Toshiba Satellite P875-S7310 second HDD question

I just purchased a Toshiba Satellite P875-S7310 (http://us.toshiba.com/computers/laptops/satellite/P870/P875-S7310/) and was hoping to install a second hard drive (SSD) to improve load times and boot times. As I understand it is rather wasy to install a second SSD into the P875-S7102, as it has a second hard drive bay, but I'm unsure about the P875-S7310.  Technical support hasn't been of much help to me so I figured the second place to ask would be here. Does the Toshiba Satellite P875-S7310 also have a second HDD bay or will I need to do something like remove the DVD drive and buy a HDD caddy to install a SSD into this laptop?
Thanks a ton if you can provide me with any information,
Nianni150

The problem with those spec sheets is that they don't list the P875-S7102 as having a second hard drive buy, but in in fact does. It also seems to be compatible with whatever the bios firmware is and allows a SSD to be run seperately.
For reference here is the second hard drive bay for the P875-S7102 that was confirmed on this forum to function. I've attached a picture of the back of the P875-S7102 I've ordered which seems to have the same configuration. I guess my question is if anyone knows whether or not the BIOS supports a secondary hard drive and if there is a SATA connection. I was hoping to buy the SSD now and have it arrive at the same time as the laptop. but I'm hesitant to do that since I'm unsure whether it will work or not.
Attachments:
p875-s7310.jpg ‏105 KB

Similar Messages

  • Toshiba Satellite P875 S7200- Motherboard

    I have been searching for the name and motherboard information for a Toshiba Satellite P875 S7200. I have searched everywhere and cannot even find a break down for that computer. I really don't want to mess anything up as I have other projects to do. I am wondering if anybody could tell me the model number for the motherboard in a Toshiba Satellite P875 S7200.
    Thanks for your time it is very appreciated!

    I believe it's V000288120.
    - Peter

  • Satellite P300-20H - Second HDD caddy

    Satellite P300-20H, PSPC8E
    This laptop has a second HDD bay and a second drive works in the bay.
    I have tried in vain to find a HDD caddie for the second HDD bay, can anyone point me in the right direction for the part number or a shop that sells them.
    Thanks

    I have upgraded brothers P300 with second HDD but I didnt use HDD bay. I have just fixed second HDD to stay in the same position with piece of plastic so that HDD will stay in place.
    You can also contact Toshiba service and ask for help. I am pretty sure they have such HDD bays used before and can imagine you can get one.
    Visit also eBay/notebooks and check for Toshiba hard drive caddy. I saw several bays there.

  • Satellite A200-27R - Second HDD possible?

    Hi all, just wanted to know if its possible to buy a hdd cady to fit a slave hdd in spare bay ? [SATALLITE A200 27R]
    if not can anybody tell me what its for. Thanks and
    All the best Dave

    Hi buddy,
    The question is: Do you have a second HDD connector?
    If yes you can buy such a second HDD caddy from an authorized service provider.
    Otherwise its not possible to a add a second HDD.

  • Toshiba Satellite L655-S51117 VGA Port Question

    I have a Toshiba Satellite L655-S51117 with an Intel Graphics HD Video Card. There is no HDMI port on the laptop but I wanted to purchase a VGA to HDMI cable to connect to my LCD TV but it says the Video Card must support digital signal ouput through the VGA port. Does this particular card support digital signal output? I just want to be sure before I purchase go ahead and purchase the cable.
    Thanks for your help!

    I Got a laptop Satellite L655 for Xmas and I want to use it for my karaoke but I can't get it to work.  I bought a new 15 pin to the RED, YELLOW and WHITE   and S-Video  cord but it won't work.   My Old Laptop had A S-Video on the back and it worked fine.  So how do I get this Laptop hooked up to my TV?   It's an older TV but it has the red,yellow, white,   and the S-video  hook ups. Please any help on this?   Yelsi
    brad wrote:
    Maybe something like this would work.
    http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011404&p_id=4629&seq=1&for...
    Audio would be stereo taken from the headphone port via a seperate cable to the converter box. It doesn't look like that machine has digital audio out, so no surround or whatever is possible.

  • Will not send to printer (Toshiba Satellite P875-S7102)

    Just bought a new Toshiba Satellite laptop (with Windows 8) to replace my HP craptop that died. This is the first Toshiba I've bought and I am already beginning to regret it  
    I figured out how to install the driver for my HP printer and am trying to print to it wirelessly - it shows it is the default printer, but it will not print to it. I get a little pop-up message saying there was an error, but it will not tell me what the heck it is.
    It did the same when trying to print to PDF using Acrobat 8 Pro - and I just thought it may be an incompatibility problem between programs (although I could do other things in Acrobat).
    Now I am wondering if it's just a printer related issue.
    How can I fix? I am not that savvy when it comes to this kind of thing. Just very frustrated - may have to just go and get a refund and bag any further experience with Toshiba. Tired of crying over trying to get this darned thing to work!

    Try again. This time disconnect the HP printer and then remove the printer from the laptop settings. Reboot. On most HP printers it will have you install the HP driver software BEFORE you attach the printer. During the installation it will ask that you attach the USB cable between the printer and computer. Do it. Allow the two devices to handshake and trade settings. Afterwards you should be able to disconnect the printer from the computer and do the necessary settings for the wireless connection. The HP printer should be able to get an IP address and Subnet Mask from the wireless router and allow your Toshiba or any other computer on the network to connect to the printer and print.
    If all this fails, contact the HP website. It has a lot more information and drivers then anything you'll find from Toshiba.

  • Satellite P200/300 - Second HDD bay has no connector!

    I became happy when i noticed 2nd hdd bay. But There's no sata connector available! Just some solders on the mainboard.
    If i solder a SATA CONNECTOR just like this;
    http://cgi.ebay.com/HP-Pavilion-DV6000-DV9000-SATA-Hard-Drive-Connector-26_W0QQitemZ140328066185QQcmdZViewItemQQptZPCC_Dri ves_Storage_Internal?hash=item20ac345c89&_trksid=p 3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1 205|293%3A1|294%3A50
    it will work or not?

    Hi
    >I became happy when i noticed 2nd hdd bay. But there's no sata connector available!
    This is a little bit confused am I right? ;)
    The point is that not all P200 can be upgraded with the second HDD even if the second HDD bay is available.
    The different P200 are equipped with different motherboards and not all are mobos supports 2 HDD controllers
    Your notebook seems to be equipped with the motherboard which supports only one HDD controller.

  • Mac mini second hdd question

    I want to add a second hdd in my 2012 Mac mini and use it as my primary system hdd. I want to keep the current drive in it and use it as additional storage. Can I install the new drive and restore from TM to the new drive and then reformat old hdd after the restore? That would mean I would have two identical drives both with OSX installed at one point. Does anyone know if that will work? Is there another step I should do? Or is it not possible at all. Trying to open up the Mac only once.
    Thanks! Any help is appreciated.

    So install the new drive, clone the old drive to the new drive, restart and boot from new drive, the  reformat old drive. Correct? I don't know how to boot from a specific drive but I'm sure I can figure it out. Then it will always boot from that drive?
    Thanks for the response!

  • Adding second HDD questions

    I see this in the manual--
    Supports the following double hard drive
    configurations:
    ● 2 TB: (1 TB, 5400 rpm, 12.5 mm × 2)
    ● 1500 GB: (750 GB, 7200 rpm, 9.5 mm × 2)
    ● 1500 GB: (750 GB, 5400 rpm, 9.5 mm × 2)
    ● 1 TB: (500 GB, 5400 rpm, 9.5 mm × 2)
    Does that mean that if I have a 750 gb 5400 rpm drive that it will only support another exact same drive? or can I add a 1tb drive @ 7200 rpm for second drive? Thanks!!
    This question was solved.
    View Solution.

    Hi,
    Yes, you can add a 1Tb 7200rpm HDD in the second drive bay.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Toshiba Satellite P875-S7200 not booting/dark monitor

    Hello, This is about my wife's laptop. A while ago the laptop was black when switched on. Nothing to be seen on the monitor. The sounds of the fan and harddisk could indicate some activity, and after a while we could hit the enter button and hear that some more happened. But since the monitor was black we had no idea what happened.The only thing we could do was forcing it to shut down by holding the on button in for so many seconds. Switch it on again, and the same thing happend. After like 10 or whatever times of switching on and off it suddenly booted normally.Everything fine, and the computer could be used as normal.Next time my wife wanted to use it, it was also normal but suddenly one day the monitor was black again. On and off many times, finaly it boorted up normally.This has been going on for a few months, until a while ago it was impossible to boot it. And, now the sort of "normal" sounds has become not so normal. The harddisk does not work and spin like before, and the fan acts up different. I went on this website, and typed in the serial number and model number or whatever it was and was taken through a troubleshooting, removing battery, holding in the on button for more than 20 seconds, I think I held it in for a minute. Connect to power supply but no battery and try to boot... well, I guess you folks have gone through all that yourself.Then I took out the memory, this one has 6 GB, and I tried to use only one memory card, no difference, and I tried the 4GB memory car where the 2GB had been, and vice versa, and the 2GB card where the 4 had been and only that, but no difference.Then I took out the harddisk and put it in my own laptpo, which is an older ASUS, and the computer booted up but came to a point where it said that it had to do some adjustments since the hardware of the ASUS was not the same as in the Toshiba. At that point I stopped because I did not want to mess up the drive and windows setup. But, at least it seemed to work fine up to that point. We have also tried to hook up the computer to the TV with the HDMI cable, and push F4 I think it is to switch from the laptop monitor to something else. The TV is as black and lifeless as the laptop monitor. So, I have been thinking it must be a problem with the motherboard. Sadly we do not have another monitor to try, and we do not have any other memory to try, and well, that is how it is. Do you guys think it is fair to say it is the motherboard ?  The computer warranty is out years ago, and I have taken the hole thing apart today and have tried to look for a new motherboard for the thing. Or, can it be something else ? Thank you in advance for any help. The computer has been rather little used so it looks new and it is sad to just dump it. Best regards,  Bill 

    Well, it has gone some time now, and here is what has happened since I initially asked my question. I got in touch with Toshiba online chat here on this website, and talked to a technician and here is what came out of it.I suspected before I talked to the person that it was the motherboard, and not the monitor, and from what I understand, if the computer has an HDMI outlet, and you connect it to another monitor or a tv that works as a monitor and nothing shows there, it is not the laptop monitor, but the motherboard. From what I understand, the HDMI is supposed to come out with a signal no matter what as long as the motherboard is ok. In my case the HDMI was black too, and well, I guess it could have been a case where both the motherboard and monitor was faulty, but at least the motherboard was faulty. The person did not advice me to do anything with it, but buy a new computer.Well, my wife liked her computer very much, and was a little disappointed the computer was dead after fairly little use even if it was some year sold.In addition she went to Staples and bought a brand new Toshiba, and it had a funky keyboard that did not feel good to type on, and the upper part of the screen was darker than the rest. Like if the background light was gone on the upper part, or not completely gone but partly.So, two Toshibas not being up to par, well, my wife would most likely not buy a Toshiba anymore even if it has been her favorite brand for many years, so I wanted to make her happy, and bought a new motherboard, installed it, and the computer came back up and is running fine. The only little minus is that the Welcome message in the beginning is gone, so no "TOSHIBA" over the screen before Windows comes on, and no way of getting into BIOS. I have no idea how to fix that, but at least the computer runs like a champ, and is as good as ever before, and this motherboard has sockets for 2 more memory cards, if she for some reason wants to upgrade. It went fine in the end, and the price was not so bad, only 157 dollars. So, it seems my wife is saved as a continuing customer of Toshiba products. I just hate it when she gets disappointed, so sad to see the suffering.  Best regards,  Bill 

  • Toshiba Satellite L645D S4036 recovery disk question AND ASKING ADVISE

    long story-LAPTOP DROPED,MONITOR CRACKED,WOULD NOT BOOT PROPERLY.I PURCHASED RECOVERY MEDIA FROM TOSHIBA.3RD DISK WOULD GIVE ERROR.I CALLED TOSHIBA,THEY TOLD ME BAD HARD DRIVE .I REPLACED AND LOADED RECOVERY DISC,SAME MESSAGE MISSING FILES OR CORRUPT.
    I TRIED LOADING VISTA AND HAD IT WORKING SLOWLY-MISSING LAN DRIVER,SO I MANAGED TO SLIP IN NEW BIOS,WENT FROM 1.50 TO 2.20.THEN EVERY THING DISAPPEARED,VISTA STOP WORKING.
    I NEED SOMEONE HELP IF YOU HAVE THETIME,MY STUBORNESS IS GETTING THE BEST OF ME.I AM ABOUT TO PURCHASE ANOTHER RECOVERY DISK AND SEE IF IT WILL WORK,BELIEVING THE OTHER RECOVERY WAS BAD.AND HOPING UPDATING BIOS WILL NOT BE A PROBLEM .THANKS

    Satellite L650-07U (PSK1EC-07U00Q)
    This site is for US computers. I doubt you'll get your questions for that Canadian model answered here.
    There appear to be two recovery partitions. Maybe one for 32- and one for 64-bit Windows. Or maybe one is for English and the other for French.
    Your User's Manual isn't much help either. You probably need to ask Toshiba tech support in Canada.
    About all I have to offer is this: Be wary of drives with advanced-format technology. See my message about that.
    -Jerry

  • Satellite L670-1CN - Second HDD possible?

    Hi,
    is it possible to add a second hard drive on the L670-1CN ? I would like to buy a laptop which has this feature to put a ssd in a second bay.
    Thank you for your help.

    I called toshiba support which confirmed me there was a possibility to add a second hard drive, I ask a confirmation and ask if the connectors were available and the support confirmed all of that for the entiere L670 serie.
    So I bought the laptop on a web site, received it this morning. I checked the availability of this slot, which does not exist...
    Thanks Toshiba support... What a pity...
    I will send back the laptop and look for another laptop (and another brand I think)
    So... problem is solved :-)

  • Toshiba Satellite P505D-S893​5 - Memory Question

    I am having a problem with several programs running in the background when I have Firefox running with about three or four tabs open.  It seems as if I don't have enough memory (I think) to run photo-editing software like Photoshop.  How can I increase memory to handle these?  This laptop appeared to be loaded with memory when I first looked at it, but now I'm thinking it can't handle what I need to do.  After re-reading the specs, it says "This elegant laptop computer out performs even the most powerful desktops, thanks to its 2.2-GHz AMD Turion Xs Dual-Core Mobil Processor RM 74 (1MB L2 Cache), 4GB of DDR2 800MHz memor (expandable to 8GB), and a huge 400GB 5400RPM SATA hard drive."
    What do I need to purchase to keep my laptop from freezing, lagging videos/audio when view on different websites, inability to control my external mouse (it jumps all over the place) and to run multiple photo-editing software applications at the same time?
    Thanks in advance for any help or suggestions.

    Upping the ram to 8gigs will run you about $400 to $500 bucks (4gig sticks are rather expensive).  If it was me I would look into optimizing the system rather than adding more ram.  Make sure all of your drivers are up to date, run a chkdsk/r on your hard drive to make sure there are any problems there.  Clear out all of the temp files that just waste space.  Also check out BlackViper's website to see what services you can safely run without to increase performance. 
    I'm sure that Jerry_Lippey will be along eventually and add his very knowledgable ideas on this subject.  He's our resident Windows Guru.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Satellite P300-01S: Second HDD cover will not fit back on

    Hi,
    I have a P300-01S (Canada). There is a second drive bay, including the sata/power connectors.
    I've installed a second hard drive (64gb SSD), and it works just fine.
    However, the cover for the drive bay will not fit back on. The cover has 5 pegs that prevent it from being put back on if a drive is in the bay. I believe the pegs are there to provide support to the cover when no drive is in there.
    I see no way to remove these other then to snap them off. Any ideas?
    These are not the normal tabs on the edges that are used to hold the cover in place, these are 1/2" long cylindrical pegs in the middle of the drive bay cover.

    I would hav preferred not to cut anything either, but I couldn't find a part# online to order a cover without the pegs. I am sure there are some P300's (maybe Satelitte Pro P300's) out there that do list the 2nd drive bay as a feature, so they must have a cover without those pegs, but I couldn't find it.
    It's working, pegs are cut off so the door fits on now. SSD is working well too.

  • Installed New hard drive in Toshiba P875-s7310

    A couple of weeks ago my hard drive went out in my toshiba satellite P875-S7310. I did not make recovery disk so i order the recovery media usb from Toshiba. I have installed a new hard drive and have tried to boot up the laptop to the bios so i can install everything from the usb onto the new hard drive. I have tried f2, f12, and holding the 0 bottom. Nothing has worked. What else can i do? I want to fix this laptop and do not know what else to do. PLEASE HELP!!

    Satellite P875-S7310
    If Eagle's instructions don't help, reset the machine and try again.
       How-To: Performing a power cycle on a Toshiba laptop
    The instructions attached should have come with your flash drive.
    According to the spec above, once you've restore the hard disk to its original out-of-the-box contents you'll have Windows 8. Follow these instructions to upgrade to Windows 8.1.
       How to Update from Windows 8 to Windows 8.1
    -Jerry
    Attachments:
    ToshibaInstructionsForFlashDriveWin8Recovery.jpg ‏138 KB

Maybe you are looking for

  • How to get new and old value in an alert?

    Hi, I created one event alert in Oracle Apps on PER_ALL_PEOPLE_F table.My intention is to execute the concurrent program attached to the alert when the user changes last_name fileld of that table.How can i get the :new.last_name and :old.last_name in

  • Very, very strange problem with iPod Touch. Won't play in my car.

    I'd understand if I just plugged my iPod Touch into my car and it didn't work. That could mean it's simply not compatiable with my head unit, it could mean the head unit isn't up to date enough for it. However, the first couple of times I plugged my

  • Project management qns

    MODERATOR:  All points have been UNASSIGNED and the thread LOCKED.  Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums.  If you have some information, please consider posting it

  • Problems with audio line out jack

    When I connect the headphones in the audio line out inmediately change to "Digital out" and I don´t listen nothing, but when the headphones is unplugged I hear the music through the internal speakers normally. What can I do about?  Thanks.

  • 10g forms and report over citrix

    hi, is citrix meta frame certified by oracle for 10g AS delivery over ICA? kindly advise how 10g AS works on top of citrix, my customer wants only citrix. thanks