Toshiba Satellite pro sp6000 startup issues

Hi There,
I've been having problems with my sp6000 - it refuses to turn on most of the time. 1 in every 100 tries it might turn like nothing was ever wrong. Normally though, the green light turns on for less than second and then disappears.
I have a feeling it MAYBE to do with the cdr/dvd combo drive - as it responds differently when this is removed, tho I havent got another drive at hand to test this theroy.
Thanks for any help,
Toby

Hi Toby
If You suspect the optical drive is the problem of your machine, simply plug it out and try start without it. That is supposed to work just fine.
Good luck
Tom

Similar Messages

Issue Restoring Toshiba Satellite Pro C50-A, Windows 8.1 Pro

The hard drive that came with my laptop was full so i purchased a new hard drive and i was using the system restore disks that came with my laptop to load windows onto the hard drive, it was working fine up until when i put the third disk in and the disk
drive didn't activate and it was stuck on the copying files screen, i left it be for half the day when i went to school and when i got back nothing had changed so i hard restarted it and tried again from disk one. same thing happens it worked fine up until
disk 3 when it just did nothing i had a solid white light (power) and i solid orange light (wifi) and the disk drive light would blink when i inserted the 3rd disk like it was reading it but then it just turned off ( no more light on disk drive)
Please help
Win 8.1 Toshiba Satellite Pro C50 - A

I would suggest you to use some disk checking tool and see if the reading/writing of data is working fine from all the disks.
If its fine then you should talk to Toshiba Support on this.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
If you are talking about the hard drive it works fine, i was running Ubuntu on it before this and i never had a problem, and if you are talking about the actual disks they work fine to i have used them before and they are from manufacturer, but to make sure
i put my old hard drive back in and made a recovery flash disk and its been stuck at 26% for like an hour now...

Upgrading Toshiba Satellite Pro A10 hard drive

Hi
I have a Toshiba Satellite Pro A10. It is an old laptop, but rather than change it, I would like to install a new hard drive. I have previously put in new RAM to this laptop, but I know the Hard drive change is more complex, so I need as much help as I can get
The laptop is running well, but the 20GB HDD is obviously too small. I have an external USB hard drive for multimedia stuff etc, but the main HDD, even with just the Windows XP and other software on it is always near to the 20GB and the time has come to change
I know I can handle the 'hardware' changeover without much problem. I am intending to get a USB enclosure to allow a clone of the old drive to be copied to the new one, so that when I do install it, the only difference to the laptop will be the larger storage capacity on the internal HDD
I have read extensively about the variety of issues and I am still quite confused. The main issues for me seem to be
-Whether the BIOS affects the type of internal HDD I can install
-I am fairly sure the interface I need is ATA-100/IDE. So does this mean I cannot use SATA?
-What size of HDD can I install? Is there a limit?
-Does the current internal HDD have partitions? I am not sure? It is the same as it was when I bought it, so would Toshiba have put a partition on it containing OS or software? I don't know. I have 'recovery discs' but no Specific windows disc, as one did not come with the laptop. So considering this, how do I go about 'cloning' the old drive onto the new, and then installing it 'seamlessly'?
-Do I need specific software for a 'clone'? Otherwise, how do I do it?
-What do I need to look for in a HDD, when buying? Some sellers seem to see potential issues to do with the capacity, others do not. Im confused
So, as I say, all I want, is to get a larger internal HDD and install it without problems. Im willing to do the work involved, but only when Im confident I have all the necessary information and 'boxes ticked'. Otherwise I fear it may be a disaster.
I am not able to afford to buy a new laptop, so all help is very much appreciated
All advice welcome. Also, if you have any questions just ask
Thanks in advance
Jason

Can you provide the COMPLETE model number and the part number for that model? I don't want to give you any incorrect information. The part number would look like this. PSA10U-3V1JG8
But based on what you have stated so far I would say you need an EIDE or ATA hard drive. Due to bios limitations that I am 95% certain will be in place with your model you will be limited to a 120GB or smaller 9.5mm thick 2.5" ATA/EIDE hard drive. I recommend Western Digital Scorpio BLue drives for their combination of price, performance, and reliability.
Once you post the model and part number I can verify this so you can order the correct drive for you system.
Western Digital has a free version of Acronis True Image that you can download that you can use to clone your old drive to your new drive if you purchase a WD drive.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Toshiba Satellite Pro A60 Celeron 2.8GHz 256MB sound volume?

Hi,
I've recently bought a Toshiba Satellite Pro A60 and am happy with item, but despite turning the volume full music and even the windows event sounds are very quiet? To me it does seem to be significantly quieter that other notepads I've used. Is this the way the item should be working or could it be a possible issue?
Thanks for any help or advise you can give.

Hi again
Do you have this problem using all players or just using DVD player? Is this situation since you bought notebook or it occur later? Everything is possible but I dont think that something is faulty.
At the end you can contact Service partner and let them check it up.

No Warranty for LCD Pixel dead for a new Laptop Toshiba Satellite Pro L300-EZ1523

Hey,
I bought a Toshiba Satellite Pro L300-EZ1523 Laptop in Oct 2009. In January 2010 My motherboard went dead so I have sent the laptop to the Toshiba Depot Center initially they said they will repair it and send it within 3 - 5 Business day but they took nearly 15 days to ship it back.
Once I have received there is the big surprise. One of the pixel on my screen is dead and I tired calling the Toshiba customer care at 1-800-457-7777 and the transfer the call to Depot center which takes nearly 40 to 50 mins to get an engineer on the call for which we need so much of patients.
Today I requested to transfer the call to the Case Manager and when I told her about the problem she again tells me to call the depot and file a case with them and the UPS for the damage and she also mentioned that there is no warranty covered for the LCD Screen.
But when I shipped the laptop to the Toshiba Depot I don't had any dead pixels. Im tired calling Toshiba can anyone help me out.
Regards,
Prem.

I got problem with my Toshiba tecra A9 laptop. There is thick black line at the corner of LCD, I contacted 2 toshiba service centers but they paased me to the Toshiba support. They said that Toshiba will not pay us for LCD repair and asked me to call toshiba support and ask for their autorisation. I also called toshiba support several times, but they just make me confused. They said randomly some bizzare phrases: the service centers should aks us for autorisation no., LCD did not coverd by warranty, You made a physical damage, contact another service center, we will contact you within this business day...
The reason I have bought Tecra model was that toshiba called it as bussiness class, and offered a 3 years limited warranty!!! But the warranty is a whole fake to cheat with the clients. They even do not care about business and dont understand how our professional life is depends to our laptop. such a shame for them.
They pay some employees to talk with you several hours, just to deny their warranty and don't give you a good service!
I wonder how they calculate the repaire cost of LCD. I already find wensite which offer the LCD just for 95$. There are lots of replacement guide all over internet. I will suggest toshiba that I can service them for LCD replacement for as low as 150$. That would be a good business for me and a big deal for toshiba! At least Toshiba will not loose their clients.
From my side, I will start to aware all student around me at university to never trust Toshiba quality and warranty services and do not risk their professional life with the toshiba product and services! It seems that Dell is going to be the leader in customer services and hence in future market!

Toshiba Satellite Pro A10,Windows XP Service Pack 2

Hi everyone,
I have a "Toshiba Satellite Pro A10: P4-M 2.2 GHz/XP Pro/15" TFT/40 GB/768 MB".
I installed the Windows XP Service pack-2 in my notebook.
After updating to winXP SP2, the only way to start up my comp after putting it in "standby mode" or "hibernation mode" is to witch power off and then start up.
I reinstalled "Toshiba Power Saver" but nothing came of it.
What can i do about it?
Kind regards,
Krasteff

Hi Krasteff
Your problem is difficult. If I had it, I'd try to make the status of the OS as clean as possible.
Try killing as many of the funny SYSTRAY applications as possible - means the small icons in the SYSTRAY. Some of them will not be killed that easily. Don't spend hours trying...
Then also try killing any, as You mentioned, antivirus or other services that are not necessary for the system. Check also that You do not have any USB / PC Card devices attached to the system.
Then try again.
Works better? Then "walk backwards" means try attaching the devices / starting the applications one by one and retry Hibernating. Keep track of what You reconnect/restart so You know what You did last when the system fails to start up again. There You have the cause of the problem and then You also know where to look for the solution.
Hope it helps!
BR Tom

TS3212 I have a problem with running the itunes download on my new toshiba satellite pro laptop,

I have downloaded the iTunes software no problems, but when i come to run it a windows pop up comes up saying,
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact
the application verifier to verify that this is a valid window installer package"
as i mentioned it is a brand new Toshiba satellite pro running windows 7 professional,
any ideas????????????
mark

A lot of people have found this works for them:
Settings/General/Date and Time Turn OFF Set Automatically
Set the date to several years in the future
Try to update again - you will get a different error message
Go back and turn ON Set Automatically

Toshiba Satellite PRO A60DU - CPU Features Disable execute bit - Firmware updates?

Hello everyone,
I have a problem with a laptop that i've recently gotten. It's a rather old model Toshiba Satellite PRO A60DU / Model #: PSA65E- 01K033DU.
I wanted to install a new operating system on the laptop (the latest Ubuntu desktop version) and after going through the entire setup, and reboot. I got into the front screen for login and it was giving me the following errors.
Your CPU appears to be lacking expected security protections. Please check your BIOS settings or for more information run: /usr/bin/check-bios-nx --verbose
0 packages can be updated.
0 updates are security updates.
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
tjuky@tjuky-laptop:~$ /usr/bin/check-bios-nx --verbose
This CPU is family 15,model 4, and has NX capabilities but is unable to use these protective features because the BIOS is configured to disable the capability. Please enable this in your BIOS for more details, see: https://wiki.ubuntu.com/Security/CPUFeatures
After a bit of research i figured out that i had to change the NX settings of my device by going into the setup... and according to all the data that i've found out it's suppose to have the options yet it isn't anywhere in there yet.
So i reckon a Firmware update would do the trick. However, wherever i look i can't find any firmware updates. So my ultimate questions are;
1) Is it possible for me to change the NX settings in a way without upgrading my firmware?
2)Are there any actual firmware upgrades for the device? and so yes, where can i find them?
I'm quite desperate as you can see, i hope someone is able to help me.
Kind regards,
Chuck Smits

Hello everyone,
I have a problem with a laptop that i've recently gotten. It's a rather old model Toshiba Satellite PRO A60DU / Model #: PSA65E- 01K033DU.
I wanted to install a new operating system on the laptop (the latest Ubuntu desktop version) and after going through the entire setup, and reboot. I got into the front screen for login and it was giving me the following errors.
Your CPU appears to be lacking expected security protections. Please check your BIOS settings or for more information run: /usr/bin/check-bios-nx --verbose
0 packages can be updated.
0 updates are security updates.
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
tjuky@tjuky-laptop:~$ /usr/bin/check-bios-nx --verbose
This CPU is family 15,model 4, and has NX capabilities but is unable to use these protective features because the BIOS is configured to disable the capability. Please enable this in your BIOS for more details, see: https://wiki.ubuntu.com/Security/CPUFeatures
After a bit of research i figured out that i had to change the NX settings of my device by going into the setup... and according to all the data that i've found out it's suppose to have the options yet it isn't anywhere in there yet.
So i reckon a Firmware update would do the trick. However, wherever i look i can't find any firmware updates. So my ultimate questions are;
1) Is it possible for me to change the NX settings in a way without upgrading my firmware?
2)Are there any actual firmware upgrades for the device? and so yes, where can i find them?
I'm quite desperate as you can see, i hope someone is able to help me.
Kind regards,
Chuck Smits

Toshiba Satellite Pro A100 PSAAPE Need Device Drivers

Hi, I was wondering if anyone may be able to help. My father has been given a Toshiba Satellite Pro A100 (Model Num PSAAPE-00T00KEN) that someone has tried to do a fresh install of windows XP Professional sp2 on. The problem is all the device drivers have been written over and there is no driver disc with the laptop. After looking on the Toshiba website I'm having trouble locating the drivers for this exact model. Could anyone point me in the direction of said drivers or a link to them and also in what order I should download them.
Thanks for you help, Mick

Satellite Pro A100-03R (PSAAPE-00T00KEN)
Mick, the Toshiba drivers and utilities for that European model are here.
Be sure to follow the order of installation recommended.
Installation Instructions for Windows XP
-Jerry

Satellite P100-434 startup issue BSOD

Hello everybody!
I have Toshiba Satellite P100-434 laptop and lately I have encountered many problems during the startup.
1. The laptop starts normally up to the writing the password. Then, in the middle of typing BSOD.
2. The laptop gets BSOD or turns off about 2 seconds after the Microsoft bar has appeared.
3. The laptop doesn't turn on - after launch there is only one flash of three blue diodes on the right and the screen stays blank. No Toshiba welcome screen.
After few attempts I succeed with getting the Toshiba welcome screen (it's after the second flash), but there are another issues later, the laptop turns off or tries to Launch Startup Repair. It says only about unspecified error and restores back to the previous state.
4. I tried to enter the Safe Mode, but few times I encountered the same: the laptop turns off after loading some drivers.
BSOD are too short for me to spot what is going on - I spotted only BAD POOL something and IRQL NOT EQUAL something as if it was something with drivers, presumably the NVIDIA display driver. I uninstalled it and downloaded new one and installed it (version 7.15.11.5666). Ths is NVIDIA GeForce Go 7600. Once there was some information about dxgkrnl.sys?
I did Windows Memory Test at startup - no errors.
I scanned for any viruses: my AVG removed some Cryptor virus, but the problem still is there.
The OS is Windows Vista Home Premium SP 2.
I don't know what is the problem. Is it the display driver or any other driver? Or maybe some power related problems? Any advice welcome!

Additional information:
Yesterday I encountered again the same problem: BSOD during typing the password: IRQL NOT LESS OR EQUAL; STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000001, 0x8888E1E3), disk.sys address 8888E1E3 base of 88880000, DateStamp 49e01ef2.
I turned the laptop off manually and after 30 some attempts I succeeded with switching it on again (up to then there was no Toshiba welcome screen and the display remained blank) to meet up with another BSOD shortly after launch of Windows:
STOP 0x0000000A (0x0000000B, 0x000000FF, 0x00000000, 0x8B48F3AD)
The next launch the system made the CHKDSK. There were plenty of index entries being deleted, but there were not bad sectors or anything. When I finally got through all this, I did another diagnostic of the HDD, but it showed no problems.
Anyway: I would like to know whether the problem is hardware or rather software related, because I wouldn't take my laptop to repair if there is something I could do by downloading/reinstalling.

Toshiba Satellite Pro M30 & Power Saver shutdown error

hello!
i am fighting with this problem for months now.. the latest version of power saver on my toshiba sat pro m30 running windows xp with service pack 1 installed gives a message box with an error message on shutdown and i am unable to eliminate this error. unfortunately, i cannot consider re-installing the system from scratch, because there are many other applications installed and i cannot lose settings for them. i've read the forums and realised i am not the first one having problems with toshiba power saver. i am even lucky to have it started successfully at the start-up! yet, it crashes at the shutdown. it's quite annoying. also, i have downloaded all latest updates from this site for my laptop, including even bios update.
i would love to have the opportunity to be able to download the bug-free version of toshiba power saver from this site, and i am sure many other people would appreciate the fixes too!
any feedback on that?
andrew.

hello Quad,
> If your Notebook is properly installed it should work
> well. All delivered software was tested. The only
> reason for your problem can be some additional
> software that you installed later.
my notebook was properly installed and power saver indeed had not been crashing from the very beginning. it started to crash at shutdown after a month of work with my laptop. how can it be that no other application is crashing elsewhere, and only the power saver application does? do you not find it slightly irrelevant to point me again to recovery CD? especially, when i mention that re-installing everything from scratch is not an option for me? moreover, i didn't install anything ultra-specific that loads at startup. in fact, i try to keep my system as clean as possible. no Antivirus, no SP2, no weird background processes.
> It is also possible that it can be caused by some
> Antivirus application. Maybe is some application
> running in background? There are lots of reasons who
> can be responsible for this issue.
there is logic in your words, but as i said, there are no specific applications installed to be running in the background, except ASIO drivers for the external sound interface, but they were working fine from the beginning with power saver. no antivirus installed either.
and please do not refer to your particular configuration as a standard. all configurations become different as time passes from the original installation. :>
regards,
andrew

Toshiba Satellite C855-SS530 touchpad issues: left-click randomly releases

Brand new Toshiba Satellite C855-SS530 Windows 8. My touchpad will very often respond erratically. As I hold down on the left button and scroll, often times scroll will randomly release and then sometimes re-engage. This will happen with web pages, holding windows, etc. I'll be dragging a window or file or what-have-you, it will release the hold of it's own accord (without me releasing the left button) then sometimes re-engage (picking up other random files, selecting stuff on the desktop or other random things I didn't want to do). Most often I am holding down the left button and scrolling down a web page, and it will randomly "let go" of the scroll (before I have let go of the left button). Occassionally the touchpad will not immediately respond. It's too annoying to keep this laptop.
It isn't clear to me whether this is hardware or software related...Could be a bad button, bad touchpad, loose wire, or even a memory-glitch error which disrupts the touchpad signal. Does anyone know if this is a known issue with the Satellite C855-S5350. The touchpad is vital. It can't glitch out even 1% of the time. If I can't solve the issue, it'll likely be returned. I turned off most of the Synaptics silly stuff (edge swipe, etc) and it didn't resolve anything. There are nearly no services running eating up RAM so I have no idea why the touchpad would be freezing up...

You might want to try these suggestions:
The touchpad does not work properly
- Peter

My Toshiba Satellite Pro c660-1N9 not displaying

I was using the laptop this morning and then had to restart it after uninstalling my antivirus software. Upon restart, the screen went black. Not even the backlight comes on but the laptop displays as i can hear the sound windows makes while booting. I put it off and then left it for a while (long enough for it to cool down)and switched it on again. It started normally but upon restart again, it didn't show anything for a while then the screen became very bright and the things displayed were kinda blurred. When i restarted it again, it went back to the black screen. I just bought it about a week ago. Any suggestions as to what i can do to it?

SATELLITE PRO C660-1N9 Specifications
...I just bought it about a week ago. Any suggestions as to what i can do to it?
Three suggestions.
First, try a proper system reset and see if this helps bring the system back. Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you hopefully see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, boot into Windows.
If that doesn't work, try the rest of the steps outlined in this article:
Computer will not turn on
If nothing works there time to return it to where you bought it from.
Let us know what happens. Good luck.
Mike

Satellite Pro C650 - HDD issue - need new one

Satellite Pro C650 Model Number: PSC09A-01V021
Smart Disk reports a unspecified HDD problem & recommends backup (done) & HDD replacement.
It runs so slow it is unusable. Warranty has expired so I wish to replace the HDD myself.
The faulty drive is a Toshiba 320gig MK3265gsxn.
I'm looking at a 500G WD 16M 7200RPM SATA 2.5Inch Scorpio WD5000BPKX as replacement/upgrade.
I assume the new drive will be detected/setup by BIOS but I don't know if the recovery disks will work with this Western Dig, larger & faster drive. Can anyone advise please?
Recovery Disk questions.
When I made the recovery disks using Toshiba Recovery Media Creator the program suggested marking the first few disks as Recovery Disk 1, 2 & so on. I assume these disks are my user data backup. Yes/No?
The last disk made was called Windows Recovery Environment-64bit. This is the factory default backup & is to be installed first?
Will it transfer the Recovery Partition & install Windows on the new disk?
Thanks,
GJL.

Now when you need to exchange HDD I recommend you to exchange it with SSD. It costs a bit more but believe me notebooks performance will be much better. Ive made the same and Im so happy.
Notebook starts faster and operate much better.
Recovery image disc is back-up of original recovery image and it has nothing to do with your personal settings.
When you install it notebook will have factory settings again and it will be identical situation when you have started your notebook for the first time.
In my opinion there should not be any problem to use created discs with new HDD. Generally speaking there is no some limitation and you can use different HDDs.
Anyway, think about SSD.

[FIXED]Toshiba Satellite m45-s359 brightness issue

Hi all.
I recently replaced the screen on my Toshiba Satellite, as it had a large crack in it. Thing is, the new screen is WAY too bright. What was once white is now a blinding light, and what was once pitch black is now a light grey. The battery life has been affected as well.
So far, with this laptop, it's been an uphill battle. The keyboard, although it has a brightness Fn key, hasn't been recognized by any distro I use, much less Arch. So keybindings are out the question. I have laptop-mode-tools installed, but there isn't a "video" folder in "/proc/acpi". The "/sys/class/backlight/" folder is empty as well.
Anything anyone can offer on this problem would be greatly appreciated.
EDIT: I've tried using xbacklight, but I get
xbacklight -set 50
No outputs have backlight property
Last edited by Him (2011-03-05 17:50:30)

Him wrote:...How hard would it be to install it? Just "make" and "make install", or is it a bit more than that?
That is pretty much it. It is a single .c file, a README file, and a Makefile. Let me try to compile it when I get home to see how it goes. I'll tar it up and send you a copy by email to the link in your profile. You will need to compile it for your system. I'm pretty sure a module compiled on my system won't fly on yours.
Edit: No, actually. I recall it is built as a kernel module and was built by slipping it into the kernel tree. Not that tough. I'll throw together some notes.
Last edited by ewaller (2011-03-02 23:06:33)

Toshiba Satellite pro sp6000 startup issues

Similar Messages

Maybe you are looking for