Toshiba Sattelitte L550D, AMD dual core processor M520, Firefox 3.6 works fine; any later version produces only server not fond for any URL; any one have a fix?

Forgot to mention op system is Windows 7 64 bit; 4 gig memory and a 320 gig 5400 rpm (slow) SATA drive. Have tried Pale Moon with the same result although its site shows the AMD Turion II dual core processor as supported

Yes, the question was poster from my desktop machine which is set to dual boot both windows 7 and Xp. I regularly run spybot scans but I'll try all the others you mentioned.
Thanks

Similar Messages

  • Unexpected reboot during simulation using multisim on AMD dual core processor

    We are using NI-multisim 10 in a classroom environment and are experiencing sudden reboots during simulation without giving any error or warning. This happens on multiple machines, all being Dell Optiplex 740 with AMD DC 2Ghz as processor. Since these problems happen so frequently, making  teaching quite impossible, we have shifted PC-room and are now using older machines. On these machines - Dell GX280 using intell P4HT-2,8 Ghz - we experience no more problems.
    Is this reboot problem related to the article :  Unexpected Errors with DAQ Device on AMD Dual Core Machine  (http://digital.ni.com/public.nsf/allkb/9CE22FE099A​FB8BF862572FF007A5D45) and what do we have to do to fix this problem?

    Nic
    Can you verify your driver versions? Make sure that you are running the latest versions of NI drivers to ensure proper compatibility. If possible, you might try upgrading to multisim 11. If this does not solve the issue, try the single processor workaround in outlined in the following KB:
    http://digital.ni.com/public.nsf/allkb/D0FC3BE7D9F​331398625731A005D76B8?OpenDocument
    Altough it is surely decreasing the performance of the system, certain cases have shown that there is no other possible workaround unfortunately.
    Best Regards
    Michiel
    Applications Engineer
    NI Belgium
    http://www.ni.com/ask

  • AMD Dual Core Processor - Problem between tracks

    I am running iTunes on a dual core AMD Athlon processor and notice strange behavior on the computer. When iTunes moves from one track to the next, it sounds like it is playing the end of the first track at the same time as the beginning of the second track. The same mp3 files play perfectly when downloaded to the iPod.
    My theory is that iTunes is using only one processor on each file (track) but can switch to the other processor for the next track. Since they are asynchronous, they end up overlapping during the transition.
    BTW - latest drivers, including the May '06 AMD driver are installed.

    There's no need to worry, it's just a neat little feature, not a hardware issue. Some people like it.
    In iTunes, go to the Playback prefereences (Edit>Preferences>Playback tab) and make sure "Crossfade Playback" is deselected.

  • Can you down load itunes to amd athlon(tm) 64 x2 dual core processor 3800

    Can you download itunes to a computer with amd athlon(tm) 64 x2 dual core processor 3800+

    Can you download itunes to a computer with amd athlon(tm) 64 x2 dual core processor 3800+

  • Using the 2nd of a dual core processor

    I have a dual core processor laptop and currently it isn't using the 2nd one at the moment. The first one is full and I am getting messages saying I have no memory space. How can I use the 2nd processor?

    We need to know your full model number, like Satellite A215-S7437, and your Part Number, like PSAFGU-00L002.  You can find this information on the Toshiba label on the bottom of your computer. Also, we need your operating system version, like Windows 7 32bit.
    In addition, give us the exact error message that you are getting. Do not paraphrase, spelling and syntax are important. A screen shot of the error message would be best.
    However, I would mention that your processor(s), your available system RAM (Random Access Memory), and the available space on your HDD (Hard Disk Drive), are three completely different things.
    Mike

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • After downloading and running program to install keeps saying file is corrupt. I have used this on computer before and had crash and am trying to reinstall. Have 2.? gh dual core processor with 4megs ram and a 320 gb hard drive using windows 7 64bit.

    After downloading and telling program to run it will not open the firefox install utility keeps saying file is corrupt. I had a computer crash and having to reinstall all of my programs. I have a 2.? Gh dual core processor running windows 7 64bit, which I had before, with 4 megs ram and a 320 gb hard drive so I know I have the system requirements.
    == This happened ==
    Every time Firefox opened
    == today 5/24/10 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
    See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

  • Parallelism in oracle using only one dual-core processor

    Hi, is usefull or could i use parallel execution in oracle using only one dual core processor?
    Can someone explain me why?

    Hi
    To take advantage of parallel processing you need enough resources (mainly CPU and I/O). If you run serially and the bottleneck is the CPU, then parallel processing might help. On the contrary, if the bottleneck is located in the I/O sub-system, throwing more CPU to it would not make things better. So, it's a question of balance between the CPU and I/O resources you have.
    HTH
    Chris

  • How to use Real time execution trace toolkit with Dual-core processor??

    hi there
    the situation as follows:
    i have a computer (PC and Laptop) types with Dual-core processors, and am trying to do simulation using Multi-core technology and based on different simulation scenarios...starting from sequantial processing,.......Piple lining processing strategy. so that i can differentiate the time delay between those types of processing based on (Using 1 processor then dual-core processor Computers)
    my question is: As i read through Ni's white papers i saw many notes refer to Real-time execution trace toolkit to investigate the (processing-time , etc) of multi-core processors in processing diffenent algorithms. My algorithms are to be run on 1 computer with dual-core processor BUT, not in real time environments, that is ( No hardware to be connected to my pc) only algorithms running on my pc....
    So, is it possible to use Real time execution trace toolkit  or anyother tools in LabVIEW to show processing-delays and/or anyother timing critical issues without using my application for  real- time hardware.???
    in other words: how to use Real time execution trace toolkit  in non-hardware and/or real-time scenarios???
    please help me in this.
    Any suggestion, comments, feedback.....is absolutely highly appreciated
    thanks a lot in advance
    Labview Lover

    Hey,
    The Realtime Execution Trace Toolkit only works for NI RT Targets.
    But you can use the Desktop Execution Trace Toolkit, just search for it under ni.com.
    Christian

  • Labview 7.1 and Dual Core Processors

    Hi,
    I was wondering if anyone has encountered any problems using Labview
    7.1 and the newer dual-core processors. I have a Dell Dimension DXPO51,
    2.8 GHz Pentium D with 1 GB ram. There is NO virus software or any
    other non-essential programs running in the background. The computer is
    totally dedicated to controlling a machine.
    Other NI boards installed: PCI-6221 for analog inputs, PCI-6602 for
    reading encoders, PCI-7352 Motion Control board to control 2 motors.
    The problem:
    Periodically when I start my program, it locks up and I get the "Tell
    Microsoft about this problem..." screen. After it exits out of Labview
    and I restart, the Run arrow is not broken but the program will not run
    until I make a change on the block diagram. Then I can run again.
    Doesn't happen all the time, doesn't happen after running after a
    certain amount of time, doesn't happen after a particular change is
    made (i.e. adding case statements, adding an event, etc.). In other
    words, totally random.
    I have tried totally uninstalling ALL National Instruments software,
    including cleaning the registry, and re-installing everything. Didn't
    help.
    The machine will be shipping with the executable file only but I'm still leary of problems arising due to this issue.
    Any help or suggestions of things to try would be appreciated.
    Thanks,
    Teri

    Hi Teri,
    I've seen scattered reports of users having trouble with dual-processor
    machines with earlier versions of LabVIEW, though I'm not aware of
    verified solutions in those cases.  The dual-processor operation
    should be completely transparent to LabVIEW, although I know XP has had
    some difficulties in providing the abstraction correctly.  A
    workaround that has been successful in the past is to set the processor
    affinity for LabVIEW to a single processor.  This should eliminate
    the dual-processor nature of the system from consideration.  If
    the problem still recurs after that, then the issue stems from another
    source and we can investigate further.  Does it show this behavior
    with any program (or just by opening the LabVIEW environment)? 
    How often does this occur (10%, 50% of the time)?
    Cheers,
    Matt Pollock
    National Instruments

  • Uneven Core usage on dual core processor

    Hi there
    I noticed today whilst doing some video encoding (.TS files to .MP4) that my Mac Mini is not spreading the load over both of the cores in my dual core processor. Whilst Core 1 is showing nearly 100% Core 2 is hardly being used. Also I noticed that when the load on Core 1 dips then Core 2 will peak but as soon as the load goes back to Core 1 it will equally dip on Core 2 so essentially in Activity Monitor it looks like the core usage is a negative image of each other. The total CPU usage never peaked above 54%.
    Could this an indication of a failing CPU or is it a case of poor core management? The software I've been using is VLC Player and also iMagiConverter.
    Cheers
    Jonty

    What I don't understand is why software developers make software (especially video encoding that is all about CPU number crunching) that only utilises 50% of the CPU resources!
    There are any number of possible reasons, from an application using a cross-platform code base that doesn't lend itself well to mulitiprocessor optimization for a particular platform, to inexperienced programmers who don't well understand programming for parallel threads, to developers who just want to crank out an application as quickly as they can (iMagiConverter seems to sort of fall into that category, given the number of applications of a similar nature that the "company" has produced). You'd have to get involved in the project development to know for sure.
    Regards.

  • Jdeveloper dual core processor performance problem

    I have a dual core 2.4 ghz processor and 2 gig of ram and Im running Jdevloper 9.0.5.2 and my performace is terrible. Other developers in the company have non-dual core processors and they can start up in debug mode using the Jdeveloper embedded oc4j our application in 10 seconds where it takes me 4 min!!!!! It is a struts,ejb web application. Is there anything I can do to help in debug mode??? cheers.
    Murray

    Hi Bernard,
    Which version of McAfee are you using?
    On my (personal) laptop, I'm using McAfee VirusScan 9.0.10. I don't frequently run JDeveloper on this laptop, but when I do, it's not experiencing signficant startup delays (it's a very low power machine: PIII 650 512Mb)
    McAfee VirusScan seems to have very few configuration options (noticably different from Norton, which I use on my corporate desktop machine). I specifically remember changing the "File Types to Scan" option to "Program files and documents only". You can get to this by right clicking the "M" notification area icon, VirusScan->Options menu, Advanced button on the ActiveShield page.
    In Norton, I think I have it configured so that it only scans files on write rather than on read. I also exclude directories which contain jdeveloper installs or other large Java apps (although scanning only on write elliminates most of the performance problems anyway and still leaves your system reasonably secure).
    The easiest way to convince your MIS dept that the virus checker is the source of your problems might be if you ask them to allow you to turn it off in order to test the difference it makes to performance. It's a reasonable request to make if you're trying to elliminate possible causes for the slowdown (from the description you gave, it does sound like the AV upgrade is the first place I'd start looking).
    If the virus checker is the source of your problems, you'll probably be seeing massive slowness in most large Java applications that have a large number of JARs on their classpath.
    Thanks,
    Brian

  • Oracle v.8 go slow on HP G5 Dual Core Processor

    We have a really problem !!!
    I have bayed a new computer HP DL380 G5
    When i install Oracle 8 Server the database access is very slower.
    The same application works fine on HP G2 G3 and G4
    can anybody help me.
    Thanks in advance
    Isidre Tapias
    [email protected]

    The operating system is Windows 2003 sp1
    with the same OS with hardware HP G3 and G4, Oracle v8 works fine.
    It seems that the problem is G5 Dual Core Processors.
    There are any fix o solution for this problem ??
    best regards
    Isidre

  • Turning on Virtualization in Compaq/HP Presario C500 with Dual Core processor

    Hoping someone can help me out.
    Running a Compaq Presario C500 laptop with the Dual Core processor. Intel's site says the processor supports virtualization.
    However, in the F.24 A Phoenix BIOS setup (pressing F10 on Startup), there's no option to turn on Intel Virtualization Technology on any of the Tabs. Tried downgrading the BIOS to F.14A -- as the description says; "Adds item to Setup utility (F10) to enable/disable Intel Processor Virtualization Technology."
    However, when I startup, press F10 -- there's no option for turning this on.
    Is there another place to go -- other than the F10 setup area of the BIOS -- to turn on Virtualization Technology?
    If an expert out there can help, it would be very appreciated!

    http://www.intel.com/p/en_US/support/highlights/processors/toolspiu/?redirector_count=1&
    Did you actually download the identification utility and run the tool?
    Dave
    Did someone help you? Pay it forward. Help someone else.
    NC4400, TC4400 Win 7 Ultimate, xp pro, both dual boot
    a bunch of thinkpads

  • Will Photoshop Elements 10 work on an iMac with an Intel Dual Core processor?

    Will Photoshop Elements 10 work on an iMac with an Intel Dual Core processor?

    Thanks Vikrant.
    I have an iMac with the following:
    Model Name:          iMac
      Model Identifier:          iMac8,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          1 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          IM81.00C1.B00
      SMC Version (system):          1.29f1
    When I insert disc 3 to install it just makes some odd noises and spits the disc out!
    Perversly Disc 1 for Windows it reads...

Maybe you are looking for

  • Set as default value the Item Category in the Maintenance Order

    Hello everyone, We are trying to find a user exit in order to set as default value the item category in the Maintenance Order once the Material has been introduced (Tag Components). SAP Customizing let the user set the Item Category automatically per

  • Web service problem CX_SY_CONVERSION_NO_RAW

    I work with the "CustomerCRMCreateRequestConfirmation_In" in the tool soapUI I used this example to create an new Business Partner: Example how to create a business partner (of type organization/ corporate account) with internal numbering, one addres

  • Brightness and Contrast filter arent working properly

    When I drag the brightness filter to clips in my sequence, for some reason it isn't showing. I can view it (the filter setting) in the properties for the specific clip but the brightness wont change? anyone else having this issue?

  • Urgent Mixed footage query

    Would really appreciate anyones thoughts as to the best option for a DVD I have to output tomorrow, which little chance of time to redo it again or experiment. I have footage that has been shot in 3 formats 1) HDV Z1 50i approx 40% content of 120 min

  • Reports directory

    Hi, is the reports directory or reports noad registered in any table ? In which ? Thank you.