$TOSIMG$....The destination you specified does not exist

Any ideas how to get around this problem trying to restore a Satellite Netbook from a USB stick.  No joy so far whatsoever.  Also, intermittently, the hard drive disappears from the BIOS list!
Any help, greatly appreciated.

Would I have been better off posting this in the General
Discussion section? Could the moderators move it if so,
please?

Similar Messages

  • The collection you specified does not exists or is not registered with the ColdFusion Search Service.

    While upgrading to CF7 from CF5, I am creating the new collections from Cf Admin. After creating, I indexed it from cf admin and then trying to search for the documents in that collection, and i am getting the following error. This was working yesterday. I have cheched the logs etc and nothing seems helpful in discovering what the issue is.
    Document count is 11,745 and the size is 25,948 kb, which is not too much for a collection. I have tried to restart Cold Fusion Search Services and then ColdFusion Application services, but all in vain.
    Any help on this would be greatly appreciated.
    Detail
    The collection you specified does not exists or is not registered with the ColdFusion Search Service.
    Message
    The collection rc_collectiom does not exist.
    StackTrace
    coldfusion.tagext.search.CollectionDoesNotExistException: The collection rc_collectiom does not exist. at coldfusion.tagext.search.SearchTag.verifyLocale(SearchTag.java:819) at coldfusion.tagext.search.SearchTag.doSearch(SearchTag.java:200) at coldfusion.tagext.search.SearchTag.doStartTag(SearchTag.java:159) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfeFull2dText2dReDirect2ecfm511389924.runPage(C:\Inetpub\wwwroot\External\FullText\eFull- Text-ReDirect.cfm:43) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfApplication2ecfc179940445$funcONREQUEST.runFunction(C:\Inetpub\wwwroot\External\Applica tion.cfc:114) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:169) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:194) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:146) at coldfusion.runtime.AppEventInvoker.invoke(AppEventInvoker.java:72) at coldfusion.runtime.AppEventInvoker.onRequest(AppEventInvoker.java:178) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:215) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115) at coldfusion.CfmServlet.service(CfmServlet.java:107) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    So at last I figured this out myself and found a temporary resolution for this kind of problem. Majority of the times try creating the Collection through Cfcollection tag and then index it using cfindex tag, rather than performing these operations from the Cold Fusion 7 administrator.
    The only reason I can think of which might have caused the issue is – I have thousands of documents in the collection which I indexed. So while indexing the page gets expired. So I tried again to index it. This time the collection got indexed fairly quickly and I got the response that the collection has been indexed successfully. So for the first time when I tried to index the collection, there might be some piece of code, which did not register the collection properly and hence giving this error.
    When I did the same function using the code, with exactly same set of documents, it did not throw any error, even when I executed it for the first time. So the collection indexed properly.
    I am not claiming that technically this theory is correct, but this seems to be the problem.
    If someone knows technically what has happened at the back, please share it. For the time being, this is the fix – if you experience any problem in creating/indexing collections through cfadmin in CF7, do it thorough code.

  • CF8 Verity "The collection you specified does not exist or is not registered with the ColdFusion Search Service."

    I'm running ColdFusion 8 Enterprise on linux. I'm able to
    create collections and index them through cfadmin as well as in cfm
    application pages, but when trying to search I get the error
    "The collection you specified does not exist or is not
    registered with the ColdFusion Search Service."
    I'm using the collection name in cfsearch and not the full
    path.

    Would I have been better off posting this in the General
    Discussion section? Could the moderators move it if so,
    please?

  • The access edge server you specified does not exist

    Hi,
    I am trying to enable federation with Skype. I have Skype4B (Lync) 2013. unfortunately when I go to prvisioning site at https://pic.lync.com and try to enter my access edge server, it says: "The
    Access Edge service FQDN you specified does not exist."
    Does anyone have any idea why? searched online but apparently there are not answers.
    Thanks,

    Hi Atif7865,
    The SIP domain and the Access Edge server must be active, functioning, and reachable on the network.
    Please double check the DNS records and network , make sure they are functioning properly.
    If the error message persists, please contact Microsoft Customer Support Services to get help. For a complete list of Microsoft Customer Support Services telephone numbers and information,
    visit the following Microsoft website:
    https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Error 'The location you entered does not exist or is flagged as inactive.'

    Hi
    In iRecruitment, when Employee Candidate applies for any job, we are getting the error 'The location you entered does not exist or is flagged as inactive.' And it stops employee from applying to any jobs. We are in 11.5.10.2 version.
    Appreciate any pointers on the same.
    Thanks
    Alagappan
    Edited by: user5733015 on Dec 19, 2009 8:35 PM

    Hi Hussein
    Thanks for the update.
    I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
    Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
    Can you give me some insights 'What could be the actual problem'?
    Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
    Appreciate all your help.
    Thanks
    Alagappan

  • Sorry, the page you requested does not exist.

    I've been struggling for a couple of weeks attempting to get my domains hosted with my mobile.me account with little success. After trying about everything and I believe they have me blocked now on Chat support, it is now unavailable due to overwhelming interest in mobile.me. I've created my sites on iWeb and published them and when I go to view them I get "Sorry, the page you requested does not exist." Anyone have any ideas?

    Hi Mark,
    The site may have been unavailable for a short time. The links function correctly for me at the moment. Please confirm if you are still having this issue.
    Regards,
    Les

  • "The file you selected does not exist" when the file definitely exists?

    Hi all,
    Using Contribute CS3 against Contribute Publishing Server--
    I have the site uploaded and set up within Contribute and
    CPS. But I am experiencing consistent "The selected file
    does not exist" errors whenever I try to open most
    documents within the site. I click the "Choose"
    button, navigate to a file -- I can see its contents in the
    "Preview" box within the Choose dialog -- and
    when I click "OK", I get that file does not exist
    error.
    This is happening with most but not all files in my site
    tree. Trying to find a common denominator, it certainly does seem
    that files which trigger this error are all templated files.
    Non-templated files open fine.
    Contribute is configured to talk to the server (IIS) via
    WebDAV.. Am trying to get the sysadmins to enable FTP to see if
    this behavior also shows up then, but have not been able to get
    this done yet.
    Thanks all :-)
    Reuben

    Would I have been better off posting this in the General
    Discussion section? Could the moderators move it if so,
    please?

  • Open Directory-The user name you entered does not exist

    Can someone help please? I am having some issues with my open directory server.None of the Network users can log in.The dns is ok.The ldap mapping to the server works fine.But when i access the shared home directories of the network users through workgroup manager, i notice that each user has lost the permissions to his/her home folder, the owner portion is empty.if i click on user/groups and drag the user to the owner portion to assign read/write priviledge it tells me "unable to make changes,the username you entered does not exist".I mac am running Mac OS Server 10.3.9

    Hi Hussein
    Thanks for the update.
    I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
    Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
    Can you give me some insights 'What could be the actual problem'?
    Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
    Appreciate all your help.
    Thanks
    Alagappan

  • Help me soon please: error:1065 the database specified does not exist.

    hello every one,
    when i start the computer the concurrent manager service not started , when i try to start it i have this problem:
    "could not start the oracle concmgrvis_orabac service on local computer error:1065 the database specified does not exist."
    i restarted computer and tried to stop and start all services more times but no change.
    i hope if you can help meplease soon.

    check note How to Recreate the Concurrent Manager Service for Oracle Applications 11i on Windows NT
    Note:152887.1
    maybe recreting the CM will solve your issue
    Follow these steps to recreate the concurrent manager service on Windows NT:
    1. cd $APPL_TOP
    2. dos> envshell.cmd (this opens up a new DOS window. Go to that window and
    do the following).
    3. cd $COMMON_TOP/admin/install
    4. dos> adsvcm.cmd -deinstall (deinstalls the ccm service)
    should exit with status '0'
    5. dos> adsvcm.cmd
    should exit with status '0'
    Should see "Successfully installed concurrent manager"
    6. Reboot
    fadi
    .

  • Error 1065 The database specified does not exist

    Hi All,
    When I am trying the start the Concurrent Manager [[From Services.msc]] I am getting this error.
    Error 1065 The database specified does not exist
    I am also not able to connect through SQL* Plus.
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi,
    Thanks to both of you. I don't have metalink access right now.
    Hussein
    It's my Desktop. For quite sometime I have not run it and Now when I am opening the Apps I am not able to login.
    Also I don't have much idea where to check the CM log file????
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • 'Destination 'orgFilterService' either does not exist or the destination  has no channels defined

    Hi,
    My code connects to remote object using the destination id as 'orgFilterService'. This was working fine, but all of a sudden it has started giving the below mentioned fault message.
    fault--> [MessagingError message='Destination 'orgFilterService' either does not exist or the destination has no channels defined (and the application does not define any default channels.)']...detail : Couldn't establish a connection to 'orgFilterService'...errorID : 0...faultCode : InvokeFailed
    I am creating the build in Flash builder, and it works fine in my local machine when run from flash builder; whereas, when moved to a UNIX box, it starts giving this error. Again, this was working fine in the UNIX box also before this build.
    I have verified the entries in remoting-config and servivecs config - both are fine, and are untouched since from the last time it was working. Also, it is able to connect to other destination id, but not to this!!
    Entry in remoting-config:
        <default-channels>
            <channel ref="my-amf"/>
        </default-channels>
    <destination id="orgFilterService">
      <properties>
       <source>com.jpmorganchase.pfitr.boreport.DrillOrganizationReport</source>
      </properties>
    </destination>
    Entry in services-config:
            <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
                <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
            </channel-definition>
    Changing the build doesnt resolve this error.Please let me know if any kind of refresh needs to be done or any temp files/cache needs to be removed.
    Thanks,
    Vipul Sharma

    Ok, I'll get that a shot. I know the docs talk about using the project creation wizard, but I really would like to be able to just drop in Blaze as some jars and config files. So doing this by hand is my preferred method. Is there any docs talking about setting up Flex Builder projects to work with Blaze? Like the way you're telling me or is what you're showing me it. Because up to this point I've just added stuff to web.xml, create /flex/configs.xml files, and now this compiler param. I have not replaced the {server.context} etc tokens or anything in the configs. Do I need to change that? I saw some posts talking about using full paths instead of tokens, but that would make it a pain to deploy. However when I tried to set those like the post said, the compiler complained about setting those params twice. I'm guessing that means they're already set? However I would think those url prams would need to be relative so I can move my application from localhost to my domain.com server, right?

  • Error 'The application id or shortname (-1) you entered does not exist.'

    Hello,
    When I run the OA page it opens without any errors,but I delegate to Other page for insert record it showing following Error
    , Please help me to resolve this error.
    oracle.apps.fnd.framework.OAException: The application id or shortname (-1) you entered does not exist.
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
         at OA.jspService(_OA.java:87)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
         at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
         at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
         at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:392)
         at OA.jspService(_OA.java:80)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Regards,
    Kapil

    Helllo Friends,
    Issue get resolved. On page, there was one field with Item Style 'MessageLOVInput' and I had not given a source for 'External LOV' to that field.
    Thanks,
    Kapil

  • OAException: The application id or shortname () you entered does not exist.

    Hi all,
    I've tried to create an LOV. The steps I've taken are as follows:
    1. Create a new Business Component (BC)
    2. Inside the BC create a new AM
    3. Inside the BC create a new VO
    4. Attach the VO to the AM
    5. Create a new XML (XML_new) in the project
    6. Attach the AM to the AM definition
    7. Add a results table to the XML_new
    8. Change a search field in the old XML (XML_old) to be MessageLOV
    9. Attach XML_new to XML_old in the external LOV field
    10. Map the fields of the XML_old to the XML_new
    I've come up with the following error. Can someone help in telling me what I've done wrong. Much appreciation.
    oracle.apps.fnd.framework.OAException: The application id or shortname () you entered does not exist.
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1960)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    oracle.apps.fnd.framework.OAException: The application id or shortname () you entered does not exist.
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:5464)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:958)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    oracle.apps.fnd.framework.OAException: The application id or shortname () you entered does not exist.
         at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:5464)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:958)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)

    Can you please checked your package name .
    /oracle/apps/<productshortname>/
    Thanks, Avaneesh

  • Error submitting form for Distribution: "The filename you specified is not valid because it does not

    Error submitting form for Distribution:
    "The filename you specified is not valid because it does not include a .pdf extension, contains one or more invalid characters or teh path preceding it refers to a protected system location."
    Tried removing dashes from filename, shortenign filename, moving to root directory. No changes. File ends with a .pdf extension.
    This is my first attempt to distribute via acrobat.com

    I found that I got that same message using Acrobat Professional to send out a document for shared review.  I had an exclamation mark in the title of the PDF. When I took out the exclamation mark, it worked.
    So maybe try taking out anything "unusual" (parentheses, dashes, exclamation marks, etc.) in the file name and see if that helps.
    Good luck,
       Philip.

  • Destination 'DefaultHTTP' either does not exist or the destination has no channels defined

    Okay, I'm pretty new to Flex, so go easy on me.  I had a trial of Flex Builder several months ago, but the project I was going to use it on never happened and my employer won't spring for the $250 license.  Alas...
    Now I have a real project for which I need to learn.  It's a form that will send data to a C# app that will put that data in a text file or XML file.  At this point I just have a tiny app for figuring it out.  My C# app works fine and my Flex app is almost working fine except for the transferring of the data.  I've attached my MXML file.  When I compile and run the app and then click the Submit button, I'm told "Destination 'DefaultHTTP' either does not exist or the destination has no channels defined".  Bummer.  I've tried to read up on channels, but I don't understand what I'm reading very well.  Where am I going wrong?
    Bonus for Adobe folks: if I can figure this out, there's a stronger chance I can convince my boss that Flex Builder is a good investment.

    By the way, if I change useProxy to false, I get: Error #2148: SWF file file:////WWW2/docs/dev/flex/data%5Ftest/test1.swf cannot access local resource file:////WWW2/docs/dev/flex/data%5Ftest/WriteTextFromFlex/Default.aspx. Only local-with-filesystem and trusted local SWF files may access local resources.
    Jeremy

Maybe you are looking for