Toshiba Satellite L750 won't start at all.

Hi, I own a Toshiba satellite l750 (part number PSK2YA-04K010) and rather unexpectedly, it's just refusing to start. The lights at the front are on for the power adaptor, so it's not the power supply, and the power light flashes for maybe three seconds when I press the on button, but the laptop does not even start (no fan noise or anything". The power light seems to flash periodically at random as well. I've had the laptop since May at last year, and in December I had to get the hard drive replaced. I did get a blue screen with the message "Kernel page error" maybe a week ago, but other than that, no warning signs. If any one could help, it would be great. Thanks.

Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery. Also, check that the RAM is inserted securely. Instructions can be found in your user's guide if you need.
If that doesn't help at all, contact support in your region to seek service.
- Peter

Similar Messages

  • Toshiba satellite c655 won't start

    toshiba satellite c655 when I start it up it gets to the first screen that says "Toshiba Leading innovation" blinks then loops only responding keys are F2 and F12. I tried holding "0" to restore following the virtual help desk's instructions but that doesn't work. Anybody know what the probloem could be or have a solution?

    Peter wrote:
    Try this. Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
    If it's still unresponsive, you may want to contact customer support at (800) 457-7777.
    Gave it a try just now, not effective. I'll give customer support a try let you know if I get anything from it.

  • Toshiba Satellite S655D won't start.

    Laptop is running Windows 7, won't start at all.  Fan won't kick on, can't hear the hard drive,.  Power light is on, as is battery light and AC light.  Sometimes when trying to start  the power light will be on, and the battery and HDD light will flash.  Also, the hard drive light will quickly flash when first trying to start
    was able to have data transferred from hard drive,but don't know if hard drive is still operational. What might be the problem? thanks

    Hi! See if you can burn one of these and boot with it. If the fan is not coming on that is not a good sign.http://pcsupport.about.com/od/toolsofthetrade/f/po​wersupplytest.htm
    http://pcsupport.about.com/od/toolsofthetrade/tp/t​ophddiag.htm
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • Satellite A110 - won't start at all!

    My laptop won't start up. The battery will not charge, but the laptop won't start up even on mains power (with or without battery in place).
    Any ideas?
    Thanks

    This sounds like a mainboard issue
    Have you tried to remove the battery and AC/DC adaptor? Remove both and wait one hour then connect the battery and AC/DC adaptor again.
    If it doesnt work you should contact an authorized service provider for help. The technicians can help you to check the notebook.
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

  • My Toshiba Satellite A505 won't start up....

    My pc was running fine. It shut down because we forgot to plug it in and charge it. When I did plug it in, I commenced to shut it down. When I tried to start it back up, NOTHING HAPPENED! There are lights telling me that I'm getting power, but NOTHING happens on my screen.
    Can I fix this? Or, will it be covered under my 1 year warranty from Toshiba?

    I have the same model, now 8 mos. old. Has worked great, until we went on vacation.I shut it down, closed the cover,I think for the very first time.It has never left my desk, so not abused in anyway.I came back after a week, opened it, turned it on, and got a white screen with vertical thin colored lines across the screen.It looked almost as if it was in the midst of defrag. I shut it down a few more times,and the same.Came on here and sombody had posted something about the battery and having it shutdown and plugged in for a period.I took the battery out, waited, tried it again.At one point I got the screen with the space for my password, then it like faded away.I finally gave up and called tech support. Useless....no clue, in spite of this similar issue posting here several times.Told me to plug in an external monitor(I had one oddly).If it worked on the monitor, I could take it to Best Buy to have it repaired under the warranty.He said to call back the next day after trying this and they would tell me what I needed to do.I plugged in the monitor, and perfect!!!At the same time, I noticed that when I close the cover part way, in order to see the other monitor,the laptop display screen was working as well.When I saw that,I lifted it up, and  it went right back to the white with lines, and distortion.The external monitor continued operating.Now seems to me, it doesn't take a mental giant to figure  out there is something going on in that hinge area.So I call back with the case number told the person(foreign of course) exactly what happened, and said, so I can take it to Best Buy and they can fix it, right?NOPE! He tells me the total opposite of what the guy the night before had said.Gives me another case number and says, I have to send it to their "repair depot" and will take 7-10 days from when they receive it!!!Best Buy can fix it, but only if you paid the extra for their warranty, not under the Toshiba one.So I'm in the very beginning stages of a brand new direct marketing business that relies on internet access....I ask for a supervisor..of course none there."Call and talk to customer service", they aren't open now, you'll have to call tomorrow.". So I have posted on Facebook never to buy Toshiba...I loved my first machine of theirs, but 8 months old, really??? and you can't replace or repair it immediately, really?? It's obvious it's some design issue, seeing there are others with the exact problem. So if you really need to use it, hook up an external monitor, or try using it only partially open and see what happens!! I'd love to know if your problem is solved if the top isn't completely open.Also read a few disturbing things on here about their "repair depots". Anybody know the real truth about those??

  • Satellite L500D won't start

    Hello,
    My Toshiba Satellite L500D won't start.
    When I start my laptop the three lights on the left light green, the two on the left are not green or red. I hear the coolingfan, no beeps at the startup. When I start the laptop with a systemdisk it's the same, nothing happens.
    I contact the supportdesk and they said that it could be the harddisk, this sounds a bit strange to me because I can't start it with a systemdisk.
    I hope someone can point me in the right direction
    Buddy

    Hello,
    The notebook is my dauther's and I'm pretty sure she hasn't update the bios. She is 14 years old and she does what 14 year old girls do with their notebook. Gaming, hives, chatting etc.
    What she told me is that she had some problems when starting the notebook. It didn't start correctly, she had to push the powerbutton several times, sometimes maybe like for half an hour or so, then suddenly the pc woke up and did start. SInce a few days nothing works anymore.
    The screen stays black and I hear no beeps, just the coolingfan and sometimes a noice asif the hd was trying to start. The coolingfan also doesn't run properly, it makes a sound like an automobile that runs irregular
    Buddy

  • Satellite L30 PSL33E won't start at all - LED flashes six times

    Hello,
    My poor mother is quite distraught! Her Satellite L30 PSL33E has just died.
    It completely shut down and now won't start at all.
    Orange light flashes six times when the power button is pressed.
    No hard drive, fan, screen or any other noise / activity.
    She has tried it without the battery.
    Some sort of hardware failure I imagine.
    Any ideas what this blink code means?
    Thanks in advance,
    D.

    I dont know what the code means but you can read it; short means 0 and long means 1
    Anyway, the error code means that an hardware fault was detected on the motherboard and only the motherboard replacement could help you?
    Why?
    because is really hard to repair a notebooks motherboard.
    Its mostly not possible if you dont have enough knowledge, experience and special tools.
    I think either you will contact the ASP in your country and will ask for a fix or you will have to buy a new notebook ;(

  • Satellite P300-13M won't start at all

    Hello everybody,
    my Satellite P300 - 13M with product number PSPC4E won't start at all!
    When I put down my screen, it automatically goes in hibernation mode. But the last time I did this was just too much apparently.. I've ejected my battery and put the adapter in to see if it would start. Negative. I've put the battery back and ejected the adapter. Negative. I've connected both the battery and adapter. Negative, no result at all.
    Does this mean the end of my laptop?
    Please help me as fast you guys can because this is my only working laptop.
    Many thanks
    Ps if you want specifications, then i cannot give you them. I don't know the specs by heart.

    On this virtual way it is not easy to say what is wrong there but if there is no reaction at all Im afraid mainboard is death.
    In my opinion repair is probably not the solution. New motherboard costs a lot of money. Either you can find used one, maybe refurbished and exchange it or sell notebook on eBay and buy new one.

  • Satellite Pro 2100 won't start at all - LED start flashing

    My SP2100 has started having power problems, and now won't start at all. The AC adapter green LED is on, as are the relevant lights on the laptop body (although the 'battery charging' light always stays orange these days). When I attempt switch on, boot up starts (and has in fact been successful on occasion until this morning), however the battery indicator and the adapter lights start flashing, and everything shuts down again.
    On the rare occasions when I get past this stage, the lights keep flashing, and the system soon shuts down again with a 'low battery' screen message. Until this morning, it would sometimes settle down, the computer stayed on, and the lights showed a steady state as normal.
    I initially thought that the problem was obviously the battery or the AC adapter, but now I'm beginning to think that it lies with laptop's internal power adapter (although I suspect that the battery is probably shot following all this part charging and discharging).
    Any ideas?

    Hi,
    I think you are right. Flashing LEDs are a sign that some hardware is faulty.
    I can't say what's exactly the problem, this should be checked by a technicain.
    On the other side I'm not sure if it is worth to repair such an old machine.
    Bye

  • Satellite A100 - Won't start up Windows

    Without changing anything, my Satellite A100 won't start up Windows.
    A screen with with Windows foutherstel (failure recovery) gives two options; start windows normally and start up recovery. When I push the first option, there is a quick blue screen, what disapears too fast to read the tekst. Finally the screen failure recovery comes back. in the other option there is a screen Options for system recovery who's said; Can not start the installated program. Click on Ok to shut down the computer.
    How do I fix this problem?

    Hi hans_3,
    Maybe something has muddled up the Windows registry or some important system files and so you cant start Windows anymore or start the system repair option.
    I think in this case its necessary to reinstall Windows. Therefore you can take the Toshiba recovery disk that brings your computer back o factor settings where all drivers and tools are already installed but it wipes the whole HDD.
    It takes only few minutes and needs some clicks.
    Good luck! :)

  • I killed a MacBook Pro. Shutdown with flash in drive and now it won't start at all.

    I may have killed my MacBook Pro OS X by accidentally restarting  with  a Flash Drive it it and now it won't start at all.  Any ideas?

    So it is powering on. You did not state that before. In that case:
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see this if above doesn't work:
    Install OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.
    This should install the original version of OS X that came on the machine.

  • ITunes kept freezing and now it won't start at all

    It all started when I downloaded an iTune U class that contained a lot of videos and chose to download all old episodes. It turned out there so many that it would take 25 hours. I tried to abort the downloads, but apparently that messed something up. 
    First iTunes started up normally, tried to download "83 items" and then started to freeze up after a minute. I had to shut it down via the Task Manager.
    Then it got worse, and now it won't start at all. After I click on the icon to open iTunes (I have Windows 8) the screen turns white, the blue wheel spins and nothing happens. When I hold the cursor over the iTunes icon in the task bar I can see two preview tiles (one for Download and one for iTunes itself), but both are blank (all white) and nothing happens - the blue wheel will spin forever. What do I do?
    I do have the latest version of iTunes. If I uninstall and reinstall iTunes, will that solve the problem? And will the content of my library still be there?  Thanks!

    Hello, J Appleseed. 
    Thank you for visiting Apple Support Communities. 
    You can try an uninstall and reinstall of iTunes to see if that resolves the issue.  Your iTunes library will not be deleted by doing this.  However, this issue could be a result of multiple issues so an uninstall/reinstall may not resolve this.  Below, I have included the best articles that will help you isolate and possibly correct this issue.  Process each step and test the results after each step processed. 
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/ts3125
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    Cheers,
    Jason H. 

  • 17" Macbook Pro won't start at all.  I shut it down last night at 80% and now there is only black screen, no light, no sound.  What to do?

    My 17" Macbook Pro won't start at all.  I shut it down last night at 80% and today I get only a black screen with no sound, no light, nothing.  The power cord light does show orange when plugged in.  I don't know exactly which OS it is. It's model # A1286. I've tried all the tips about holding down different keys to no avail.  Anyother ideas?  (The serial # is w8******agu if that helps.)  Many thanks.
    <Edited By Host>

    I had the exact same issue...  Macbook Pro late 2008 with Core2Duo.  Went to all the steps suggested in the knowledge base, tried to reset the SMC, but to no avail.   Took it to the Macstore in Mexico, the wanted to replace logic board for $800....  Finally, I sent it to a logic board repair service, where they "fixed"  the logic board for $200.  It worked perfectly for 4 months, then happened again   
    Any ideas??  I would appreciate any help!!!!!

  • If the system won't start at all

    I have just purchased a MSI K8Neo 2 FX S939 motherboard second hand. I have installed a AMD 64 3200+ CPU and two 256M DDR333 memory modules
    and a NVIDIA 6600GT 256M DDR3 videocard on it. These components worked prior on another motherboard. Now the system won't start at all.
    The following observations has been made.
    1) All fans start to spin including CPU fan videocard fan and the fan on the mb chip and the power LED lits up.
    2) Nothing else happens. No display no sound from the internal PC speaker.
    3) If I press the reset button nothing happens at all
    4) I must press the power button for several seconds to turn of the power from the system
    5) The mobo was not delivered in a ESD bag but wrapped in towels. Does that make ESD damage likely?
    What conclusions can be made from that? My own opinion is that the CPU never starts working. Otherwise shouldn't there be some beep from the PC speaker when an error is detected? I have carefully checked all connections

    Quote from: Henry on 29-April-09, 07:26:15
    Q-Tec PSU. 
    You are wasting your and our time untill you get rid of that piece of garbage, you are lucky anything at all worked with it.
     Buy a real PSU, not a wanna-be like Q-Tec. For that PC a Corsair CX400W (+12~30A) 0r VX450W (+12V~33A) would be good. If you might need more power for the future you might want to consider on of the Corsair TX series or PC P & C 610W or 750W. Whatever you do don't get a cheap PSU, get one you can depend on.
    Yes I know I shouldn't ask much of a Qtec PSU but I doubt that it is the reason for this problem. Even a QTec should be able to let the speaker make a beep sound at least. My current MSI setup require rather little power. Got no PCI cards or USB units. Only one harddrive and one DVD Rom. According to the web power supply calculator I need a little bit over 200W and the PSU you suggests would be expensive
    http://www.extreme.outervision.com/psucalculatorlite.jsp

  • Pavilion G6-1b59wm won't start at all

    Good day .. I have a Pavilion G6 that won't start at all when the power button is pushed. I've tried it on battery only, and with the power cord plugged in. Yet nothing.
    Here is what I see: When the power cord is plugged in, the power LED next to the port is white. I press the power button and it momentarily flashes white (and the F12 LED flashes). Nothing else happens. No other LEDs lite, and the screen remains black.
    DIagnostic steps followed:
    1. Battery was removed, and unit unplugged. Power button held for 30 seconds, and plugged back in. Nothing.
    2. Battery removed and unit plugged into the wall. Power button pushed and nothing.
    3. Tried a different power cord, different battery .. nothing
    4. Removed the RAM boards, power button pushed .. nothing
    5. Removed the hard drive (RAM still uninstalled), power button pushed .. nothing
    Any further suggestions ?
    This question was solved.
    View Solution.

    This should help you locate:
    http://www8.hp.com/us/en/store-finder/index.do
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for