Toslink Optical out of Sony 707esD CD player into the Audio in/optical dig

How's everyone? Been a while. I don't have a GB question per say but since this is the forum I know best I'm going to ask my audio question here.
I'm taking the Toslink Optical out of my Sony 707esD CD player into the Audio in/optical digital audio in port of my March 2009 iMac.
In System preferences>Sound>Input>Digital in Optical digital-in port I see a signal occurring on the input level meter but I do not hear audio.
Output is headphones port and is working fine from other sources.
I see a signal input does anyone know how to hear the output.
Thanks.

I found this free app that will let me pass thru.
LineIn.
http://www.rogueamoeba.com/freebies/

Similar Messages

The ppt animations doesn't pause in the player but the audio does.

I've imported an animated PPT into Captivate 7. The audio is added into Captivate. After publishing the project. The ppt animations doesn't pause in the player but the audio does. When you click the play button again the audio and animations are out of aliment. Is there any way to make the PPT animations pause in the player?

Im on a Mac. Adobe Captivate 7 & PPT Office 2011.
The animations in Power Point are timed to go with audio. One animation is with previous. Building out bullet lists with graphics.
Lisa

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I ha e some educational videos that belong in "Podcasts." Help?

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I have some educational videos that belong in "Podcasts." Help?

Select/highlight the ones that you want to change in your iTunes library, do Get-Info (control-I) and change their Media Kind on their Options tab to 'Music Video' - and then similarly for the podcasts.

I have an iMac running OSX 10.6.8 and updated to the latest flash player but the audio on youtube music still won't respond. Any suggestions besides buying a new computer?

I have an eight year old iMac running OSX 10.6.8 and just installed the latest Flash Player but the audio won't play on the youtube music website. What else do I need to update or install to listen to the music?

just installed the latest Flash Player
Did you uninstall all the previous versions of Adobe Flash Player? Did you repair permissions and restarted your computer after the installation?
Which browser & version are you using? Have you tried other browsers?
Please advise.

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

When using full volume on my iphone 4s the sounds cuts out but if I blow air into the speaker it comes back on is this a hardware issue or a software issue?

Just recently my iphone 4s speakers started acting up. I have restored it twice once to a back up and the other time as a new phone. The speakers get really staticy on full volume and then it cuts out but if I turn down the volume and blow air into the speakers it goes back to play fine until I turn up the volume again. I'm going to try to clean it out with a toothbrush and see if that helps. But I'm curious does this seem more like a hardware problem or is it a problem with the operating system and I should try to hold out until ios 6 comes out and see if that helps. I've read all the problems with this so I'm hesitant to send it in since there is no apple store around here and find out I have to pay to get it fixed. Tried to talk to them on the phone but since it's a week past ninety days I would have to purchase apple care in order to get any help but yet that's only available for 30 days after your purchase so I'm not sure how come they can offer that over the phone. Thanks for any help.

Thanks for the help. The problem just started suddenly. The problem I have is the closest Apple Store is 3 hours away so I would have to send it in and I don't want to send it to them and then be told I'd have to pay for it. Would they just send the phone back if you decide not to have it fixed. I will probably just get used to it or maybe it will fix itself one day.

What is the audio in/optical audio port for ?

I scan thru my iMac manual & found that I have not use my audio in/optical audio port.
What is that port for ?
Can I connect a mic to it & do a voice over in FCE ? If yes, then is this a better method or using a USB mic is better ?
Thnaks

MartinR wrote:
The audio-in port supports both analog audio input & optical digital input. It can be used with almost any audio source including microphones, tape decks, cd players, dvd players, mixers, etc. including mic level and line level sources. The quality of the audio will be dependent on the quality of your audio source. It is neither better nor worse than a USB based audio source per se.
Yes, you can connect a microphone to the audio-in port. The quality of the audio will be dependent on the quality of your mic. If you have a good mic the results should be as good through the audio-in port as it would be via USB provided your USB device is capable of producing good audio.
Thanks Martin for the answers !!
Really appreciate it, thanks

I have two Yahoo e-mail addresses & Firefox kicks me out of one and puts me into the other after only a few minutes!!! It doesn't happen with Explorer!!!

When I open one in a few minutes Firefox closes it and opens the other one. It doesn't happen when I use Internet Explorer. It must be something to do with Firefox! Maybe I have some kind of e-mail access plugin that only recognizes one but not the other?
I like using Firefox but this is annoying. How can we correct it?
Thanks,
Bill ( Interliner )

You can look this extension if you want to sign on with different identities at the same time:
* Multifox: http://br.mozdev.org/multifox/

CD player Toslink optical out to optical digital audio in port. Need help

Hello,
I'm taking the Toslink Optical out of my Sony 707esD CD player into the Audio in/optical digital audio in port of my March 2009 iMac.
In System preferences>Sound>Input>Digital in Optical digital-in port I see a signal occurring on the input level meter but I do not hear audio.
Output is headphones port and is working fine from other sources.
I see a signal input does anyone know how to hear the output.
Thanks.

You need the free LineIn app from Rogue Amoeba.
http://www.rogueamoeba.com/freebies/
Dah•veed

HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davE

Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B

No optical-out sound on MSI KT4-Ultra!!

Hi, I have recently set up a system based on the MSI KT4-Ultra board. I'm using an Athlon XP 1700+, a Radeon 9000 video card, and I've installed Windows 98.
Although all the drivers and audio applications which MSI provided installed fine, and 2-channel audio from the on-board sound chip works great both for music and for the 3-4 games I've installed so far, I can't seem to get the optical SPDIF port to work! I bought a cable and connected the computer to my Sony MD-player and attempted to copy my CDs onto MD. I go into the MSI control panel and check the box to enable SPDIF-out, removing the speaker cable from the analog line-out just for good measure. When I plug the optical cable into my MD it recognises digital input and prepares for recording. I press record on the MD and play on the computer's CD-player app, but the MD LED shows "no signal". I'm pretty sure both the MD recorder and cable are OK since I've used them to copy CDs from a Kenwood portable CD-player quite recently, so it must be the MB that's giving me problems. Indeed, when I've stopped playback in the CD-player app and went back into the audio control panel, I found that the SPDIF box had been unchecked of its own accord. I've tried this several times, and I've unplugged the S-bracket and reinstalled it all over again just to make sure it was plugged in properly, and I still get the same problem. All audio works fine except optical out! Haven't got a coaxial cable or recorder so I can't check if the coaxial port is equally buggered or if it's just the optical, but I'm getting really annoyed here: this was the one feature I liked best about this board and the only one which isn't working! Any ideas, anyone?

dude, i think i can get u ur signal, but currently i can only get silent recordings, u may have better luck.
on the minidisc, there should be a switch or button that will toggle synchronised recording on and off, turning it off should get u a signal, but it wont be in sync wiv the cd, ie u cant trust it to form track gaps.
hope that helps, done flame me if it dont, if i manage to get substance to my recording, i will send u the info just in case.
take it easy

Use of optical out on new macmini dual core

I bought a new ~Belkin optical cable. It fits perfectly in my macmini and my bose 321 system. This 321 system has an optical entry. But ....
the description by the mac how to get the mac to use the optical out is not told. It is told to select optical out in the configuration screen under sound. I don't have this option! Ithought the updat of the minimac would have solved the problem, but it didn't. Please help me! I want to use this optical cable, so that I can use the bose system in combination with the minimac!
Kind regards David Rietveld

With the exception, as noted of the DVD player, it's System Preferences>Sound>Output. Make sure you used the mini-toslink/optical adapter and that the cable is securely snapped into an INPUT port on your bose system. Everything will be (as noted) auto-detected, and you should see the option:
Digital Out Built - In Output
Select it. If you have multiple adapters for sound (ex a usb audio adapter), then you might want to select the digital output for use only w/ dvd player. Choose where you want your system sound and alerts sent in the other tabs of Sound.
On your bose unit you may have both analog and digital inputs for the same source. I'm not questioning your competence, more my knowledge the equipment you are utilizing. Make sure you select OPTICAL as the input for that source.
For example,
You have buttons for Video 1, Video 2, and DVD. On the back you have a coax digital, a couple of toslink/optical digital connectors and a bunch of RCAs. If you hook up ALL the wires from each device then press Video 1; it MAY just use the analog connections...and since you're ONLY sending digital you won't hear a thing.
If you have 'auto-detect' for analog or digital it probably prioritizes digital over analog and will merely work IF SELECTED. Some systems may do the reverse.
Good Luck,
-j

Enabling Optical-Out on 15-Inch MBP

I am trying to enable Optical-Out on my MBP.
I have installed and connected the TOSLINK cable i bought off monoprice. It says specifically in the description its compatible, i have also read several articles on tis all of which linked to the cable.
I have connected the cable to my MPB, and to my sound system. According to the articles i've read its supposed to enable automatically. It hasn't.
Maybe i am missing something?

Hi Think,
You're right in thinking that it is supposed to enable automatically. There is a sensor inside the port that should detect whether you've got an analog cable or an optical cable plugged in there.
A couple things:
Plug in both ends of the Toslink cable and go to System Preferences --> Sound. Then click the Output tab. See if you can select Toslink or Optical from that list.
If that doesn't work, try plugging the Toslink into the audio input port, and connecting the opposite end to an output source somewhere else (ex: on your TV or audio receiver). Then see if you get any input through the "Line In" audio input in System Preferences. If you do, you know that your audio out port is faulty, and not the cable.
If you don't get anything in either port, I'd probably suspect the cable.
--Travis

Optical out on Airport Express

Can i use ANY min-optical cable to use the optical out, or does it HAVE to be the Apple/Monster cable?
I don't need the whole kit they sell, just the ONE cable, so i'd like to save a few bucks if i can.

Yes, you can use any optical cable, with a TOSLINK-to-minijack adapter. You are not limited to the one offered by Apple.

Optical Out Surround

I hooked up a surround sound receiver to my optical out on my powermac dual g5. I can get it to work with just 2 channels but not with surround? when i switch to digital encoded it stops playing sound. What can I do? I wanted to use the surround to watch DVDs and stuff but it won't work. But I was also wondering can I semi monitor surround sound mixing with this? Since it is the type of encoding that will take place at the viewing. Thanks

You should be able to get a surround signal from your optical out when watching DVD's in DVD Player. VLC Player is a good video program. You can get it here: http://www.videolan.org/vlc/. I've heard more people have better luck with that than with DVD Player.
As far as mixing surround through that optical out, it can't be done. The optical out will only carry an AC3 audio signal. Soundtrack Pro does not have an option to do a realtime AC3 conversion. In fact, I don't think any audio editor does (though I could be wrong.)
What you need is a firewire or USB interface that gives you six discreet channels of audio going to your means of amplification.

Toslink Optical out of Sony 707esD CD player into the Audio in/optical dig

Similar Messages

Maybe you are looking for