Toshiba Service Station :: Windows 8 - Toshiba Start configurations

This update popped up for me in the windows service station today.
it says it is for Windows 8, but I'm running Widows 8.1.
Is anyone running Windows 8.1 run this update?
I'm assuming it won't even have any effect until the next auto-date so I guss there is no real way to check. Right?
Solved!
Go to Solution.

Post your model number!
Important update from Toshiba!
Toshiba Start enhancements for Windows 8 are now available to download for an improved online experience. This update will allow you easy access to important information to better support your Toshiba product. You will also be introduced to a wide variety of exciting content that includes news, social media, messaging and popular apps. By initiating this recommended update, you will enable Toshiba to automatically deliver future enhancements and updates to your customized content without interruption.
That is the Toshiba start, if you use it for your start page it has added some things.
I don't use it so I can not tell you the difference between the old and new version, except there were some more things on the page then it had before.
I did update mine but I don't know if it said W8 or W8.1 and I do not see anything different on my laptop
Again- post your model number it helps others find solutions to the same problems here on the Toshiba forums, by searching the forums for the issue and model, not all models will have the same issues and us volunteer's will not have to repeat the answers so many times.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Similar Messages

Agent service on Windows does not start

Ok:
Grid Control 10.2.0.1, repository 10.1.0.4, Linux Red hat 4
Target node is a windows 2003 server (kinda, its on VMWare) with no service pack installed (don't ask). There is no oracle software on the target node except an oracle 10.2.0.3 agent. We just monitor the host up/down.
Ok this was working until the windows server crashed. It was restarted but then the agent would not start. It complained about not being able to load files and after three attempts it crashed. I removed it from grid, deinstalled the agent then reinstalled it with no errors. The same thing then happened, start the agent ok, then try an upload and it would fail and crash the agent:
2007-04-12 14:22:14 Thread-1820 ERROR upload: Failed to upload file A0000001.xml, ret =
-6
2007-04-12 14:22:14 Thread-1820 ERROR upload: 3 Failures in a row for A0000001.xml, we give up
2007-04-12 14:22:14 Thread-1820 ERROR upload: Error in uploadXMLFiles. Trying again in 72.00 seconds or earlier.
2007-04-12 14:22:16 Thread-2360 WARN upload: FxferSend: received fatal error in header from
repository: https://<grid_host>:1159/em/upload
FATAL_ERROR::500|ORA-20206: Target does not exist: Agent does not exist for
https://<target_host.com>:3872/emd/main/
ORA-06512: at "SYSMAN.EMD_LOADER", line 1700
ORA-06512: at line 1
2007-04-12 14:22:16 Thread-2360 ERROR upload: number of fatal error exceeds the limit 3
2007-04-12 14:22:16 Thread-2360 ERROR upload: agent will shutdown now
2007-04-12 14:22:16 Thread-2360 ERROR : Signalled to Exit with status 55
2007-04-12 14:22:16 Thread-3776 ERROR main: EMAgent abnormal terminating
Rebooted the box (its windows after all!!) but now its worse!
The agent service refuses to start at all, when I try to start it via the services panel I get straightaway 'Error 1053 The service did not respond in a timely fashion'. An emctl start agent from the command prompt produces a 'The service is not responding to the control
function'.
In the logs:
2007-04-13 09:03:32 Thread-1872 WARN http: snmehl_connect: connect failed to (<target_host.com>:3872): No connection could be made
because the target machine actively refused it.
(error = 10061)
2007-04-13 09:03:32 Thread-1872 ERROR main: nmectla_agentctl: Error connecting to
https://<target_host.com>:3872/emd/main/. Returning status code 1
But nothing is grabbing the 3872 port on the target host for the agent. The target host can 'see' the grid control server. There is no firewall in between.
I have an SR open, oracle are pointing the finger at a dodgy agent install (I've sent them the install logs to verify) or a firewall issue, but the target host certaintly does not have one.
I'm a bit of a loss now to be honest, any thoughts anyone? Not really used the agent on windows much.

If I clean out the logs and do:
emctl start agent
emctl status agent
The only logs produced are emctl.log:
4064 :: Fri Apr 13 09:38:28 2007::AgentLifeCycle.pm: Processing start agent
4064 :: Fri Apr 13 09:38:28 2007::AgentLifeCycle.pm: EMHOME is c:\app\ora\product\agent\agent10g
4064 :: Fri Apr 13 09:38:28 2007::AgentLifeCycle.pm:Exiting with 2
3972 :: Fri Apr 13 09:39:03 2007::AgentLifeCycle.pm: Processing status agent
3972 :: Fri Apr 13 09:39:03 2007::AgentStatus.pm:Processing status agent
3972 :: Fri Apr 13 09:39:05 2007::AgentStatus.pm:emdctl status returned 1
emdctl.log which is blank and emdctl.trc which is the output I posted earlier. Not very much to go on at all

Service Station does not start automatically

Good morning,
recently the Toshiba Service Station application does not start when Windows (8.1) starts. If I launch the application manually, it runs normally.
I would like to restore the automatic start of that application. What can I do?

Hi
You can add the application (service station) to the Win 8.1 startup.
Go to the Start screen
Click on the down arrow to show all your applications
Right click on the application you would like to have start automatically.
Select Open file location
This will bring up the location (url) where the program is started
Right click and select Copy
On your computer, from the same Explorer window, go to:
C:\Users\USERNAME\AppData\Roaming\Microsoft\Window s\Start Menu\Programs\Startup
Note: USERNAME must be replaced by the name of the user that is logging in.
Then select Paste Shortcut
After that, the next time you log on, that program will start automatically.

Failed to Configured Domain Services for Windows

Hi!
I am installing OES 2 SP3 with DSfW Pattern as a "New Domain Controller in an Existing Domain Services for Windows Domain" with Replication Configuration and Schema Partition.
During the "Perform eDirectory Configuration" at last task "Configure Domain Services for Windows " at 93% we encountered an error: "Failed to configure Domain Services for Windows".
Here's details of error ;
command : perl /opt/novell/xad/sbin/ndsdcinit.pl retry full-replica -d 'vec.apd.com.ph' -l 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'
-g 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph' -f 'apd.com.ph' -p 'apd.com.ph' -o 192.168.81.92 -t
Could not create gss directory /etc/opt/novell/xad/gss at /opt/novell/xad/sbin/ndsdcinit.pl line 463, line 652
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
SASL/GSS-SPNEGO authentication started
SASL SSF: 56
SASL installing layers
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 503
at /opt/novell/xad/lib64/perl/Logger.pm line 119
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 202
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 532
adc_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/install/adc_install.pm line 150
adc_install::stage_domain('adc_install=HASH (0X8b9370)') called at /opt/novell/xad/sbin/ndsdcinit.pl line 1383
main::main(62, 'apd.com.ph', 'vvec.apd.com.ph', 'TRUE','ou=OESSystemObjects,dc=vec,dc=apd,dc=com,d c=ph','ADM_PASSWD_DOMAIN','ou=OESSystemObjects,dc= vec,dc=apd,dc=com,dc=ph','replops::DESTROY',
'APD.COM.PH',...) called at /opt/novell/xad/sbin/ndsdcinit.pl line 1301
main::main() called at /opt/novell/xad/sbin/ndsdcinit.pl line 1425
ENV PATH = /opt/novell/xad/sbin:/opt/novell/xad/bin:/opt/novell/xad/share/dcinit:/opt/novell/eDirectory/bin:
LIB=lib64
LD LIBRARY PATH =
/opt/novell/xad/lib64:/opt/novell/xad/lib64/nds-
modules:/opt/novell/eDirectory/lib64:/opt/novell/eDirectory/lib64/nds-modules
SASL PATH = /opt/novell/xad/lib64/sasl2
DCINIT CONFIG: /etc/opt/novell/xad/xad.ini
DOMAIN NAME: vec.apd.com.ph
PARENT NAME: apd.com.ph
FOREST NAME: apd.com.ph
NETBIOS NAME: VEC
Any ideas on this error ?
Regards. Thanks.
denzmo

Thanks for the reply.
I have some followup questions
2. Can you explain the DNS setting in your setup ?
Tree ---> Power--> apd.com.ph -- dlpc.apd.com.ph
-- vec.apd.com.ph -- Andromeda.vec.apd.com.ph (DNS)
-- Pictor.vec.apd.com.ph ( additional domain server ) -> "Failed to configure in DSFW"
1. apd.com.ph, dlpc.apd.com.ph, vec.apd.com.ph are DSfW domains or just DNS domains ?
2. Andromeda.vec.apd.com.ph (DNS) - is this the DC of a DSfW domain ?
3. You are adding the Additional domain controller to the vec.apd.com.ph domain right ?
The
# LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf /usr/bin/ldapsearch -Y EXTERNAL -s sub -b dc=ph "(objectclass=dniplocator)" dn
Heres the result ;
a.) running the command in the DNS server (child domain) ANDROMEDA;
SASL /EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0, cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
# LDAPv3
# base <dc=ph(objectclass=dniplocator) [email protected]> with scope subtree
# filter: (objectclass=*)
# requesting:ALL
# search result
search : 2
result : 32 No such object
text : NDS error : no such entry (-601)
# numResponses :1
This is strange. This ldapsearch is failing to find the locator object in the tree under dc=ph.
- Can you try this same command from your FRD DC too and find the result ?
- Is your server non-name mapped or your adding a DSfW server into an existing eDirectory tree (name mapped) ?
- If it is later can you try the same search with '-b' parameter replaced with container to which FRD is mapped to into the eDirectory Tree.
- Can you tell in your setup where are the locator object present for your first DSfW server which is acting as DNS server ?
- While installing this ADC server, you have given the remote dns server as 192.168.81.92. In the YaST DNS screen did you do retrieve (by clicking 'retrieve' button on the screen ) or you entered those inputs manually ?
- Another follow up question. The locator context provided to the ndsdcinit command in your first post, is 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'. Can you confirm your locator
context is correct ?
[/QUOTE]
b.) running the command in the ADC PICTOR;
SASL /EXTERNAL authentication started
ldap_sasl_interactive_bind_s: invalid credentials (49)
[/QUOTE]
This is expected as the server is not completely configured.
Please get it touch with our NTS for passing on more information about this setup.

Windows could not start the Network Location Awareness service on Local computer

i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
haus

Hi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support

What is the oracleservice in windows meant? =starting the DB

Hi all,
What does the service oracleserviceSID does in windows.
Is it the starting the oracle db server.
I know its not starting the DBINSTANCE .does it starts the oracle services to run the Db.
IF the DBCONSOLE is not started i cant see the EM
Is that means it starts the necessary process for that apllication
Thx
Maran

Maran,
I am not sure if this will answer your question but I have confirmed with Oracle that if you create a service under windows and the start mode is auto, then if you start the machine, the db is started and if you look at the status, it will be open. if you restart the machine, the db will be shutdown immediate.
And i guess if you do not start the db console then you will not be able to login thru EM web internface.
To check the status of dbconsole
$ emctl status dbconsole

Service Station closes after starting after install of 3 Toshiba patches

Hello there,
there was recently a "patch day" in Toshiba Service station. I believe from my memory the patches came out earlier but I installed them on 23 april 2010. There were three patches and as far as I can reconstruct from the system recovery it were:
- BIOS flashing
- HDD/SSD Alert patch
- HDD Recovery patch.
So, besides that I had problems getting the BIOS flashing patch to run, eventually succeeded by extracting the installation files to a different location and run it with administrator rights.
My problem is, that after this patch session, my Toshiba Service Station does not start up any longer. When I start my system, after logging on it seems to start up but then always closes again with the windows error report saying "stopped working" and that's it. I am not sure of which patch this could be. Also I believe that one of these patches said in the description that it will update Service Station itself?! I downloaded Service Station from the Toshiba Website but it will not turn out to the better, doesn't matter if I uninstall it before, start the installation with administrator rights or not.
My system is Satellite A500, Windows 7 64bit.
I hope you can help. Unless I cannot access updates any longer!
Note: Some days before I installed a graphic's driver for my Nvidia GT 230m FROM THE NVIDIA WEB SITE. Why did I do so? I experienced literally HOURLY an unwanted system restart and as I can see from the problem report it was always due to the graphic's driver. In the following I installed the two patches from the Toshiba Website, the older and the newer but the problem persisted. Luckily at some day I recheched the Nvidia website and there was a new driver.
Although it said BEFORE (not now any longer) that this graphic card should rely on a manufacturer driver, I nevertheless installed it because it coulnd't become worse. The positive thing is, that I had not a single system crash until now even if I leave the laptop switched on for hours.
I am not quite sure if the problem with Service Station started right after this graphic driver installation, but it can't be because I installed the three patches mentioned above THROUGH Service station some days later.
But it might have affected the software after these patches? I am not sure.

Hi
Simply said; Toshiba Service Station crashes and new installation of this tool didnt help.
Right?
Well, because you are not sure whats wrong and according to the posting, you have got some other problems related to the software, I recommend to recover the notebook using the HDD recovery option!
This will set the notebook to factory settings.
Of course you should backup the data if you have important files.
Run HDD recover and after that check how the notebook would functions!

TOSHIBA Service Station Server Issues on Windows 8.1

I have gone back and forth between installing and uninstalling several versions of the Service Station on my Toshiba Satellite C855D which is running Windows 8.1, I even shut off my firewall and disabled and changed setting on anything that would be blocking the connection to the Service Station Server. Is anyone else having this issue? I have included a screen shot from the last install which was 2.6.8 but all the errors are exactly the same even on version 2.6.13. I don't know what else to do to resolve this matter. HELP please...
Attachments:
Screen Shot 01-04-15 at 10.14 PM.PNG ‏131 KB

Which Satellite C855D? There is a label on the bottom.
-Jerry

WHEN MY LAPTOP STARTS IT SAY THIS AFTER IT BOOTUP TOSHIBA SERVICE STATION STOPED WORKING.

I HAVE A SATELLITE L445 S5000 ONLY HAD IT FOR 5 DAYS NOW THIS MESSAGE.CAN YOU TELL ME WHAT TO DO TO STOP IT PLEASE..

First, go into Device Manager and uninstal Service Station. It's basically useless.
Next, go to the Communicate link at the top of this page and click on the Sign Up For Updates link. Now fill in the model number of the system or systems that you want to keep track of and you will recieve an e-mail whenever there is an update posted for that model. The service station only alerts you to Critical updates while the Sign Up For Updates will alert you to ALL updates which is much more useful.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Toshiba Service Station stopped working

If any could help would much appreciated,
Did a clean upgrade to windows 7 with no problems couple of months ago. Now when I start up get error message: Toshiba Service Station Stopped working.
I've uninstalled and reinstalled the file several times, and re-downloaded the file but same error appears after installation. Is there an update somewhere for this, or a new version?

All you have done is right and obviously there is some problem with Win7.
Maybe Toshiba will release new version soon.
Which notebook model do you have?

Toshiba Service Station Problem

I use the option to reinstall windows on my Toshiba to start again, but when I went to install the updates with Toshiba Service Station did not find any upgrade and when checked discovered that the program did not show the information from the PC.
http://gyazo.com/d95e71f3a007e2e0d2c728232fead2ac
My Toshiba is a C45-ASP4206FL
Sorry for the English, I'm using google translator.

Your support page is here - http://support.toshiba.com/support/modelHome?freeText=1200005566
uninstall the Toshiba service station, then re install from your support page or here - http://cdgenp01.csd.toshiba.com/content/support/downloads/TC00398200D.exe
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Error saying that windows failed to start 0xc000014c on my toshiba satellite A210

On my Laptop, a Toshiba A210, I get an error saying that windows failed to start. File:\boot\bcd status: 0xc000014c. i already put in a windows recovery disc and it still came up with this message. I removed the HDD and restarted the laptop, and it brang up windows install but it cancels that out before the install starts, even if i stick the HDD in after start-up.
Can anyone help me with this issue please?

Which A210? Which Windows? Which service-pack level?
Maybe you are resuming from hibernation? Press and hold the power-on button until the computer shuts off to get out of this state.
Maybe you have Windows Vista?
Error message when you resume a Windows Vista Service Pack 1-based or Windows Server 2008-based comp...
-Jerry

Toshiba Service Station

Plz Help .. For the past week I have been getting the popup message "Toshiba Service Station has stopped working" whenever I bootup my L555D-S7930 Satellite laptop. I am running Windows 7 (32 bit). This popup has 2 options .. Search online and close app or close app. I have tried the "search" option but it does not seem to be fixing the problem because it still comes up the next time I bootup. Most of the time I just use the "Close" option but I would like to either fix the problem or if the app is not needed then to just shut it down.
Solved!
Go to Solution.

Service Station is basically useless anyway so you aren't missing much by uninstalling it.
Go to the Communicate link at the top of this page and click on the Sign Up For Updates link. Now fill in the model number of the system or systems that you want to keep track of and you will recieve an e-mail whenever there is an update posted for that model. The service station only alerts you to Critical updates while the Sign Up For Updates will alert you to ALL updates which is much more useful.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

A505-S6980 Toshiba service station shut down

I have an A505-S69803 with windows 7 for 3 days. Now when it boots up it says Toshiba Service Station must close. I reinstalled the app. and as soon as it says complete it shuts back down. Can anyone help?

Hi
To be honest I have no experience with this tool.
Im using Tempro.
However, I assume Toshiba service station was not tested and not designed for Win 7 at this time.
Maybe you will need to wait for next update which would work with Win 7 properly.
You must understand that the Win 7 drivers were published as Beta version this would mean that the final version would be released in the next time
In my opinion you should take a look from time to time on the Toshiba US page.
I noticed that every day new drivers are released and published.

Toshiba Service Station update

Hi everyone,
I just got a message from Toshiba Service Station that there are software updates for me to install. In it, there are 3 BIOS version updates, 3.40, 3.10, and 3.00. Do I need to install them one by one starting with the lowest one or can I just go ahead and install the latest one, the 3.40 version? Thanks alot!

3.4 will incorporate all that was changed in 3.0 and 3.1. However, the common wisdom on this site is, unless you are having a problem that these updates were designed to correct, leave well enough alone. Many problems seem to be created when messing with the BIOS. If it ain't broke, don't fix it.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Toshiba Service Station :: Windows 8 - Toshiba Start configurations

Similar Messages

Maybe you are looking for