Toshiba WT8-A-102 hdmi problem

I recently bought a Toshiba encore tablet (WT8-A-102, windows 8.1).
However, i can't connect it to an external monitor (tv) via hdmi. I use a micro hdmi to hdmi cable.
The tablet can't recognize the tv.
The tv always displays the message "no signal", and i can't duplicate or extend the tablet screen.
The bios and toshiba drivers are up to date. I have searched the net and i see that this is a common problem.
Any solutions???

Originally Posted by l23bjcc
However, i can't connect it to an external monitor (tv) via hdmi. I use a micro hdmi to hdmi cable.
The tablet can't recognize the tv.
Have you done all the obvious things ? Swipe from the side, devices, project ?
powerpoint also automatically switches on the second display when you start a presentation.
It works for me several times a week with an external projector, a monitor and occasionally I have played with it on a TV.
You can also connect it all up and go through the menus from the desktop under "screen resolution". There is a button for identifying an attached display.

Similar Messages

  • Toshiba WT8-A-102 - Power Issues

    Toshiba WT8-A-102 PDW09E-00100EEN
    Hi
    I tried to raise a warranty call but got stuck in some Q&A loop which dropped out, and it presented me with an email form. Duly filled in with all the pertinent details, but I didn't receive any email acknowledgement.
    Anyone know of a SIMPLE way of just raising a ticket, under warranty, for a tablet where I've got the S/N and P/N and Purchase Order records on file?
    My son's tablet is still under warranty - it was ordered at the end of February last year and was received in March - but we're now having issues with it. More often than not, if my son or I press the power button we briefly get the Toshiba POST screen before the power cuts out.
    We have even left the tablet in a desk cradle when powering it on, so the charging cable and tablet itself do not move between attempts- and sometimes it'll power on without us touching it after numerous attempts where nothing happened when we pressed the on button.
    We've swapped the cables with known good ones, so we know that's not the issue.
    On the rare occasion it stays powered long enough to get past the login screen he still can't do anything with it because the power cuts out as soon as the CPU gets put under any load. On one occasion Windows said the battery was at 0% but charging. I left it for 15 minutes and it was still at 0%. I then set it to do some Windows Updates without disturbing the laptop or power lead, and the power cut out less than a minute later. For obvious reasons this rules out the possibility of performing any BIOS updates; we simply can't risk bricking it.
    So any ideas? Personally I'd rather trade it in for a laptop and pay the difference, but I'd settle for a warranty repair if only I had some way of submitting one that'd send me an email back!

    Your tablet is still under warranty this is good news because in case of hardware problems, the tablet should be fixed free of charge.
    What you have to do now is to contact the Toshiba authorized service provider in your country to arrange next steps.
    Here you will find the ASP responsible for your region:
    http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • Device won't start, even after charging (WT8-B-102)

    I recently bought a Toshiba WT8-B-102 and i have some problems with it.
    First of all i couldn't install the BIOS update for some reason, but that isn't a huge problem for the tablet works fine
    but now i can't start it anymore. yesterday i had the same problem, left the Tab alone for a while, (on the charger) and after that it didn't start/boot. half an hour later i tried again (after taking it of the charger) and then it started, but today it won't start at all. Even if i charge it for some hours, then try it again, try to start it while being charged, etc. This is not good right?
    I also don't see some led burning or any other sign when i attach it to the charger. Any ideas or help guys?
    Thanks

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • How to connect Encore WT8-B-102 to the TV

    hi,
    I have toshiba encore wt8 b 102. I dont have micro hdmi, only micro usb. How can I connect my tablet to tv (no wifi) ?
    Message was edited by: kropek

    According to the Toshiba ENCORE WT8-A-102 specification page, the table supports the micro HDMI out port.
    This port can be used in order to connect the table to the TVs HDMI IN port.
    Of course this requires the usage of micro HDMI to HDMI cable

  • Forgot password on Encore WT8-A-102

    Hi, everyone! I forgot the password on my Toshiba Encore WT8-A-102 tablet and I don't have a recovery USB FlashDrive. Please someone help me with the password reset...

    Originally Posted by Eldorado
    You don’t need a recovery USB flash drive to recover the Win 8 tablet.
    You can start the recovery using the HDD recovery procedure.
    If you want to access the boot menu on Toshiba Windows 8 / 8.1 tablet devices and you don't have a keyboard attached please press and hold the "Vol+" button and turn on the device.
    After a few seconds the boot option menu will appear. Select "HDD Recovery" and the rest of the procedure is similar to the Windows 8 recovery process.
    http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
    handy info there Eldorado , cheers

  • MacBook Pro Retina 13' HDMI Problem

    Hi all,
    Two weeks ago I discovered a problem with the HDMI output on my external monitor (LG IPS 234) when connected to a MacBook Pro Retina 13'. The monitor wasn't able to display greyscale information. E.g. the underlying greyscales of a Google preview search suggestion when hovering a mouse over the suggestions. Also the whole monitor display looked washed out and fuzzy. I thought it would be a problem with the monitor, so I hauled it back to the store. We checked the monitor with a MBPR 15' and everything was fine (screens not in sync - important see below). I started thinking the new 13' MBPR might be the issue. But before leaving the store and blaming my MBPR 13' we checked out another 13' MBPR and (supprise!) the same effect again. To double check we tried another external monitor from Samsung (ok, I know if Samsung is not working with an Apple MBPR...). But seriously... The same effect again.
    I contacted the Apple support and after discussing this with the 1st level (with little helpful tips ... SMB reset etc.) I was forwarded to the 2nd level. The guy wasn't able to help me either. He blamed my monitor and that it might need a firmware update. The problem could be linked with some incompatible HDCP. But a firmware update can only be done by the monitor vendor or a service partner and LG doesn't even indicate that this is possible at all.
    Now my question is, does anybody else experience problems with external IPS displays and the MBPR 13'?
    As I said, we tested it with 2 different MBPR 13' and 2 monitors from different vendors. In each combination the same problem. Always the same effect. For me this is an indication that there might be a bigger problem under the surface.
    Kird
    PS: a friend with a MPBR 15' has the same effect but only when the internal and the external IPS monitor is in sync
    PS: the Apple 2nd level support promised me to give me a call regarding further steps to solve the problem (with a fixed date on Monday this week) ... They never called... Poor service Apple!

    Hello Daniel,
    I gave Apple a call last week and asked for a feedback on my ticket. The guy I talked to at least tried to help me with the issue. In the meantime since my last attempt to receive something from Apple nothing has happened on the issue. Surprise! So we started from 0 again... Ok... Bought in customer with a decent pain level...
    I received some test tools from the guy that I ran on the MPPR creating an encrypted file (...yes I can imagine what you think and I can assure you I had similar thoughts...) and mailed this stuff back to Apple. Now that they have insight of my whole digital live (ok I distend it a bit, but in reply to my question what's all included in this file the guy mentioned something like "don't worry only technical stuff..." Ah yea... That's why it is encrypted... You might find an info about a malfunction in the HDMI inside... very confident... Ok... What you all do for a chance of solving an HDMI problem).
    So the current status is: Apple engineers are spending nights in the office to dig into whatever this tools squeezed out of my innocent MacBook. You see I have reached a state where I am slowly drifting into sarcasm ;-)
    The guy mentioned there might ! be a patch coming with the next release if Apple finds the issue important enough ! and ! enough other customers have the problem as well. And on this I am not kidding. That's what he said.
    Hmm... Will 3 customers be enough? I doubt it... We'll find out with the next release. Maybe we can increase the complains from release to release and empirically estimate when Apple starts taking customers seriously.
    My personal guess is that they will dismount the HDMI port and send us an aluminum plug that fits perfectly in the hole. I have a flashback... There was once an issue with an antenna and they offered a piece of plastic to...
    I am getting carried away so I better stop now :-) and return to my wine
    Let's stay in touch if you find out something on the GB
    Kird

  • Mavericks HDMI Problem with Atomos H2S

    I have recently come across a problem with Mavericks interfacing with a Atomos H2S that converts a HDMI signal to a HD-SDI Signal. I have used this device for the past couple of years and since upgrading two of my MacBook Pros to Mavericks, the Atomos H2S shows errors that it cannot recognise the signal. The exact same computer that before Mavericks worked perfectly. I have tested with other MacBooks and have found the same problem only with Mavericks.
    I am aware people have had HDMI problems with certain monitors once upgrading to Mavericks but no one has posted about an Atomos H2S. Seems like a problem with Mavericks if it can't interface HDMI protocol with certain products that it could previously with.
    Any suggestions on how to fix this problem without going back to Mountain Lion?

    DVI seems to work perfectly fine though.

  • Encore 2 WT8-B-102 - GPS availability

    Now that I have the new 1.90 BIOS I tried to install the GPS Driver as I found conflicting info weather the device has GPS and the GPS driver is avaialble in the relevant download section.
    Guess when I do get the message when installing: "Machine configuration not supported" that there is really no GPS....?
    Regards,
    Rainer

    Thanks, thought so....
    Toshiba then should change the driver details since in the driver download section for the device there is a GPS driver available stating it is for the models Toshiba WT10PE-A, Toshiba WT10-A, Toshiba WT8-B.
    Regards,
    KalleH

  • MSI Media Live - HDMI Problems

    Hi all
    Hope somebody can help?
    Got a little problem with this system when connected via HDMI cable.
    On boot up it displays the Windows Start up info (not sure the correct term) and the logo saying Windows XP loading, but then get a blank screen. If I change over to scart all is OK I can see the desktop.
    Possibly something daft, but it has beat me.
    Many thanks
    Kevin
    MSI Media Live AM2 Barebone
    Kingston 2GB KIT (2X1GB) DDR2 667MHz/PC2-5300
    Samsung SpinPoint HD501LJ 500GB SATAII Hard Drive
    AMD Athlon 64 X2 4800+ Socket AM2 (2.5GHz)
    Windows XP Pro

    Sorted the HDMI problem.... thanks for the help Stu 
    - I installed, uninstalled, installed, uninstalled and installed the drivers finally got desktop working with HDMI cable. But, now no audio at all not even through scart  no startup sounds, no audio through cd player, but when I test in the Realtek High Definition Audio Driver R1.47 I get its stereo test sound  .  Here goes with the audio drivers 
    Cheers Kev

  • Mac Mini to Toshiba 32C120U (HDMI to HDMI) problem

    My Toshiba 32" 32C120U is not getting video signal from my Mac Mini. I bought the Mini for my son and this is his TV. I have hooked up the Mini to my older 22" Toshiba and my 56" Samsung with the same HDMI cable and it works great on both. What the heck is wrong with my son's 32" Toshiba? I have called Toshiba customer support and they won't help with my question without a $35 charge because I'm just out of the year warranty . . some customer support that is !!! I really don't know what they would be able to tell me other than thanks for your $35 and sorry we can't help you. I did update the firmware on the TV and the Mac Mini has been completely updated as well.
    I have also tried both HDMI 1 and HDMI 2 ports with his Xbox with success, so both ports work. I have also tried both ports with the Mac Mini and there is "no video signal" on both ports. I noticed that when I hooked up the Mini to the other TVs it automatically selects the best video setting, so there is obviously some communication that happens between the Mini and TV, but that is not happening with my son's TV.
    Any suggestions would be greatly appreciated.
    Thanks in advance,
    John

    Toshiba 32" 32C120U
    Display Resolution: 1366x768 (720p)
    Refresh Rate: 60Hz
    Monitor's  port layout:
    Video Graphics Array (VGA) ( not recommended)
    2x High Definition Multimedia Interface (HDMI)
    (Supports 1080p/24/60), HDMI-CEC
    The Mini's port layout:
    Orange : High Definition Multimedia Interface (HDMI) cable connect to HDMI above
    Black :     Mini DisplayPort/TB to HDMI adaptor  to connect to HDMI above
    Try  the Apple Store's recomended Mini DisplayPort to HDMI Adapter.

  • Micro USB to HDMI adapter support on Encore 2 WT8-B-102

    I would like to know, if there is any chance to connect this tablet to TV/Monitor through the micro usb port by attaching a micro usb to HDMI adapter? If yes, is there any specific adapter being compatible with this Tablet device?
    Thanks for the support
    Alex

    First of all it’s not possible to use USB port (micro USB) in order to output the video signal. The USB port does not support such functionality.
    According to the tablet's specification page the WT8-B does not support video out interface (HDMI etc..) and therefore it's not possible to connect it directly to the TV device.

  • Toshiba Encore 2 WT8-B-102 running Hot!

    Hi there,
    Is it noticeable when u surf on Web, or doing regular things on the Tablet, like Facebook, etc that it's running a little hot on the back upper side?
    I wanna know if it's normal, or my unit is faulty
    Thanks a lot guys, i love the Tablet, it's so Smooth a really nice product.

    I have two Toshiba Encore 2 tablets. One runs cool while the ohter gets hot just by browseing the web i say its faluty

  • XRANDR HDMI problem NVIDIA Optimus proprietary

    Hi,
    Can someone help me understand why when I switch the audio to HIMI the frequency is accelerated? I followed the wiki about the sampling frequency of pulseaudio but has no effect. in practice, the audio is slightly accelerated it seems one octave above. Sorry for my English but I'm using google. I'm Italian.
    Update: I noticed that the video is slightly sped up. only when I pass by HDMI. I am using the proprietary drivers from NVIDIA.
    Update1: Another issue concerns xrandr. when I launch the command xrandr i see only a portion of screen in laptop monitor (3/4 of screen is blasck and the only fouth      visible is
                   passed to HDMI).  I need a mirror of laptop screen over HDMI with different resolution. If I disable the main screen and use only HDMI it's ok but with audio and video speed
                   problem.
    Summary:
    HDMI only works if I do xrandr --off on the main monitor. So it works but with accelerated video and audio.
    if i active both screens I just get a portion visible in the monitor of the laptop (1/4visible 3/4 black) and the visible portion occupies the entire screen over HDMI.
    Update2: I noticed that all the outputs are associated to modesetting
    Update3: I noticed that if i power the lapotop with the HDMI monitor connected after grub boot i have the problem of laptop's screen visible area. At this moment i believe that the
                   problem depend to modesetting module driver.
    My question is: is it possible to change modesetting to xf86-video-intel one? Because if i try to install intel driver i have a conflict between mesa-libgl and nvidia-libgl.
    xrandr --listproviders
    Providers: number : 2
    Provider 0: id: 0x2d9 cap: 0x1, Source Output crtcs: 0 outputs: 0 associated providers: 1 name:NVIDIA-0
    Provider 1: id: 0x47 cap: 0x2, Sink Output crtcs: 3 outputs: 5 associated providers: 1 name:modesetting
    xorg.log WW
    [foxx@arch ~]$ grep WW /var/log/Xorg.0.log
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23908.923] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23908.923] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 23908.923] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 23908.923] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 23908.927] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23908.989] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 23909.163] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 23909.316] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
    [ 23909.316] (WW) modesetting(G0): Option "RenderAccel" is not used
    [ 23909.316] (WW) modesetting(G0): Option "NoRenderExtension" is not used
    [ 23909.316] (WW) modesetting(G0): Option "AllowGLXWithComposite" is not used
    [ 23909.316] (WW) modesetting(G0): Option "AddARGBGLXVisuals" is not used
    [ 23909.316] (WW) modesetting(G0): Option "DamageEvents" is not used
    [ 23909.316] (WW) modesetting(G0): Option "ConnectToAcpid" is not used
    xorg.log EE
    $ grep EE /var/log/Xorg.0.log
    [ 21200.976] Current Operating System: Linux arch 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21201.034] Initializing built-in extension MIT-SCREEN-SAVER
    [ 21201.065] (EE) Screen 1 deleted because of no matching config section.
    [ 21201.675] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 21201.675] (EE) NVIDIA(0): Failed to complete mode change
    xorg.log HDMI
    $ grep HDMI /var/log/Xorg.0.log
    [ 23908.923] (**) |-->Screen "nvidia_HDMI" (1)
    [ 23908.923] (==) No monitor specified for screen "nvidia_HDMI".
    [ 23909.238] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 23909.239] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
    [ 23909.315] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 23909.315] (II) modesetting(G0): Printing probed modes for output HDMI-1-0
    [ 23909.316] (II) modesetting(G0): EDID for output HDMI-1-1
    [ 23909.723] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
    [ 23909.723] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
    [ 23909.723] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
    full log:
    cat /var/log/Xorg.0.log
    [ 21200.967]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 21200.973] X Protocol Version 11, Revision 0
    [ 21200.974] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 21200.976] Current Operating System: Linux arch 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    [ 21200.976] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1e5256cb-4f67-4b01-8a6f-237f615fcc8a rw rcutree.rcu_idle_gp_delay=1
    [ 21200.980] Build Date: 14 April 2014 08:39:09AM
    [ 21200.981]
    [ 21200.983] Current version of pixman: 0.32.4
    [ 21200.987] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 21200.987] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21200.994] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 24 20:35:41 2014
    [ 21200.996] (==) Using config file: "/etc/X11/xorg.conf"
    [ 21200.998] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 21200.998] (==) ServerLayout "layout"
    [ 21200.998] (**) |-->Screen "nvidia" (0)
    [ 21200.998] (**) | |-->Monitor "<default monitor>"
    [ 21200.998] (**) | |-->Device "nvidia"
    [ 21200.998] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
    [ 21200.998] (**) |-->Screen "nvidia_HDMI" (1)
    [ 21200.998] (**) | |-->Monitor "<default monitor>"
    [ 21200.998] (**) | |-->Device "nvidia"
    [ 21200.998] (==) No monitor specified for screen "nvidia_HDMI".
    Using a default monitor configuration.
    [ 21200.998] (**) |-->Inactive Device "intel"
    [ 21200.998] (==) Automatically adding devices
    [ 21200.998] (==) Automatically enabling devices
    [ 21200.998] (==) Automatically adding GPU devices
    [ 21200.998] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21200.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21200.998] Entry deleted from font path.
    [ 21200.998] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21200.998] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 21200.998] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 21200.998] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 21200.998] (II) Loader magic: 0x804c80
    [ 21200.998] (II) Module ABI versions:
    [ 21200.998] X.Org ANSI C Emulation: 0.4
    [ 21200.998] X.Org Video Driver: 15.0
    [ 21200.998] X.Org XInput driver : 20.0
    [ 21200.998] X.Org Server Extension : 8.0
    [ 21200.998] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 21200.998] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 21201.002] (--) PCI:*(0:0:2:0) 8086:0416:1028:05fe rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 21201.002] (--) PCI: (0:2:0:0) 10de:0fe4:1028:05fe rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 21201.002] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 21201.004] Initializing built-in extension Generic Event Extension
    [ 21201.006] Initializing built-in extension SHAPE
    [ 21201.008] Initializing built-in extension MIT-SHM
    [ 21201.009] Initializing built-in extension XInputExtension
    [ 21201.011] Initializing built-in extension XTEST
    [ 21201.013] Initializing built-in extension BIG-REQUESTS
    [ 21201.015] Initializing built-in extension SYNC
    [ 21201.017] Initializing built-in extension XKEYBOARD
    [ 21201.019] Initializing built-in extension XC-MISC
    [ 21201.021] Initializing built-in extension SECURITY
    [ 21201.023] Initializing built-in extension XINERAMA
    [ 21201.024] Initializing built-in extension XFIXES
    [ 21201.026] Initializing built-in extension RENDER
    [ 21201.028] Initializing built-in extension RANDR
    [ 21201.030] Initializing built-in extension COMPOSITE
    [ 21201.032] Initializing built-in extension DAMAGE
    [ 21201.034] Initializing built-in extension MIT-SCREEN-SAVER
    [ 21201.036] Initializing built-in extension DOUBLE-BUFFER
    [ 21201.037] Initializing built-in extension RECORD
    [ 21201.039] Initializing built-in extension DPMS
    [ 21201.041] Initializing built-in extension Present
    [ 21201.043] Initializing built-in extension DRI3
    [ 21201.045] Initializing built-in extension X-Resource
    [ 21201.047] Initializing built-in extension XVideo
    [ 21201.049] Initializing built-in extension XVideo-MotionCompensation
    [ 21201.050] Initializing built-in extension XFree86-VidModeExtension
    [ 21201.052] Initializing built-in extension XFree86-DGA
    [ 21201.054] Initializing built-in extension XFree86-DRI
    [ 21201.056] Initializing built-in extension DRI2
    [ 21201.056] (II) LoadModule: "glx"
    [ 21201.056] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 21201.063] (II) Module glx: vendor="NVIDIA Corporation"
    [ 21201.063] compiled for 4.0.2, module version = 1.0.0
    [ 21201.063] Module class: X.Org Server Extension
    [ 21201.063] (II) NVIDIA GLX Module 337.25 Tue May 27 12:21:38 PDT 2014
    [ 21201.064] Loading extension GLX
    [ 21201.064] (II) LoadModule: "nvidia"
    [ 21201.064] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 21201.064] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 21201.064] compiled for 4.0.2, module version = 1.0.0
    [ 21201.064] Module class: X.Org Video Driver
    [ 21201.064] (II) LoadModule: "modesetting"
    [ 21201.065] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 21201.065] (II) Module modesetting: vendor="X.Org Foundation"
    [ 21201.065] compiled for 1.15.0, module version = 0.8.1
    [ 21201.065] Module class: X.Org Video Driver
    [ 21201.065] ABI class: X.Org Video Driver, version 15.0
    [ 21201.065] (II) NVIDIA dlloader X Driver 337.25 Tue May 27 12:01:55 PDT 2014
    [ 21201.065] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 21201.065] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 21201.065] (++) using VT number 1
    [ 21201.065] (II) Loading sub module "fb"
    [ 21201.065] (II) LoadModule: "fb"
    [ 21201.065] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 21201.065] (II) Module fb: vendor="X.Org Foundation"
    [ 21201.065] compiled for 1.15.1, module version = 1.0.0
    [ 21201.065] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.065] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 21201.065] (II) Loading sub module "wfb"
    [ 21201.065] (II) LoadModule: "wfb"
    [ 21201.065] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 21201.065] (II) Module wfb: vendor="X.Org Foundation"
    [ 21201.065] compiled for 1.15.1, module version = 1.0.0
    [ 21201.065] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.065] (II) Loading sub module "ramdac"
    [ 21201.065] (II) LoadModule: "ramdac"
    [ 21201.065] (II) Module "ramdac" already built-in
    [ 21201.065] (II) modesetting(1): using drv /dev/dri/card0
    [ 21201.065] (II) modesetting(G0): using drv /dev/dri/card0
    [ 21201.065] (EE) Screen 1 deleted because of no matching config section.
    [ 21201.065] (II) UnloadModule: "modesetting"
    [ 21201.065] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 21201.065] (==) NVIDIA(0): RGB weight 888
    [ 21201.065] (==) NVIDIA(0): Default visual is TrueColor
    [ 21201.065] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 21201.065] (**) NVIDIA(0): Option "ConstrainCursor" "off"
    [ 21201.065] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
    [ 21201.066] (**) NVIDIA(0): Enabling 2D acceleration
    [ 21201.235] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 21201.237] (II) NVIDIA(0): NVIDIA GPU GeForce GT 750M (GK107) at PCI:2:0:0 (GPU-0)
    [ 21201.237] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 21201.237] (--) NVIDIA(0): VideoBIOS: 80.07.b3.00.10
    [ 21201.237] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 21201.237] (--) NVIDIA(0): Valid display device(s) on GeForce GT 750M at PCI:2:0:0
    [ 21201.237] (--) NVIDIA(0): none
    [ 21201.237] (II) NVIDIA(0): Validated MetaModes:
    [ 21201.237] (II) NVIDIA(0): "NULL"
    [ 21201.237] (**) NVIDIA(0): Virtual screen size configured to be 16384 x 16384
    [ 21201.237] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 21201.237] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 21201.237] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
    [ 21201.237] (==) modesetting(G0): RGB weight 888
    [ 21201.237] (==) modesetting(G0): Default visual is TrueColor
    [ 21201.237] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
    [ 21201.237] (II) modesetting(G0): Output eDP-1-0 has no monitor section
    [ 21201.261] (II) modesetting(G0): Output VGA-1-0 has no monitor section
    [ 21201.312] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 21201.312] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
    [ 21201.312] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
    [ 21201.312] (II) modesetting(G0): EDID for output eDP-1-0
    [ 21201.312] (II) modesetting(G0): Manufacturer: SHP Model: 13f8 Serial#: 0
    [ 21201.312] (II) modesetting(G0): Year: 2013 Week: 34
    [ 21201.312] (II) modesetting(G0): EDID Version: 1.4
    [ 21201.312] (II) modesetting(G0): Digital Display Input
    [ 21201.312] (II) modesetting(G0): 8 bits per channel
    [ 21201.312] (II) modesetting(G0): Digital interface is DisplayPort
    [ 21201.312] (II) modesetting(G0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 21201.312] (II) modesetting(G0): Gamma: 2.20
    [ 21201.312] (II) modesetting(G0): No DPMS capabilities specified
    [ 21201.312] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 21201.312] (II) modesetting(G0): Default color space is primary color space
    [ 21201.312] (II) modesetting(G0): First detailed timing is preferred mode
    [ 21201.312] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
    [ 21201.313] (II) modesetting(G0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
    [ 21201.313] (II) modesetting(G0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
    [ 21201.313] (II) modesetting(G0): Manufacturer's mask: 0
    [ 21201.313] (II) modesetting(G0): Supported detailed timing:
    [ 21201.313] (II) modesetting(G0): clock: 373.2 MHz Image Size: 346 x 194 mm
    [ 21201.313] (II) modesetting(G0): h_active: 3200 h_sync: 3248 h_sync_end 3280 h_blank_end 3360 h_border: 0
    [ 21201.313] (II) modesetting(G0): v_active: 1800 v_sync: 1803 v_sync_end 1808 v_blanking: 1852 v_border: 0
    [ 21201.313] (II) modesetting(G0): 6RGW0LQ156Z1
    [ 21201.313] (II) modesetting(G0): Unknown vendor-specific block 0
    [ 21201.313] (II) modesetting(G0): EDID (in hex):
    [ 21201.313] (II) modesetting(G0): 00ffffffffffff004d10f81300000000
    [ 21201.313] (II) modesetting(G0): 22170104a52313780ede50a3544c9926
    [ 21201.313] (II) modesetting(G0): 0f505400000001010101010101010101
    [ 21201.313] (II) modesetting(G0): 010101010101cd9180a0c00834703020
    [ 21201.313] (II) modesetting(G0): 35005ac2100000180000001000000000
    [ 21201.313] (II) modesetting(G0): 00000000000000000000000000fe0036
    [ 21201.313] (II) modesetting(G0): 52475730804c513135365a3100000000
    [ 21201.313] (II) modesetting(G0): 0002010328001200000b010a2020001b
    [ 21201.313] (II) modesetting(G0): Printing probed modes for output eDP-1-0
    [ 21201.313] (II) modesetting(G0): Modeline "3200x1800"x60.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
    [ 21201.313] (II) modesetting(G0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 21201.313] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 21201.337] (II) modesetting(G0): EDID for output VGA-1-0
    [ 21201.389] (II) Quirked EDID physical size to 0x0 cm
    [ 21201.389] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 21201.389] (II) modesetting(G0): Manufacturer: ONK Model: b62 Serial#: 0
    [ 21201.389] (II) modesetting(G0): Year: 2011 Week: 0
    [ 21201.389] (II) modesetting(G0): EDID Version: 1.3
    [ 21201.389] (II) modesetting(G0): Digital Display Input
    [ 21201.389] (II) modesetting(G0): Indeterminate output size
    [ 21201.389] (II) modesetting(G0): Gamma: 2.40
    [ 21201.389] (II) modesetting(G0): No DPMS capabilities specified
    [ 21201.389] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 21201.389] (II) modesetting(G0): First detailed timing is preferred mode
    [ 21201.389] (II) modesetting(G0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
    [ 21201.389] (II) modesetting(G0): blueX: 0.514 blueY: 0.077 whiteX: 0.312 whiteY: 0.329
    [ 21201.389] (II) modesetting(G0): Supported established timings:
    [ 21201.389] (II) modesetting(G0): 640x480@60Hz
    [ 21201.389] (II) modesetting(G0): 800x600@60Hz
    [ 21201.389] (II) modesetting(G0): 1024x768@60Hz
    [ 21201.389] (II) modesetting(G0): Manufacturer's mask: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 85.5 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 21201.389] (II) modesetting(G0): Monitor name: TX-NR609
    [ 21201.389] (II) modesetting(G0): Ranges: V min: 23 V max: 60 Hz, H min: 26 H max: 68 kHz, PixClock max 155 MHz
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 21201.389] (II) modesetting(G0): Supported detailed timing:
    [ 21201.389] (II) modesetting(G0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 21201.389] (II) modesetting(G0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 21201.389] (II) modesetting(G0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 21201.389] (II) modesetting(G0): Number of EDID sections to follow: 1
    [ 21201.389] (II) modesetting(G0): EDID (in hex):
    [ 21201.389] (II) modesetting(G0): 00ffffffffffff003dcb620b00000000
    [ 21201.389] (II) modesetting(G0): 001501038010098c0ae5b1a355499983
    [ 21201.389] (II) modesetting(G0): 13505421080001010101010101010101
    [ 21201.389] (II) modesetting(G0): 010101010101662150b051001b304070
    [ 21201.389] (II) modesetting(G0): 3600a05a0000001e011d007251d01e20
    [ 21201.389] (II) modesetting(G0): 6e285500a05a0000001e000000fc0054
    [ 21201.389] (II) modesetting(G0): 582d4e523630390a20202020000000fd
    [ 21201.389] (II) modesetting(G0): 00173c1a440f000a202020202020012d
    [ 21201.389] (II) modesetting(G0): 02033cf153841305140312101f202122
    [ 21201.389] (II) modesetting(G0): 06150f1e0a19242638097f070f7f0717
    [ 21201.389] (II) modesetting(G0): 07503f06c04d02005706005f7e016754
    [ 21201.389] (II) modesetting(G0): 00834f000066030c00250080011d00bc
    [ 21201.389] (II) modesetting(G0): 52d01e20b8285540a05a0000001e011d
    [ 21201.389] (II) modesetting(G0): 8018711c1620582c2500a05a0000009e
    [ 21201.389] (II) modesetting(G0): 011d80d0721c1620102c2580a05a0000
    [ 21201.389] (II) modesetting(G0): 009e0000000000000000000000000043
    [ 21201.389] (II) modesetting(G0): Printing probed modes for output HDMI-1-0
    [ 21201.389] (II) modesetting(G0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x576"x50.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x576i"x50.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480"x60.0 108.11 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480"x59.9 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480i"x60.0 54.05 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "2880x480i"x59.9 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480"x60.0 54.05 1440 1472 1596 1716 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480"x59.9 54.00 1440 1472 1596 1716 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21201.389] (II) modesetting(G0): EDID for output DisplayPort-1-0
    [ 21201.389] (II) modesetting(G0): EDID for output HDMI-1-1
    [ 21201.389] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 21201.389] (==) modesetting(G0): DPI set to (96, 96)
    [ 21201.389] (II) Loading sub module "fb"
    [ 21201.389] (II) LoadModule: "fb"
    [ 21201.390] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 21201.390] (II) Module fb: vendor="X.Org Foundation"
    [ 21201.390] compiled for 1.15.1, module version = 1.0.0
    [ 21201.390] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.390] (II) Loading sub module "shadow"
    [ 21201.390] (II) LoadModule: "shadow"
    [ 21201.390] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 21201.390] (II) Module shadow: vendor="X.Org Foundation"
    [ 21201.390] compiled for 1.15.1, module version = 1.1.0
    [ 21201.390] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 21201.390] (--) Depth 24 pixmap format is 32 bpp
    [ 21201.390] (==) modesetting(G0): Backing store enabled
    [ 21201.390] (==) modesetting(G0): Silken mouse enabled
    [ 21201.390] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 21201.390] (==) modesetting(G0): DPMS enabled
    [ 21201.390] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
    [ 21201.671] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 21201.671] (II) NVIDIA: access.
    [ 21201.675] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 21201.675] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 21201.675] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 21201.675] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 21201.675] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 21201.675] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 21201.675] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 21201.675] (II) NVIDIA(0): Config Options in the README.
    [ 21201.675] (II) NVIDIA(0): Setting mode "NULL"
    [ 21201.675] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 21201.675] (EE) NVIDIA(0): Failed to complete mode change
    [ 21201.735] Loading extension NV-GLX
    [ 21201.742] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 21201.742] (==) NVIDIA(0): Backing store enabled
    [ 21201.742] (==) NVIDIA(0): Silken mouse enabled
    [ 21201.742] (==) NVIDIA(0): DPMS enabled
    [ 21201.742] Loading extension NV-CONTROL
    [ 21201.742] (II) Loading sub module "dri2"
    [ 21201.742] (II) LoadModule: "dri2"
    [ 21201.742] (II) Module "dri2" already built-in
    [ 21201.742] (II) NVIDIA(0): [DRI2] Setup complete
    [ 21201.742] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 21201.742] (--) RandR disabled
    [ 21201.748] (II) Initializing extension GLX
    [ 21201.749] (II) modesetting(G0): Damage tracking initialized
    [ 21201.775] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 21201.775] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21201.775] (II) LoadModule: "evdev"
    [ 21201.775] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 21201.776] (II) Module evdev: vendor="X.Org Foundation"
    [ 21201.776] compiled for 1.15.1, module version = 2.9.0
    [ 21201.776] Module class: X.Org XInput Driver
    [ 21201.776] ABI class: X.Org XInput driver, version 20.0
    [ 21201.776] (II) Using input driver 'evdev' for 'Power Button'
    [ 21201.776] (**) Power Button: always reports core events
    [ 21201.776] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 21201.776] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 21201.776] (--) evdev: Power Button: Found keys
    [ 21201.776] (II) evdev: Power Button: Configuring as keyboard
    [ 21201.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 21201.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 21201.776] (**) Option "xkb_rules" "evdev"
    [ 21201.776] (**) Option "xkb_model" "pc104"
    [ 21201.776] (**) Option "xkb_layout" "it"
    [ 21201.776] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.788] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 21201.788] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 21201.788] (II) Using input driver 'evdev' for 'Video Bus'
    [ 21201.788] (**) Video Bus: always reports core events
    [ 21201.788] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 21201.788] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 21201.788] (--) evdev: Video Bus: Found keys
    [ 21201.788] (II) evdev: Video Bus: Configuring as keyboard
    [ 21201.788] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
    [ 21201.788] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 21201.788] (**) Option "xkb_rules" "evdev"
    [ 21201.788] (**) Option "xkb_model" "pc104"
    [ 21201.788] (**) Option "xkb_layout" "it"
    [ 21201.788] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.788] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
    [ 21201.788] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 21201.788] (II) Using input driver 'evdev' for 'Video Bus'
    [ 21201.788] (**) Video Bus: always reports core events
    [ 21201.788] (**) evdev: Video Bus: Device: "/dev/input/event3"
    [ 21201.788] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 21201.788] (--) evdev: Video Bus: Found keys
    [ 21201.788] (II) evdev: Video Bus: Configuring as keyboard
    [ 21201.788] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input3/event3"
    [ 21201.788] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 21201.788] (**) Option "xkb_rules" "evdev"
    [ 21201.788] (**) Option "xkb_model" "pc104"
    [ 21201.788] (**) Option "xkb_layout" "it"
    [ 21201.788] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.788] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 21201.789] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 21201.789] (II) Using input driver 'evdev' for 'Power Button'
    [ 21201.789] (**) Power Button: always reports core events
    [ 21201.789] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 21201.789] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 21201.789] (--) evdev: Power Button: Found keys
    [ 21201.789] (II) evdev: Power Button: Configuring as keyboard
    [ 21201.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
    [ 21201.789] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 21201.789] (**) Option "xkb_rules" "evdev"
    [ 21201.789] (**) Option "xkb_model" "pc104"
    [ 21201.789] (**) Option "xkb_layout" "it"
    [ 21201.789] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.789] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 21201.789] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 21201.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
    [ 21201.789] (II) No input driver specified, ignoring this device.
    [ 21201.789] (II) This device may have been added with another device file.
    [ 21201.789] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event14)
    [ 21201.789] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
    [ 21201.789] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
    [ 21201.789] (**) Integrated_Webcam_HD: always reports core events
    [ 21201.789] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event14"
    [ 21201.789] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x573c
    [ 21201.789] (--) evdev: Integrated_Webcam_HD: Found keys
    [ 21201.789] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
    [ 21201.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input16/event14"
    [ 21201.790] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
    [ 21201.790] (**) Option "xkb_rules" "evdev"
    [ 21201.790] (**) Option "xkb_model" "pc104"
    [ 21201.790] (**) Option "xkb_layout" "it"
    [ 21201.790] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.790] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event6)
    [ 21201.790] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 21201.790] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 21201.790] (**) USB OPTICAL MOUSE: always reports core events
    [ 21201.790] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event6"
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Vendor 0 Product 0x538
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found relative axes
    [ 21201.790] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
    [ 21201.790] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
    [ 21201.790] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
    [ 21201.790] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 21201.790] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 21201.790] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0000:0538.0001/input/input7/event6"
    [ 21201.790] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 11)
    [ 21201.790] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 21201.790] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 21201.790] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 21201.790] (II) No input driver specified, ignoring this device.
    [ 21201.790] (II) This device may have been added with another device file.
    [ 21201.790] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 21201.790] (II) No input driver specified, ignoring this device.
    [ 21201.790] (II) This device may have been added with another device file.
    [ 21201.790] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
    [ 21201.790] (II) No input driver specified, ignoring this device.
    [ 21201.790] (II) This device may have been added with another device file.
    [ 21201.791] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
    [ 21201.791] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 21201.791] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 21201.791] (**) AT Translated Set 2 keyboard: always reports core events
    [ 21201.791] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
    [ 21201.791] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 21201.791] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 21201.791] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 21201.791] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
    [ 21201.791] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 21201.791] (**) Option "xkb_rules" "evdev"
    [ 21201.791] (**) Option "xkb_model" "pc104"
    [ 21201.791] (**) Option "xkb_layout" "it"
    [ 21201.791] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.791] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 21201.791] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 21201.791] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event15"
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found 1 mouse buttons
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 21201.791] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 21201.791] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 21201.791] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 21201.791] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 21201.791] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
    [ 21201.791] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 21201.791] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 21201.791] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 21201.791] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 21201.791] (II) No input driver specified, ignoring this device.
    [ 21201.791] (II) This device may have been added with another device file.
    [ 21201.791] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
    [ 21201.791] (II) No input driver specified, ignoring this device.
    [ 21201.791] (II) This device may have been added with another device file.
    [ 21201.792] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
    [ 21201.792] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 21201.792] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 21201.792] (**) Dell WMI hotkeys: always reports core events
    [ 21201.792] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event9"
    [ 21201.792] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 21201.792] (--) evdev: Dell WMI hotkeys: Found keys
    [ 21201.792] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 21201.792] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event9"
    [ 21201.792] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
    [ 21201.792] (**) Option "xkb_rules" "evdev"
    [ 21201.792] (**) Option "xkb_model" "pc104"
    [ 21201.792] (**) Option "xkb_layout" "it"
    [ 21201.792] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 21201.798] (II) modesetting(G0): EDID vendor "SHP", prod id 5112
    [ 21201.798] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21201.798] (II) modesetting(G0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
    [ 21201.875] (II) Quirked EDID physical size to 0x0 cm
    [ 21201.876] reporting 3 5 56 458
    [ 21201.894] have a master to look out for
    [ 21201.894] adjust shatters 0 3200
    [ 21201.898] need to create shared pixmap 1have a master to look out for
    [ 21202.498] need to create shared pixmap 1(II) modesetting(G0): EDID vendor "SHP", prod id 5112
    [ 21203.343] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.343] (II) modesetting(G0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
    [ 21203.419] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.419] reporting 3 5 56 458
    [ 21203.539] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.539] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21203.539] (II) modesetting(G0): Using hsync ranges from config file
    [ 21203.539] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21203.539] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.539] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21203.539] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.539] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21203.539] reporting 3 5 56 458
    [ 21203.649] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.649] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21203.649] (II) modesetting(G0): Using hsync ranges from config file
    [ 21203.649] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21203.649] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.649] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21203.649] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.649] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21203.649] reporting 3 5 56 458
    [ 21203.725] (II) Quirked EDID physical size to 0x0 cm
    [ 21203.725] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21203.725] (II) modesetting(G0): Using hsync ranges from config file
    [ 21203.725] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21203.725] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21203.725] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21203.725] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21203.725] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21203.726] reporting 3 5 56 458
    [ 21210.172] (II) Quirked EDID physical size to 0x0 cm
    [ 21210.172] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21210.172] (II) modesetting(G0): Using hsync ranges from config file
    [ 21210.172] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21210.172] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21210.172] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21210.172] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21210.172] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21210.173] reporting 3 5 56 458
    [ 21210.337] reporting 3 5 56 458
    [ 21214.902] (II) Quirked EDID physical size to 0x0 cm
    [ 21214.902] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21214.902] (II) modesetting(G0): Using hsync ranges from config file
    [ 21214.902] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21214.902] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21214.902] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21214.902] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21214.902] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21214.903] reporting 3 5 56 458
    [ 21214.904] have a master to look out for
    [ 21214.942] need to create shared pixmap 1reporting 3 5 56 458
    [ 21215.145] (II) Quirked EDID physical size to 0x0 cm
    [ 21215.145] (II) modesetting(G0): EDID vendor "ONK", prod id 2914
    [ 21215.145] (II) modesetting(G0): Using hsync ranges from config file
    [ 21215.145] (II) modesetting(G0): Using vrefresh ranges from config file
    [ 21215.145] (II) modesetting(G0): Printing DDC gathered Modelines:
    [ 21215.145] (II) modesetting(G0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz eP)
    [ 21215.145] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "2880x480i"x0.0 54.00 2880 2956 3204 3432 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 21215.145] (II) modesetting(G0): Modeline "2880x576i"x0.0 54.00 2880 2928 3180 3456 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 21215.146] (II) modesetting(G0): Modeline "2880x576"x0.0 108.00 2880 2928 3184 3456 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 21215.146] (II) modesetting(G0): Modeline "1920x1080i"x0.0 72.00 1920 1952 2120 2304 1080 1126 1136 1250 interlace +hsync -vsync (31.2 kHz e)
    [ 21215.146] reporting 3 5 56 458
    [ 21215.147] reporting 3 5 56 458
    [ 21215.147] reporting 3 5 56 458
    [ 21215.149] (II) modesetting(G0): EDI

    foxx81 wrote:...P.S. I'm sorry.I have yet posted it on newbie corner and I don't know how to delete it.
    I have closed and dust binned the other thread.  You might want to read my moderator comments there.
    As to this problem, this is a new one on me.  Be patient, someone will help.  Try providing a bit more information if you can.
    I do agree, this is not a 'Newbie' issue.
    Last edited by ewaller (2014-06-24 20:24:22)

  • Mini-DVI to HDMI Problem

    Hi, I bought a Mini-DVI to HDMI adapter like this one: http://www.hdtvsupply.com/mini-dvi-to-hdmi.html to be able to hook up my macbook (2007 white version) to my HDTV. However, since HDMI is traditionally for both video AND audio, the HDMI channel on the TV can only output audio coming in through the HDMI cable. There is no sound, because I am only feeding video through that channel.
    To solve the issue, I purchased the following 6ft 3.5mm Stereo Plug/2 RCA Plug Cable: http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10218&cs_id=1021804 &p_id=665&seq=1&format=1#largeimage. The problem is, that I am only able to play sound from my laptop on my HDTV on one channel, and video from the Mini-DVI to HDMI adapter on another, but not both audio and video at the same time. What is the SIMPLEST way to fix this? I wouldn't want to purchase any additional cables if possible
    Many thanks for your help in advance!!!

    Thanks for that. I have a Y adapter (3.5mm stereo headphone jack to RCA sound just like you said). Under input options on my TV, I can select either HDMI1 input (which gives me video only) or AV1/S input (which gives me audio only) - not both at once...Could you explain how I can get stereo audio on my TV?

  • Toshiba Model 40E220U - Not HDMI friendly with my Wii U

    My dad has a Toshiba HDTV (Model 40E220U) which is almost a year old from now. While it is HDMI-friendly with everything that is HDMI compatible, it is not being very friendly to my Wii U video game console, but only when it uses 1080p resolution graphics. When I play my Wii U at 1080i, it works perfectly fine.
    The problem with my dad's TV is that when I use my Wii U at 1080p resolution, I sometimes get 2-second screen black outs, and some static lines that follow up with the black-out problem. I tried resetting the TV to factory settings to solve the problem, but it didn't work. I even updated the TV recently, but it still didn't make it Wii U-friendly.
    To those of you who have a Wii U like me, are you facing this same problem? I also need Toshiba to know that our 40E220U TV model needs a new update to fix the problem I'm having with it. Thank you.

    You may want to call customer support at (800) 631-3811.
    - Peter

Maybe you are looking for

  • Saving FileName in Database

    Hi, I have implemented a Proxy Service from type File on my Project and I want to save the name of the file along with the data in the database. My problem is that I don't know how I can manage to save the fileName in DB. I have created WS to save th

  • Using multi-threading: Setting a VI to be used for two sequences at same time

    I have two sequences running as two different threads. This is supposed to be in parallel but both sequences access the same VI, then they're not executing as parallel because one sequence use this VI then liberates it and the other sequence use it,

  • RFC in Web Dynpro

    Hi experts, I am using RFC to get data from other sap system 4.6 into my ECC. To do this i created a logical destination system with user name and password. Now while we run the application, data for the user defined in the logical destination alone

  • Self or powered generic USB port, works on every OS except Leopard...

    I've got a puzzling one. I just ordered some nice 4 port USB hubs, that run on bus power, or self powered with an AC adapter. First thing I did was plug it into my MacBook, and plug in my external HD and ram drive. They did not mount. So I grabbed th

  • Coping a word table in Numbers wont work

    I have been trying to copy a Word table (e.g. 3x3) with numbers into pages to calculate sums. When I paste into numbers, all the 3 colums appear one under the other in one column. What I had to do was to copy the table in Excel then back to Numbers f