Toshiba Satellite Pro A60 Celeron 2.8GHz 256MB sound volume?

Hi,
I've recently bought a Toshiba Satellite Pro A60 and am happy with item, but despite turning the volume full music and even the windows event sounds are very quiet? To me it does seem to be significantly quieter that other notepads I've used. Is this the way the item should be working or could it be a possible issue?
Thanks for any help or advise you can give.

Hi again
Do you have this problem using all players or just using DVD player? Is this situation since you bought notebook or it occur later? Everything is possible but I dont think that something is faulty.
At the end you can contact Service partner and let them check it up.

Similar Messages

Satellite Pro A60: External monitor shimmers

I use a Satellite Pro A60 with a second (tft) monitor as a dual display setup. When displaying dark backgrounds or images on the second monitor there is a very noticable horizontal shimmer that moves around on the screen.
I have tested the monitor on another machine and it is fine, so I can only assume there is a problem with the notebook or the ATI graphics card.
If anyone can help me solve this problem I would be very grateful, as it is giving me a headache (literally!).

Hello andy
I use external TFT at home with my Tecra and it works fine. The screen refresh rate for external TFT monitor must be set to 60 Hz. If the problem still persists there must be some other reason for this.
I am pretty sure that non-Toshiba display driver can also be responsible for this issue but I hope that you use Toshiba designed driver for graphic card. You should also try to connect some other TFT or even CRT monitor and check if the same problem persists. If yes it is caused by graphic card and you should contact service partner. It is possible that graphic card must be exchanged.
In my opinion this can not be solved by BIOS or other kind of update.
Good luck!

Not working Satellite Pro A60

When I start up my Satellite Pro A60 I get to the Toshiba screen, then it goes to a blank screen and nothing else happens. I have tried removing the battery, disconnecting from the power outlet to no avail.
I have powered up the laptop and pressed F12 but nothing happens, on the odd occasion after the Toshiba screen, there will be a black screen with the words "Checking boot CD-rom" in the top left corner then nothing else happens.
Does anyone have any suggestions? If so could you please email me at [email protected]
Thanks

I've got the same problem with an a60. In the BIOS, the HDD is recognized, and in the repairsector of the windows xp cd, "chkdsk" shows no errors.
I got the problem after doing a clean installation, which couldn't be finished because the notebook doesn't boot from HDD.
I tried to remove the HDD and power connectors and then reintall it but that shows no result as well.
So, windows can write files to it, read from it but can't boot from it? There has to be a solution.

Satellite Pro A60: Windows XP cannot start missing or corrupt driver isapnp.sys

I have had a Satellite Pro A60 for about 3 years without problems.
Last week the Toshiba in Touch screen developed bleeding vertical lines and I got error message 'Windows XP cannot start because of missing or corrupt driver isapnp.sys'. I have tried using recovery disk but this loads OK but then fails to make any difference. Hard disk appears to work OK as slave to another computer.
Any suggestions wil be much appreciated!
Thanks

Found this Microsoft knowledge base article:
You receive a "Windows could not start because the following file is missing or corrupt: Isapnp.sys" error message at startup
http://support.microsoft.com/kb/315311/EN-US/
May it help

Satellite Pro A60 - HDD not detected by BIOS

Hi to all !!
I've been given a Satellite Pro A60 (PSA65E) , for free ....'cause it has a bug!!! But I would like to fix it and use it.
Problem is that HDD is not recognized by the BIOS. Strange enough, it is possible to format it during initial phase of an OS installation from scratch ( I've tried with Win XP and Win 2000 ), but installations do not proceed further since it will not boot from HD. If I try to install a seccond time, it does find some data already present in the HD and gives warnongs ... meaning that it is also possible to write on the disk.
BIOS screen says : no drive.
CD drive is OK, shown as secondary.
I did also search through the Fora at no avail.
Actions done so far :
* flashed the BIOS , now at 1.90 release
* Replaced the original HD (Toshiba, 40 GB ) with another one known to be good , smaller ( Toshiba as well , 30 GB)
* Tried to pull out CD drive and verified BIOS does recognize it has been removed, and recognized it again when put back in. The same manouvre done with the HD does not change anything in the BIOS screen: it always says 'no drive'.
* Tried with DOS version of Partition Magic : it says 'no drive found'. Same with the backup disks that came with the PC.
* Tried other stuff found in Fora : remove all power sorce, let the PC for several minutes.... opened up and checked for visible problems in the HDD area and so on.
Any suggestion would be be appreciated !!!
Thanks
aurcri

Hi to all!
I've spent some hrs to try to find out what is going on. I surrender. The result stays the same: Satellite Pro 'sees' just non Toshiba HDD's. Toshiba HDD's work fine on other notebooks. Tried also the available Toshiba HDD's on a third unit. The only explanation I can guess of is that Satellite BIOS queries the installed HD something that other notebooks do not, and most of the HD reply as it expects and others ( Toshiba's ) do not.
The most suspected item remains BIOS, IMHO.
Talked also with the guy who handed over the broken Satellite to me: no help... he just stated that he never had a problem since the beginning and then suddenly one morning he could not IPL anymore. Oh well, he got lost with the back up CD's, due to the 'strange' behavior of the problem. Taking into consideration that it was possible to R/W from the HD but not to IPL, it is understandable.
I think we can close this thread, unless somebody from Toshiba Storage Division can shade some light....or the Bios guru, maybe.... it would be nice to know.
Thanks to all for the attention
Aurcri

Satellite Pro A60 - BIOS update without OS

I have an Satellite Pro A60, trying to install XP pro but says it needs update BIOS, have downloaded new upgrade, unzipped and only one file there, will not boot as no bootable file.
There currently is no OS on the laptop, I understand i need an ISO file but where is it..!!..

Hi vespec,
I think PinkPanther has already read the thread and you should take the time to to read his posting too.
As he wrote, the BIOS update is Windows based. That means you have to install Windows firstly before you can start the update. If you unzip the files, they will not boot because they are not bootable. You cant start the update without Windows.
Last but not least as PinkPanther wrote, a DOS based update that you can boot from, is only available for ASPs I think.
But it would be interesting to know which error message you get exactly while installing XP. I cant imagine that BIOS update is necessary to install the OS. BIOS has nothing to do with that
And have you tried to install the OS from Toshiba recovery disk? This should work properly because it contains an image of factory settings.

During BIOS update Satellite Pro A60 went down and hasn't started

Hello everyone,
I have a Satellite Pro A60 and I updated the bios. Halfway the update, my laptop went down and hasn´t started since. All it does is give a couple of beeps (trying to tell me the bios is corrupted, I suppose) and shuts itself off again.
Tried to start with the (~) key pressed down (a tip I got from a friend), but no succes.
I currently live in a country where there is no Toshiba dealer available and I rather not ship the laptop to have it repaired.
Does anyone know of a way to fix this? Any help would be greatly appreciated.
Thanks

This sounds not good.
If during the POST the BIOS detects a problem it will normally display a visual error message on the monitor explaining what the problem is. However, if a problem is detected before the BIOS initializes the video card or a video card is not present or not detected then the BIOS will play several BEEPS through the speaker to let you know there is a problem.
Depending on the type of the BIOS you have the BIOS may play beeps in a specific pattern to indicate what the problem is, or play the same beep a number of times indicating the problem.
In your case its possible that you have used a wrong BIOS or a wrong BIOS procedure. Both can damage the motherboard.
To prevent such damages and any mistakes Toshiba has published the FAQ document.
How to update the BIOS on most units!
This you should read before doing any BIOS updates!
Unfortunately I dont think that you can solve it yourself. I think you should ask the ASP for help.

Issue Restoring Toshiba Satellite Pro C50-A, Windows 8.1 Pro

The hard drive that came with my laptop was full so i purchased a new hard drive and i was using the system restore disks that came with my laptop to load windows onto the hard drive, it was working fine up until when i put the third disk in and the disk
drive didn't activate and it was stuck on the copying files screen, i left it be for half the day when i went to school and when i got back nothing had changed so i hard restarted it and tried again from disk one. same thing happens it worked fine up until
disk 3 when it just did nothing i had a solid white light (power) and i solid orange light (wifi) and the disk drive light would blink when i inserted the 3rd disk like it was reading it but then it just turned off ( no more light on disk drive)
Please help
Win 8.1 Toshiba Satellite Pro C50 - A

I would suggest you to use some disk checking tool and see if the reading/writing of data is working fine from all the disks.
If its fine then you should talk to Toshiba Support on this.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
If you are talking about the hard drive it works fine, i was running Ubuntu on it before this and i never had a problem, and if you are talking about the actual disks they work fine to i have used them before and they are from manufacturer, but to make sure
i put my old hard drive back in and made a recovery flash disk and its been stuck at 26% for like an hour now...

Upgrading Toshiba Satellite Pro A10 hard drive

Hi
I have a Toshiba Satellite Pro A10. It is an old laptop, but rather than change it, I would like to install a new hard drive. I have previously put in new RAM to this laptop, but I know the Hard drive change is more complex, so I need as much help as I can get
The laptop is running well, but the 20GB HDD is obviously too small. I have an external USB hard drive for multimedia stuff etc, but the main HDD, even with just the Windows XP and other software on it is always near to the 20GB and the time has come to change
I know I can handle the 'hardware' changeover without much problem. I am intending to get a USB enclosure to allow a clone of the old drive to be copied to the new one, so that when I do install it, the only difference to the laptop will be the larger storage capacity on the internal HDD
I have read extensively about the variety of issues and I am still quite confused. The main issues for me seem to be
-Whether the BIOS affects the type of internal HDD I can install
-I am fairly sure the interface I need is ATA-100/IDE. So does this mean I cannot use SATA?
-What size of HDD can I install? Is there a limit?
-Does the current internal HDD have partitions? I am not sure? It is the same as it was when I bought it, so would Toshiba have put a partition on it containing OS or software? I don't know. I have 'recovery discs' but no Specific windows disc, as one did not come with the laptop. So considering this, how do I go about 'cloning' the old drive onto the new, and then installing it 'seamlessly'?
-Do I need specific software for a 'clone'? Otherwise, how do I do it?
-What do I need to look for in a HDD, when buying? Some sellers seem to see potential issues to do with the capacity, others do not. Im confused
So, as I say, all I want, is to get a larger internal HDD and install it without problems. Im willing to do the work involved, but only when Im confident I have all the necessary information and 'boxes ticked'. Otherwise I fear it may be a disaster.
I am not able to afford to buy a new laptop, so all help is very much appreciated
All advice welcome. Also, if you have any questions just ask
Thanks in advance
Jason

Can you provide the COMPLETE model number and the part number for that model? I don't want to give you any incorrect information. The part number would look like this. PSA10U-3V1JG8
But based on what you have stated so far I would say you need an EIDE or ATA hard drive. Due to bios limitations that I am 95% certain will be in place with your model you will be limited to a 120GB or smaller 9.5mm thick 2.5" ATA/EIDE hard drive. I recommend Western Digital Scorpio BLue drives for their combination of price, performance, and reliability.
Once you post the model and part number I can verify this so you can order the correct drive for you system.
Western Digital has a free version of Acronis True Image that you can download that you can use to clone your old drive to your new drive if you purchase a WD drive.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Slow start up on Satellite Pro A60

My Satellite Pro A60 EN takes ages to be able to use from inital start up and also when swopping users.
I reckon about 12 minutes before you can use it from switching on.

Hello John
Maybe is time for fresh OS installation. I presume on your system there are many stuff responsible for slow startup. SP A60 has old recovery installation procedure and if you have two partitions copy all important files to second partition. Using recovery media you can install OS on partition C and later have access to all data on partition D.

No Warranty for LCD Pixel dead for a new Laptop Toshiba Satellite Pro L300-EZ1523

Hey,
I bought a Toshiba Satellite Pro L300-EZ1523 Laptop in Oct 2009. In January 2010 My motherboard went dead so I have sent the laptop to the Toshiba Depot Center initially they said they will repair it and send it within 3 - 5 Business day but they took nearly 15 days to ship it back.
Once I have received there is the big surprise. One of the pixel on my screen is dead and I tired calling the Toshiba customer care at 1-800-457-7777 and the transfer the call to Depot center which takes nearly 40 to 50 mins to get an engineer on the call for which we need so much of patients.
Today I requested to transfer the call to the Case Manager and when I told her about the problem she again tells me to call the depot and file a case with them and the UPS for the damage and she also mentioned that there is no warranty covered for the LCD Screen.
But when I shipped the laptop to the Toshiba Depot I don't had any dead pixels. Im tired calling Toshiba can anyone help me out.
Regards,
Prem.

I got problem with my Toshiba tecra A9 laptop. There is thick black line at the corner of LCD, I contacted 2 toshiba service centers but they paased me to the Toshiba support. They said that Toshiba will not pay us for LCD repair and asked me to call toshiba support and ask for their autorisation. I also called toshiba support several times, but they just make me confused. They said randomly some bizzare phrases: the service centers should aks us for autorisation no., LCD did not coverd by warranty, You made a physical damage, contact another service center, we will contact you within this business day...
The reason I have bought Tecra model was that toshiba called it as bussiness class, and offered a 3 years limited warranty!!! But the warranty is a whole fake to cheat with the clients. They even do not care about business and dont understand how our professional life is depends to our laptop. such a shame for them.
They pay some employees to talk with you several hours, just to deny their warranty and don't give you a good service!
I wonder how they calculate the repaire cost of LCD. I already find wensite which offer the LCD just for 95$. There are lots of replacement guide all over internet. I will suggest toshiba that I can service them for LCD replacement for as low as 150$. That would be a good business for me and a big deal for toshiba! At least Toshiba will not loose their clients.
From my side, I will start to aware all student around me at university to never trust Toshiba quality and warranty services and do not risk their professional life with the toshiba product and services! It seems that Dell is going to be the leader in customer services and hence in future market!

Toshiba Satellite Pro A10,Windows XP Service Pack 2

Hi everyone,
I have a "Toshiba Satellite Pro A10: P4-M 2.2 GHz/XP Pro/15" TFT/40 GB/768 MB".
I installed the Windows XP Service pack-2 in my notebook.
After updating to winXP SP2, the only way to start up my comp after putting it in "standby mode" or "hibernation mode" is to witch power off and then start up.
I reinstalled "Toshiba Power Saver" but nothing came of it.
What can i do about it?
Kind regards,
Krasteff

Hi Krasteff
Your problem is difficult. If I had it, I'd try to make the status of the OS as clean as possible.
Try killing as many of the funny SYSTRAY applications as possible - means the small icons in the SYSTRAY. Some of them will not be killed that easily. Don't spend hours trying...
Then also try killing any, as You mentioned, antivirus or other services that are not necessary for the system. Check also that You do not have any USB / PC Card devices attached to the system.
Then try again.
Works better? Then "walk backwards" means try attaching the devices / starting the applications one by one and retry Hibernating. Keep track of what You reconnect/restart so You know what You did last when the system fails to start up again. There You have the cause of the problem and then You also know where to look for the solution.
Hope it helps!
BR Tom

TS3212 I have a problem with running the itunes download on my new toshiba satellite pro laptop,

I have downloaded the iTunes software no problems, but when i come to run it a windows pop up comes up saying,
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact
the application verifier to verify that this is a valid window installer package"
as i mentioned it is a brand new Toshiba satellite pro running windows 7 professional,
any ideas????????????
mark

A lot of people have found this works for them:
Settings/General/Date and Time Turn OFF Set Automatically
Set the date to several years in the future
Try to update again - you will get a different error message
Go back and turn ON Set Automatically

Toshiba Satellite PRO A60DU - CPU Features Disable execute bit - Firmware updates?

Hello everyone,
I have a problem with a laptop that i've recently gotten. It's a rather old model Toshiba Satellite PRO A60DU / Model #: PSA65E- 01K033DU.
I wanted to install a new operating system on the laptop (the latest Ubuntu desktop version) and after going through the entire setup, and reboot. I got into the front screen for login and it was giving me the following errors.
Your CPU appears to be lacking expected security protections. Please check your BIOS settings or for more information run: /usr/bin/check-bios-nx --verbose
0 packages can be updated.
0 updates are security updates.
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
tjuky@tjuky-laptop:~$ /usr/bin/check-bios-nx --verbose
This CPU is family 15,model 4, and has NX capabilities but is unable to use these protective features because the BIOS is configured to disable the capability. Please enable this in your BIOS for more details, see: https://wiki.ubuntu.com/Security/CPUFeatures
After a bit of research i figured out that i had to change the NX settings of my device by going into the setup... and according to all the data that i've found out it's suppose to have the options yet it isn't anywhere in there yet.
So i reckon a Firmware update would do the trick. However, wherever i look i can't find any firmware updates. So my ultimate questions are;
1) Is it possible for me to change the NX settings in a way without upgrading my firmware?
2)Are there any actual firmware upgrades for the device? and so yes, where can i find them?
I'm quite desperate as you can see, i hope someone is able to help me.
Kind regards,
Chuck Smits

Hello everyone,
I have a problem with a laptop that i've recently gotten. It's a rather old model Toshiba Satellite PRO A60DU / Model #: PSA65E- 01K033DU.
I wanted to install a new operating system on the laptop (the latest Ubuntu desktop version) and after going through the entire setup, and reboot. I got into the front screen for login and it was giving me the following errors.
Your CPU appears to be lacking expected security protections. Please check your BIOS settings or for more information run: /usr/bin/check-bios-nx --verbose
0 packages can be updated.
0 updates are security updates.
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
tjuky@tjuky-laptop:~$ /usr/bin/check-bios-nx --verbose
This CPU is family 15,model 4, and has NX capabilities but is unable to use these protective features because the BIOS is configured to disable the capability. Please enable this in your BIOS for more details, see: https://wiki.ubuntu.com/Security/CPUFeatures
After a bit of research i figured out that i had to change the NX settings of my device by going into the setup... and according to all the data that i've found out it's suppose to have the options yet it isn't anywhere in there yet.
So i reckon a Firmware update would do the trick. However, wherever i look i can't find any firmware updates. So my ultimate questions are;
1) Is it possible for me to change the NX settings in a way without upgrading my firmware?
2)Are there any actual firmware upgrades for the device? and so yes, where can i find them?
I'm quite desperate as you can see, i hope someone is able to help me.
Kind regards,
Chuck Smits

Toshiba Satellite Pro A100 PSAAPE Need Device Drivers

Hi, I was wondering if anyone may be able to help. My father has been given a Toshiba Satellite Pro A100 (Model Num PSAAPE-00T00KEN) that someone has tried to do a fresh install of windows XP Professional sp2 on. The problem is all the device drivers have been written over and there is no driver disc with the laptop. After looking on the Toshiba website I'm having trouble locating the drivers for this exact model. Could anyone point me in the direction of said drivers or a link to them and also in what order I should download them.
Thanks for you help, Mick

Satellite Pro A100-03R (PSAAPE-00T00KEN)
Mick, the Toshiba drivers and utilities for that European model are here.
Be sure to follow the order of installation recommended.
Installation Instructions for Windows XP
-Jerry

Toshiba Satellite Pro A60 Celeron 2.8GHz 256MB sound volume?

Similar Messages

Maybe you are looking for