Toshiba satellite p70-A dead after update to bios v 1.5

hi there i have toshiba satellite p70 with win 8.1 after updating bios from v 1.40 to v 1.50 the windows don't stop to give me blue screen . i try ti install anther version of Win but i have the same problem.plz help me

Satellite P70-ABT3G22
Bug Check 0x113: VIDEO_DXGKRNL_FATAL_ERROR
I reinstalled the windows 8.1 but the second error code is still happening,
If this occurs just after restoring the hard disk to its original out-of-the-box contents, then you have a hardware failure.
If you installed Windows 8.1 instead of restoring, you need to restore to factory-new from a recovery drive in order to be sure.

Similar Messages

Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uni

Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uninstall it, re-boot and re-install again, bit the same process repeats itself and once again I have to uninstall and re-install again. I don't know if windows update interferes with it? Has anyone else had a similar problem? Is it fixable?

I think you'd be much better off asking in the Acrobar forum, Acrobat

Dead after update (Nokia X6)

Hello All!
Yesterday, I tried to update my X6 (16 gb) through Nokia Software Updater. I don't know what happened but my set is dead after update. I guess the update process failed somewhere. I do remember getting an error to connect the set again.
I tried to use Green+Red+Camera + Power on method but my set starts to continuouly vibrate while the screen is all blank.
Can someone please help me how to revive it back to life. Thanks,.
Solved!
Go to Solution.

here you go
/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Problem after updating my bios

HY ,i have hp envy 4 model:4-1056txproduct: B9K48PAmy problem start after updating my bios in driver support hp website but when i execute the file my pc retart itselfenow i have problem in the task manager show that i'm using 70% of my RAM (i have 4 GB ) but me using just 300MB of my RAM and my pc so hut .i try to recover my bios by clicking windows + B and start/shut button buuton nothing desplay .can you give me methode to return version of my bios (that cams with my Pc ) .or another thing to resolve the problem .

Nvidia monitor couldn be load after updates the bios 1.9...

Halo....Have anyone used NVIDIA monitor? I'm having a problem using that applications and prompt an error message after updating the BIOS V1.9.. Anyone has any opinion on it?
Btw using Norton Ghost 9 and Raid0 which is better? Cos I wanted to knoe as I want to installed my other's PC which!!

K8N Neo2 isn't supposed to be supported by ntune (only nvfirewall and nvraid through ntune-lite) , so I would say it a good thing it blocks access
considering the mishaps people have had in using it for tweaks .
http://www.nvidia.com/object/motherboards.html

Re: Satellite L40 - Black screen after updating BIOS

Hi everyone,
I have exactly the same problem as reported here:
http://forums.computers.toshiba-euro...threadID=35156
My portable is a Satellite L40-150 (Model PSL48E) It came with Vista and BIOS version 1.60
I updated the BIOS to version 5.50, because I wanted to install Windows XP. The BIOS update process went fine and the computer automatically restarted. Upon restarting, I entered the BIOS (pressing F2 key). I pressed F9 to load default settings and exited the BIOS, saving the changes.
The laptop restarted and the screen is now completely blank. Nothing appears in it.
I tried removing and then reinserting the RAM modules, but it didn't help.
So, I guess the only option is to return the laptop to a service center?
Why is Toshiba doing this? Are they doing this on purpose or what?
Regards.

I meant why is Toshiba releasing a BIOS upgrade that can render your laptop useless? (I've tried all the recovery methods they mention on their web, including turning on the laptop while pressing F12, but none of them work)
I've routinely upgraded the BIOS on all the computers I've owned through the years, and I've always reset the BIOS to its default settings right after upgrading. It's a procedure recommended by all manufacturers.
They all recommend to restore BIOS defaults after an upgrade because sometimes there can be some "leftover" configuration remaining from the previous BIOS version.
I upgraded the BIOS prior to installing Windows XP because it's the logical thing to do. Toshiba offers two different BIOS versions for my laptop, and the clearly state that one of them is compatible ONLY with Windows Vista, and the other one is compatible ONLY with Windows XP.
Could you tell me why should I install Windows XP on a laptop that has a BIOS designed for Vista? Common sense dictates that you should first upgrade the BIOS, and then install Windows XP.
I've contacted Toshiba's technical support and they will replace the laptop free of charge, because it's still under warranty.
I admit I'm satisfied with their customer care services, but I'm surely disappointed by their Quality Control. It has failed miserably in this BIOS release.
Regards.

IPhone 5 dead after updating to iOS 8.0.2

After updating from 7.1.2 to 8.0.2, my iPhone 5 cannot charge and is not recognized by my Mac. All original cables. After 24 hours, the battery is dead, so there is no way to even find a solution by restoring or anything. It is a brick. If I were to replace the battery by myself, I still would not know how to proceed, software-wise, as not able to downgrade back to 7.1.2 (where everything was fine) and not sure of iOS 8.1 fixes any of this.
Any ideas welcome. Been surfing the web for weeks and still no solution found.

Hi! I always reset my network setting after every update of iOS because of the battery drain. I did the same for iOS 8.02, but to no effect. The problems I am experiencing are:
1. battery drain - just around 4hrs of regular use instead of 8hrs
2. the phone lags even when answering calls
3. frequent signal drops and the phone heating up
4. reset by itself yesterday while i was switching between apps
I also updated an iPad mini first gen, but has no problem so far.

Toshiba Satellie L655-s5191 freeze several time after update the Bios from 2.3 to 2.8.

satellie l655-s5191 freeze several time after updating bios

If the RAM and HDD have been ruled out, then it is either a motherboard or CPU issue, and would require service to repair.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Satellite A110-195 after update of bios ask for password

After i update the bios that i download form the toshiba website for the laptop and update if from the windows he ask for the reboot. After reboot notebook start asking for password for bios and system password too. now i cant get to the system.
I try default passwords like Toshiba,BIOS, CMOS, phoenix, and PHOENIX. and didn't work. CMOS battery in a110-195 is soderd on motherboard. Is there any jumpers that i need to bypass to clear cmos.

Hi
Thats strange buddy.
Why should BIOS set a password automatically after the update???
Anyway. As far as I know the BIOS password can be removed only by an ASP technician only these guys know how to remove the BIOS password
I think the ASP is your last chance to get the BIPS password removed from the system

Nano dead after update

Just installed i-tunes 7
After updating my nano, it gave an error message and a folder icon. spent the night at the apple support site to fix the problem. End up with dead nano.
Have to sent to apple for repair
Thanks Apple for your new software!!#%#
deem NL

try this ipod trouble shooting
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

N73 dead after updating from nokia online firmware...

can anybody help me i have a n73 it belongs to one of my customer he has a software issue.. the phone was freezing.. i tried to update it with the online firmware update from a nokia software.. after updating the phone wont turn on anymore.. can anyone help me about this issue.. thank you..

ok guys, please be advised that upgrading N73 is not something everyone can do! Please view the software upgrade page completely before upgrading your phones. It is all stated there already.
Here is a quote from the page:
Please note that not all N73 models have new software available. Nokia produces many different variants of each product (for different countries and languages) and not all variants have updated software. It is our priority to update all variants as quickly as possible and we apologize for the delay. We will let you know as soon as new variants do become available. (24-Nov-06)
Nokia N93 updates are temporarily unavailable due to maintenance. You can still download and install the Nokia Software Updater application to your computer for use with other compatible Nokia products. (16-Nov-06)
Firmware upgrading is something serious. Please read everything before upgrading it!Message Edited by mmubashar on 14-Jan-2007
12:15 PM
-= If you laugh at someone on their problems, you are laughing at yourself for the same problem you faced once ago =-

Touchpad on Toshiba Satellite L455- stopped working after 3 year old pushed something

I was away from my computer for 10 seconds... My 3 year old pushed buttons with both hands... I cannot get the touch pad to work now!
Computer is Toshiba Satellite L455-S5975, running Windows 7 Home Premium
Any suggestions?
Solved!
Go to Solution.

Try reinstaling the driver.
Synaptics Touch Pad Driver for Windows 7 (32/64)
-Jerry

GS70 Stealth after update new bios and firmware

my GS70 after update the new BIOS w8_E1771IMS.50E and Firmware w8_1771EMS1.508 now laptop become so warm...
when i am playing game the CPU temperature can reach 90'c。

4th Generation Core i7's are pretty well known to generate more heat than the 3rd generation, and as such the expected temperatures for the mobile chips has tended to be higher than the previous generation.
90C is getting hot. On top of all that, you're in a GS70 case, which is small and very enclosed, which means the cooling is going to be even worse. 90C all things considered, isn't terrible. At 100C I would start worrying.
If it worries you this much though, call MSI and see what they think.
>>How to contact MSI.<<

N560GTX-Ti OC freeze during CoD4 MP after update VGA BIOS with Live Update

hi
I updated the bios via live update , and i want the stock one back couse cod4 freezes my pc after a few minutes so i cant play
please help me.
(i am sure thats the problem couse i could play the game before i done that update... i thought it will be useful since it was telling me there was an updat, and updates usually great , right? )
s\n : 602-V238-130B1103125151
thank You in advance.
oh and please tell me the exact right way to update it, i dont want to fry my vga card

well i reinstalled my x64 win7 after the bios update (full wipe) and the problem remained the same...
also tried older nvidia drivers too( but i played the game with the newest without any errors) and tried the stable one that was with the vga. still freezing the game

Z77A-GD65 issue after updating to bios ver. 10.10

Hi,
after updating to the newest bios version 10.10 I've got this issue. I did clear CMOS. Everything seems to work correctly I've haven't got this before on bios ver. 10.8
.

My update bios ver. 10.10 was success but fail boot up when HDD connect to port 7 or Port 8 it fail.
Please help, i got SSD on Port 1 for windows port 2 - 6 2TB HDD and port 7 & 8 3TB HDD
this issues really want to

Toshiba satellite p70-A dead after update to bios v 1.5

Similar Messages

Maybe you are looking for