Toshiba satellite L300D-01, system recovery not working.

Yesterday I was just on my laptop then it just suddenly turned off, with a blue screen (that didnt stay on long enough for me to read) when i tried turning it back on it would go as far as the green bar loading, then a black screen, I tried waiting for a bit sometimes load up is slow you know, but nothing happened, tried same thing over and over again, still the same outcome. so then I tried the system recovery to the out of box state, it finished but the drivers did not install.
and what happened was when I did that it said it was finished made my account name and stuff then the blue screen popped up again then shut off and restarted, then when I tried restaring again the same thing would happen over and over again. I tried one last time on the system recovery and my laptop would not stay on long enough to finish. so I dont know what to do, or whats going on or if theres even a wzy to fix this. if someone could give me any information please thank you..
also, Im kind of broke so cant afford to buy new expensive parts for it, and I live in a very small town thousands of miles away from a repair shop.

hello?? anyone. im tired of searching through everything online can anyone hgive me an answer please.

Similar Messages

  • Toshiba satellite a215-s4757 internal mic not working

    So up until a couple weeks ago, my internal mike on my computer was working fine. Then the other day when I tried to use skype it would not work. When I go into sound->recording devices it says that the "front mic" is not plugged in. When I click on it thought it says it is working properly. I tried to download and install the driver from toshiba and it said that it installed correctly but this did not fix my problem. I read here that some other people have been downloading a new BIOS and that that helped? would that be able to help my computer? i have windows vista home premium 32 bit i believe. any help would be appreciated

    Satellite A215-S4757 Specifications
    Satellite A215-S4757 Downloads
    Let's just try a proper system reset and see if this helps bring your mic back.  Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, boot into Windows, and test your mic again.
    Please let us know if this helps. Good luck.
    Mike

  • Toshiba Satellite S70-B - Keyboard backlight not working?

    Hello, I purchased a brand new Toshiba Satellite S70-B laptop with Windows 8 on it. When I received it, I removed the harddrive and installed a SSD with Windows 7 on it. After getting help from Toshiba support, all the drivers and harware seem to work except the backlight keyboard? I spoken to several Toshiba support techs and finally came to the conclusion to send it in to change out the keyboard. Yet I fear if I send it in, they will remove my SSD and reinstall a hardrive with Windows 8 as their solution. Does anyone have other suggestions... ?? Any help is appreciated.

    I am having problems with my keyboard backlight too. I spilled water on mine and had to totally take it apart, until then  I never had any problem with the shortcut key turning it on and off. I found this last night. Unfortunately. it didn't work for me Also became disappointed when I searched and searched for that magic timer on my desktop he spoke of. Let me know. 1) Shut down laptop
    2) Turn on and start tapping the F2 button until you get to the BIOS screen
    3) Scroll over to power management and change the setting for your backlit keyboard from off to on.
    4) Press F10 to save and continue to start up.
    5) Enjoy.
    Believe it or not, I JUST fixed this issue on my own a665D laptop. I am still tweaking it though because after this, the shortcut keys don't allow you to turn the backlight off so I'm typing on a keyboard who's LED's wont go off as of yet. But this should help for now.--REVISION: I am done "tweaking it" as I have found the answer and it was glaring me in the face. Instead of just turning it to the ON position through BIOS, turn it to TIMER. You can set the amount of time you want it to stay on when ever you press a key and the FN+Z shortcut works when this is set up so you can turn the keyboard on, off, or to follow the timer right from your desktop. I hope this helped.
    Asker's rating & comment
    5 out of 5
    You are officially awesome. Worked perfectly; I never would have ventured into the BIOS without an exact guide like you gave (Would have blown up the laptop or something lol). But anyway, thanks so much,

  • Toshiba Satellite A505-S6033 Indicator Lights Not Working

    I have a Toshiba Satellite A505-S6033 that all of a sudden does not have its ac power and batter power indicator lights working.  The power and hard drive activity lights do however work.  The laptop works fine on both AC and battery power as well as the battery recharges no problem.  I tried the cord and pack from my other Toshiba laptop and still no lights.  I also changed out the charge cable with a new one after this assuming a short in the cable.  Still no lights, however everything works.  Please help as I am at a loss why only these 2 indicator lights out of the whole strip do not illuminate as well as the laptop still works fine.  Thanks in advance for any help you can provide me.

    leds burn out too.  you could replace or just use as-is.  they really aren't necessary anyway.
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Toshiba Satellite C850-F12S Function Keys not working

    I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

    Hi Eldorado
    Thanks for your suggestion. Have done as you said but still have the problem.
    I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
    I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
    Cheers
    David

  • Satellite L300 (PSLB8C-0H901X) does not work

    My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no POST, nothing, Get power and charge lamp when pluged in nothing else, any known issues? Any fixes, Thanks in advance for your help.

    Hmm sounds like a serious hardware issue.
    If you are a lucky man the issue could be related to RAM module.
    The RAM modules can be replaced easily. The memory bay is placed at the bottom of the unit secured by one screw.
    But the question is if its really related to RAM.
    Well, you will know this if you would replace/check this
    Otherwise I recommend asking an professional notebook technician for a help

  • Toshiba Satellite A505 crash/ file recovery

    I have a Toshiba Satellite A505 that suddenly crashed. Worked fine when I shut it down the other night. Wouldn't boot up the next morning.  I've tried using the recovery CD. with no luck. Tried the AVG recovery Cd with no luck. It won't run in safe mode. Will load drivers up to avgidseh.sys and then stops.  I've removed the hard drive, It does seem to be spinning ok. Hooked it up to another computer where it gets recognised but it won't open or anything. In fact when I try it stalls out the other computer. I've tried UndeletePlus but that also just locks up.   Any ideas anyone? I'm a photographer and was bad and didn't get some of my latest photos backed up. I'm not too worried about getting the computer back up and running but I'd really like to be able to get at my files off the hard drive if possible.  Thanks.

    Do you need any further help, Dave?
    Two thoughts..
    system volume on disk is corrupt.
    You may be able to resurrect the drive by running this at the command prompt in WinRE.
       chkdsk c: /r
    I am being told that I don't have permission to do that. 
    You've apparently solved this somehow.
    The usual remedy is to take ownership of the files/folders. See KB823306.
    -Jerry

  • Logon to system is not working in ChaRM solman 7.1sp2

    Hello,
    I have configured Urgent change in solman 7.1sp2 version.
    Logon to system is not working in Landscape bar.
    Please help on this.
    Regards,
    Karthik

    No authorization issue. Using the RFC's i am able to logon to satellite system.
    In Solman 7.1 ChaRM , Creation of Request for Change(Rfc) in CRM Web Client UI Interface.
    So they removed Logon action in SMHF, added in Landscape Block in portal page.
    Both Logon to system(Landscape Block) and Maintenance cycle (Related Transcation block) not able to open.
    It doesn't show any error in trace.
    I have created the SAP ticket for the same.
    Rg,
    Karthik

  • Toshiba Satellite A505 - Operating system windows 7

    Toshiba Satellite A505 - Operating system windows 7
    1) Unable to get the main part of my touch pad to respond to tapping.  In the control panel we made sure that tapping and tap zone was enable.  Someone said to hold fn & f9 simultaneously but it still doesn't let me tap on the larger main part of touch pad. 
    2) When trying to turn up volume by + sign it makes a alarm sound (PC beep) and as soon as I let go it goes back to where it was.  When using icon in system tray it does the same thing (alarm sounds (PC beep)  and it automatically goes back all the way down). Even going into control panel >sound>speaker >properties to turn up volume does the same thing.  Any help with these two problems would be greatly appreciated.

    ok number 1, try going to ''device manager'' which is found by typing it into the white box when you press the start windows button in the far bottom left corner, the find the device that controls your touchpad... e.g (smart pad etc), it should be easy to find under ''mice and other pointing devices'' then id like you to ''disable'' the device, ignore any messages, and then wait a few seconds, and go back and ''enable'' it, then restart, this should resolve the problem, otherwise its a case that it is damaged, or needs updated drivers or re installing, but try that first...
    Number 2, this is an ongoing problem, and should only last for a few mins until it fixes, if the problem is more serious try this: go to the speaker icon, and right click, then click, ''playback devices'' then the tabs at the top? you see one called ''communications'' well, click that tab, and change the setting to ''do nothing'' see if that resolves it. if not i obviously have more complex solutions, im just giving you thr most common fixes.

  • The operating system does not work

    my friend has white mackook pro, the operating system does not work. When i click the power button, it starts booting but it never open the the welcome window. How i can solve that problem?  i do not have cd from mac OS. thank you.

    If you do not have an install dvd youll have to take it to an iStore ...
    (I doubt he has lion, so the recovery partition doesnt exist)

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • System.out not working on eclipse

    Greetings...
    I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
    I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
    package one;
    import java.util.Scanner;
    public ClassOne {
    public static void main (String args[]){
    Scanner reader = new Scanner(System.in); /*Works just fine here*/
    int x = 0;
    System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
    Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
    }Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
    If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
    Thanks to all, and happy 2009.
    Santana T

    Santana_Thiago wrote:
    It works on NetBeans.
    On eclipse I get the following error:
    ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
    *JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
    The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
    Thank you.
    Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up!

  • A device attached to your system is not working!!

    I am trying to connect to Oracle8i Personal Edition through a JDK1.2.1 application using the classes111.zip or classes12.zip package. After running the application I get this error message: UnsatisfiedLinkError: ocijdbc8: A device attached to your system is not working. I you have any idea what is happening, please answer inmediately.

    You are using the oci8 driver so your program is looking for the native mode Oracle Client software. Install the Oracle Client software or use the thin driver.

  • My sound system is not working after my last updates on my imac,what shall i do to get fixed?

    Hello any body who can help me out here?
    My sound system is not working on my imac after the last updates,
    WHAT SHALL I DO FOR????

    apollos211,
    You marked this as solved, so chances are no one else will respond.
    You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
    Also check in system preferences>sound >output and see what is selected there.
    If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
    Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
    All the best

  • External sound system is not working

    Hi, the sound system is not working for my MacBook. It is working perfectly for my PC, however, when I plug it into my mac, every sound playing is being paused (e.g. iTunes are being paused on the second playing). What could be the issue?

    That is what I am asking. It just does not make since that the Macbooks audio out/headphone plug works on some systems and not on that particular system.
    If the system you are trying to use does not plug into the AC wall socket to get power then that could be one of the problems. But I believe you have try to tell us that is does plug into the AC wall plug and then plugs into the Macbooks headphone plug.
    Is it possible that the Jack on the sound system you are experiencing problems with is bad?
    Does the sound actually pause or just cut sound in/out similar to how a loose speaker wire might sound like?
    Have you tried using this sound system on a different computer to see if the problem still exist?

Maybe you are looking for