've tried UndeletePlus but that also just locks up.   Any ideas anyone? I'm a photographer and was bad and didn't get some of my latest photos backed up. I'm not too worried about getting the computer back up and running but I'd really like to be able to get at my files off the hard drive if possible.  Thanks.

    Do you need any further help, Dave?
    Two thoughts..
    system volume on disk is corrupt.
    You may be able to resurrect the drive by running this at the command prompt in WinRE.
       chkdsk c: /r
    I am being told that I don't have permission to do that. 
    You've apparently solved this somehow.
    The usual remedy is to take ownership of the files/folders. See KB823306.
    -Jerry

  • Satellite L300 (PSLB8C-0H901X) does not work

    My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no POST, nothing, Get power and charge lamp when pluged in nothing else, any known issues? Any fixes, Thanks in advance for your help.

    Hmm sounds like a serious hardware issue.
    If you are a lucky man the issue could be related to RAM module.
    The RAM modules can be replaced easily. The memory bay is placed at the bottom of the unit secured by one screw.
    But the question is if its really related to RAM.
    Well, you will know this if you would replace/check this
    Otherwise I recommend asking an professional notebook technician for a help

  • Satellite A505-S6033 wont awake from sleep

    My new A505-S6033 PSAT9U-006002 will not come back from sleep. I am using an external LCD with output soley to it. I have to use the power button to shut down and restart using "Start Windows Normally". Any help would be great. Actually now that I think about it, I am not certain if its asleep or just the 'turn off the display' in 5 mins is causing it. Either way, I tried unplugging the LCD and still nothing on the laptop display.
    Satellite A505-S6033 [PSAT9U-006002] Intel® Core™ i7-720QM
    6MB L3 cache / 1.6GHz - 2.8GHz / 64-bit Windows 7 Home Premium [BIOS 1.30, 04/14/2010]
    Solved!
    Go to Solution.

    Jerry, not sure what I should change with the power options as I like them as-is for Balanced mode. I did confirm the external LCD [HP w19b] turns off by default in 10 mins and does come back on when I move the mouse a minute later then after 15 mins, [default sleep] time - the laptop does not go to sleep but appears to lock up or freeze, forcing me to hold the power button down to restart to get the display back. The drive indicator light stops and stays off and the cooling fan continues to run but not at a steady rate. Also the AC power light and ON/OFF light stay lit. 
    Also, disconnecting the external LCD allows the laptop to sleep as normal in 15 mins. and when i move the mouse it starts to wake, meaning the ON/OFF light goes from slow blinking red back to solid white but no drive activity and no display. I am running WHS connector FYI, Dropbox and Google Calendar Sync.
    Reliability Reports in 7 shows the laptop did not shut down correctly when i did a forced shut down but no information is provided there. I'll have to poke around in Event Viewer. Let me know if there is a certain area I should look at.
    UPDATE: I didnt think to mention what I had plugged in the 3 USB ports but removing the External Western Digital storage drive WD3200AAJ fixed the sleep/wake problem but creates the problem of needing the external drive.
    After countless reboots and persistent configuration attempts I've found that moving the external hard drive to another USB port on the right side as opposed to the left side USB port fixed the problem temporarily but came right back. 
    Also I tried setting the USB sleep/wake/charge options 1) typical 2) alternative on the left USB, no luck.
    Satellite A505-S6033 [PSAT9U-006002] Intel® Core™ i7-720QM
    6MB L3 cache / 1.6GHz - 2.8GHz / 64-bit Windows 7 Home Premium [BIOS 1.30, 04/14/2010]

Maybe you are looking for

  • IPhoto Library from 7.1.5 not converted correctly to 9.5, now shows up empty

    Hello all, My mother recently aquired a new MacBook Pro; the data from her old laptop was transferred by the company it was bought at. (not a fan of that, but I wasn't around to do that as I live quite far away) The previous laptop was running Lion a

  • Custom tag losing onchange value when page is refreshed

    Hi all, I'm still using JSF 1.1 and I have an issue with a custom tag. When my page is first displayed, the onchange attribute contains my script but, when I refresh the page it's not there anymore. The custom tag if an input for dates. It can have o

  • JBO-26000: a generic exception error message

    Hi, I followed every step of the single table DBServlet tutorial, and the recommended deployment procedure as per the guide. I'm getting the following error when I run the DBServlet1 from Java Web Server 2.0 "JBO-26000: a generic exception occured du

  • Anyone else having trouble with shipping?

    My order was supposed to ship on the 24th. Every time i check its status online it says it is processing. Everytime i call no one gives me any help or will even tell me if it has shipped or if it is shipping to the correct address. Verizon wireless n

  • My Blackberry wont switch on!

    Hello! My Blackberry Curve 8520 wont switch on! Today when I woke up I tried to switch it on but it wont only the red light will flash.I broke my charger so I charge it through USB cable. Anyway I left it to charge and when i returned nothing had hap