Toshiba Tecra A7 don´t "power on" only blink the batery led 10 times

Please help
Toshiba Tecra A7 don´t "power on" only blink the batery led 10 times
Thanks
Xavier
[email protected]

Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
- Peter

Similar Messages

Purchase requisition created only for the vendor lead time

Hello MRP experts,
I have a requirement that the purchase requisitions should be created by MRP only in the vendor lead time and rest of them should be in planned orders. Can this done and if so how. Thanks in Advance and due points will be awarded.

Hi,
As per my understanding there is no standard settings to achieve this requirement.
Regards,
Manish

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

My iPhone 5's screen will only blink the apple logo on and off but never fully turn on

When I plug in my iPhone 5, it will only blink the apple logo on and off but never fully turn on. I tried to reset and that didn't help, any suggestions.

Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I have an issue syncing my iPhone 4 with itunes. This has only happened the last few times i have tried but don't know how to resolve it. Please help.

Hi, the last few times i have tried to sync my iPhone 4 to my itunes it won't work. I plug my phone into my computer, to sync any new pictures i have taken or add my new music i have bought on my phone, and hit sync. It appears to start syncing then an error message appears saying the following:
The iPhone 'my iPhone' cannot be synced. You do not have enough access privileges for this operation.
I'm not sure what this means or why this keeps happening. I have the latest iTunes and i have not done anything different. It appears to have wiped some of my music from my iPhone and a number of my photo albums off. Please can someone help or advise how i resolve this issue. Thanks.

When you set up iOS7 the second screen specifically asks that you create a four digit code .
That's what you now need to re-enter in your phone.
Once entered you can go to system/general/Passcode lock
Re-enter the same code and choose turn Passcode off
iOS 7 has been designed to enforce minimum passcode security by default or in the case of the new 5s use of finger print level security.

I have an inetrnet modem and the time capsul one, I need to shutdown the internet modem signal so I only get the one from Time capsul. Does anyone knows how to do that?

How do I turn off a modem signal so I only get the one from the time capsul?

What is the make & model of your modem?

When Firefox is launched, my system tray is disabled(masked by some kind of gray mist), then I can only acitvate the date and time properties by double-click, any left click does not make sense. Did anybody encounter this situation?

I can not activate the minimized window task manager, even when I end the procedure of taskmgr.exe, its minimized icon is still there in the gray masked system tray.

I can not activate the minimized window task manager, even when I end the procedure of taskmgr.exe, its minimized icon is still there in the gray masked system tray.

Power Button only sleeps my MacBook Pro

Greetings,
After upgraded my mid-2010 MacBook Pro, the power can only sleep the computer. The dialogue box no longer appear that gives us the choices of shut down, sleep or restart. I can't find anyway in the System Preferences that can configure this. Any help? Thanks.

Due to a few complications and experiences, a single click on my power button no longer puts the computer to sleep
The couple of seconds for the dialog works, but the single click does nothing.
I reinstalled the OS, to solve another issue, but the button still the same.
How can I reset it's funcionality?

Why don't I get rings around the numbers on my iPod?

The image on the left is something I pulled off the web, the one on the right from my iPod 5G. Where are the circles on mine? Is there a way to enable them?
I have only seen the circles three times since updating to iOS7.

I have no idea why they don't show up. Maybe that is something for another thread.
Regardless, the left image shows white rings around the unlock-your-screen numbers and four smaller circles under "Enter Passcode", the right one shows none of them.
I was playing around with it last night and selected one of the Apple images for the lock screen and I got the rings. I selected one of my images and they disappeared. Maybe that has something to do with it. I would like, at the least, to have the four smaller circles.

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I'm having problems with my email account. I receive emails when I'm in a wifi zone. But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network. Only when I power off the phone and turn it back on, do I re

I'm having problems with my email account. I receive emails when I'm in a wifi zone. But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network. Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)

In your email settings on the phone check to make sure it is set to receive emails on cellular network. It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on.

Toshiba Power saver may be the problem

My Satellite A665-S6050 has had all of the symptoms you read about in these forums;
crash, freeze, hung, locked, BSOD, Windows crash errors, etc.
I bought the laptop new a couple years ago and both love it and hate it when it exhibits
its freezing behavior. This is the intel I-3, 4 GB ram, Windows 7(64 bit) version. Really nice
when it's running normally.
I have watched and read through hundreds of posts throughout these forums since my purchase.
I have never sent the laptop back to Toshiba. Primarily because I've been able to force power off
then on, go to safe mode, schedule a disk scan on the next power up, reboots normally and I'm good
for who knows how long.
Following suggestions you can read in these forums, I have upgraded the Intel HD graphics display driver.
I install Windows updates every time they come available(auto update is enabled). I've updated the
Toshiba bios. I've updated Firefox every time it is available(my favorite browser). Updated java and
flash(again automatic updates). Some user settings that I've changed; I've disabled sleep mode(set it
to 'never' under 'advanced power settings) in every power scheme I have. I only use 'High Performance'
power scheme(plan). I have the setting for turning off the hard drive set to 'never'. My rational for doing
this is there is just too much going on under Windows 7, all the time. You never know what's running in the
background. Many times as the laptop freezes and or Windows tries it's best to recover, I get a strong feeling
that the hard drive has shut off! Especially, when Windows is trying to save a dump but can't because it can't
access hd0(hard drive)(I have to force power cycle off/on to recover).
This brings me to my current state of this troubleshooting saga. The last time the laptop froze, I was watching
streaming video in one Firefox window and had a slide show playing in another Firefox window(2 windows, not
2 tabs). Then in the lower right corner I get the Toshiba power saver notification that it is shutting down the
optical drive. It goes away on it's own in about 10 seconds. But immediately everything gets real slow until every
freezes. Windows tries to save a dump but can't. Windows tries to reboot itself but can't. Shows me a screen to
modify the boot list because the hd0 is not available. So, as so many times before I have to hold the power
button down for force power off. Wait a few, then power on, do my thing with safe mode, check disk, etc.
Power up and boots normally. Runs great for who knows how long. Right now as I type this, I have a audio CD
in my optical drive with Windows Media player set to 'replay' continuously. This I hope will prevent the 'Toshiba
power saver' from getting triggered because the optical drive is not idle and therefore won't shut off the hard
drive too! I have no idea how I can prove that 'Toshiba Power saver' is causing these freezes, crashes, lock ups,
etc. But at least if I can keep the optical drive in use and therefore prevent the 'power saver' from kicking in
maybe I can eliminate that as a possible cause of the freezes.
I am really disappointed to read so many Toshiba owners sending their computers to Toshiba service
hoping and praying for resolution but getting no satisfaction in the end. I love my Toshiba and I'll keep it.
I am a recreational user. Don't need to save power. When I use my computer, I want it to function as
powerful as possible until I intentionally perform a normal Windows shutdown.
My employer supplies me with a laptop (different brand). It has Intel I-5 chip, 3 GB ram Win XP Pro..
I run that computer full speed 9 -10 hours a day and I may have to reboot maybe once every other week.
Not bad considering the abuse I put it through. I would hate to have to rely on this Toshiba for work. I
don't think it could stay fully operational for that period of time.
Please Toshiba, tell me how I can help with the troubleshooting of this seriously pervasive problem on
so many of your computers. Is there an event log I can provide? Windows dump files(when they do get
saved)? Help me help you resolve this problem and satisfy hundreds of your customers.
Thank you in advance for your time.
Doug

Jerry,
It happened again this afternoon. This is the first time my system froze since the last time
I reported here in the forum. And just like I reported earlier, Toshiba Power Saver turned off
the optical drive power, I saw the pop-up in the lower right corner to notify me of the event.
I had Toshiba 'PC Health Monitor' running and minimized. I clicked on the icon to restore it
to the desktop. It displayed as expected. The hard drive graphic looked normal and spinning
as usual. I clicked on the graphic of the spinning hard drive and expected 'Power Options' to
display. Instead my desktop went away(all icons, system tray, system notification area, launch
pad, etc), everything gone. The graphic of the spinning hard drive stopped spinning. I tried a
CTL+ALT+DEL and got a new pop-up from Windows that it couldn't respond and I had 2 options;
press ESC or hold the power button down to force power and a shutdown. Which is what I eventually
did.
Powered up, went to safe mode, scheduled disk check on the next restart. Disk check runs and
finds no problem. System runs normally again.
As far as finding these events in the Windows logs using 'Event viewer', is not going to help.
I know exactly what time this all took place. I just can't find any event log showing that it took
place. There's a small gap in the time stamps just before the event until a few minutes after the
event. Then I see a mixture of 'errors' and 'information' events after the power on and restart
but nothing specifically addressing the hard drive before the restart.
I see an event log; "Previous shutdown was not expected". I'm sure that's not what your asking
to see. I don't know if it would be possible to trace the 'Toshiba Power Saver' but that may be
the only way I could prove my point that it is shutting off power to both the optical drive and
the hard drive at the same time.
Is there a way to disable or remove Toshiba Power Saver without causing a more serious problem?
Thank you in advance for your time and expertise.
Doug.

Toshiba tecra a11-17c refusing to boot from LAN

Hello
I am working on a Toshiba tecra a11-17c. We currently have about 18 of the same laptop and the person who originally built the computers has left the office we are currently working at.
The issue I am have is that I want to boot the computer from lan and do a windows 7 installation on the laptop but I keep getting the error "Media test failure, check cable"
I know the cable is working because I was able to build a Toshiba satellite pro l20 perfectly fine
The other Toshiba tecra a11-17c laptops have the same issue when trying to rebuild them too
I am fully able to log into a Toshiba tecra a11-17c and connect to the internet via the same network cable and port when in windows.
I have also tried to swap the hard drive with a different tecra a11-17c but it just kept getting a blue screen as soon as the windows flag appeared.
I then tried a format of the hard drive and a reset to default of the bios settings as suggested in a different forum.
I then tried to clone a fully working hard drive from a different fully working tecra a11-17c and it just dose the blue screen as stated above.
I then used an old windows XP recovery disk for the tecra a11-17c it did the build fine no issues then when it came to build to windows but as stated above it just dose a blue screen the same as windows 7.
Now I have no idea what to do but to believe it is something Toshiba has done with the tecra a11-17c range because its the same issue for all 18 of the tecra a11-17c laptops I have here.
Any way I am at a loss and have no idea what to do it seems to be something as simple as the network card need to be turned on during the boot phase but I can not find anything in the bios.

I'm sorry but I have no experience doing what your attempting to do. However, for your information, this site is for U.S. models only and I would suggest you also post in the appropriate regional Toshiba Support forum to get better suggestions. Good luck
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Re: Satellite A200-1ZF Win XP & Toshiba Control buttons don't work

Hi,
I have a Satellite A200-1ZF with Vista installed originally.
I removed Vista and install XP. And then installed all drivers and almost everything is working but those keys (power,www,mediaplayer,play,stop,back,next) on the upside of notebook don't work. :/
Only power work properly ...sometimes www and mediaplayer, but rest of it doesn,t work at all.
I have Windows Media Player 9 series. I don't know if it is problem with my drivers or windows media version or something else..
please help..

Hi
Satellite A200-1ZF belongs to the PSAE6E series.
Choose this series in the Toshiba European driver download form.
There you will find a XP BIOS. If you are using Win XP on this notebook then you have to update the BIOS to the XP version!
Furthermore you have to install the Toshiba Controls v. 2.48.2.2C.
This tool is needed to get the Toshiba Media buttons working!
Bye

Toshiba Tecra M1 - Won't reboot

Hello @ll
This is my first post on this forum. I write from poland, so forgive me for my poor english.
I have a problem with my old laptop (Toshiba Tecra M1). Computer won't reboot. After the Arch installation everything was fine, command init 6 was working correctly. When I was doing installs and configurations (adds daemon's to rc.conf, modifying fstab, install KDEmod etc.) i was rebooting system to see how it works. I don't know when, but after 3th, maybe 4th reboot system won't boot. I can see the screen which contains information about closing daemons, but after this listing I can see only black screen, computer stops and nothing happens.
Thanks for any advices
Last edited by pmd (2008-08-14 11:59:16)

On this virtual way nobody can say for sure what the problem is. As Joe already wrote it is hardware related issue and it should be checked by technicians. Fact is that this Tecra M1 is pretty old notebook model (I had it 8 years ago) so I think repair is not a option.

Toshiba Tecra A7 don´t "power on" only blink the batery led 10 times

Similar Messages

Maybe you are looking for