Toshiba TV with older Mac Mini

Hi,
I was thinking of buying a HD TV by Toshiba that claims it can be connected to a Computer (makes no mention of Mac) using it’s “PC INPUT (15-PIN D-SUB)“ port. I’ve seen others mention using HDMI instead. What port on my older Mac Mini would I connect to? I think the video port is an HD monitor out.
Anyone have any experience with this? I wanted to use the TV as a monitor for the Mini some of the time.
Any help or suggestions would be appreciated.
Thanks, and so long for now, TOM

All minis have had some form of DVI up until the most recent model. DVI can provide either an analog or digital signal, and because of the ubiquity of VGA monitors the early minis came with a DVI to VGA adapter. The same DVA connection however can deliver a digital signal if the video hardware in the computer supports it, which the minis always have. Audio is not included in this type of connection however, although some TVs support using a combined HDMI and secondary audio input. Many times one HDMI is specifically grouped with a set of RCA inputs on the back for this purpose.
The big difference in how you connect is that most standard video devices sources have historically used an overscan method of image delivery. The image is actually larger than the screen area you will be presented, so the TV overlaps the outer part beyond the actual viewing area. This is largely an artifact of when CRT TVs had fairly widely varied true display areas, and even broadcast equipment couldn't provide a perfectly consistent image area. Because this practice is still used, most video input methods designed for 'dumb' video source like broadcast, cable, satellite, or set top boxes and players use an overscan method. Some TVs allow you to adjust this for the normal video type inputs, like composite, component, S-video, and HDMI. Computers have basically always used a pixel for pixel image rendering model, so VGA as an almost exclusively computer standard does not use overscan. Thus, when a TV has VGA, that input does not use an overscan method to display the image.

Similar Messages

  • Pictures distorted on new Mac mini with Yosemite that were clear on older Mac mini

    Pictures are distorted on new Mac mini with Yosemite that were clear on older Mac mini.  How do i adjust the resolution?

    Hi there lapineassembly,
    I understand that you wish to adjust the resolution of your display on your new Mac mini. Here is an article for you that can explain this issue:
    OS X Yosemite: Adjust your display’s resolution
    http://support.apple.com/kb/PH19043
    If this does not resolve the issue with the image you are asking about, would you mind providing some more information about the nature of the issue? Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I have an older apple keyboard, either a M2452 or a M7803.  Do these have compatibility issues with 2012 Mac Minis?

    I have an older apple keyboard, either a M2452 or a M7803.  Do these have compatibility issues with 2012 Mac Minis?

    I understand that you can connect any keyboard to a Mac Mini, my concern is that the modern Apple keyboards I have seen seem to have a layout much more similar to their PC counterparts. ie, they no longer have the "apple" key, etc. 
    Will I be missing functionality (using this older Apple keyboard)?

  • I am having trouble with my Mac Mini's ethernet connection.   Defining a new network interface shows no ethernet adaptor.  Reloading SL from DVD repaired.  But SL update lost ethernet again.  Will Lion Fix?

    I am having trouble with my mac mini ethernet.  It had been working for weeks after an update to SL 10.6.8.
    Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
    But yesterday, after a power up.  my ethernet was not working again. I tried this old trick to repair it, but the interface choices
    listed for '+' a new service did not include Ethernet any more.  And the Utilities->System Profiler->Ethernet Cards shows
    no ethernet available.
    As a last ditch effort i reloaded my original SL from DVD.  (I think it was version 10.6.4 but i could be mistaken on the version).
    The ethernet worked!  But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
    So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
    Now the Ethernet is not working again.  I see the same symptoms as before with the Ethernet seeming not installed.
    Is this a problem seen by others?
    Would going to Lion fix the problem?
    Could AirPort actually be the culprit and not SL?
    If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

    Have you reset the SMC?
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

  • Older Mac Mini and iLife11

    Hi there
    I have a older Mac Mini (MA608B/A) Intel Core Duo 1.83 GHz upgraded with 2 GB RAM with OS 10.6.5 installed. I want to upgrade my copy of iLife as I'm still running the original iLife06 that shipped with it. I'm wondering whether my Mac Mini is really man enough to run iLife 11? Yes my mac meets the 'minimum specs' for running iLife11 but that doesn't necessarily mean it is capable of running it quickly and efficiently. Last thing I want to do is buy iLife11 and find my mac becomes so slow and clunky that the applications are rendered virtually unusable.
    Are there any other users out there with a similar spec Mac Mini who have iLife11 installed who can report how it runs on their Mac Mini's, or would i be better off getting hold of a previous version such as iLife08 or 09?
    Cheers
    Jonty

    I'm also having speed problems with two 1.83 mhz duo's. In the last six months, even before I installed snow leopard and ilife 11, it has been extremely slow. I'm wondering whether there is something in the updates making the computers exceptionally slow.

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Cant use my Ipad with my Mac Mini after updating Ipad OS

    So after upgrading my ipad2 to the latest OS, it now will no longer communicate with my older mac mini. I open itunes on the mac with the ipad attached and it says I have to update to the 11.1 version of itunes to access the ipad. But my Mini Mac only runs Mac Os 10.5.8 (try to do a software update but it says everything is up to date) which is below the system reqs for the new itunes. Did apple just screw me? I like to put songs and what not from my computer onto my ipad, and likewise get video from my ipad onto the computer. Does anyone know a workaround? I wouldnt like to revert the ipad back to the older version because I recall having some other issue where I was forced to upgrade it.

    Choose About this Mac from the Apple menu and check the processor.
    If it's a PowerPC Mac, you can't sync the device, but depending on your country, may be able to download iTunes Store purchases straight onto it and/or sign up for iTunes Match.
    If it's an Intel Mac, click here, install the DVD, and run Software Update twice.
    (99329)

  • HT4796 Transfer files from older mac mini to new macbook pro: incompatible ports

    I have an older Mac Mini with only USB ports.  I just bought a MacBook Pro with thunderbolt and USB 3 ports.  I need to transfer my data to my new MacBook Pro using the Migration Assistant but the direct connection ports are not compatible.  How can I do this?

    Use FireWire, Ethernet, or wireless. The first two can be adapted to a Thunderbolt port.
    (99278)

  • New mac mini server: Install OS on older Mac Mini?

    I have an UBUNTU server running on the network and was thinking of replacing it with the new Mac Mini Server edition. I also have an older (2009 - intel) Mac Mini.
    I was wondering if I could install the OS X Server OS that comes with the NEW mini on the OLDER Mac Mini and reformat the newer server as a "normal" workstation.
    I can deal with the optical drive issue. I'm just wondering if the OS X Server software is tied to the newer hardware in any way.
    I'd be saving about $300 this way - not a big deal but still worth it. The "traditional" way would be to buy an new Mac mini as a workstation and a copy of Mac OS X Server for the older Mac Mini
    Tom

    I was wondering if I could install the OS X Server OS that comes with the NEW mini on the OLDER Mac Mini and reformat the newer server as a "normal" workstation.
    No. That OS can only be installed on the Mac model it shipped with.
    (52238)

  • Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

    Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

    I agree with Grant. But to answer your question, that would be Word 2008. A quick search turns it up on sale at Amazon. You'll need to find it somewhere other than Microsoft itself, since MS stopped selling it when they released Word 2011.
    http://www.amazon.com/Microsoft-Office-2008-Mac-Version/dp/B000WR2F2M

  • Downloaded tv show episodes. Bought the entire season and after watching one and downloaded first 4-5 they disappeared.  This was during the time I was trying to migrate stuff from an older mac mini. Help?

    I downloaded several episodes of the tv show "touch."  I purchased the entire season and had watched one show.  It took quite some time for each show to download, but I had downloaded 4-5. 
    About this time (within the last two weeks) I was trying to use migration assistant to migrate information from my older mac mini and my macbook.  while I was able to move things from my older mac mini I noticed that the tv show went missing. 
    Also I purchased a program called 'Touched" in a season pass.  After I downloaded a couple of episodes I watched one and continued to download the episodes as they were available. 
    I also purchased a program called "Tune Up" which elminates duplicates of iTunes songs.  I have a large collection and this helped to get rid of the duplicates faster than clicking on them one at a time.  Maybe this had something to do with the tv shows episodes and the podcasts disapeering. 
    Any ideas?

    This may help
    http://support.apple.com/kb/HT2519
    As far as the TV series being in 1080p then that is upto the content provider and some older seasons are in 720p or only SD eg Stargate
    It may well be that the season you want is only available in 720p

  • Jolly Giant gave good advice re. ITunes and unable to download the latest version on my older Mac Mini.  I downloaded ITunes 9.2 as he suggested but came to a standstill at the place where we "agree" w Couldn't open  without Iwork (don't have)  Help!

    Jolly Giant gave good advice re. ITunes and unable to download the latest version on my older Mac Mini.  I downloaded ITunes 9.2 as he suggested but came to a standstill at the place where we "agree" with terms. Couldn't open  this without Iwork which I don't have.  Help!  Carolyn

    Hello, no way you should need iWork to "Agree"!?
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    And if you're really at 10.4.2, then get this and apply it...
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    Repair Permissions afterwords, reboot.

  • Media Center - older Mac Mini

    I have an older Mac Mini - Late 2005 (NON-Intel, running Tiger) sitting in the closet and I'm looking at alternatives that will allow me to finally sever the cord to paying for high cable when I don't watch most of the channels to begin with.
    With the 512 MB, I'm wondering if it will allow me to get by enough to be able to use Hulu, boxee, my Airport and other sources to stream content to my HDTV that I'll connect with a DVI to HMDI cable? I've looked at lots of articles, but they all seem to be using an Intel model
    I really don't want to buy an Intel mini, just to do this - although, all the money I save from not paying the cable company... hmmm.
    Thoughts, tips, suggestions?

    BSteely wrote:
    Since you already have the mini, why not try it and answer your own question about whether you are satisfied with the outcome or not?
    Generally speaking, I think you will find the G4 mini to be a bit under powered for what you have in mind. Adding more memory won't help much.
    Thanks for the response. I had every intention to give it a shot, but wanted to see if anyone else had tried with such a low-powered model just to read about their experiences.
    I bought the cable and the wireless keyboard and played around with it yesterday.
    I came to the conclusion that I need to look for a bargain and invest in an Intel mini. The streaming was great. I only noticed that there was a buffering issue when I tried to watch a TV series from the 70s; it kept stalling every few seconds. (But) two movies and A Charlie Brown Xmas played fine.
    I see great potential, once I obtain the mini, so time to check a few prices in a few places.
    In the meantime, I can at least upgrade the current model to Leopard, just for kicks

  • Wifi concerns replacing eMac with new mac mini

    I have an eMac (PPC) which is currently maxed out at 10.5.8.  I was thinking of upgrading to a mac mini.  My only concern is that I currently have an old mac mini (late 2006) and it's ability to use wifi with its internal airport interface is severely limited.  The only placment I have found this mac mini to reliably work in is if the mac mini and the wifi router (belkin) are located in the same room.  The eMac I'm thinking about replacing is on a different floor than the router it's airport interface just works, as do all of our laptops.  I understand that some the wifi problems with this mac mini might have to do with the antenna placement in its chassis.  So my question is has Apple improved the reliability of the airport interface in the mac mini ?

    The router is really NOT the issue as far as I can tell.  Laptops situated right next to the mac mini have no problem getting and maintaining a connection.  The eMac with a much older airport card and situated on the same floor as the mac mini, maintains its connection as well.  The late 2006 mac mini initially starts off with a good connection but within 10-20 minutes after startup, the connection goes bad, and won't return no matter how many times one reboots.  If I shutdown the mac mini and restart it after an hour or so, the connection becomes solid again for about 10-20 minutes.  Interestingly, when the mac mini is in the same room as the router, the connection starts out solid and stays solid. 
    My concern, from what I can tell, is that the basic chassis design of the new mac minis don't appear to be that much different in concept than my late 2006 mac mini, except for missing the CD R/W drive and being more compact.  Is there an inherent design flaw in the mac mini (older and current versions) that degrades wifi connectivity in cases where the mac mini is not within line of site of the router?

  • How to connect a new 27" LED Cinema Display to an older Mac Mini?

    I bought a 27" LED Cinema Display (no Thunderbolt) but don't know how to connect it to my wife's older Mac Mini. I presume the Atlona adaptor is the solution, but I haven't bougt one yet.
    robbert keegel

    The cord attached to the display splits into a Mini DisplayPort, USB, and a MagSafe connector (for powering a laptop).
    There is a separate connector on the back of the display for the AC power cord.
    <http://store.storeimages.cdn-apple.com/2316/as-images.apple.com/is/image/AppleIn c/MC007_AV1?wid=326&hei=326&fmt=jpeg&qlt=95&op_sharpen=0&resMode=bicub&op_usm=0. 5,0.5,0,0&iccEmbed=0&layer=comp>
    <http://store.apple.com/us/product/MC007LL/A>
    "What’s in the Box
    LED Cinema Display
    AC power cord
    Printed documentation"

Maybe you are looking for

  • ***HELP*** My nano wont turn on!

    i pluged my nano into another pc 2 charge it up it didnt turn on or say its charging like it normally does i felt it get really hot so i i pluged it out now it wont turn on at all...........Is my nano dead?

  • Change landscape-and-portrait-folio to landscape-only

    Is it possible after mistakenly having produced a folio with landscape-and-portrait-mode setting it back to landscape-only? In the new content viewer, if a folio is set for both landscpae and folio, but only one layout exists, it shows a grey empty p

  • First confirmed delivery date

    Hello, my customer has a requirement to keep trace of the first confirmed date at schedule line level: the order is first entered in the system, and ATP check gives a first confirmed date at schedule line level. If afterwards (due to production resch

  • Missing Finder (and Finder preferences) icons

    I have an odd issue. I noticed today that the small icons next to the files that done which application the file opens in are gone as are the previews for the file (if I select a PDF the arrows to switch pages work but there's no image preview). Also

  • Page loading weirdness in Edge Animate CC - everything loads at once before disappearing, help!?

    Hi, I've been building a redesign of my website in Edge Animate. Very recently, the page started doing a very strange loading behavior, which is best demonstrated by an example, up here: www.lyellevans.com Essentially, many of the elements seem like