Toshiba SD-R2212 drive read audio CDs only
Hi,
I have a problem with my combo drive Toshiba sd-r2212.
The problem is: my drive only reads audio CDs, not CD-ROMs or DVDs
My firmware version is: 1314.
Anyone could help me with this problem? I didn't find any solution at Google.
Hello
I believe it is an older ODD. Am I right?
Anyway, it is not easy to say what is wrong with this optical disk drive. If I say my car doesnt start why? what you can say? Probably not much without any precise checkup!
I dont know how old is your ODD but there is also possibility that the drive is defective. Usually at first the drive can not read DVDs but CDs. That is typical symptom for defective ODD. The laser calibration doesnt works as before.
Sorry but according to your short posting I can just say: the drive is probably defective and there is no much to do. Replacement is necessary.
Similar Messages
-
10.5.7 Won't Read Audio CDs?
I installed 10.5.7 a couple of days ago. All went well and continues to do so except for 1 minor quirk, none of my audio CDs can be read by the dvd drive, I have managed to burn both CD and DVDs though using toast 8, but I'm unable to read audio CDs new AND old. Anyone one else having trouble with Audio CDs? [DVDs are fine]
Macbook 10.5.7, 4 gig ram 160gig hdFirst, my MBP plays CDs fine, so it's not 10.5.7, at least in my case.
What happens when you insert an audio CD? Does it appear at all on the desktop?
Try a PRAM reset.
AFAIK, the lasers for reading CDs and DVDs are different. CDs use a 700nm laser, DVDs a 640nm.
The lasers for burning are different again.
It's just possible that the CD laser in your drive is not working.
Other than a PRAM reset, I am not sure what you can do. -
My 24" iMac won't read audio cds--ejects them after about 15 seconds
My 24" intel iMac won't read audio cds. It ejects them after about 15 seconds. I have virtually never played cds on this machine in five years. It plays dads with no problem. Anybody have any feedback. I also saw a fix by deleting some presence files.
I saw this on a forum from about four years ago:
Trash the following folders:
com.apple.kernelcaches (from System/Library/Caches
extensions.kextcache (from System/Library
CDInfo.cidb (from Home/Library/Preferences
Restart
Could this be a fix.
Unfortunately, I can't reset PRAM. I've done it a thousand times over twenty years,but my machine simply boots up without the extra chimes. -
My laptop is: HP entertainment model dv7 - 3180us (Windows 7, 64 bits)
The dvdRom-BluRay is not playing andy dvd.
But it still reads Audio CDs
Any solution.Hi,
Try following the procedure under the sub-heading 'Let me fix it myself' on the link below to remove the Upper and Lower filters and see if this helps the issue.
http://support.microsoft.com/kb/982116
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Macbook pro will only read audio cds
My MacBook Pro2,1 17" will no longer read anything other than Audio CDs in its drive. Any other format and it says the CD is empty. It never used to do this. I wonder if upgrading to Mac OS 10.7 (Lion - which is as far as this hardware will go) will fix this problem, or has the firmware gone awry? (What a great pity they don't make 17" laptops anymore.)
This is not related to my CD problems, for which you have been very helpful, but you may be interested as you seem to be au fait with the older MacBook Pros.
Some time ago, I purchased a new power supply for my Mac which came with a MAGSAFE 1 L-Tip magnetic adapter. The original had been a MAGSAFE 1 T-Tip but it had worn out and the coaxial screen was looking very exposed. All went well until, inevitably, the laptop was dropped. The L-Tip stayed in place and because of its sausage shape, dented the side of the casing. It [the L-Tip] would no longer make contact (because of its long body) so I reverted, very gingerly [an English expression?] to the original T-Tip which still worked. I then ordered what I thought was a new T-Tip supply but when it arrived, turns out there is now a MAGSAFE 2 T-Tip (which of course would not work). Maybe they have abandoned the L-Tip because it is self destructive. I have now finally returned the MAGSAFE 2 and await a MAGSAFE 1 T-Tip. A cautionary tale for those looking for a new power supply. -
MacBook Pro won't read audio cds
My MacBook Pro will not read digital audio cds.
It has in the past, but now it seems to have stopped reading them.
I have several purchased cds I would like to get on itunes, but I can't get it to recognize the discs.
I can hear it spinning several times, like it is trying to access the disc, then it ejects it without mounting.
It does not appear in iTunes, or anywhere on the desktop.
It will read and burn blank cds and dvds.
I havde a 17" MacBook Pro, 2009, with a MATSHITA DVD-R UJ-868 drive.
Anyone have any ideas how to get it to work again or what the problem could be?yes it could but probably not after testing ten different CDs right? Got the very same scenarion and asked the question again here, pls see https://discussions.apple.com/message/22423010#22423010
-
Powerbook don't read Audio CDs
My Powerbook don't read anylonger Audio CDs since I installed Tiger.
It read DVDs and Data CDs but no audio CD of any kind comercials or CD-R
It appear a messaje telling me that the disc inserted it is undreadble for the machine
Any Help ?
HernanJohn: Since your drive mechanism is plainly working OK, your problem is probably software-related. But to begin at the beginning, see:
http://docs.info.apple.com/article.html?artnum=25392
There are many links in that article to other articles. Resist the impulse to jump at any of them until you've worked your way through the whole article. My guess is that you'll end up following the link for software troubleshooting, but don't take my word for it: see whether the steps in the first article really lead you there.
If you can't get anywhere that way, try posting in the OS X 10.3 and earlier Usage forum, being sure to provide any additional details, including what you've tried to do in the way of troubleshooting. (There's no point in people suggesting things you've already tried, so don't waste their time or yours.) Good luck! -
Hi,
After using my DR8-A for a bit over 2 years without any major problem, i just found a peculiar behavior.
My drive can *perfectly* burn any type (data CD, audio CD, DVD both data or video) of media and even normally read any type of media (DVD, both data or video, data CD...), but it does NOT recognize any audio CD.
Stranger, it does not even recognize the audio CDs it burns itself
Any audio CD inserted in the drive would spin up, seek and spin down after a while, but not be recognized.
I search the forum about occurences of such problems and found many where the DVD stop recognizing some type of media, but just audio seems new. No solution was ever provided, except RMA (not really an option on a 2+ year old drive).
Anyway, not really a matter of life or death (i still have a plextor CDR to burn audio), but more of a curiosity.nope, once the disk is ejected, it is not recognized anymore. The Audio CDs burnt this way work great in any CD player (i have not tested them in the plextor for errors).
The funny part is that i did not change any configuration lately, but it still ceased to work.
I'm using a modified 1.5D firmware (and had been for a while). I may try to flash it to a 1.6D, but i'm not sure if i have a DR8A or a DR8A2 (which takes the 1.6D).
I may run more tests on the drive, but i'm not really worried. It served its 2 years and still act for the function i need (ie: burn DVD). I have a DVD DL on order anyway
Edit: Well, it seems that a few cold boot have fixed this problem. Weird... It did not last week end, when it manifested itself, but a power outtage took care of it. By the way, i tested the burnt audio CD in nero CD speed and the CD is perfect. No error. EAC is 10 with reliable stream. No idea where it came from or why it left, but good riddance... -
Optical drive reads audio cd's and burned dvd's, but not commercial dvds
I just upgraded my macbook hard drive, doing a clean install of Mac OS X on the drive in an external enclosure, then copying the remaining files, doing all the software updates, and swapping out my old drive. Everything works so far, except... the DVD player will no longer play commercial dvd's (movies and tv). The drive hardware seems ok, in that it reads audio CD's (through iTunes) and DVD's of tv shows burned on my home recorder... which suggests that the DVD player software is ok, too. Did a setting get changed in my software, where it thinks I'm putting in the wrong regional dvd type? The disk goes in, spins and makes noise, and, after a short while ejects out.
Here's what I get:
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZF1E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds -
Cannot burn Audio CDs (only Data CDs) since upgrade to Itunes 7
I'm having a problem and it is very frustrating. Worked fine with Ver. 6 but you had to download to ver. 7 before you could purchase any new music so I did. Big mistake! My problem is burning CDs. I can only burn "Data CDs." I went to "Edit" and then to "preferences" then to "Advanced" and then to "Burning" -At that point you have a choice to choose Audio CD burning or Data CD burning. I will not stay on Audio CD burning - keeps defaulting to Data CD burning and there is no "save" button or anything to stop it from happening. When it burns from the data cd it the cd will only play in my computer - not in my car or other player. Would you know how to correct this???? to stop the default? My ipod is fine. I hope Apple takes care of this soon.
Ok button was hidden by tool bar
-
For some reason when I insert installation discs for programs like iWork's and office for Mac the drive does not read the disc. I tried movies and music and they worked perfectly. I was able to fix the problem with the iWork's disc by creating a disc image in another drive, I have yet to do this with the Office for Mac but I would like to know what could be the reason for this problem. Any help is appreciated.
@ RabidPineappler and Froggiefo20...
I forgot that I have an extended AppleCare Protection Plan, I contacted Apple today (in Sydney) and they took me through step by step. I tried inserting my OS X disc and it accepted it, I tried putting in a commercial DVD (Star Wars) and it started playing. I then tried putting in a commercial CD and it wouldn't work through iTunes. It made incredibly sick whirring noises and then eventually (approx 5 minutes later) appearred on my desktop, but iTunes7 would not recognise the disc.
Then he suggested I log in under another username which I did... Then my drive prompty died. It does not accept any disc now. He said that I need to have my iBook seen to by a technician. Since I have the extended warranty, my repair shouldn't cost me anything (the extended warranty was ovver $400, so it better not cost anything), so I can't give you an indication as to what you will be up for.
You do not need o take your iBook to the place where you bought it, but ensure you have your sales receipt.
Hope I helped.
Clairbear -
Drive does not read Audio CD's
After upgrading to 10.6.3, the superdrive is no longer reading audio cds.
Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive -
Superdrive has stopped reading DVDs/ CDs!
Hello helpful people, i am having various problems with my emac with regard to reading DVDs etc. all of a sudden my drive no longer accepts any of my DVDs and struggles to read audio CDs. when i insert a DVD (that worked fine a week ago) i here a clicking noise and after about 5 seconds it just spits it back out. i initially thought it might be a scratch on the disk itself but then realised that it other DVDs were also being rejected. Audio cds occasionally work but this is often after alot of unpleasent noises and long wait. Does my superdrive need to be replaced or is there anything else i can do?
please help.
emac PowerPc G4 (1.1) Mac OS X (10.3.9)
emac Mac OS X (10.3.9)Welcome to the discussions.
The very first thing I would do is Repair Permissions.
This will many times resolve a minor glitch.
Other times it may require you to reset the Pram.
Have a look at Gullivers recommendations on System Maintence.
http://discussions.apple.com/thread.jspa?messageID=607640򔖘
To reset Pram, look below.
http://docs.info.apple.com/article.html?artnum=2238
Cheers Don -
I can't seem to listen to audio cds. I can read data cds and XMMS reads audio cds, gets CDDB info, and even appears to be playing them but I can't hear anything. I think all my volume levels are set properly. amaroK only gives me a "Could not read AudioCD" error.
Any ideas?whargoul, some time ago I solved exactly this problem in xmms with the solution that cdhotfire posted. Further, my experience is that xmms doesn't listen too well on changes in the preferences, so a restart (of xmms of course) may be necessary.
Cheers -
why does fcpx suddenly stops reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?
Could be systems logs or some other system file growing.
Use OmniDiskSweeper or DaisyDisk to map what's being used.
Regards,
Shawn
Maybe you are looking for
-
Unable to open .eps file "unknown format and cannot be opened" ?
A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail. Illustrator gives me a message "unknown format and cannot be opened" Photoshop give
-
Birthdays a day early in Calendar on Mountain Lion
On my Macbook Pro running Mac OS X 10.8.2 (Mountain Lion) all the birthdays from the "Birthdays" calendar are showing a day early in Calendar. E.g. When I browse to contact Joe Bloggs in Contacts it shows his birthday as 12/03/1987. When I go into Ca
-
(Yes, I've googled a bunch and read threads like this one already.) Can I use gpt or some other app to recreate/unerase a partition table? That is, how can I rebuild a disk's GPT/GUID partition table?) I don't want to do FILE recovery. What happen
-
Unable to get the print option in network for Services
Hi Experts I am unable to get the print for services in CN21/CN22 but the print option is in Disable Mode .How should I get it as to Enable Mode to get print .Pl find the attached screenshot for reference Thanks in Advance Ambarish
-
Mutilple calls in one transaction - what's the best way?
I need a session bean to perform following functionality (rought each one corresponds to a method) - update customer profile (name, address, etc., they are in one table) - update customer's services - update customer's phone book (they are in separat