Toshiba Satellite L3** CD/DVD issue !!! Here is my solution. How about you?

Hello everyone. Nowadays, I see on this forum people are discussing about the CD/DVD issues on L30/L300/L350. I would like to share my experience on this issue and hope everyone shares your experience as well.
My laptop are Toshiba L30 PSL33 and Toshiba L300 PSLB2E. I am lucky that I have no problem with CD/DVD discs/drives as I can read/write/play CD/DVD smoothly. However, I used to have some problems with CD/DVD drive on my notebook. Here is my experience.
1) Make sure there is no other CD/DVD softwares on your computer (except the orginal software from Toshiba). Especially to those who have been used to using Nero. If you have problems, try to remove Nero and test with the one supported by Windows
2) If you still have problems, try to update the firmware of the DVD drive. It can be done by visiting the Toshiba Support Driver site (http://eu.computers.toshiba-europe.com/). Check what drive you have by looking at the Device Manager. Download the newest firmware from there and update your drive.
3) My last solution. If you have Vista pre-installed, try to get a XP version on your computer and do not install any other software. Test/copy a CD by using windows writing tool to see whether the problem is solved or not.
In my opinion. the main reasons you may encournter are: there are CD/DVD drives have XP firmware base and need to be updated so that they can be used in Vista; or there are software like Nero and PowerDVD are causing the conflict between the ACPI controllers (real and simulated).
Hope this may help you all. If you have other experiences, please share with everyone.
PS: Please excuse my language as I am not an English speaker.
Edited by: Admin

Hi anhchuong!
Thanks for this nice solution instructions. In future, this ways,s mentioned by you, should be checked first.
I really like this one!
Rock on dude! ;)

Similar Messages

  • Toshiba Satellite P205-S7469 DVD Rom Replacement

    Does anyone know how to replace the DVD Burner in a Toshiba Satellite P205-S769?  I am assuming that I need to remove the keyboard in order to get to the drive.  Is this similar to other Satellite models where I could simply remove the keyboard securing strip?

    swati_banerjee wrote:
    Does anyone know how to replace the DVD Burner in a Toshiba Satellite P205-S769?  I am assuming that I need to remove the keyboard in order to get to the drive.  Is this similar to other Satellite models where I could simply remove the keyboard securing strip?
    You assume incorrectly.
    Unofficial instructions are here:
    http://www.irisvista.com/tech/laptops/toshiba-satellite-p205/removing-motherboard-1.htm

  • Toshiba Satellite P205-S6267 - DVD Burner unable to read DVDs only CDs

    Hi,
    Trying to reinstall Vista on my Toshiba Satellite P205-S6267 laptop but the optical drive will not read any DVDs at all only CDs. So I'm unable to install Vista which is only on DVD but WinXP on CD is detected and installs OK except for XP driver issues which makes loading XP useless. I have been at this problem for few days scouring various internet forums which mostly speak to the registry issue with lower and upper filters. But if I can't get the OS installed then those solutions don't apply to me. I need help. Anyone..anyone??? 

    Satellite P205-S6267
    You're in luck!
    Your model belongs to part-number family PSPB0U, which corresponds to part-number family PSPB0E for computers made in Europe.
    Go to the European download site and look up the Satellite P200 with Short Model No. PSPB0E.
     When you filter on Windows XP, you'll find 36 items listed.
    -Jerry

  • Toshiba Satellite C855-SS530 touchpad issues: left-click randomly releases

    Brand new Toshiba Satellite C855-SS530 Windows 8. My touchpad will very often respond erratically. As I hold down on the left button and scroll, often times scroll will randomly release and then sometimes re-engage. This will happen with web pages, holding windows, etc. I'll be dragging a window or file or what-have-you, it will release the hold of it's own accord (without me releasing the left button) then sometimes re-engage (picking up other random files, selecting stuff on the desktop or other random things I didn't want to do). Most often I am holding down the left button and scrolling down a web page, and it will randomly "let go" of the scroll (before I have let go of the left button). Occassionally the touchpad will not immediately respond. It's too annoying to keep this laptop.
    It isn't clear to me whether this is hardware or software related...Could be a bad button, bad touchpad, loose wire, or even a memory-glitch error which disrupts the touchpad signal. Does anyone know if this is a known issue with the Satellite C855-S5350. The touchpad is vital. It can't glitch out even 1% of the time. If I can't solve the issue, it'll likely be returned. I turned off most of the Synaptics silly stuff (edge swipe, etc) and it didn't resolve anything. There are nearly no services running eating up RAM so I have no idea why the touchpad would be freezing up...

    You might want to try these suggestions:
    The touchpad does not work properly
    - Peter

  • Toshiba Satellite L305-S5909 - DVD ROM / CD Drive will not Run CDs

    I have a Toshiba Satellite Model Name: L305-S5909 Part Number: PSLB8U-05302F running Windows Vista 64 with Service Pack 2. The Drive in my computer is, Mat**bleep**a DVD-RAM UJ88OES
    I really don't know when this started but we just discovered that our DVD / CD Drive will not run any CDs or DVDs inserted. When I check My Computer or Windows Explorer the Drive shows up. Also I checked the Device Manager and it's there also. I have tried uninstalling the drive and letting Windows Reinstall it and that did not help. I have also upgraded the computer bios also no results.  And I have tried different disks, cleaning the optical eye, etc. The eject command from the computer works but will not run anything inserted. 
    Any Ideas?

    i had the same problem with my L505D-S5965. you are going to most likely have to replace the dvd drive. the optical eye burned out in mine and from what you have already tried to do to fix it. that is probably what happened with yours. if it is under warranty you can send it to the depot or take it to a toshiba service center near you. if not you can change it yourself.it not to hard.
    hope that helps
    -civicman4-
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

  • [FIXED]Toshiba Satellite m45-s359 brightness issue

    Hi all.
    I recently replaced the screen on my Toshiba Satellite, as it had a large crack in it. Thing is, the new screen is WAY too bright. What was once white is now a blinding light, and what was once pitch black is now a light grey. The battery life has been affected as well.
    So far, with this laptop, it's been an uphill battle. The keyboard, although it has a brightness Fn key, hasn't been recognized by any distro I use, much less Arch. So keybindings are out the question. I have laptop-mode-tools installed, but there isn't a "video" folder in "/proc/acpi". The "/sys/class/backlight/" folder is empty as well.
    Anything anyone can offer on this problem would be greatly appreciated.
    EDIT: I've tried using xbacklight, but I get
    xbacklight -set 50
    No outputs have backlight property
    Last edited by Him (2011-03-05 17:50:30)

    Him wrote:...How hard would it be to install it? Just "make" and "make install", or is it a  bit more than that?
    That is pretty much it.  It is a single .c file, a README file, and a Makefile.  Let me try to compile it when I get home to see how it goes.  I'll tar it up and send you a copy by email to the link in your profile.  You will need to compile it for your system.  I'm pretty sure a module compiled on my system won't fly on yours.
    Edit:  No, actually.  I recall it is built as a kernel module and was built by slipping it into the kernel tree.  Not that tough.  I'll throw together some notes.
    Last edited by ewaller (2011-03-02 23:06:33)

  • Satellite Pro U300: DVD issue - error: cannot output to external monitor

    Hi,
    I was having problems playing a dvd on my U300.
    Basically the software would load but when I tried to play the dvd it said "cannot output to external monitor".
    Having gone through all options I could not find anything to stop this happening. I then downloaded the latest software from the toshiba site.
    dvdpl-20070807102909.zip
    I resintalled this but got the same error message.
    I then uninstalled the software and tried to reinstall but now it just produces an error mesaage saying it cannot intsall the software on this computer.
    How can I reinstall this?
    Regards,
    Mark

    I presume you have received the Toshiba Recovery CD. Am I right?
    On this CD you can find the Toshiba image file. This image contains the Vista OS, Toshiba drivers, tools and additional software.
    But note; you cannot install only a single program. To reinstall a application from the Recovery CD you have to format the HDD and have to reinstall the whole OS using the Recovery CD.
    As Gipsyman said, the Toshiba driver page contains update and the original preinstalled software is needed.

  • Toshiba Satellite S55-A5274 power issues

    My toshiba satelite s55-a5274 will not turn off to the power button even if held for over 15 seconds. The screen stays black and is not responsive. Im wondering if there is any type of reset button that will shut everything down that perhaps would be under the "hood" so to speak. The laptop will also not respond to the power adapter.
    Any information is good information. Thanks

    Hi I don't call this having to taking the whole thing apart???
    Page 96
    http://support.toshiba.com/support/staticContentDetail?contentId=4002312&isFromTOCLink=false
    Battery
    13
    4 cell/43Wh Lithium Ion battery pack (Not user replaceable)
    Battery Life Rating (measured
    by MobileMark™ Productivity 2012)
    o
    Included 4 cell battery: up to 4 hours, 22 minutes
    What do I know?? Sorry !
    Dokie! Hey Eagle what's up??
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • Toshiba Satellite A665-S6055 audio issues.

    A few hours ago I noticed my volume controls seemed to have a mind of their own.  The volume bar would go all the way down to zero, and noticed the system control panel volume buttons (above the keyboard, not the same model but you get the idea) would light up on their own.  Volume Up, Down, and Mute were lighting up and messing with the volume.  It was as if someone was pressing them.  Thinking it may be a virus of some sort, I ran Avast and Malwarebytes but both returned nothing.
    I then thought the system control buttons were bugging out, and decided to uninstall the TOSHIBA Value Added Package, which I thought would remove the functionality of said buttons.  However upon restart the problem has only gotten worse.  Now the Play/Pause button is lighting up randomly.  According to the control panel the Value Added Package was indeed removed, and I have not reintalled the latest version of it yet.
    Any suggestions?  My sound is essentially ruined.
    edit: I tried restoring the system to a few days ago but it didn't help.  After the restart yet ANOTHER button from the system control panel has started randomly lighting up.  I'm starting to think this isn't an audio issue, but an issue with the system control panel buttons.  I will reinstall the TVAP using this download and update this post with the results.
    edit: Reinstalling TVAP did not solve the issue.  The issue has actually escalated quite dramatically.  Even more buttons are being accessed now, including the wi-fi button.  I'm literally unable to access this website on my laptop because the wi-fi function keeps getting turned on and off.  I fear a factory reset is my only hope.
    edit: The issue goes away in Safe Mode.  Still doesn't really fix anything though.
    edit: Possibly fixed.  Unplugged power cord, forced shut down, removed battery and waited about a minute.  Plugged the cord back in as well as the battery.  Started it up, went to BIOS settings and reset it to the defaults (F9).  Saved the setting and continued the reboot process.  The issue appears to be gone.  I tested the volume buttons and they are working properly.
    HELP.

    "edit: Possibly fixed.  Unplugged power cord, forced shut down, removed battery and waited about a minute.  Plugged the cord back in as well as the battery.  Started it up, went to BIOS settings and reset it to the defaults (F9).  Saved the setting and continued the reboot process.  The issue appears to be gone.  I tested the volume buttons and they are working properly."
    Thanks for keeping a running edit of your progress as well as your ultimate solution!
    Maybe this will help other with a similar situation.

  • Toshiba Satellite pro sp6000 startup issues

    Hi There,
    I've been having problems with my sp6000 - it refuses to turn on most of the time. 1 in every 100 tries it might turn like nothing was ever wrong. Normally though, the green light turns on for less than second and then disappears.
    I have a feeling it MAYBE to do with the cdr/dvd combo drive - as it responds differently when this is removed, tho I havent got another drive at hand to test this theroy.
    Thanks for any help,
    Toby

    Hi Toby
    If You suspect the optical drive is the problem of your machine, simply plug it out and try start without it. That is supposed to work just fine.
    Good luck
    Tom

  • Broken DVD Drive cover on Mega 651 how do you reassemble it

    HI, I have a Mega 651 that i use as a media centre under my TV, unfortunatly my baby who is now crawling decided to rip of the drive cover that flips down when the dvd is ejected.
    I have reassmebled it, but cannot see where the 2 springs fit for the life of me?
    if anyone knows anythging about this then please let me know
    cheers
    j

    See the Labelflash User FAQ and get the software here.
    -Jerry

  • My SuperDrive on my iMac won't load any typre of DVD or CD and is shaded,How about a fix?

    SO when I try to load a DVD or CD in the slot on the side, my SuperDrive just ejects the disc. Any fixes out there. I notice that the SuperDrive is shaded in the about my Mac.

    You could try a commercially or retail available CD/DVD dry brush lens cleaning disc to see if this revives the drive.
    If not, It maybe your internal optical drive is dead.
    This is a common occurrence in iMacs. The optical drive is, usually,,the first piece of hardware to fail.
    Optical drives don't work very well in the vertical mounted position. That ans the heat inside the iMac are, usually, the cause of a failed SuperDrive in iMacs.
    You can either pay to have the internal optical replaced, or purchase an external optical drive plugged into your iMac.These come in a lot of price and quality levels.
    iMHO, the more expensive and durable tray loading drives have much better quality and longevity than slot-loading optical drives. You'll have to decide yourself what you want to use ii you go with using an external drives.
    Some users buy cheap external optical drives,,knowing in a year or two they will have to replace it. Others, like myself, would rather spend more money on a more durable drive that will last longer than a year or two with regular use.
    I'll leave these decisions to you.

  • Going crazy here!!! how do you properly set up ISP email on o2 (UK) !!!

    2 days now and email won't send!! It can be received but not sent.
    I'm using my ISP email on my new 3G iphone - i've just read that the OUTGOING mail host needs to be o2 and i have put in the o2 details.....
    OUTGOING – Host Name: mail.o2.co.uk
    OUTGOING – User Name: [email protected]
    OUTGOING – Password: your o2 password
    BUT still no joy - emails just do not send!! When i create an email and hit send it just says 'connecting' at the bottom of the screen (and we have 2 iphones in the house and this is the case with BOTH of them).
    can anyone please help?
    Message was edited by: Florence

    actually the test message i am sending is to my other fast.co.uk email account! I definitely know it's a working and valid account - though i'll try one to myself as well
    EDIT - actually - i just created the email account yet again on the iphone and POP account verification failed - i am entering these details:
    Settings > Mail > Add account > Other
    IMAP/POP/Exchange: POP
    Name: (anything you want)
    Address: [email protected]
    Description: (or anything you want)
    Incoming – Host Name: mail.gofast.co.uk
    Incoming – User Name: (gofast username )
    Incoming – Password:( gofast password )
    Outgoing – Host Name: smtp.o2.co.uk
    Outgoing – User Name: [email protected]
    Outgoing – Password: your o2 password
    Save
    Do you want to try setting up the account without SSL: Yes
    If Advanced setting are needed…
    Incoming – Use SSL: Off
    Incoming – Authentication: MD5 Challenge-Response
    Incoming – Delete from server: Never
    Incoming – Server Port: 110
    Outgoing – Use SSL: Off
    Outgoing – Authentication: Password
    Outgoing – 25
    i don't get a chance to do any advanced settings beacause the creation of the account fails because validation fails

  • SLow WIFI toshiba satellite C55-a and windows 8

    Hi I recently bought a new laptop toshiba satellite C55-A with windows 8 on it. My older laptop runs super fast with my WIFI internet. The new one goes like SLOW like hell. I mean I have 10 MB internet and it goes like 500 K Please I am really tired of looking on Internet to fix a problem of a NEW computer. Plus, once I plug my computer with the Internet wire it RUNS on 10 MB! THANK YOU!

    Hello!  I also recently purchased a Toshiba Satellite C55t-A.
    We have a desktop computer that is about 3 years old and another laptop that is about 6 years old.  We have an apple Ipad and 2 cell phones with wifi.  All of these devices work with our WIFI from our cable internet at high speeds.
    This new computer is so slow using Wifi that it isn't really feasable to use it for surfing the web.
    It has ran slow on WIFI straight out of the box...nothing has changed on it.  We perhaps should have returned it, but it was purchased for a specific project we needed it for on a time deadline, so it was too inconvenient to return it.  After using it for the project, it was past the return date.
    Anyways, I am hoping this is fixable...we would like to be able to use the laptop for online work.
    This problem isn't related to the position in the house (walls or distance) or the integrity/age of the router.  All other devices work at different points throughout our home with the current router.  This is the only computer that will not run at an acceptable WIFI speed.
    We also cannot restore the computer (it worked this way out of the box and there are too many files (hours of work) that we can't lose.
    Please, I would appreciate if there is any info that could help me.  I suspect some type of driver or software that came installed on the laptop must not be compatible with our router.
    Thank you!
    Mary

  • ITunes causes DVD drive to fail in Toshiba Satellite laptops

    This seemed unlikely to me and I was wondering if anyone had any similar experiences and/or suggestions.
    This morning I discovered that the DVD drive on my Toshiba Satellite laptop wasn't working - Device manager said it Failed to Start (code 10). I called Toshiba and they asked what was the last thing I'd done on the PC. When I said, "Updating iTunes," they said that was the problem, due to an interaction between iTunes and Toshiba Satellite laptops.
    Sure enough, uninstalling iTunes fixed the DVD drive.
    So now I have to install / uninstall iTunes every time I want to update my iPod

    Another thing to check on is a device filter conflict:
    iTunes for Windows Vista: Troubleshooting CD issues caused by device filters
    (One of the applications I' seen conflict in this way with iTunes on a Vista system is HP memories Disc Creator Software, which comes bundled with some HP digital cameras.)
    ... however, if you're still getting no CD/DVD drive with just the iTunes filters in place, you may be one of the unlucky ones who are getting the issue discussed here:
    Optical drives not recognized in Windows Vista after installing iTunes 7
    Although it wouldn't necessarily be a short-term thing, keep an eye on that document for updated information about the issue.
    In the short term, one workaround might be to use a different application to rip the CDs, and then use the "Add to library" function to get the ripped files into your iTunes. (That way you wouldn't have to continually uninstall/install iTunes.) The following document might be of some help with that:
    iTunes: About the Add to Library, Import, and Convert functions
    EDIT: sorry Jason, didn't notice you'd already replied here. Didn't mean to butt in.

Maybe you are looking for

  • TS3402 iMac with OS X 10.8.4 will not stay in sleep mode.

    After installing latest OS updates, 10.8.4,  we cannot get our iMac to stay in sleep mode.  Energy saving settings have computer sleep and display sleep set to15 minutes, put hard disks to sleep when possible and allow power button to put to sleep ar

  • Failure in Receiver IDOC adapter

    Hi, I have a File to IDOC scenario. In SXMB_MONI the message is showing successfull. But when I scroll to the right and see the status of the message in "Outbound Status" it shows ERROR on the outbound side. I went to tRFC transaction SM58 and checke

  • Sent Date/Time is not appearing in mail from Portal

    Hi All We have configured portal to send email. The functionality works perfectly fine except for a small problem. We get sent field as None in the email. Is there any setting/configuration required to display sent date/time ? Any help will be apprec

  • Currency to Non Leading Ledger

    Friends, I want ot give the USD currency to my non leading ledger. how should i do that? Please give me IMG path also. My co  code currency is INR. For my non leading ledger i want to give UDS currency. Right now posting in non leading ledgers are al

  • Exporting based on Object Styles?

    Hi, I'm hoping that Jongware or someone can help with with a question I have.  I'm wondering if there is a way with scripting to gather and export the contents of text frames based on their object style? So for instance, let's say I have a document t