Toshiba Satellite S50-B stuck in Airplane mode with Windows 10
Hi folks, Satellite S50-B has some LAN and WiFi adapter issues with Windows 10. I updated my operating system from Windows 8.1 to Windows 10 today. The transition was smooth, however, my LAN and WiFi adapters were completely dormant and stayed unrecognized by the new OS. The new OS kept showing "Airplane Mode" ON. After spending a couple of hours trying to fix the issues, I decided to return to Windows 8.1. Both the adapters are working fine after reverting back to windows 8.1. P.S. to Toshiba: Can you please fix these issues? D
Yes, it appears your model is on the list. Go HERE and enter your COMPLETE model number as in my examples below, click on Drivers and Updates and select Windows 10 64 bit and you will find all the drivers available for Win 10 for your machine. You can download any you need.
Similar Messages
-
Ipad mini stuck in airplane mode and won't reset
My ipad mini is stuck on airplane mode and I can't take it off. I therefore don't have access to wifi. It keeps asking me to enter my facetime login but I can't do that. It also won't let me reset the phone. Please help, any ideas?
Have you tried a restore in DFU mode? Sometime when a normal restore doesn't work, a DFU restore does the trick.
Entering DFU Mode on iPhone, iPad or iPod touch
Plug your device into your computer with a USB cable.
Turn off the device.
Hold the Power button for 3 seconds.
Hold the Home and Power buttons for 10 seconds.
Release the Power button but keep holding the Home button.
After about 15 seconds you will be alerted by iTunes saying that it has detected a device in Recovery Mode.
Make sure that when it says in iTunes that it is in restore mode that the iPad's screen is blank, that means it's in DFU mode.
Hope it helps -
My Charge is stuck in Airplane mode. I have turned it off then on, removed the battery and also the sd card. Nothing works. I now own a 2 day old $300 paperweight. Would appreciate any advice. Thanks jim
make sure your mobile data is turned on... from the home screen at the top swipe your finger down and the second icon from the left should be illuminated...if not tap the icon and it should turn yellow. You can also go to menu, settings, wireless & networks, scroll down to mobile networks, make sure the checkmarks are lit on use packet data and data roaming. See if that helps
-
My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.
My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)
What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.
-
My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.
My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
My phone is completely disabled, what can i do ?Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808
-
My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?
Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
IPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?
I tried to update to IOS 4.3.4 today but now my iPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?
(With the old discussion groups it was easy to see where other people had similar problems, these new groups seems clunky in comparison)OK, fixed it by using SHIFT+RESTORE to load the iPad1,1_4.3.4_8K2_Restore.ipsw file in directly from the
C:\Documents and Settings\<user name>\Application Data\Apple Computer\iTunes\iPad Software Updates
folder.
No idea why the upgrade to 4.3.3 failed in the first place and no idea why iTunes was not clever enough to just do it by itself when it detected that there was a problem in the first place. -
Pavillion N-15 030us stuck in safe mode with no display
The display is broken and I was using a monitor connected thru the HDMI cable. I restarted the notebook in safe mode which I take it does not enable the HDMI port? So now I am stuck in safe mode with no display.
Hello @LogicMantra,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop is not able to display after booting in safe mode, and I would be happy to assist you in this matter!
To correct this issue, I recommend borrowing an HDMI compatible monitor and updating the drivers for your system this way. If this does not work, please follow this document on Computer Starts but Monitor Remains Blank (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
4s stuck in recovery mode with error 29
The problems started when I changed the battery, now phone is stuck in recovery mode with an error code 29. Ive turned the firewall off and anti virus on my norton security, switched the computer on and off and tried to restore the phone about 6 times now. Has anyone any other ideas please?
That's a hardware problem, most likely cause when you broke something in the process of changing the battery.
http://support.apple.com/kb/ts3694#10
Find a competent 3rd party repair shop or buy a new phone. Apple won't touch that one now that you've opened it. -
My iPod is stuck in recovery mode with a error code 1
my ipod is stuck in recovery mode with a error code 1
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone 5 is stuck in recovery mode with error 14 unknown error coming up each time i try to restore.
Any suggestions?Hi ShinefromOKC,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different Dock Connector or Lightning Connector to USB cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. An incorrectly set default packet size can cause this error. Contact the software manufacturer that installed the packet-size modification for assistance. Or, follow this article by Microsoft to reset the packet size back to the default for Windows:How to reset Internet Protocol (TCP/IP).
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
I hope this information helps ....
Happy Holidays!
- Judy -
Ipod stuck in restore mode with error 1611,HELP
I have a ipod the is stuck in restore mode with an error code of 1611. I have tried everything that is posted. Any other suggestion?
Hey i HAVE/HAD the same problem but right in THIS moment i solved it! And i'm gonna tell you how:
1) You have to uninstall ALL the programs that are from Apple.
2) Go into control panel if you are on a windows and delete everything that says Author (Apple inc.)
3) Here is a list of every thing you have to Uninstall:
Apple application support
Apple mobile device support
Apple software update
Bonjour
iTunes
Quicktime player
Safari
4) After that just go to Apple.com and download the lastest version of iTunes!
5) Install it and sync your iPhone/iPod Touch out of Recovery mode.
i hope that helped you, it sure did to me. bye -
Ipod nano gets stuck in recovery mode in windows xp
My Ipod Nano 7th Generation gets stuck in Recovery Mode in Windows XP. It runs for 3-4 weeks without a problem and then I get prompted that it is in Recovery Mode. It stays in a loop doing this. I've triend uninstalling and reinstalling iTunes but this hasn't fixed the problem. Suggestions??
I one of these programs will not kick the iPod out of recovery mode you will have to restore the iPod.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
You may be able to get some info off the restored iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Satellite A500-14K - USB key not recognized with Windows 7
I have a Toshiba Satellite A500 14K, it was pre-installed for Windows 7.
I have purchased the Windows 7 upgrade: I received one disk for PC upgrade et one disk for windows upgrade. I have launched the first disk, and then the second one.
There was no special error message during these installations.
Since this upgrade, my PC doesn't recognized the USB keys whereas they work perfectly with the previous windows version with this pc .They are normally plug and play usb keys. When I launched the windows update, a driver is found, but the installation failed in error with a message of access problem.
I have check that the firewall doesn't block the access. I have installed the last version of the BIOS
I don't found any similar pb on the forum
thank you for your helpNot BIOS update but chipset utility.
Problem is that this notebook model is not supported for Windows 7 32bit but for 64bit only.
The same chipset is used on Satellite L500 and it is supported for Windows 7 32 bit so you can try to install THIS chipset utility.
Bye -
PC stuck after BIOS logo with Windows 8 Fast boot
PC detail;
MSI Z77A-GD65 (latest bios)
MSI GTX 670 Twin Frozr IV PE OC
- Latest driver from NVIDIA website
- Vbios https://forum-en.msi.com/index.php?topic=170399.msg1244850#msg1244850
- GPU .rom file http://www.mediafire.com/download/eqi6yn5d2bb8vgr/GK104.rom
- S/N: 602-V284-030B1301135790
Windows 8 RTM x64 Untouched Version
After successfull flash vbios for my gpu, and install Windows 8 in UEFI mode with Windows 8 Fast boot mode able in bios,
my PC sometime fail to boot to windows after boot logo, stuck at black screen, monitor do not receive any signal and turn into sleep mode.
This happen only after I install the graphic driver. After uninstalling the graphic driver, my PC can boot smoothly without problem.
Is there any solution for this? Do I need to install certain graphic driver for my gpu? or maybe some other thing I need to do to fix it.
Thanks.Quote from: flobelix on 09-July-13, 03:13:46
Try the older sure working MSI 306.97: http://www.msi.com/service/download/driver-19780.html
Wow, Its work.
Already did many restart and turn on my PC, PC boot to windows smoothly and fast.
Thanks.
But is there no other way to use the latest driver? I wonder if I can get maximum performance without latest driver or not. This driver is already more than half a year old.
Maybe you are looking for
-
ERROR WHILE USING SO_NEW_DOCUMENT_ATT_SEND_API1
An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was not caught in procedure "ENTRY_NEU" "(FORM)", nor was it propagated by a RAISING clause. Since the caller of the pro
-
Screen scrolls up and down / left to right
My wife has the old white glossy 13" macbook. About 4 years old, but with her service contract, has the latest software and all that jazz. Our one year old got to hitting a bunch of keys on her keyboard and disrupted some settings, that we can't figu
-
Hi, Received a pdf by email. When I attempt to open it, I receive the message, "File Error- Couldn't open the file", is there any way I can open it? Thanks, Graham
-
How to Restrict Input Parameter in MD02
Dear Sir, While running In the Tcode MD02 , we are looking for the following requirement : Under MRP Control Parameter , the parameter "Create Purchase Requisition" must have a default value as 3 and it should be grayed-out also so that user is not
-
Just set up my sister in laws new 21.5 iMac and everything is working fine. I'm just a bit concerned because of the way it starts up and shuts down. On startup the screen goes black and a bunch of lines of info go by. The same happens at shut down. I